From: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
To: Jason Wang <jason77.wang@gmail.com>
Cc: grant.likely@secretlab.ca,
spi-devel-general@lists.sourceforge.net, s.hauer@pengutronix.de,
amit.kucheria@canonical.com,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver
Date: Thu, 2 Sep 2010 10:27:59 +0200 [thread overview]
Message-ID: <20100902082759.GE14214@pengutronix.de> (raw)
In-Reply-To: <1283413924-14210-1-git-send-email-jason77.wang@gmail.com>
Hello Jason,
On Thu, Sep 02, 2010 at 03:51:58PM +0800, Jason Wang wrote:
> Some explanations:
>
> This patchset is to add SPI support in the existing spi_imx driver for
> i.MX51 and add SPI relating stuffs for mx51_3ds board level.
>
> i.MX51 has two eCSPI controllers and one CSPI controller, CSPI
> controller is 100% compatible with the one of i.MX35, so we don't need
> to add new functions for this CSPI, only bind it with i.MX35 together,
> while eCSPI isn't compatible with existing controllers of i.MX
> platforms, so i add new functions for these two eCSPIs in the existing
> spi_imx driver.
>
> If these patches pass review, the first patch 0001-xxx.patch should be
> merged by Grant.likely; other patches(0002-0006) are based off
> imx-for-2.6.37 and should be handled by Sascha.
Unfortunately we (=Pengutronix) have some patches pending to add
mx51-spi support, too. And there are some other patches that will
conflict with your series (e.g. I renamed some symbols used by you:
-#define MX51_CSPI1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x10000)
+#define MX51_ECSPI1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x10000)
-#define MX51_CSPI2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xac000)
+#define MX51_ECSPI2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xac000)
-#define MX51_CSPI3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xc0000)
+#define MX51_CSPI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xc0000)
-#define MX51_MXC_INT_CSPI1 36
-#define MX51_MXC_INT_CSPI2 37
-#define MX51_MXC_INT_CSPI 38
+#define MX51_INT_ECSPI1 36
+#define MX51_INT_ECSPI2 37
+#define MX51_INT_CSPI 38
)
Actually I would prefer our patches, but of course I'm biased :-)
I don't know how we should handle this. And Sascha is on vacation this
and next week. I will investigate if our patches are already free to be
posted.
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
next prev parent reply other threads:[~2010-09-02 8:27 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-02 7:51 [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver Jason Wang
2010-09-02 7:51 ` [PATCH 1/6] spi-imx: add CSPI and eCSPI support for i.MX51 MCU Jason Wang
2010-09-02 7:52 ` [PATCH 2/6] i.MX5/clock: add eCSPI and CSPI clock definitions Jason Wang
2010-09-02 7:52 ` [PATCH 3/6] mx5: add support to dynamically register spi_imx devices (imx51 3ds) Jason Wang
2010-09-02 7:52 ` [PATCH 4/6] mx5/iomux: add iomux definitions for eCSPI2 on the imx51_3ds board Jason Wang
2010-09-02 7:52 ` [PATCH 5/6] mx51_3ds: add eCSPI2 support " Jason Wang
2010-09-02 7:52 ` [PATCH 6/6] mx51_3ds: add SPI NOR flash in the board init stage Jason Wang
2010-09-02 15:05 ` [PATCH 5/6] mx51_3ds: add eCSPI2 support on the imx51_3ds board Uwe Kleine-König
2010-09-03 6:24 ` Jason Wang
2010-09-02 15:02 ` [PATCH 3/6] mx5: add support to dynamically register spi_imx devices (imx51 3ds) Uwe Kleine-König
2010-09-03 6:22 ` Jason Wang
2010-09-02 15:01 ` [PATCH 2/6] i.MX5/clock: add eCSPI and CSPI clock definitions Uwe Kleine-König
2010-09-03 6:22 ` Jason Wang
2010-09-10 9:47 ` Uwe Kleine-König
[not found] ` <20100910094714.GF30558-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2010-09-10 10:04 ` Lothar Waßmann
2010-09-13 3:31 ` Jason Wang
2010-09-02 14:53 ` [PATCH 1/6] spi-imx: add CSPI and eCSPI support for i.MX51 MCU Uwe Kleine-König
2010-09-02 15:11 ` Lothar Waßmann
2010-09-02 17:29 ` Baruch Siach
2010-09-02 17:57 ` Uwe Kleine-König
2010-09-03 8:49 ` Lothar Waßmann
2010-09-03 6:16 ` Jason Wang
2010-09-03 7:54 ` Uwe Kleine-König
2010-09-02 8:27 ` Uwe Kleine-König [this message]
2010-09-02 10:07 ` [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver Jason Wang
2010-09-02 14:39 ` Uwe Kleine-König
2010-09-02 14:41 ` [PATCH 1/6] ARM: mx51: clean up mx51 header Uwe Kleine-König
2010-09-02 14:41 ` [PATCH 2/6] ARM: mx51: fix naming of spi related defines Uwe Kleine-König
2010-09-02 14:42 ` [PATCH 3/6] ARM: imx: change the way spi-imx devices are registered Uwe Kleine-König
2010-09-02 14:42 ` [PATCH 4/6] ARM: mx51: Add spi clock and spi_imx device registration Uwe Kleine-König
[not found] ` <1283438523-19697-4-git-send-email-u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2010-09-03 5:46 ` Jason Wang
2010-09-02 14:42 ` [PATCH 5/6] spi-imx: Add i.MX51 support Uwe Kleine-König
2010-09-09 5:33 ` Grant Likely
2010-09-09 7:27 ` Uwe Kleine-König
2010-09-02 14:42 ` [PATCH 6/6] ARM: mx5/mx51_babbage: Add spi support Uwe Kleine-König
2010-09-03 3:18 ` [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver Jason Wang
2010-09-03 6:41 ` Amit Kucheria
2010-09-03 9:34 ` Robert Schwebel
2010-09-17 9:52 ` Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 01/16] spi/imx: default to m on platforms that have such devices Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 03/16] spi/imx: get rid of more ifs depending on the used cpu Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 12/16] ARM: mx5/clock-mx51: new macro that defines a clk with all members Uwe Kleine-König
[not found] ` <20100917095247.GB30441-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2010-09-17 9:54 ` [PATCH 02/16] spi/imx: convert driver to use platform ids Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 04/16] spi/imx: save the spi chip select in config struct, not the gpio to use Uwe Kleine-König
[not found] ` <1284717274-12850-4-git-send-email-u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2010-09-17 11:11 ` Lothar Waßmann
2010-09-17 11:20 ` Russell King - ARM Linux
2010-09-19 8:47 ` Jason Wang
2010-09-17 9:54 ` [PATCH 05/16] spi/imx: add support for imx51's eCSPI and CSPI Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 06/16] ARM: imx: change the way spi-imx devices are registered Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 07/16] ARM: imx: use platform ids for spi_imx devices Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 08/16] ARM: mx51: clean up mx51 header Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 09/16] ARM: mx51: fix naming of spi related defines Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 10/16] ARM: mx5: add spi_imx device registration Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 11/16] ARM: mx5/clock-mx51: refactor ccgr callbacks to use common code Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 13/16] ARM: mx5/clock-mx51: add spi clocks Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 14/16] ARM: mx5/iomux-mx51: add iomux definitions for eCSPI2 on the imx51_3ds board Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 15/16] ARM: mx5/mx51_3ds: add eCSPI2 support " Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 16/16] ARM: mx5/mx51_3ds: add SPI NOR flash in the board init stage Uwe Kleine-König
2010-09-19 8:53 ` [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver Jason Wang
2010-09-20 15:33 ` Uwe Kleine-König
2010-09-21 1:39 ` Jason Wang
2010-09-24 7:00 ` Grant Likely
2010-09-24 9:11 ` Uwe Kleine-König
2010-09-24 16:12 ` Grant Likely
2010-09-24 18:18 ` Uwe Kleine-König
[not found] ` <20100902143908.GK14214-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2010-10-08 9:24 ` [PATCH 7/6] spi/imx: Support different fifo sizes Uwe Kleine-König
[not found] ` <1286529841-20800-1-git-send-email-u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2010-10-08 16:39 ` Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100902082759.GE14214@pengutronix.de \
--to=u.kleine-koenig@pengutronix.de \
--cc=amit.kucheria@canonical.com \
--cc=grant.likely@secretlab.ca \
--cc=jason77.wang@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=s.hauer@pengutronix.de \
--cc=spi-devel-general@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).