Re: [spi-devel-general] [PATCH] spi/spi_s3c64xx: Warn if PIO transfers time out

[Grant Likely <grant.likely@secretlab.ca>]

On Tue, Aug 24, 2010 at 09:06:40AM +0900, Jassi Brar wrote:
> On Tue, Aug 24, 2010 at 1:40 AM, Mark Brown
> <broonie@opensource.wolfsonmicro.com> wrote:
> > When using PIO we have a timeout for the TX and RX FIFOs to ensure that
> > the data actually gets transferred. Warn if we hit that timeout - it
> > should never happen, but this makes sure we'll find out if it does.
> >
> > Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
> > ---
> >  drivers/spi/spi_s3c64xx.c |    6 ++++++
> >  1 files changed, 6 insertions(+), 0 deletions(-)
> >
> > diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c
> > index 7e627f7..f72e1c0 100644
> > --- a/drivers/spi/spi_s3c64xx.c
> > +++ b/drivers/spi/spi_s3c64xx.c
> > @@ -200,6 +200,9 @@ static void flush_fifo(struct s3c64xx_spi_driver_data *sdd)
> >                val = readl(regs + S3C64XX_SPI_STATUS);
> >        } while (TX_FIFO_LVL(val, sci) && loops--);
> >
> > +       if (loops == 0)
> > +               dev_warn(&sdd->pdev->dev, "Timed out flushing TX FIFO\n");
> > +
> >        /* Flush RxFIFO*/
> >        loops = msecs_to_loops(1);
> >        do {
> > @@ -210,6 +213,9 @@ static void flush_fifo(struct s3c64xx_spi_driver_data *sdd)
> >                        break;
> >        } while (loops--);
> >
> > +       if (loops == 0)
> > +               dev_warn(&sdd->pdev->dev, "Timed out flushing RX FIFO\n");
> > +
> >        val = readl(regs + S3C64XX_SPI_CH_CFG);
> >        val &= ~S3C64XX_SPI_CH_SW_RST;
> >        writel(val, regs + S3C64XX_SPI_CH_CFG);
> 
> Ok, though I'll be very surprised to see the FIFO flush failing. We
> are not waiting
> for data to be transferred, but for SW Reset to make its effect.
> 
> Acked-by: Jassi Brar <jassi.brar@samsung.com>

Applied, thanks.

g.