From mboxrd@z Thu Jan 1 00:00:00 1970 From: Grant Likely Subject: Re: [PATCH] spi_mpc8xxx: fix writing to adress 0 Date: Thu, 16 Sep 2010 14:11:14 -0600 Message-ID: <20100916201114.GA11972@angua.secretlab.ca> References: <20100916070420.95083C7391@messagerie.si.c-s.fr> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: christophe leroy , David Brownell , linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org, spi-devel-general@lists.sourceforge.net To: Joakim Tjernlund Return-path: Content-Disposition: inline In-Reply-To: Sender: linux-kernel-owner@vger.kernel.org List-Id: linux-spi.vger.kernel.org On Thu, Sep 16, 2010 at 09:39:09AM +0200, Joakim Tjernlund wrote: > > From: christophe leroy > > To: David Brownell , Grant Likely > > , spi-devel-general@lists.sourceforge.net, linux- > > kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org > > Date: 2010/09/16 09:06 > > Subject: [PATCH] spi_mpc8xxx: fix writing to adress 0 > > Sent by: linuxppc-dev-bounces+joakim.tjernlund=transmode.se@lists.ozlabs.org > > > > This patch applies to 2.6.34.7 (already included in 2.6.35.4) > > It fixes an issue when sending only or receiving only (mspi->tx-dma was reset > > as when no tx_buf is defined, tx_dma is 0) > > > > Signed-off-by: christophe leroy > > Acked-by: Joakim Tjernlund > You need to send this to the linux-stable list and include the sha1 commit id that fixes it in mainline. Acked-by: Grant Likely g.