linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
To: Jason Wang <jason77.wang@gmail.com>
Cc: grant.likely@secretlab.ca,
	spi-devel-general@lists.sourceforge.net, s.hauer@pengutronix.de,
	amit.kucheria@canonical.com,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver
Date: Fri, 17 Sep 2010 11:52:47 +0200	[thread overview]
Message-ID: <20100917095247.GB30441@pengutronix.de> (raw)
In-Reply-To: <20100902143908.GK14214@pengutronix.de>

Hello,

On Thu, Sep 02, 2010 at 04:39:08PM +0200, Uwe Kleine-König wrote:
> Hello Jason,
> 
> >> Actually I would prefer our patches, but of course I'm biased :-)
> >>
> >> I don't know how we should handle this.  And Sascha is on vacation this
> >> and next week.  I will investigate if our patches are already free to be
> >> posted.
> OK, I can post our patches.  I think the driver part is quite similar,
> the platform part is not.  But look for yourself, I'll post them in reply to
> this mail.  Hopefully we can join forces to get the best out of the two
> approaches.
I now made the effort to try doing this.  I hope this is OK though it
feels strage that no commit is attributed to Sascha.

The following changes since commit 5b1caa2452a2cf09417ab657ae3a2275ebd78103:

  ARM: mx5/mx51_babbage: Add FEC support (2010-09-13 11:31:22 +0200)

are available in the git repository at:
  git://git.pengutronix.de/git/ukl/linux-2.6.git spi-imx51

(5b1caa2452a2cf09417ab657ae3a2275ebd78103 is the result of rebasing
Sascha's for-2.6.37 branch on top of 2.6.36-rc4---done mainly to contain
the for-2.6.36 branch)

Jason Wang (4):
      ARM: mx5/clock-mx51: add spi clocks
      ARM: mx5/iomux-mx51: add iomux definitions for eCSPI2 on the imx51_3ds board
      ARM: mx5/mx51_3ds: add eCSPI2 support on the imx51_3ds board
      ARM: mx5/mx51_3ds: add SPI NOR flash in the board init stage

Uwe Kleine-König (12):
      spi/imx: default to m on platforms that have such devices
      spi/imx: convert driver to use platform ids
      spi/imx: get rid of more ifs depending on the used cpu
      spi/imx: save the spi chip select in config struct, not the gpio to use
      spi/imx: add support for imx51's eCSPI and CSPI
      ARM: imx: change the way spi-imx devices are registered
      ARM: imx: use platform ids for spi_imx devices
      ARM: mx51: clean up mx51 header
      ARM: mx51: fix naming of spi related defines
      ARM: mx5: add spi_imx device registration
      ARM: mx5/clock-mx51: refactor ccgr callbacks to use common code
      ARM: mx5/clock-mx51: new macro that defines a clk with all members

 arch/arm/mach-imx/clock-imx1.c                  |    2 +-
 arch/arm/mach-imx/clock-imx21.c                 |    6 +-
 arch/arm/mach-imx/clock-imx27.c                 |    6 +-
 arch/arm/mach-imx/devices-imx21.h               |    9 +-
 arch/arm/mach-imx/devices-imx27.h               |   12 +-
 arch/arm/mach-mx25/clock.c                      |    6 +-
 arch/arm/mach-mx25/devices-imx25.h              |   12 +-
 arch/arm/mach-mx3/clock-imx31.c                 |    6 +-
 arch/arm/mach-mx3/clock-imx35.c                 |    4 +-
 arch/arm/mach-mx3/devices-imx31.h               |   12 +-
 arch/arm/mach-mx3/devices-imx35.h               |    9 +-
 arch/arm/mach-mx5/Kconfig                       |    1 +
 arch/arm/mach-mx5/board-mx51_3ds.c              |   33 ++
 arch/arm/mach-mx5/clock-mx51.c                  |  113 ++++-
 arch/arm/mach-mx5/devices-imx51.h               |   18 +
 arch/arm/plat-mxc/devices/platform-spi_imx.c    |   89 +++-
 arch/arm/plat-mxc/include/mach/devices-common.h |   11 +-
 arch/arm/plat-mxc/include/mach/iomux-mx51.h     |    5 +
 arch/arm/plat-mxc/include/mach/mx51.h           |  608 +++++++++++------------
 drivers/spi/Kconfig                             |   16 +
 drivers/spi/spi_imx.c                           |  394 ++++++++++++---
 21 files changed, 919 insertions(+), 453 deletions(-)
 create mode 100644 arch/arm/mach-mx5/devices-imx51.h

Thanks
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

  parent reply	other threads:[~2010-09-17  9:52 UTC|newest]

Thread overview: 67+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-09-02  7:51 [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver Jason Wang
2010-09-02  7:51 ` [PATCH 1/6] spi-imx: add CSPI and eCSPI support for i.MX51 MCU Jason Wang
2010-09-02  7:52   ` [PATCH 2/6] i.MX5/clock: add eCSPI and CSPI clock definitions Jason Wang
2010-09-02  7:52     ` [PATCH 3/6] mx5: add support to dynamically register spi_imx devices (imx51 3ds) Jason Wang
2010-09-02  7:52       ` [PATCH 4/6] mx5/iomux: add iomux definitions for eCSPI2 on the imx51_3ds board Jason Wang
2010-09-02  7:52         ` [PATCH 5/6] mx51_3ds: add eCSPI2 support " Jason Wang
2010-09-02  7:52           ` [PATCH 6/6] mx51_3ds: add SPI NOR flash in the board init stage Jason Wang
2010-09-02 15:05           ` [PATCH 5/6] mx51_3ds: add eCSPI2 support on the imx51_3ds board Uwe Kleine-König
2010-09-03  6:24             ` Jason Wang
2010-09-02 15:02       ` [PATCH 3/6] mx5: add support to dynamically register spi_imx devices (imx51 3ds) Uwe Kleine-König
2010-09-03  6:22         ` Jason Wang
2010-09-02 15:01     ` [PATCH 2/6] i.MX5/clock: add eCSPI and CSPI clock definitions Uwe Kleine-König
2010-09-03  6:22       ` Jason Wang
2010-09-10  9:47         ` Uwe Kleine-König
     [not found]           ` <20100910094714.GF30558-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2010-09-10 10:04             ` Lothar Waßmann
2010-09-13  3:31           ` Jason Wang
2010-09-02 14:53   ` [PATCH 1/6] spi-imx: add CSPI and eCSPI support for i.MX51 MCU Uwe Kleine-König
2010-09-02 15:11     ` Lothar Waßmann
2010-09-02 17:29       ` Baruch Siach
2010-09-02 17:57         ` Uwe Kleine-König
2010-09-03  8:49         ` Lothar Waßmann
2010-09-03  6:16     ` Jason Wang
2010-09-03  7:54       ` Uwe Kleine-König
2010-09-02  8:27 ` [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver Uwe Kleine-König
2010-09-02 10:07   ` Jason Wang
2010-09-02 14:39     ` Uwe Kleine-König
2010-09-02 14:41       ` [PATCH 1/6] ARM: mx51: clean up mx51 header Uwe Kleine-König
2010-09-02 14:41       ` [PATCH 2/6] ARM: mx51: fix naming of spi related defines Uwe Kleine-König
2010-09-02 14:42       ` [PATCH 3/6] ARM: imx: change the way spi-imx devices are registered Uwe Kleine-König
2010-09-02 14:42       ` [PATCH 4/6] ARM: mx51: Add spi clock and spi_imx device registration Uwe Kleine-König
     [not found]         ` <1283438523-19697-4-git-send-email-u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2010-09-03  5:46           ` Jason Wang
2010-09-02 14:42       ` [PATCH 5/6] spi-imx: Add i.MX51 support Uwe Kleine-König
2010-09-09  5:33         ` Grant Likely
2010-09-09  7:27           ` Uwe Kleine-König
2010-09-02 14:42       ` [PATCH 6/6] ARM: mx5/mx51_babbage: Add spi support Uwe Kleine-König
2010-09-03  3:18       ` [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver Jason Wang
2010-09-03  6:41         ` Amit Kucheria
2010-09-03  9:34           ` Robert Schwebel
2010-09-17  9:52       ` Uwe Kleine-König [this message]
2010-09-17  9:54         ` [PATCH 01/16] spi/imx: default to m on platforms that have such devices Uwe Kleine-König
2010-09-17  9:54         ` [PATCH 03/16] spi/imx: get rid of more ifs depending on the used cpu Uwe Kleine-König
     [not found]         ` <20100917095247.GB30441-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2010-09-17  9:54           ` [PATCH 02/16] spi/imx: convert driver to use platform ids Uwe Kleine-König
2010-09-17  9:54           ` [PATCH 04/16] spi/imx: save the spi chip select in config struct, not the gpio to use Uwe Kleine-König
     [not found]             ` <1284717274-12850-4-git-send-email-u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2010-09-17 11:11               ` Lothar Waßmann
2010-09-17 11:20                 ` Russell King - ARM Linux
2010-09-19  8:47                   ` Jason Wang
2010-09-17  9:54           ` [PATCH 05/16] spi/imx: add support for imx51's eCSPI and CSPI Uwe Kleine-König
2010-09-17  9:54           ` [PATCH 06/16] ARM: imx: change the way spi-imx devices are registered Uwe Kleine-König
2010-09-17  9:54           ` [PATCH 07/16] ARM: imx: use platform ids for spi_imx devices Uwe Kleine-König
2010-09-17  9:54           ` [PATCH 08/16] ARM: mx51: clean up mx51 header Uwe Kleine-König
2010-09-17  9:54           ` [PATCH 09/16] ARM: mx51: fix naming of spi related defines Uwe Kleine-König
2010-09-17  9:54           ` [PATCH 10/16] ARM: mx5: add spi_imx device registration Uwe Kleine-König
2010-09-17  9:54           ` [PATCH 11/16] ARM: mx5/clock-mx51: refactor ccgr callbacks to use common code Uwe Kleine-König
2010-09-17  9:54           ` [PATCH 13/16] ARM: mx5/clock-mx51: add spi clocks Uwe Kleine-König
2010-09-17  9:54           ` [PATCH 14/16] ARM: mx5/iomux-mx51: add iomux definitions for eCSPI2 on the imx51_3ds board Uwe Kleine-König
2010-09-17  9:54           ` [PATCH 15/16] ARM: mx5/mx51_3ds: add eCSPI2 support " Uwe Kleine-König
2010-09-17  9:54           ` [PATCH 16/16] ARM: mx5/mx51_3ds: add SPI NOR flash in the board init stage Uwe Kleine-König
2010-09-17  9:54         ` [PATCH 12/16] ARM: mx5/clock-mx51: new macro that defines a clk with all members Uwe Kleine-König
2010-09-19  8:53         ` [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver Jason Wang
2010-09-20 15:33           ` Uwe Kleine-König
2010-09-21  1:39             ` Jason Wang
2010-09-24  7:00         ` Grant Likely
2010-09-24  9:11           ` Uwe Kleine-König
2010-09-24 16:12             ` Grant Likely
2010-09-24 18:18               ` Uwe Kleine-König
     [not found]       ` <20100902143908.GK14214-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2010-10-08  9:24         ` [PATCH 7/6] spi/imx: Support different fifo sizes Uwe Kleine-König
     [not found]           ` <1286529841-20800-1-git-send-email-u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2010-10-08 16:39             ` Grant Likely

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100917095247.GB30441@pengutronix.de \
    --to=u.kleine-koenig@pengutronix.de \
    --cc=amit.kucheria@canonical.com \
    --cc=grant.likely@secretlab.ca \
    --cc=jason77.wang@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=s.hauer@pengutronix.de \
    --cc=spi-devel-general@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).