From: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
To: "Uwe Kleine-König"
<u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: Jason Wang <jason77.wang-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
amit.kucheria-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org,
David Jander <david-/Q/L1SwJa3aEVqv0pETR8A@public.gmane.org>,
spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH 7/6] spi/imx: Support different fifo sizes
Date: Fri, 8 Oct 2010 10:39:02 -0600 [thread overview]
Message-ID: <20101008163902.GB3863@angua.secretlab.ca> (raw)
In-Reply-To: <1286529841-20800-1-git-send-email-u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
On Fri, Oct 08, 2010 at 11:24:01AM +0200, Uwe Kleine-König wrote:
> From: David Jander <david-/Q/L1SwJa3aEVqv0pETR8A@public.gmane.org>
>
> The i.MX51 ECSPI has a fifo size of 64 entries instead of 8 entries as
> found on the other cspi bus devices.
>
> Cc: Jason Wang <jason77.wang-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Signed-off-by: David Jander <david-/Q/L1SwJa3aEVqv0pETR8A@public.gmane.org>
> Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Acked-by: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
Please merge via Sascha's branch that already has the other patches.
g.
> ---
> Hello,
>
> this patch depends on patches already acked by Grant Likely and sitting
> in Sascha Hauer's imx-for-2.6.37 branch.
>
> Best regards
> Uwe
>
> drivers/spi/spi_imx.c | 8 +++++++-
> 1 files changed, 7 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c
> index 6bab2cf..55a38e2 100644
> --- a/drivers/spi/spi_imx.c
> +++ b/drivers/spi/spi_imx.c
> @@ -77,6 +77,7 @@ struct spi_imx_devtype_data {
> void (*trigger)(struct spi_imx_data *);
> int (*rx_available)(struct spi_imx_data *);
> void (*reset)(struct spi_imx_data *);
> + unsigned int fifosize;
> };
>
> struct spi_imx_data {
> @@ -541,6 +542,7 @@ static struct spi_imx_devtype_data spi_imx_devtype_data[] __devinitdata = {
> .trigger = mx1_trigger,
> .rx_available = mx1_rx_available,
> .reset = mx1_reset,
> + .fifosize = 8,
> },
> #endif
> #ifdef CONFIG_SPI_IMX_VER_0_0
> @@ -550,6 +552,7 @@ static struct spi_imx_devtype_data spi_imx_devtype_data[] __devinitdata = {
> .trigger = mx27_trigger,
> .rx_available = mx27_rx_available,
> .reset = spi_imx0_0_reset,
> + .fifosize = 8,
> },
> #endif
> #ifdef CONFIG_SPI_IMX_VER_0_4
> @@ -559,6 +562,7 @@ static struct spi_imx_devtype_data spi_imx_devtype_data[] __devinitdata = {
> .trigger = mx31_trigger,
> .rx_available = mx31_rx_available,
> .reset = spi_imx0_4_reset,
> + .fifosize = 8,
> },
> #endif
> #ifdef CONFIG_SPI_IMX_VER_0_7
> @@ -568,6 +572,7 @@ static struct spi_imx_devtype_data spi_imx_devtype_data[] __devinitdata = {
> .trigger = mx31_trigger,
> .rx_available = mx31_rx_available,
> .reset = spi_imx0_4_reset,
> + .fifosize = 8,
> },
> #endif
> #ifdef CONFIG_SPI_IMX_VER_2_3
> @@ -577,6 +582,7 @@ static struct spi_imx_devtype_data spi_imx_devtype_data[] __devinitdata = {
> .trigger = spi_imx2_3_trigger,
> .rx_available = spi_imx2_3_rx_available,
> .reset = spi_imx2_3_reset,
> + .fifosize = 64,
> },
> #endif
> };
> @@ -596,7 +602,7 @@ static void spi_imx_chipselect(struct spi_device *spi, int is_active)
>
> static void spi_imx_push(struct spi_imx_data *spi_imx)
> {
> - while (spi_imx->txfifo < 8) {
> + while (spi_imx->txfifo < spi_imx->devtype_data.fifosize) {
> if (!spi_imx->count)
> break;
> spi_imx->tx(spi_imx);
> --
> 1.7.2.3
>
------------------------------------------------------------------------------
Beautiful is writing same markup. Internet Explorer 9 supports
standards for HTML5, CSS3, SVG 1.1, ECMAScript5, and DOM L2 & L3.
Spend less time writing and rewriting code and more time creating great
experiences on the web. Be a part of the beta today.
http://p.sf.net/sfu/beautyoftheweb
prev parent reply other threads:[~2010-10-08 16:39 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-02 7:51 [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver Jason Wang
2010-09-02 7:51 ` [PATCH 1/6] spi-imx: add CSPI and eCSPI support for i.MX51 MCU Jason Wang
2010-09-02 7:52 ` [PATCH 2/6] i.MX5/clock: add eCSPI and CSPI clock definitions Jason Wang
2010-09-02 7:52 ` [PATCH 3/6] mx5: add support to dynamically register spi_imx devices (imx51 3ds) Jason Wang
2010-09-02 7:52 ` [PATCH 4/6] mx5/iomux: add iomux definitions for eCSPI2 on the imx51_3ds board Jason Wang
2010-09-02 7:52 ` [PATCH 5/6] mx51_3ds: add eCSPI2 support " Jason Wang
2010-09-02 7:52 ` [PATCH 6/6] mx51_3ds: add SPI NOR flash in the board init stage Jason Wang
2010-09-02 15:05 ` [PATCH 5/6] mx51_3ds: add eCSPI2 support on the imx51_3ds board Uwe Kleine-König
2010-09-03 6:24 ` Jason Wang
2010-09-02 15:02 ` [PATCH 3/6] mx5: add support to dynamically register spi_imx devices (imx51 3ds) Uwe Kleine-König
2010-09-03 6:22 ` Jason Wang
2010-09-02 15:01 ` [PATCH 2/6] i.MX5/clock: add eCSPI and CSPI clock definitions Uwe Kleine-König
2010-09-03 6:22 ` Jason Wang
2010-09-10 9:47 ` Uwe Kleine-König
[not found] ` <20100910094714.GF30558-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2010-09-10 10:04 ` Lothar Waßmann
2010-09-13 3:31 ` Jason Wang
2010-09-02 14:53 ` [PATCH 1/6] spi-imx: add CSPI and eCSPI support for i.MX51 MCU Uwe Kleine-König
2010-09-02 15:11 ` Lothar Waßmann
2010-09-02 17:29 ` Baruch Siach
2010-09-02 17:57 ` Uwe Kleine-König
2010-09-03 8:49 ` Lothar Waßmann
2010-09-03 6:16 ` Jason Wang
2010-09-03 7:54 ` Uwe Kleine-König
2010-09-02 8:27 ` [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver Uwe Kleine-König
2010-09-02 10:07 ` Jason Wang
2010-09-02 14:39 ` Uwe Kleine-König
2010-09-02 14:41 ` [PATCH 1/6] ARM: mx51: clean up mx51 header Uwe Kleine-König
2010-09-02 14:41 ` [PATCH 2/6] ARM: mx51: fix naming of spi related defines Uwe Kleine-König
2010-09-02 14:42 ` [PATCH 3/6] ARM: imx: change the way spi-imx devices are registered Uwe Kleine-König
2010-09-02 14:42 ` [PATCH 4/6] ARM: mx51: Add spi clock and spi_imx device registration Uwe Kleine-König
[not found] ` <1283438523-19697-4-git-send-email-u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2010-09-03 5:46 ` Jason Wang
2010-09-02 14:42 ` [PATCH 5/6] spi-imx: Add i.MX51 support Uwe Kleine-König
2010-09-09 5:33 ` Grant Likely
2010-09-09 7:27 ` Uwe Kleine-König
2010-09-02 14:42 ` [PATCH 6/6] ARM: mx5/mx51_babbage: Add spi support Uwe Kleine-König
2010-09-03 3:18 ` [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver Jason Wang
2010-09-03 6:41 ` Amit Kucheria
2010-09-03 9:34 ` Robert Schwebel
2010-09-17 9:52 ` Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 01/16] spi/imx: default to m on platforms that have such devices Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 03/16] spi/imx: get rid of more ifs depending on the used cpu Uwe Kleine-König
[not found] ` <20100917095247.GB30441-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2010-09-17 9:54 ` [PATCH 02/16] spi/imx: convert driver to use platform ids Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 04/16] spi/imx: save the spi chip select in config struct, not the gpio to use Uwe Kleine-König
[not found] ` <1284717274-12850-4-git-send-email-u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2010-09-17 11:11 ` Lothar Waßmann
2010-09-17 11:20 ` Russell King - ARM Linux
2010-09-19 8:47 ` Jason Wang
2010-09-17 9:54 ` [PATCH 05/16] spi/imx: add support for imx51's eCSPI and CSPI Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 06/16] ARM: imx: change the way spi-imx devices are registered Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 07/16] ARM: imx: use platform ids for spi_imx devices Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 08/16] ARM: mx51: clean up mx51 header Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 09/16] ARM: mx51: fix naming of spi related defines Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 10/16] ARM: mx5: add spi_imx device registration Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 11/16] ARM: mx5/clock-mx51: refactor ccgr callbacks to use common code Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 13/16] ARM: mx5/clock-mx51: add spi clocks Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 14/16] ARM: mx5/iomux-mx51: add iomux definitions for eCSPI2 on the imx51_3ds board Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 15/16] ARM: mx5/mx51_3ds: add eCSPI2 support " Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 16/16] ARM: mx5/mx51_3ds: add SPI NOR flash in the board init stage Uwe Kleine-König
2010-09-17 9:54 ` [PATCH 12/16] ARM: mx5/clock-mx51: new macro that defines a clk with all members Uwe Kleine-König
2010-09-19 8:53 ` [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver Jason Wang
2010-09-20 15:33 ` Uwe Kleine-König
2010-09-21 1:39 ` Jason Wang
2010-09-24 7:00 ` Grant Likely
2010-09-24 9:11 ` Uwe Kleine-König
2010-09-24 16:12 ` Grant Likely
2010-09-24 18:18 ` Uwe Kleine-König
[not found] ` <20100902143908.GK14214-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2010-10-08 9:24 ` [PATCH 7/6] spi/imx: Support different fifo sizes Uwe Kleine-König
[not found] ` <1286529841-20800-1-git-send-email-u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2010-10-08 16:39 ` Grant Likely [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101008163902.GB3863@angua.secretlab.ca \
--to=grant.likely-s3s/wqlpoipyb63q8fvjnq@public.gmane.org \
--cc=amit.kucheria-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org \
--cc=david-/Q/L1SwJa3aEVqv0pETR8A@public.gmane.org \
--cc=jason77.wang-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
--cc=u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).