From: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
To: Michael Williamson
<michael.williamson-wZX4cNJlHJ2sVWG7oymsAA@public.gmane.org>
Cc: spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org,
davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org,
dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: Re: [PATCH] spi: davinci: Use correct length parameter to dma_map_single calls
Date: Mon, 14 Mar 2011 13:18:38 -0600 [thread overview]
Message-ID: <20110314191838.GD16096@angua.secretlab.ca> (raw)
In-Reply-To: <1300026862-1179-1-git-send-email-michael.williamson-wZX4cNJlHJ2sVWG7oymsAA@public.gmane.org>
On Sun, Mar 13, 2011 at 10:34:21AM -0400, Michael Williamson wrote:
> The davinci spi driver provides an option to use DMA transfers for
> data. In the dma_map_single() call, the driver is passing the
> number of words to be transfered for the mapping size. It should
> be the number of bytes.
>
> Signed-off-by: Michael Williamson <michael.williamson-wZX4cNJlHJ2sVWG7oymsAA@public.gmane.org>
Applied, thanks
g.
> ---
> Note: I only have 8 bit devices to test with, so I can only confirm this
> patch does not break such a configuration.
>
> drivers/spi/davinci_spi.c | 10 +++++-----
> 1 files changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c
> index 166a879..037ba82 100644
> --- a/drivers/spi/davinci_spi.c
> +++ b/drivers/spi/davinci_spi.c
> @@ -591,10 +591,10 @@ static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
>
> if (t->tx_buf) {
> t->tx_dma = dma_map_single(&spi->dev, (void *)t->tx_buf,
> - dspi->wcount, DMA_TO_DEVICE);
> + t->len, DMA_TO_DEVICE);
> if (dma_mapping_error(&spi->dev, t->tx_dma)) {
> dev_dbg(sdev, "Unable to DMA map %d bytes"
> - "TX buffer\n", dspi->wcount);
> + "TX buffer\n", t->len);
> return -ENOMEM;
> }
> }
> @@ -624,7 +624,7 @@ static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
>
> if (t->rx_buf) {
> rx_buf = t->rx_buf;
> - rx_buf_count = dspi->rcount;
> + rx_buf_count = t->len;
> } else {
> rx_buf = dspi->rx_tmp_buf;
> rx_buf_count = sizeof(dspi->rx_tmp_buf);
> @@ -636,7 +636,7 @@ static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
> dev_dbg(sdev, "Couldn't DMA map a %d bytes RX buffer\n",
> rx_buf_count);
> if (t->tx_buf)
> - dma_unmap_single(NULL, t->tx_dma, dspi->wcount,
> + dma_unmap_single(NULL, t->tx_dma, t->len,
> DMA_TO_DEVICE);
> return -ENOMEM;
> }
> @@ -675,7 +675,7 @@ static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
> if (spicfg->io_type == SPI_IO_TYPE_DMA) {
>
> if (t->tx_buf)
> - dma_unmap_single(NULL, t->tx_dma, dspi->wcount,
> + dma_unmap_single(NULL, t->tx_dma, t->len,
> DMA_TO_DEVICE);
>
> dma_unmap_single(NULL, t->rx_dma, rx_buf_count,
> --
> 1.7.0.4
>
prev parent reply other threads:[~2011-03-14 19:18 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-13 14:34 [PATCH] spi: davinci: Use correct length parameter to dma_map_single calls Michael Williamson
[not found] ` <1300026862-1179-1-git-send-email-michael.williamson-wZX4cNJlHJ2sVWG7oymsAA@public.gmane.org>
2011-03-13 14:34 ` [PATCH] spi: davinci: Support DMA transfers larger than 65535 words Michael Williamson
[not found] ` <1300026862-1179-2-git-send-email-michael.williamson-wZX4cNJlHJ2sVWG7oymsAA@public.gmane.org>
2011-03-14 9:33 ` Stefano Babic
2011-03-14 10:25 ` Sergei Shtylyov
[not found] ` <4D7DED07.7020000-Igf4POYTYCDQT0dZR+AlfA@public.gmane.org>
2011-03-14 11:06 ` Michael Williamson
2011-03-14 19:18 ` Grant Likely [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110314191838.GD16096@angua.secretlab.ca \
--to=grant.likely-s3s/wqlpoipyb63q8fvjnq@public.gmane.org \
--cc=davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org \
--cc=dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
--cc=michael.williamson-wZX4cNJlHJ2sVWG7oymsAA@public.gmane.org \
--cc=spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).