linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Grant Likely <grant.likely@secretlab.ca>
To: "Shimoda, Yoshihiro" <yoshihiro.shimoda.uh@renesas.com>
Cc: spi-devel-general@lists.sourceforge.net,
	SH-Linux <linux-sh@vger.kernel.org>
Subject: Re: [PATCH RESEND] spi: spi-sh: add IORESOURCE_MEM_TYPE_MASK decoding for access size
Date: Wed, 7 Mar 2012 19:26:36 -0700	[thread overview]
Message-ID: <20120308022636.GB1964@ponder.secretlab.ca> (raw)
In-Reply-To: <4F56F601.2070405@renesas.com>

On Wed, Mar 07, 2012 at 02:45:37PM +0900, Shimoda, Yoshihiro wrote:
> This SPI controller's access size is 32, or 8-bit. The previous driver
> supported 32-bit only. So, this patch adds IORESOURCE_MEM_TYPE_MASK
> decoding, an then, the driver can handle the SPI controller of 8-bit.
> 
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

Applied, thanks.

g.

> ---
>  drivers/spi/spi-sh.c |   25 +++++++++++++++++++++++--
>  1 files changed, 23 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/spi/spi-sh.c b/drivers/spi/spi-sh.c
> index 70c8af9..79442c3 100644
> --- a/drivers/spi/spi-sh.c
> +++ b/drivers/spi/spi-sh.c
> @@ -92,17 +92,26 @@ struct spi_sh_data {
>  	unsigned long cr1;
>  	wait_queue_head_t wait;
>  	spinlock_t lock;
> +	int width;
>  };
> 
>  static void spi_sh_write(struct spi_sh_data *ss, unsigned long data,
>  			     unsigned long offset)
>  {
> -	writel(data, ss->addr + offset);
> +	if (ss->width == 8)
> +		iowrite8(data, ss->addr + (offset >> 2));
> +	else if (ss->width == 32)
> +		iowrite32(data, ss->addr + offset);
>  }
> 
>  static unsigned long spi_sh_read(struct spi_sh_data *ss, unsigned long offset)
>  {
> -	return readl(ss->addr + offset);
> +	if (ss->width == 8)
> +		return ioread8(ss->addr + (offset >> 2));
> +	else if (ss->width == 32)
> +		return ioread32(ss->addr + offset);
> +	else
> +		return 0;
>  }
> 
>  static void spi_sh_set_bit(struct spi_sh_data *ss, unsigned long val,
> @@ -464,6 +473,18 @@ static int __devinit spi_sh_probe(struct platform_device *pdev)
>  	ss = spi_master_get_devdata(master);
>  	dev_set_drvdata(&pdev->dev, ss);
> 
> +	switch (res->flags & IORESOURCE_MEM_TYPE_MASK) {
> +	case IORESOURCE_MEM_8BIT:
> +		ss->width = 8;
> +		break;
> +	case IORESOURCE_MEM_32BIT:
> +		ss->width = 32;
> +		break;
> +	default:
> +		dev_err(&pdev->dev, "No support width\n");
> +		ret = -ENODEV;
> +		goto error1;
> +	}
>  	ss->irq = irq;
>  	ss->master = master;
>  	ss->addr = ioremap(res->start, resource_size(res));
> -- 
> 1.7.1

      reply	other threads:[~2012-03-08  2:26 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-03-07  5:45 [PATCH RESEND] spi: spi-sh: add IORESOURCE_MEM_TYPE_MASK decoding for access size Shimoda, Yoshihiro
2012-03-08  2:26 ` Grant Likely [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120308022636.GB1964@ponder.secretlab.ca \
    --to=grant.likely@secretlab.ca \
    --cc=linux-sh@vger.kernel.org \
    --cc=spi-devel-general@lists.sourceforge.net \
    --cc=yoshihiro.shimoda.uh@renesas.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).