[PATCH 0/4] spi: bcm63xx fixes

[PATCH 0/4] spi: bcm63xx fixes

[Florian Fainelli]

Hi Grant,

This patch series aims at fixing the spi-bcm63xx driver which is currently
sleeping in its transfer() function. This series is aimed at 3.4-rcX.

Thanks!

Florian Fainelli (4):
  spi: bcm63xx: convert to the pump message infrastructure
  spi: bcm63xx: don't use the stopping state
  spi: bcm63xx: set master driver mode_bits.
  spi: bcm63xx: bump driver version to 0.1.3.

 drivers/spi/spi-bcm63xx.c |  165 +++++++++++++++++++++++++--------------------
 1 files changed, 93 insertions(+), 72 deletions(-)

-- 
1.7.5.4


------------------------------------------------------------------------------
For Developers, A Lot Can Happen In A Second.
Boundary is the first to Know...and Tell You.
Monitor Your Applications in Ultra-Fine Resolution. Try it FREE!
http://p.sf.net/sfu/Boundary-d2dvs2

[PATCH 1/4] spi: bcm63xx: convert to the pump message infrastructure

[Florian Fainelli]

This patch converts the bcm63xx SPI driver to use the SPI infrastructure
pump message queue. Since we were previously sleeping in the SPI
driver's transfer() function (which is not allowed) this is now fixed as well.

To complete that conversion a certain number of changes have been made:
- the transfer len is split into multiple hardware transfers in case its
  size is bigger than the hardware FIFO size
- the FIFO refill is no longer done in the interrupt context, which was a
  bad idea leading to quick interrupt handler re-entrancy

Tested-by: Tanguy Bouzeloc <tanguy.bouzeloc-HH44TBFINEIAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Florian Fainelli <florian-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
---
 drivers/spi/spi-bcm63xx.c |  149 +++++++++++++++++++++++++++------------------
 1 files changed, 89 insertions(+), 60 deletions(-)

diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c
index f01b264..63b0028 100644
--- a/drivers/spi/spi-bcm63xx.c
+++ b/drivers/spi/spi-bcm63xx.c
@@ -1,7 +1,7 @@
 /*
  * Broadcom BCM63xx SPI controller support
  *
- * Copyright (C) 2009-2011 Florian Fainelli <florian-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
+ * Copyright (C) 2009-2012 Florian Fainelli <florian-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
  * Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc-HH44TBFINEIAvxtiuMwx3w@public.gmane.org>
  *
  * This program is free software; you can redistribute it and/or
@@ -30,6 +30,8 @@
 #include <linux/spi/spi.h>
 #include <linux/completion.h>
 #include <linux/err.h>
+#include <linux/workqueue.h>
+#include <linux/pm_runtime.h>
 
 #include <bcm63xx_dev_spi.h>
 
@@ -96,17 +98,12 @@ static const unsigned bcm63xx_spi_freq_table[SPI_CLK_MASK][2] = {
 	{   391000, SPI_CLK_0_391MHZ }
 };
 
-static int bcm63xx_spi_setup_transfer(struct spi_device *spi,
-				      struct spi_transfer *t)
+static int bcm63xx_spi_check_transfer(struct spi_device *spi,
+					struct spi_transfer *t)
 {
-	struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
 	u8 bits_per_word;
-	u8 clk_cfg, reg;
-	u32 hz;
-	int i;
 
 	bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word;
-	hz = (t) ? t->speed_hz : spi->max_speed_hz;
 	if (bits_per_word != 8) {
 		dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
 			__func__, bits_per_word);
@@ -119,6 +116,19 @@ static int bcm63xx_spi_setup_transfer(struct spi_device *spi,
 		return -EINVAL;
 	}
 
+	return 0;
+}
+
+static void bcm63xx_spi_setup_transfer(struct spi_device *spi,
+				      struct spi_transfer *t)
+{
+	struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
+	u32 hz;
+	u8 clk_cfg, reg;
+	int i;
+
+	hz = (t) ? t->speed_hz : spi->max_speed_hz;
+
 	/* Find the closest clock configuration */
 	for (i = 0; i < SPI_CLK_MASK; i++) {
 		if (hz <= bcm63xx_spi_freq_table[i][0]) {
@@ -139,8 +149,6 @@ static int bcm63xx_spi_setup_transfer(struct spi_device *spi,
 	bcm_spi_writeb(bs, reg, SPI_CLK_CFG);
 	dev_dbg(&spi->dev, "Setting clock register to %02x (hz %d)\n",
 		clk_cfg, hz);
-
-	return 0;
 }
 
 /* the spi->mode bits understood by this driver: */
@@ -165,7 +173,7 @@ static int bcm63xx_spi_setup(struct spi_device *spi)
 		return -EINVAL;
 	}
 
-	ret = bcm63xx_spi_setup_transfer(spi, NULL);
+	ret = bcm63xx_spi_check_transfer(spi, NULL);
 	if (ret < 0) {
 		dev_err(&spi->dev, "setup: unsupported mode bits %x\n",
 			spi->mode & ~MODEBITS);
@@ -190,28 +198,29 @@ static void bcm63xx_spi_fill_tx_fifo(struct bcm63xx_spi *bs)
 	bs->remaining_bytes -= size;
 }
 
-static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
+static unsigned int bcm63xx_txrx_bufs(struct spi_device *spi,
+					struct spi_transfer *t)
 {
 	struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
 	u16 msg_ctl;
 	u16 cmd;
 
+	/* Disable the CMD_DONE interrupt */
+	bcm_spi_writeb(bs, 0, SPI_INT_MASK);
+
 	dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
 		t->tx_buf, t->rx_buf, t->len);
 
 	/* Transmitter is inhibited */
 	bs->tx_ptr = t->tx_buf;
 	bs->rx_ptr = t->rx_buf;
-	init_completion(&bs->done);
 
 	if (t->tx_buf) {
 		bs->remaining_bytes = t->len;
 		bcm63xx_spi_fill_tx_fifo(bs);
 	}
 
-	/* Enable the command done interrupt which
-	 * we use to determine completion of a command */
-	bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
+	init_completion(&bs->done);
 
 	/* Fill in the Message control register */
 	msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT);
@@ -230,33 +239,76 @@ static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
 	cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
 	cmd |= (spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT);
 	bcm_spi_writew(bs, cmd, SPI_CMD);
-	wait_for_completion(&bs->done);
 
-	/* Disable the CMD_DONE interrupt */
-	bcm_spi_writeb(bs, 0, SPI_INT_MASK);
+	/* Enable the CMD_DONE interrupt */
+	bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
 
 	return t->len - bs->remaining_bytes;
 }
 
-static int bcm63xx_transfer(struct spi_device *spi, struct spi_message *m)
+static int bcm63xx_spi_prepare_transfer(struct spi_master *master)
 {
-	struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
-	struct spi_transfer *t;
-	int ret = 0;
+	struct bcm63xx_spi *bs = spi_master_get_devdata(master);
 
-	if (unlikely(list_empty(&m->transfers)))
-		return -EINVAL;
+	pm_runtime_get_sync(&bs->pdev->dev);
 
-	if (bs->stopping)
-		return -ESHUTDOWN;
+	return 0;
+}
+
+static int bcm63xx_spi_unprepare_transfer(struct spi_master *master)
+{
+	struct bcm63xx_spi *bs = spi_master_get_devdata(master);
+
+	pm_runtime_put(&bs->pdev->dev);
+
+	return 0;
+}
+
+static int bcm63xx_spi_transfer_one(struct spi_master *master,
+					struct spi_message *m)
+{
+	struct bcm63xx_spi *bs = spi_master_get_devdata(master);
+	struct spi_transfer *t;
+	struct spi_device *spi = m->spi;
+	int status = 0;
+	unsigned int timeout = 0;
 
 	list_for_each_entry(t, &m->transfers, transfer_list) {
-		ret += bcm63xx_txrx_bufs(spi, t);
-	}
+		unsigned int len = t->len;
+		u8 rx_tail;
 
-	m->complete(m->context);
+		status = bcm63xx_spi_check_transfer(spi, t);
+		if (status < 0)
+			goto exit;
 
-	return ret;
+		/* configure adapter for a new transfer */
+		bcm63xx_spi_setup_transfer(spi, t);
+
+		while (len) {
+			/* send the data */
+			len -= bcm63xx_txrx_bufs(spi, t);
+
+			timeout = wait_for_completion_timeout(&bs->done, HZ);
+			if (!timeout) {
+				status = -ETIMEDOUT;
+				goto exit;
+			}
+
+			/* read out all data */
+			rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL);
+
+			/* Read out all the data */
+			if (rx_tail)
+				memcpy_fromio(bs->rx_ptr, bs->rx_io, rx_tail);
+		}
+
+		m->actual_length += t->len;
+	}
+exit:
+	m->status = status;
+	spi_finalize_current_message(master);
+
+	return 0;
 }
 
 /* This driver supports single master mode only. Hence
@@ -267,39 +319,15 @@ static irqreturn_t bcm63xx_spi_interrupt(int irq, void *dev_id)
 	struct spi_master *master = (struct spi_master *)dev_id;
 	struct bcm63xx_spi *bs = spi_master_get_devdata(master);
 	u8 intr;
-	u16 cmd;
 
 	/* Read interupts and clear them immediately */
 	intr = bcm_spi_readb(bs, SPI_INT_STATUS);
 	bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS);
 	bcm_spi_writeb(bs, 0, SPI_INT_MASK);
 
-	/* A tansfer completed */
-	if (intr & SPI_INTR_CMD_DONE) {
-		u8 rx_tail;
-
-		rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL);
-
-		/* Read out all the data */
-		if (rx_tail)
-			memcpy_fromio(bs->rx_ptr, bs->rx_io, rx_tail);
-
-		/* See if there is more data to send */
-		if (bs->remaining_bytes > 0) {
-			bcm63xx_spi_fill_tx_fifo(bs);
-
-			/* Start the transfer */
-			bcm_spi_writew(bs, SPI_HD_W << SPI_MSG_TYPE_SHIFT,
-				       SPI_MSG_CTL);
-			cmd = bcm_spi_readw(bs, SPI_CMD);
-			cmd |= SPI_CMD_START_IMMEDIATE;
-			cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
-			bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
-			bcm_spi_writew(bs, cmd, SPI_CMD);
-		} else {
-			complete(&bs->done);
-		}
-	}
+	/* A transfer completed */
+	if (intr & SPI_INTR_CMD_DONE)
+		complete(&bs->done);
 
 	return IRQ_HANDLED;
 }
@@ -345,7 +373,6 @@ static int __devinit bcm63xx_spi_probe(struct platform_device *pdev)
 	}
 
 	bs = spi_master_get_devdata(master);
-	init_completion(&bs->done);
 
 	platform_set_drvdata(pdev, master);
 	bs->pdev = pdev;
@@ -379,7 +406,9 @@ static int __devinit bcm63xx_spi_probe(struct platform_device *pdev)
 	master->bus_num = pdata->bus_num;
 	master->num_chipselect = pdata->num_chipselect;
 	master->setup = bcm63xx_spi_setup;
-	master->transfer = bcm63xx_transfer;
+	master->prepare_transfer_hardware = bcm63xx_spi_prepare_transfer;
+	master->unprepare_transfer_hardware = bcm63xx_spi_unprepare_transfer;
+	master->transfer_one_message = bcm63xx_spi_transfer_one;
 	bs->speed_hz = pdata->speed_hz;
 	bs->stopping = 0;
 	bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA));
-- 
1.7.5.4


------------------------------------------------------------------------------
For Developers, A Lot Can Happen In A Second.
Boundary is the first to Know...and Tell You.
Monitor Your Applications in Ultra-Fine Resolution. Try it FREE!
http://p.sf.net/sfu/Boundary-d2dvs2

Re: [PATCH 1/4] spi: bcm63xx: convert to the pump message infrastructure

[Grant Likely]

On Fri, 20 Apr 2012 15:37:33 +0200, Florian Fainelli <florian-p3rKhJxN3npAfugRpC6u6w@public.gmane.org> wrote:
> This patch converts the bcm63xx SPI driver to use the SPI infrastructure
> pump message queue. Since we were previously sleeping in the SPI
> driver's transfer() function (which is not allowed) this is now fixed as well.
> 
> To complete that conversion a certain number of changes have been made:
> - the transfer len is split into multiple hardware transfers in case its
>   size is bigger than the hardware FIFO size
> - the FIFO refill is no longer done in the interrupt context, which was a
>   bad idea leading to quick interrupt handler re-entrancy
> 
> Tested-by: Tanguy Bouzeloc <tanguy.bouzeloc-HH44TBFINEIAvxtiuMwx3w@public.gmane.org>
> Signed-off-by: Florian Fainelli <florian-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>

Applied, thanks.

g.

------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and 
threat landscape has changed and how IT managers can respond. Discussions 
will include endpoint security, mobile security and the latest in malware 
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/

[PATCH 2/4] spi: bcm63xx: don't use the stopping state

[Florian Fainelli]

We do not need to use a flag to indicate if the master driver is stopping
it is sufficient to perform spi master unregistering in the platform
driver's remove function.

Signed-off-by: Florian Fainelli <florian-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
---
 drivers/spi/spi-bcm63xx.c |   13 ++-----------
 1 files changed, 2 insertions(+), 11 deletions(-)

diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c
index 63b0028..80e5ed3 100644
--- a/drivers/spi/spi-bcm63xx.c
+++ b/drivers/spi/spi-bcm63xx.c
@@ -39,8 +39,6 @@
 #define DRV_VER		"0.1.2"
 
 struct bcm63xx_spi {
-	spinlock_t		lock;
-	int			stopping;
 	struct completion	done;
 
 	void __iomem		*regs;
@@ -161,9 +159,6 @@ static int bcm63xx_spi_setup(struct spi_device *spi)
 
 	bs = spi_master_get_devdata(spi->master);
 
-	if (bs->stopping)
-		return -ESHUTDOWN;
-
 	if (!spi->bits_per_word)
 		spi->bits_per_word = 8;
 
@@ -410,10 +405,8 @@ static int __devinit bcm63xx_spi_probe(struct platform_device *pdev)
 	master->unprepare_transfer_hardware = bcm63xx_spi_unprepare_transfer;
 	master->transfer_one_message = bcm63xx_spi_transfer_one;
 	bs->speed_hz = pdata->speed_hz;
-	bs->stopping = 0;
 	bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA));
 	bs->rx_io = (const u8 *)(bs->regs + bcm63xx_spireg(SPI_RX_DATA));
-	spin_lock_init(&bs->lock);
 
 	/* Initialize hardware */
 	clk_enable(bs->clk);
@@ -447,18 +440,16 @@ static int __devexit bcm63xx_spi_remove(struct platform_device *pdev)
 	struct spi_master *master = platform_get_drvdata(pdev);
 	struct bcm63xx_spi *bs = spi_master_get_devdata(master);
 
+	spi_unregister_master(master);
+
 	/* reset spi block */
 	bcm_spi_writeb(bs, 0, SPI_INT_MASK);
-	spin_lock(&bs->lock);
-	bs->stopping = 1;
 
 	/* HW shutdown */
 	clk_disable(bs->clk);
 	clk_put(bs->clk);
 
-	spin_unlock(&bs->lock);
 	platform_set_drvdata(pdev, 0);
-	spi_unregister_master(master);
 
 	return 0;
 }
-- 
1.7.5.4


------------------------------------------------------------------------------
For Developers, A Lot Can Happen In A Second.
Boundary is the first to Know...and Tell You.
Monitor Your Applications in Ultra-Fine Resolution. Try it FREE!
http://p.sf.net/sfu/Boundary-d2dvs2

Re: [PATCH 2/4] spi: bcm63xx: don't use the stopping state

[Grant Likely]

On Fri, 20 Apr 2012 15:37:34 +0200, Florian Fainelli <florian-p3rKhJxN3npAfugRpC6u6w@public.gmane.org> wrote:
> We do not need to use a flag to indicate if the master driver is stopping
> it is sufficient to perform spi master unregistering in the platform
> driver's remove function.
> 
> Signed-off-by: Florian Fainelli <florian-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>


Applied, thanks.

g.

> ---
>  drivers/spi/spi-bcm63xx.c |   13 ++-----------
>  1 files changed, 2 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c
> index 63b0028..80e5ed3 100644
> --- a/drivers/spi/spi-bcm63xx.c
> +++ b/drivers/spi/spi-bcm63xx.c
> @@ -39,8 +39,6 @@
>  #define DRV_VER		"0.1.2"
>  
>  struct bcm63xx_spi {
> -	spinlock_t		lock;
> -	int			stopping;
>  	struct completion	done;
>  
>  	void __iomem		*regs;
> @@ -161,9 +159,6 @@ static int bcm63xx_spi_setup(struct spi_device *spi)
>  
>  	bs = spi_master_get_devdata(spi->master);
>  
> -	if (bs->stopping)
> -		return -ESHUTDOWN;
> -
>  	if (!spi->bits_per_word)
>  		spi->bits_per_word = 8;
>  
> @@ -410,10 +405,8 @@ static int __devinit bcm63xx_spi_probe(struct platform_device *pdev)
>  	master->unprepare_transfer_hardware = bcm63xx_spi_unprepare_transfer;
>  	master->transfer_one_message = bcm63xx_spi_transfer_one;
>  	bs->speed_hz = pdata->speed_hz;
> -	bs->stopping = 0;
>  	bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA));
>  	bs->rx_io = (const u8 *)(bs->regs + bcm63xx_spireg(SPI_RX_DATA));
> -	spin_lock_init(&bs->lock);
>  
>  	/* Initialize hardware */
>  	clk_enable(bs->clk);
> @@ -447,18 +440,16 @@ static int __devexit bcm63xx_spi_remove(struct platform_device *pdev)
>  	struct spi_master *master = platform_get_drvdata(pdev);
>  	struct bcm63xx_spi *bs = spi_master_get_devdata(master);
>  
> +	spi_unregister_master(master);
> +
>  	/* reset spi block */
>  	bcm_spi_writeb(bs, 0, SPI_INT_MASK);
> -	spin_lock(&bs->lock);
> -	bs->stopping = 1;
>  
>  	/* HW shutdown */
>  	clk_disable(bs->clk);
>  	clk_put(bs->clk);
>  
> -	spin_unlock(&bs->lock);
>  	platform_set_drvdata(pdev, 0);
> -	spi_unregister_master(master);
>  
>  	return 0;
>  }
> -- 
> 1.7.5.4
> 

-- 
Grant Likely, B.Sc, P.Eng.
Secret Lab Technologies, Ltd.

------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and 
threat landscape has changed and how IT managers can respond. Discussions 
will include endpoint security, mobile security and the latest in malware 
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/

[PATCH 3/4] spi: bcm63xx: set master driver mode_bits.

[Florian Fainelli]

We were not properly advertising the MODE bits supported by this driver, fix
that.

Signed-off-by: Florian Fainelli <florian-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
---
 drivers/spi/spi-bcm63xx.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c
index 80e5ed3..7491971 100644
--- a/drivers/spi/spi-bcm63xx.c
+++ b/drivers/spi/spi-bcm63xx.c
@@ -404,6 +404,7 @@ static int __devinit bcm63xx_spi_probe(struct platform_device *pdev)
 	master->prepare_transfer_hardware = bcm63xx_spi_prepare_transfer;
 	master->unprepare_transfer_hardware = bcm63xx_spi_unprepare_transfer;
 	master->transfer_one_message = bcm63xx_spi_transfer_one;
+	master->mode_bits = MODEBITS;
 	bs->speed_hz = pdata->speed_hz;
 	bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA));
 	bs->rx_io = (const u8 *)(bs->regs + bcm63xx_spireg(SPI_RX_DATA));
-- 
1.7.5.4


------------------------------------------------------------------------------
For Developers, A Lot Can Happen In A Second.
Boundary is the first to Know...and Tell You.
Monitor Your Applications in Ultra-Fine Resolution. Try it FREE!
http://p.sf.net/sfu/Boundary-d2dvs2

Re: [PATCH 3/4] spi: bcm63xx: set master driver mode_bits.

[Grant Likely]

On Fri, 20 Apr 2012 15:37:35 +0200, Florian Fainelli <florian-p3rKhJxN3npAfugRpC6u6w@public.gmane.org> wrote:
> We were not properly advertising the MODE bits supported by this driver, fix
> that.
> 
> Signed-off-by: Florian Fainelli <florian-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>

Applied, thanks.

g.
> ---
>  drivers/spi/spi-bcm63xx.c |    1 +
>  1 files changed, 1 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c
> index 80e5ed3..7491971 100644
> --- a/drivers/spi/spi-bcm63xx.c
> +++ b/drivers/spi/spi-bcm63xx.c
> @@ -404,6 +404,7 @@ static int __devinit bcm63xx_spi_probe(struct platform_device *pdev)
>  	master->prepare_transfer_hardware = bcm63xx_spi_prepare_transfer;
>  	master->unprepare_transfer_hardware = bcm63xx_spi_unprepare_transfer;
>  	master->transfer_one_message = bcm63xx_spi_transfer_one;
> +	master->mode_bits = MODEBITS;
>  	bs->speed_hz = pdata->speed_hz;
>  	bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA));
>  	bs->rx_io = (const u8 *)(bs->regs + bcm63xx_spireg(SPI_RX_DATA));
> -- 
> 1.7.5.4
> 

-- 
Grant Likely, B.Sc, P.Eng.
Secret Lab Technologies, Ltd.

------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and 
threat landscape has changed and how IT managers can respond. Discussions 
will include endpoint security, mobile security and the latest in malware 
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/

[PATCH 4/4] spi: bcm63xx: bump driver version to 0.1.3.

[Florian Fainelli]

Signed-off-by: Florian Fainelli <florian-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
---
 drivers/spi/spi-bcm63xx.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c
index 7491971..f41964a 100644
--- a/drivers/spi/spi-bcm63xx.c
+++ b/drivers/spi/spi-bcm63xx.c
@@ -36,7 +36,7 @@
 #include <bcm63xx_dev_spi.h>
 
 #define PFX		KBUILD_MODNAME
-#define DRV_VER		"0.1.2"
+#define DRV_VER		"0.1.3"
 
 struct bcm63xx_spi {
 	struct completion	done;
-- 
1.7.5.4


------------------------------------------------------------------------------
For Developers, A Lot Can Happen In A Second.
Boundary is the first to Know...and Tell You.
Monitor Your Applications in Ultra-Fine Resolution. Try it FREE!
http://p.sf.net/sfu/Boundary-d2dvs2

Re: [PATCH 4/4] spi: bcm63xx: bump driver version to 0.1.3.

[Grant Likely]

On Fri, 20 Apr 2012 15:37:36 +0200, Florian Fainelli <florian-p3rKhJxN3npAfugRpC6u6w@public.gmane.org> wrote:
> Signed-off-by: Florian Fainelli <florian-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
> ---
>  drivers/spi/spi-bcm63xx.c |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c
> index 7491971..f41964a 100644
> --- a/drivers/spi/spi-bcm63xx.c
> +++ b/drivers/spi/spi-bcm63xx.c
> @@ -36,7 +36,7 @@
>  #include <bcm63xx_dev_spi.h>
>  
>  #define PFX		KBUILD_MODNAME
> -#define DRV_VER		"0.1.2"
> +#define DRV_VER		"0.1.3"

Remove this DRV_VER nonsense.  It doesn't belong in mainlined
drivers.

g.


------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and 
threat landscape has changed and how IT managers can respond. Discussions 
will include endpoint security, mobile security and the latest in malware 
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/

Re: [PATCH 0/4] spi: bcm63xx fixes

[Florian Fainelli]

Hi Grant,

On Friday 20 April 2012 15:37:32 Florian Fainelli wrote:
> Hi Grant,
> 
> This patch series aims at fixing the spi-bcm63xx driver which is currently
> sleeping in its transfer() function. This series is aimed at 3.4-rcX.

Any update on these patches? Thanks!

> 
> Thanks!
> 
> Florian Fainelli (4):
>   spi: bcm63xx: convert to the pump message infrastructure
>   spi: bcm63xx: don't use the stopping state
>   spi: bcm63xx: set master driver mode_bits.
>   spi: bcm63xx: bump driver version to 0.1.3.
> 
>  drivers/spi/spi-bcm63xx.c |  165
> +++++++++++++++++++++++++-------------------- 1 files changed, 93
> insertions(+), 72 deletions(-)
--
Florian

------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and 
threat landscape has changed and how IT managers can respond. Discussions 
will include endpoint security, mobile security and the latest in malware 
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/