From mboxrd@z Thu Jan 1 00:00:00 1970 From: Matt Porter Subject: Re: [PATCH v2 0/2] Add pinctrl support to omap2-mcspi Date: Mon, 17 Sep 2012 13:27:54 -0400 Message-ID: <20120917172754.GR27758@beef> References: <1347902538-21208-1-git-send-email-mporter@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Cc: AnilKumar , Linux Kernel Mailing List , Linux ARM Kernel List To: Linux OMAP List , Linux SPI Devel List , Grant Likely , Tony Lindgren Return-path: Content-Disposition: inline In-Reply-To: <1347902538-21208-1-git-send-email-mporter-l0cyMroinI0@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: spi-devel-general-bounces-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Id: linux-spi.vger.kernel.org On Mon, Sep 17, 2012 at 01:22:16PM -0400, Matt Porter wrote: > Changes since v1: > - warns that pins are not configured by the driver rather than > exiting > - dummy states are only enabled for OMAP platforms where DT is > not populated > > This series enables pinctrl support for McSPI. Platforms that boot only > from DT and rely on pinctrl to set pinmuxes appropriately require this > for omap2-mcspi operation. > > It has been tested on AM335x BeagleBone with an Adafruit SPI LCD attached > and regression tested on Beagleboard xM booting in the !DT case, using > board-omap3evm.c. > > The series applies on top of Tony's dt-devel branch. *sigh*, that's devel-dt of course. ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/