From: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
To: Gabor Juhos <juhosg-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
Cc: spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org,
Gabor Juhos <juhosg-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
Subject: Re: [PATCH 5/6] spi/ath79: avoid multiple initialization of the SPI controller
Date: Tue, 05 Feb 2013 13:00:33 +0000 [thread overview]
Message-ID: <20130205130033.3EE403E0E27@localhost> (raw)
In-Reply-To: <1356601349-23617-6-git-send-email-juhosg-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
On Thu, 27 Dec 2012 10:42:28 +0100, Gabor Juhos <juhosg-p3rKhJxN3npAfugRpC6u6w@public.gmane.org> wrote:
> Currently we are initializing the SPI controller in
> the chip select line function, and that function is
> called once for each SPI device on the bus. If a
> board has multiple SPI devices, the controller will
> be initialized multiple times.
>
> Introduce ath79_spi_{en,dis}able helper functions,
> and call those from probe/response in order to avoid
> the mutliple initialization of the controller.
>
> Signed-off-by: Gabor Juhos <juhosg-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
Applied, thanks.
g.
> ---
> drivers/spi/spi-ath79.c | 41 ++++++++++++++++++++++++-----------------
> 1 file changed, 24 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/spi/spi-ath79.c b/drivers/spi/spi-ath79.c
> index 19d539e..842acd8 100644
> --- a/drivers/spi/spi-ath79.c
> +++ b/drivers/spi/spi-ath79.c
> @@ -96,16 +96,8 @@ static void ath79_spi_chipselect(struct spi_device *spi, int is_active)
>
> }
>
> -static int ath79_spi_setup_cs(struct spi_device *spi)
> +static void ath79_spi_enable(struct ath79_spi *sp)
> {
> - struct ath79_spi *sp = ath79_spidev_to_sp(spi);
> - struct ath79_spi_controller_data *cdata;
> - int status;
> -
> - cdata = spi->controller_data;
> - if (spi->chip_select && !cdata)
> - return -EINVAL;
> -
> /* enable GPIO mode */
> ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO);
>
> @@ -115,6 +107,24 @@ static int ath79_spi_setup_cs(struct spi_device *spi)
>
> /* TODO: setup speed? */
> ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43);
> +}
> +
> +static void ath79_spi_disable(struct ath79_spi *sp)
> +{
> + /* restore CTRL register */
> + ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, sp->reg_ctrl);
> + /* disable GPIO mode */
> + ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
> +}
> +
> +static int ath79_spi_setup_cs(struct spi_device *spi)
> +{
> + struct ath79_spi_controller_data *cdata;
> + int status;
> +
> + cdata = spi->controller_data;
> + if (spi->chip_select && !cdata)
> + return -EINVAL;
>
> status = 0;
> if (spi->chip_select) {
> @@ -135,17 +145,10 @@ static int ath79_spi_setup_cs(struct spi_device *spi)
>
> static void ath79_spi_cleanup_cs(struct spi_device *spi)
> {
> - struct ath79_spi *sp = ath79_spidev_to_sp(spi);
> -
> if (spi->chip_select) {
> struct ath79_spi_controller_data *cdata = spi->controller_data;
> gpio_free(cdata->gpio);
> }
> -
> - /* restore CTRL register */
> - ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, sp->reg_ctrl);
> - /* disable GPIO mode */
> - ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
> }
>
> static int ath79_spi_setup(struct spi_device *spi)
> @@ -268,12 +271,15 @@ static int ath79_spi_probe(struct platform_device *pdev)
> dev_dbg(&pdev->dev, "register read/write delay is %u nsecs\n",
> sp->rrw_delay);
>
> + ath79_spi_enable(sp);
> ret = spi_bitbang_start(&sp->bitbang);
> if (ret)
> - goto err_clk_disable;
> + goto err_disable;
>
> return 0;
>
> +err_disable:
> + ath79_spi_disable(sp);
> err_clk_disable:
> clk_disable(sp->clk);
> err_clk_put:
> @@ -292,6 +298,7 @@ static int ath79_spi_remove(struct platform_device *pdev)
> struct ath79_spi *sp = platform_get_drvdata(pdev);
>
> spi_bitbang_stop(&sp->bitbang);
> + ath79_spi_disable(sp);
> clk_disable(sp->clk);
> clk_put(sp->clk);
> iounmap(sp->base);
> --
> 1.7.10
>
--
Grant Likely, B.Sc, P.Eng.
Secret Lab Technologies, Ltd.
------------------------------------------------------------------------------
Free Next-Gen Firewall Hardware Offer
Buy your Sophos next-gen firewall before the end March 2013
and get the hardware for free! Learn more.
http://p.sf.net/sfu/sophos-d2d-feb
next prev parent reply other threads:[~2013-02-05 13:00 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-27 9:42 [PATCH 0/6] spi/ath79: various fixes Gabor Juhos
[not found] ` <1356601349-23617-1-git-send-email-juhosg-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
2012-12-27 9:42 ` [PATCH 1/6] spi/ath79: add delay between SCK changes Gabor Juhos
[not found] ` <1356601349-23617-2-git-send-email-juhosg-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
2013-02-05 12:57 ` Grant Likely
2013-02-05 19:52 ` Gabor Juhos
2012-12-27 9:42 ` [PATCH 2/6] spi/ath79: add missing HIGH->LOW SCK transition Gabor Juhos
[not found] ` <1356601349-23617-3-git-send-email-juhosg-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
2013-02-05 12:57 ` Grant Likely
2012-12-27 9:42 ` [PATCH 3/6] spi/ath79: remove superfluous chip select code Gabor Juhos
[not found] ` <1356601349-23617-4-git-send-email-juhosg-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
2013-02-05 12:58 ` Grant Likely
2012-12-27 9:42 ` [PATCH 4/6] spi/ath79: use gpio_request_one Gabor Juhos
[not found] ` <1356601349-23617-5-git-send-email-juhosg-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
2013-02-05 12:59 ` Grant Likely
2012-12-27 9:42 ` [PATCH 5/6] spi/ath79: avoid multiple initialization of the SPI controller Gabor Juhos
[not found] ` <1356601349-23617-6-git-send-email-juhosg-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
2013-02-05 13:00 ` Grant Likely [this message]
2012-12-27 9:42 ` [PATCH 6/6] spi/ath79: add shutdown handler Gabor Juhos
[not found] ` <1356601349-23617-7-git-send-email-juhosg-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
2013-02-05 13:02 ` Grant Likely
2013-02-05 19:53 ` Gabor Juhos
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130205130033.3EE403E0E27@localhost \
--to=grant.likely-s3s/wqlpoipyb63q8fvjnq@public.gmane.org \
--cc=juhosg-p3rKhJxN3npAfugRpC6u6w@public.gmane.org \
--cc=spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).