Re: [PATCH v8 1/8] spi/spi-atmel: add physical base address

[Richard GENOUD <richard.genoud-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]

On [mer., 03.04.2013 13:57:42], Wenyou Yang wrote:
> From: Nicolas Ferre <nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
> 
> Needed for future use with dmaengine enabled driver.
> 
> Signed-off-by: Nicolas Ferre <nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
> Cc: spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> [wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org: submit the patch]
> Signed-off-by: Wenyou Yang <wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
> ---
>  drivers/spi/spi-atmel.c |    2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
> index 15e8459..38f8c0d 100644
> --- a/drivers/spi/spi-atmel.c
> +++ b/drivers/spi/spi-atmel.c
> @@ -196,6 +196,7 @@ struct atmel_spi_caps {
>  struct atmel_spi {
>  	spinlock_t		lock;
>  
> +	phys_addr_t		phybase;
>  	void __iomem		*regs;
>  	int			irq;
>  	struct clk		*clk;
> @@ -996,6 +997,7 @@ static int atmel_spi_probe(struct platform_device *pdev)
>  	as->regs = ioremap(regs->start, resource_size(regs));
>  	if (!as->regs)
>  		goto out_free_buffer;
> +	as->phybase = regs->start;
>  	as->irq = irq;
>  	as->clk = clk;
>  
> -- 
> 1.7.9.5
> 
Tested-by: Richard Genoud <richard.genoud-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

------------------------------------------------------------------------------
Minimize network downtime and maximize team effectiveness.
Reduce network management and security costs.Learn how to hire 
the most talented Cisco Certified professionals. Visit the 
Employer Resources Portal
http://www.cisco.com/web/learning/employer_resources/index.html