From: Richard GENOUD <richard.genoud-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Wenyou Yang <wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
Cc: JM.Lin-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org,
broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org,
nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org,
plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH v8 2/8] spi/spi-atmel: add flag to controller data for lock operations
Date: Wed, 3 Apr 2013 11:44:44 +0200 [thread overview]
Message-ID: <20130403094442.GB26067@lnx-rg> (raw)
In-Reply-To: <1364968716-23848-1-git-send-email-wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
On [mer., 03.04.2013 13:58:36], Wenyou Yang wrote:
> From: Nicolas Ferre <nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
>
> Will allow to drop the lock during DMA operations.
>
> Replacing non-irqsave versions with irqsave versions of the lock
> to make it correct in both pdc and dmaengine transfer mode
>
> Signed-off-by: Nicolas Ferre <nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
> Cc: spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> [wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org: submit the patch]
> Signed-off-by: Wenyou Yang <wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
> ---
> drivers/spi/spi-atmel.c | 35 +++++++++++++++++++++--------------
> 1 file changed, 21 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
> index 38f8c0d..2df562f 100644
> --- a/drivers/spi/spi-atmel.c
> +++ b/drivers/spi/spi-atmel.c
> @@ -195,6 +195,7 @@ struct atmel_spi_caps {
> */
> struct atmel_spi {
> spinlock_t lock;
> + unsigned long flags;
>
> phys_addr_t phybase;
> void __iomem *regs;
> @@ -333,6 +334,16 @@ static void cs_deactivate(struct atmel_spi *as, struct spi_device *spi)
> gpio_set_value(asd->npcs_pin, !active);
> }
>
> +static void atmel_spi_lock(struct atmel_spi *as)
> +{
> + spin_lock_irqsave(&as->lock, as->flags);
> +}
> +
> +static void atmel_spi_unlock(struct atmel_spi *as)
> +{
> + spin_unlock_irqrestore(&as->lock, as->flags);
> +}
> +
> static inline int atmel_spi_xfer_is_last(struct spi_message *msg,
> struct spi_transfer *xfer)
> {
> @@ -569,9 +580,9 @@ atmel_spi_msg_done(struct spi_master *master, struct atmel_spi *as,
> "xfer complete: %u bytes transferred\n",
> msg->actual_length);
>
> - spin_unlock(&as->lock);
> + atmel_spi_unlock(as);
> msg->complete(msg->context);
> - spin_lock(&as->lock);
> + atmel_spi_lock(as);
>
> as->current_transfer = NULL;
> as->next_transfer = NULL;
> @@ -594,7 +605,7 @@ atmel_spi_interrupt(int irq, void *dev_id)
> u32 status, pending, imr;
> int ret = IRQ_NONE;
>
> - spin_lock(&as->lock);
> + atmel_spi_lock(as);
>
> xfer = as->current_transfer;
> msg = list_entry(as->queue.next, struct spi_message, queue);
> @@ -697,7 +708,7 @@ atmel_spi_interrupt(int irq, void *dev_id)
> }
> }
>
> - spin_unlock(&as->lock);
> + atmel_spi_unlock(as);
>
> return ret;
> }
> @@ -802,13 +813,11 @@ static int atmel_spi_setup(struct spi_device *spi)
> spi->controller_state = asd;
> gpio_direction_output(npcs_pin, !(spi->mode & SPI_CS_HIGH));
> } else {
> - unsigned long flags;
> -
> - spin_lock_irqsave(&as->lock, flags);
> + atmel_spi_lock(as);
> if (as->stay == spi)
> as->stay = NULL;
> cs_deactivate(as, spi);
> - spin_unlock_irqrestore(&as->lock, flags);
> + atmel_spi_unlock(as);
> }
>
> asd->csr = csr;
> @@ -827,7 +836,6 @@ static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg)
> {
> struct atmel_spi *as;
> struct spi_transfer *xfer;
> - unsigned long flags;
> struct device *controller = spi->master->dev.parent;
> u8 bits;
> struct atmel_spi_device *asd;
> @@ -892,11 +900,11 @@ static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg)
> msg->status = -EINPROGRESS;
> msg->actual_length = 0;
>
> - spin_lock_irqsave(&as->lock, flags);
> + atmel_spi_lock(as);
> list_add_tail(&msg->queue, &as->queue);
> if (!as->current_transfer)
> atmel_spi_next_message(spi->master);
> - spin_unlock_irqrestore(&as->lock, flags);
> + atmel_spi_unlock(as);
>
> return 0;
> }
> @@ -906,17 +914,16 @@ static void atmel_spi_cleanup(struct spi_device *spi)
> struct atmel_spi *as = spi_master_get_devdata(spi->master);
> struct atmel_spi_device *asd = spi->controller_state;
> unsigned gpio = (unsigned) spi->controller_data;
> - unsigned long flags;
>
> if (!asd)
> return;
>
> - spin_lock_irqsave(&as->lock, flags);
> + atmel_spi_lock(as);
> if (as->stay == spi) {
> as->stay = NULL;
> cs_deactivate(as, spi);
> }
> - spin_unlock_irqrestore(&as->lock, flags);
> + atmel_spi_unlock(as);
>
> spi->controller_state = NULL;
> gpio_free(gpio);
> --
> 1.7.9.5
>
On sam9g35 with DMA and PIO (3.9-rc5 + device tree patches)
Tested-by: Richard Genoud <richard.genoud-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
------------------------------------------------------------------------------
Minimize network downtime and maximize team effectiveness.
Reduce network management and security costs.Learn how to hire
the most talented Cisco Certified professionals. Visit the
Employer Resources Portal
http://www.cisco.com/web/learning/employer_resources/index.html
next prev parent reply other threads:[~2013-04-03 9:44 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-03 5:56 [PATCH v8 0/8] spi/spi-atmel: add dmaengine support for atmel spi controller and to test the device tree support Wenyou Yang
2013-04-03 5:57 ` [PATCH v8 1/8] spi/spi-atmel: add physical base address Wenyou Yang
[not found] ` <1364968662-23763-1-git-send-email-wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2013-04-03 9:42 ` Richard GENOUD
2013-04-23 18:30 ` Mark Brown
[not found] ` <1364968581-23700-1-git-send-email-wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2013-04-03 5:58 ` [PATCH v8 2/8] spi/spi-atmel: add flag to controller data for lock operations Wenyou Yang
[not found] ` <1364968716-23848-1-git-send-email-wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2013-04-03 9:44 ` Richard GENOUD [this message]
2013-04-23 18:30 ` Mark Brown
2013-04-03 5:59 ` [PATCH v8 3/8] spi/spi-atmel: add dmaengine support Wenyou Yang
[not found] ` <1364968759-24036-1-git-send-email-wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2013-04-03 10:23 ` Richard GENOUD
2013-04-23 18:33 ` Mark Brown
[not found] ` <20130423183301.GX5019-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2013-04-24 9:27 ` Richard Genoud
2013-04-24 10:00 ` Mark Brown
2013-04-03 6:00 ` [PATCH v8 4/8] spi/spi-atmel: BUG: fix doesn' support 16 bits transfers using PIO Wenyou Yang
2013-04-24 10:01 ` Mark Brown
2013-04-03 6:02 ` [PATCH v8 6/8] ARM: dts: add spi nodes for atmel SoC Wenyou Yang
2013-04-24 10:03 ` Mark Brown
2013-04-03 6:03 ` [PATCH v8 7/8] ARM: dts: add spi nodes for the atmel boards Wenyou Yang
2013-04-24 10:04 ` Mark Brown
2013-04-03 6:01 ` [PATCH v8 5/8] ARM: at91: add clocks for spi dt entries Wenyou Yang
2013-04-24 10:02 ` Mark Brown
2013-04-03 6:03 ` [PATCH v8 8/8] ARM: dts: add pinctrl property for spi node for atmel SoC Wenyou Yang
[not found] ` <1364969032-24281-1-git-send-email-wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2013-04-03 10:35 ` Richard GENOUD
2013-04-24 10:05 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130403094442.GB26067@lnx-rg \
--to=richard.genoud-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=JM.Lin-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org \
--cc=broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org \
--cc=plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org \
--cc=spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
--cc=wenyou.yang-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).