[PATCH 0/9] Renesas RSPI/QSPI DT support

[PATCH 0/9] Renesas RSPI/QSPI DT support

[Geert Uytterhoeven]

This patches series adds DT support to the Renesas RSPI/QSPI driver, and
to the r7s72100/genmai and r8a7791/koelsch development boards:

    [1/9] spi: rspi: Add missing clk_disable() calls in error and cleanup paths
    [2/9] spi: rspi: Convert to clk_prepare_enable/disable_unprepare
    [3/9] spi: rspi: Use NULL as the clock ID
    [4/9][V3] spi: rspi: Add DT support
    [5/9] ARM: shmobile: r7s72100: Add RSPI clocks for DT
    [6/9][V3] ARM: shmobile: r7s72100 dtsi: Add RSPI nodes
    [7/9][V3] ARM: shmobile: genmai reference: Add RSPI nodes
    [8/9] ARM: shmobile: r8a7791 dtsi: Add QSPI node
    [9/9] ARM: shmobile: koelsch: Add QSPI nodes

[4/9], [6/9], and [7/9] have been sent before in the series "[PATCH v2 0/8]
SoC and board integration for RSPI on RZ/A1H".
[4/9] received some updates, cfr. its changelog.

Thanks!

Gr{oetje,eeting}s,

						Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
							    -- Linus Torvalds

[PATCH 1/9] spi: rspi: Add missing clk_disable() calls in error and cleanup paths

[Geert Uytterhoeven]

From: Geert Uytterhoeven <geert+renesas@linux-m68k.org>

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
---
 drivers/spi/spi-rspi.c |   15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c
index 04d512e1e894..5ce2127b2b43 100644
--- a/drivers/spi/spi-rspi.c
+++ b/drivers/spi/spi-rspi.c
@@ -1066,6 +1066,7 @@ static int rspi_remove(struct platform_device *pdev)
 	struct rspi_data *rspi = platform_get_drvdata(pdev);
 
 	rspi_release_dma(rspi);
+	clk_disable(rspi->clk);
 
 	return 0;
 }
@@ -1135,7 +1136,7 @@ static int rspi_probe(struct platform_device *pdev)
 	ret = ops->parse_platform_data(rspi, rspi_pd);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "rspi invalid platform data.\n");
-		goto error1;
+		goto error2;
 	}
 
 	for (i = 0; i < MAX_NUM_IRQ; i++) {
@@ -1145,13 +1146,13 @@ static int rspi_probe(struct platform_device *pdev)
 				break;
 			dev_err(&pdev->dev, "platform_get_irq error\n");
 			ret = -ENODEV;
-			goto error1;
+			goto error2;
 		}
 		ret = devm_request_irq(&pdev->dev, irq, rspi_irq, 0,
 				       dev_name(&pdev->dev), rspi);
 		if (ret < 0) {
 			dev_err(&pdev->dev, "request_irq %d error\n", irq);
-			goto error1;
+			goto error2;
 		}
 		rspi->irqs[i] = irq;
 		rspi->num_irqs++;
@@ -1160,21 +1161,23 @@ static int rspi_probe(struct platform_device *pdev)
 	ret = rspi_request_dma(rspi, pdev);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "rspi_request_dma failed.\n");
-		goto error2;
+		goto error3;
 	}
 
 	ret = devm_spi_register_master(&pdev->dev, master);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "spi_register_master error.\n");
-		goto error2;
+		goto error3;
 	}
 
 	dev_info(&pdev->dev, "probed\n");
 
 	return 0;
 
-error2:
+error3:
 	rspi_release_dma(rspi);
+error2:
+	clk_disable(rspi->clk);
 error1:
 	spi_master_put(master);
 
-- 
1.7.9.5

[PATCH 2/9] spi: rspi: Convert to clk_prepare_enable/disable_unprepare

[Geert Uytterhoeven]

From: Geert Uytterhoeven <geert+renesas@linux-m68k.org>

Get the driver ready for the migration to the common clock framework by
calling clk_prepare_enable() and clk_disable_unprepare().

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
---
 drivers/spi/spi-rspi.c |   11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c
index 5ce2127b2b43..b6439c9505ac 100644
--- a/drivers/spi/spi-rspi.c
+++ b/drivers/spi/spi-rspi.c
@@ -1066,7 +1066,7 @@ static int rspi_remove(struct platform_device *pdev)
 	struct rspi_data *rspi = platform_get_drvdata(pdev);
 
 	rspi_release_dma(rspi);
-	clk_disable(rspi->clk);
+	clk_disable_unprepare(rspi->clk);
 
 	return 0;
 }
@@ -1115,7 +1115,12 @@ static int rspi_probe(struct platform_device *pdev)
 		ret = PTR_ERR(rspi->clk);
 		goto error1;
 	}
-	clk_enable(rspi->clk);
+
+	ret = clk_prepare_enable(rspi->clk);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "unable to prepare/enable clock\n");
+		goto error1;
+	}
 
 	INIT_LIST_HEAD(&rspi->queue);
 	spin_lock_init(&rspi->lock);
@@ -1177,7 +1182,7 @@ static int rspi_probe(struct platform_device *pdev)
 error3:
 	rspi_release_dma(rspi);
 error2:
-	clk_disable(rspi->clk);
+	clk_disable_unprepare(rspi->clk);
 error1:
 	spi_master_put(master);
 
-- 
1.7.9.5

[PATCH 3/9] spi: rspi: Use NULL as the clock ID

[Geert Uytterhoeven]

From: Geert Uytterhoeven <geert+renesas-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org>

There's only one RSPI/QSPI clock, so we can use NULL as the clock ID

Signed-off-by: Geert Uytterhoeven <geert+renesas-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org>
---
 drivers/spi/spi-rspi.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c
index b6439c9505ac..6fd4770d22bd 100644
--- a/drivers/spi/spi-rspi.c
+++ b/drivers/spi/spi-rspi.c
@@ -1078,7 +1078,6 @@ static int rspi_probe(struct platform_device *pdev)
 	struct rspi_data *rspi;
 	int ret, irq;
 	unsigned int i;
-	char clk_name[16];
 	const struct rspi_plat_data *rspi_pd = dev_get_platdata(&pdev->dev);
 	const struct spi_ops *ops;
 	const struct platform_device_id *id_entry = pdev->id_entry;
@@ -1108,8 +1107,7 @@ static int rspi_probe(struct platform_device *pdev)
 		goto error1;
 	}
 
-	snprintf(clk_name, sizeof(clk_name), "%s%d", id_entry->name, pdev->id);
-	rspi->clk = devm_clk_get(&pdev->dev, clk_name);
+	rspi->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(rspi->clk)) {
 		dev_err(&pdev->dev, "cannot get clock\n");
 		ret = PTR_ERR(rspi->clk);
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH V3 4/9] spi: rspi: Add DT support

[Geert Uytterhoeven]

From: Geert Uytterhoeven <geert+renesas@linux-m68k.org>

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
---
V2:
  - Clarify RSPI/QSPI
  - Add interrupt-parent
  - s/should/must/ for #address-cells and #size-cells
V3:
  - Add renesas,rspi-sh
  - Drop -rcar suffix for QSPI
  - Clarify num-cs
  - Implement DT support in driver
  - Changed one-line summary from "Documentation: dt: Add Renesas RSPI/QSPI
    bindings" to "spi: rspi: Add DT support"
---
 Documentation/devicetree/bindings/spi/spi-rspi.txt |   33 +++++
 drivers/spi/spi-rspi.c                             |  131 +++++++++++++++++---
 2 files changed, 145 insertions(+), 19 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/spi/spi-rspi.txt

diff --git a/Documentation/devicetree/bindings/spi/spi-rspi.txt b/Documentation/devicetree/bindings/spi/spi-rspi.txt
new file mode 100644
index 000000000000..19854eeee579
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-rspi.txt
@@ -0,0 +1,33 @@
+Device tree configuration for Renesas RSPI/QSPI driver
+
+Required properties:
+- compatible       : For Renesas Serial Peripheral Interface on SH:
+                     "renesas,rspi-<soctype>", "renesas,rspi-sh" as fallback.
+		     For Renesas Serial Peripheral Interface on ARM:
+                     "renesas,rspi-<soctype>", "renesas,rspi-rz" as fallback.
+		     For Quad Serial Peripheral Interface:
+		     "renesas,qspi-<soctype>", "renesas,qspi" as fallback.
+- reg              : Address start and address range size of device
+- interrupts       : Up to 3 interrupts for RSPI (SPEI, SPRI, SPTI),
+		     1 interrupt for QSPI
+- interrupt-parent : The phandle for the interrupt controller that
+		     services interrupts for this device.
+- num-cs	   : Number of chip selects. Some RSPI cores have more than 1.
+- #address-cells   : Must be <1>
+- #size-cells      : Must be <0>
+
+Pinctrl properties might be needed, too. See there.
+
+Example:
+
+	spi0: spi@e800c800 {
+		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+		reg = <0xe800c800 0x24>;
+		interrupts = <0 238 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 239 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 240 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		num-cs = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c
index 6fd4770d22bd..dd3e9fd936ba 100644
--- a/drivers/spi/spi-rspi.c
+++ b/drivers/spi/spi-rspi.c
@@ -33,6 +33,7 @@
 #include <linux/clk.h>
 #include <linux/dmaengine.h>
 #include <linux/dma-mapping.h>
+#include <linux/of_device.h>
 #include <linux/sh_dma.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/rspi.h>
@@ -1071,6 +1072,101 @@ static int rspi_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct spi_ops rspi_ops = {
+	.parse_platform_data =		rspi_parse_platform_data,
+	.set_config_register =		rspi_set_config_register,
+	.send_pio =			rspi_send_pio,
+	.receive_pio =			rspi_receive_pio,
+	.mode_bits =			SPI_CPHA | SPI_CPOL | SPI_LOOP,
+};
+
+static const struct spi_ops qspi_ops = {
+	.parse_platform_data =		qspi_parse_platform_data,
+	.set_config_register =		qspi_set_config_register,
+	.send_pio =			qspi_send_pio,
+	.receive_pio =			qspi_receive_pio,
+	.mode_bits =			SPI_CPHA | SPI_CPOL,
+};
+
+#ifdef CONFIG_OF
+struct rspi_of_data {
+	const struct rspi_plat_data *template;
+	const struct spi_ops *spi_ops;
+};
+
+static const struct rspi_plat_data rspi_sh_template = {
+	.data_width	= 0,		/* legacy 16 bit */
+	.txmode		= true,		/* TX only mode */
+	.spcr2		= true,		/* Parity register */
+};
+
+static const struct rspi_plat_data rspi_arm_template = {
+	.data_width	= 8,		/* fixed 8-bit */
+	.txmode		= false,	/* No TX only mode */
+	.spcr2		= false,	/* No parity register */
+};
+
+static const struct rspi_of_data rspi_sh_of_data = {
+	.spi_ops	= &rspi_ops,
+	.template	= &rspi_sh_template,
+};
+
+static const struct rspi_of_data rspi_rz_of_data = {
+	.spi_ops	= &rspi_ops,
+	.template	= &rspi_arm_template,
+};
+
+static const struct rspi_of_data qspi_of_data = {
+	.spi_ops	= &qspi_ops,
+	.template	= &rspi_arm_template,
+};
+
+static const struct of_device_id rspi_of_match[] = {
+	/* RSPI on legacy SH */
+	{ .compatible = "renesas,rspi-sh7757", .data = &rspi_sh_of_data },
+	{ .compatible = "renesas,rspi-sh", .data = &rspi_sh_of_data },
+	/* RSPI on RZ */
+	{ .compatible = "renesas,rspi-r7s72100", .data = &rspi_rz_of_data },
+	{ .compatible = "renesas,rspi-rz", .data = &rspi_rz_of_data },
+	/* QSPI on R-Car Gen2 */
+	{ .compatible = "renesas,qspi-r8a7790", .data = &qspi_of_data },
+	{ .compatible = "renesas,qspi-r8a7791", .data = &qspi_of_data },
+	{ .compatible = "renesas,qspi", .data = &qspi_of_data },
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, rspi_of_match);
+
+static int rspi_parse_dt(struct device *dev, const struct rspi_of_data *od,
+			 const struct rspi_plat_data **pd_out,
+			 const struct spi_ops **ops_out)
+{
+	struct rspi_plat_data *pd;
+	u32 num_cs;
+	int error;
+
+	pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
+	if (!pd) {
+		dev_err(dev, "failed to allocate platform data\n");
+		return -ENOMEM;
+	}
+
+	/* Setup defaults from template */
+	memcpy(pd, od->template, sizeof(*pd));
+
+	/* Parse DT properties */
+	error = of_property_read_u32(dev->of_node, "num-cs", &num_cs);
+	if (error)
+		return error;
+	pd->num_chipselect = num_cs;
+
+	*pd_out = pd;
+	*ops_out = od->spi_ops;
+	return 0;
+}
+
+#endif /* CONFIG_OF */
+
 static int rspi_probe(struct platform_device *pdev)
 {
 	struct resource *res;
@@ -1078,11 +1174,22 @@ static int rspi_probe(struct platform_device *pdev)
 	struct rspi_data *rspi;
 	int ret, irq;
 	unsigned int i;
-	const struct rspi_plat_data *rspi_pd = dev_get_platdata(&pdev->dev);
+	const struct of_device_id *of_id;
+	const struct rspi_plat_data *rspi_pd;
 	const struct spi_ops *ops;
-	const struct platform_device_id *id_entry = pdev->id_entry;
 
-	ops = (struct spi_ops *)id_entry->driver_data;
+	of_id = of_match_device(rspi_of_match, &pdev->dev);
+	if (of_id) {
+		ret = rspi_parse_dt(&pdev->dev, of_id->data, &rspi_pd, &ops);
+		if (ret) {
+			dev_err(&pdev->dev, "rspi_parse_dt failed %d\n", ret);
+			return ret;
+		}
+	} else {
+		ops = (struct spi_ops *)pdev->id_entry->driver_data;
+		rspi_pd = dev_get_platdata(&pdev->dev);
+	};
+
 	/* ops parameter check */
 	if (!ops->set_config_register) {
 		dev_err(&pdev->dev, "there is no set_config_register\n");
@@ -1135,6 +1242,7 @@ static int rspi_probe(struct platform_device *pdev)
 	master->transfer = rspi_transfer;
 	master->cleanup = rspi_cleanup;
 	master->mode_bits = ops->mode_bits;
+	master->dev.of_node = pdev->dev.of_node;
 
 	ret = ops->parse_platform_data(rspi, rspi_pd);
 	if (ret < 0) {
@@ -1187,22 +1295,6 @@ error1:
 	return ret;
 }
 
-static struct spi_ops rspi_ops = {
-	.parse_platform_data =		rspi_parse_platform_data,
-	.set_config_register =		rspi_set_config_register,
-	.send_pio =			rspi_send_pio,
-	.receive_pio =			rspi_receive_pio,
-	.mode_bits =			SPI_CPHA | SPI_CPOL | SPI_LOOP,
-};
-
-static struct spi_ops qspi_ops = {
-	.parse_platform_data =		qspi_parse_platform_data,
-	.set_config_register =		qspi_set_config_register,
-	.send_pio =			qspi_send_pio,
-	.receive_pio =			qspi_receive_pio,
-	.mode_bits =			SPI_CPHA | SPI_CPOL,
-};
-
 static struct platform_device_id spi_driver_ids[] = {
 	{ "rspi",	(kernel_ulong_t)&rspi_ops },
 	{ "qspi",	(kernel_ulong_t)&qspi_ops },
@@ -1218,6 +1310,7 @@ static struct platform_driver rspi_driver = {
 	.driver		= {
 		.name = "renesas_spi",
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(rspi_of_match),
 	},
 };
 module_platform_driver(rspi_driver);
-- 
1.7.9.5

[PATCH 5/9] ARM: shmobile: r7s72100: Add RSPI clocks for DT

[Geert Uytterhoeven]

From: Geert Uytterhoeven <geert+renesas@linux-m68k.org>

Add DT-style ("%08x.spi") clocks, as Genmai doesn't use the common
clockframe yet.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
---
 arch/arm/mach-shmobile/clock-r7s72100.c |    5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/mach-shmobile/clock-r7s72100.c b/arch/arm/mach-shmobile/clock-r7s72100.c
index 6ae341ca713c..f5bf95cec6cf 100644
--- a/arch/arm/mach-shmobile/clock-r7s72100.c
+++ b/arch/arm/mach-shmobile/clock-r7s72100.c
@@ -194,6 +194,11 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("rspi.2", &mstp_clks[MSTP105]),
 	CLKDEV_DEV_ID("rspi.3", &mstp_clks[MSTP104]),
 	CLKDEV_DEV_ID("rspi.4", &mstp_clks[MSTP103]),
+	CLKDEV_DEV_ID("e800c800.spi", &mstp_clks[MSTP107]),
+	CLKDEV_DEV_ID("e800d000.spi", &mstp_clks[MSTP106]),
+	CLKDEV_DEV_ID("e800d800.spi", &mstp_clks[MSTP105]),
+	CLKDEV_DEV_ID("e800e000.spi", &mstp_clks[MSTP104]),
+	CLKDEV_DEV_ID("e800e800.spi", &mstp_clks[MSTP103]),
 	CLKDEV_DEV_ID("fcfee000.i2c", &mstp_clks[MSTP97]),
 	CLKDEV_DEV_ID("fcfee400.i2c", &mstp_clks[MSTP96]),
 	CLKDEV_DEV_ID("fcfee800.i2c", &mstp_clks[MSTP95]),
-- 
1.7.9.5

[PATCH V3 6/9] ARM: shmobile: r7s72100 dtsi: Add RSPI nodes

[Geert Uytterhoeven]

From: Geert Uytterhoeven <geert+renesas@linux-m68k.org>

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
---
V2:
  - No changes
V3:
  - No changes

 arch/arm/boot/dts/r7s72100.dtsi |   65 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 65 insertions(+)

diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index ff0bd6be454f..42e9b423476c 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -34,6 +34,11 @@
 		gpio10 = &port10;
 		gpio11 = &port11;
 		gpio12 = &jtagport0;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi3 = &spi3;
+		spi4 = &spi4;
 	};
 
 	cpus {
@@ -289,4 +294,64 @@
 		clock-frequency = <100000>;
 		status = "disabled";
 	};
+
+	spi0: spi@e800c800 {
+		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+		reg = <0xe800c800 0x24>;
+		interrupts = <0 238 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 239 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 240 IRQ_TYPE_LEVEL_HIGH>;
+		num-cs = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi1: spi@e800d000 {
+		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+		reg = <0xe800d000 0x24>;
+		interrupts = <0 241 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 242 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 243 IRQ_TYPE_LEVEL_HIGH>;
+		num-cs = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi2: spi@e800d800 {
+		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+		reg = <0xe800d800 0x24>;
+		interrupts = <0 244 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 245 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 246 IRQ_TYPE_LEVEL_HIGH>;
+		num-cs = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi3: spi@e800e000 {
+		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+		reg = <0xe800e000 0x24>;
+		interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 248 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 249 IRQ_TYPE_LEVEL_HIGH>;
+		num-cs = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi4: spi@e800e800 {
+		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+		reg = <0xe800e800 0x24>;
+		interrupts = <0 250 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 251 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 252 IRQ_TYPE_LEVEL_HIGH>;
+		num-cs = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
 };
-- 
1.7.9.5

[PATCH V3 7/9] ARM: shmobile: genmai reference: Add RSPI nodes

[Geert Uytterhoeven]

From: Geert Uytterhoeven <geert+renesas@linux-m68k.org>

Add pinctrl and SPI devices for RSPI on Genmai.

On this board, only rspi4 is in use. Its bus contains a single device
(a wm8978 audio codec), for which no bindings are defined yet.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
---
V2:
  - Use generic "codec" instead of specific "wm8978" node name.
V3:
  - No changes

 arch/arm/boot/dts/r7s72100-genmai-reference.dts |   18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r7s72100-genmai-reference.dts b/arch/arm/boot/dts/r7s72100-genmai-reference.dts
index 367af5c133e0..c2cc4bd5a470 100644
--- a/arch/arm/boot/dts/r7s72100-genmai-reference.dts
+++ b/arch/arm/boot/dts/r7s72100-genmai-reference.dts
@@ -43,7 +43,7 @@
 };
 
 &pfc {
-	pinctrl-0 = <&scif2_pins &ethernet_pins>;
+	pinctrl-0 = <&scif2_pins &ethernet_pins &rspi4_pins>;
 	pinctrl-names = "default";
 
 	scif2_pins: serial2 {
@@ -73,6 +73,12 @@
 				 "ethernet_int_p1_15";
 		renesas,function = "ethernet";
 	};
+
+	rspi4_pins: spi4 {
+		renesas,groups = "rspi4_rspck_p4_0", "rspi4_ssl0_p4_1",
+				 "rspi4_mosi_p4_2", "rspi4_miso_p4_3";
+		renesas,function = "rspi4";
+	};
 };
 
 &i2c2 {
@@ -85,3 +91,13 @@
 		pagesize = <64>;
 	};
 };
+
+&spi4 {
+	status = "okay";
+
+	codec: codec@0 {
+		compatible = "wlf,wm8978";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+	};
+};
-- 
1.7.9.5

[PATCH 8/9] ARM: shmobile: r8a7791 dtsi: Add QSPI node

[Geert Uytterhoeven]

From: Geert Uytterhoeven <geert+renesas@linux-m68k.org>

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
---
 arch/arm/boot/dts/r8a7791.dtsi |   12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 00ed0e0a9bcb..3233041d8a44 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -687,4 +687,16 @@
 			clock-output-names = "scifa3", "scifa4", "scifa5";
 		};
 	};
+
+	spi: spi@e6b10000 {
+		compatible = "renesas,qspi-r8a7791", "renesas,qspi";
+		reg = <0 0xe6b10000 0 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>;
+		num-cs = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
 };
-- 
1.7.9.5

[PATCH 9/9] ARM: shmobile: koelsch: Add QSPI nodes

[Geert Uytterhoeven]

From: Geert Uytterhoeven <geert+renesas-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org>

Add pinctrl and SPI devices for QSPI on Koelsch.
Add Spansion s25fl512s SPI FLASH and MTD partitions.

Signed-off-by: Geert Uytterhoeven <geert+renesas-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org>
---
 arch/arm/boot/dts/r8a7791-koelsch.dts |   36 +++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index d5e42b396ef7..885b61e09638 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -123,6 +123,11 @@
 		renesas,groups = "scif1_data_d";
 		renesas,function = "scif1";
 	};
+
+	qspi_pins: spi {
+		renesas,groups = "qspi_ctrl", "qspi_data4";
+		renesas,function = "qspi";
+	};
 };
 
 &scif0 {
@@ -138,3 +143,34 @@
 
 	status = "okay";
 };
+
+&spi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,s25fl512s";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		m25p,fast-read;
+
+		partition@0 {
+			label = "loader";
+			reg = <0x00000000 0x00080000>;
+			read-only;
+		};
+		partition@80000 {
+			label = "bootenv";
+			reg = <0x00080000 0x00080000>;
+			read-only;
+		};
+		partition@100000 {
+			label = "data";
+			reg = <0x00100000 0x03f00000>;
+		};
+	};
+};
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 0/9] Renesas RSPI/QSPI DT support

[Geert Uytterhoeven]

On Sun, Jan 12, 2014 at 12:13 PM, Geert Uytterhoeven
<geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org> wrote:
>     [5/9] ARM: shmobile: r7s72100: Add RSPI clocks for DT
>     [6/9][V3] ARM: shmobile: r7s72100 dtsi: Add RSPI nodes
>     [7/9][V3] ARM: shmobile: genmai reference: Add RSPI nodes
>     [8/9] ARM: shmobile: r8a7791 dtsi: Add QSPI node
>     [9/9] ARM: shmobile: koelsch: Add QSPI nodes

Forgot to mention:

The ARM/shmobile part is based on renesas-devel-v3.13-rc7-20140109v2, with
Magnus' pinctrl, Wolfram's riic, Simon's sh_eth, Valentine's i2c pinctrl
and Laurent's SCIF DT work applied on top.
[Simon: I don't know in which order you will merge these. If you want me
 to rebase my patches, just ask! Thanks!]

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/9] spi: rspi: Add missing clk_disable() calls in error and cleanup paths

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 491 bytes --]

On Sun, Jan 12, 2014 at 12:13:34PM +0100, Geert Uytterhoeven wrote:
> From: Geert Uytterhoeven <geert+renesas-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org>
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org>

This doesn't seem to apply to current code, please check and resend.
The fact that there's multiple patch serieses in flight from you for
this driver plus development work (again mostly from you) in git is
probably not helping here...

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [PATCH V3 4/9] spi: rspi: Add DT support

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 1824 bytes --]

On Sun, Jan 12, 2014 at 12:13:37PM +0100, Geert Uytterhoeven wrote:

> +Required properties:
> +- compatible       : For Renesas Serial Peripheral Interface on SH:
> +                     "renesas,rspi-<soctype>", "renesas,rspi-sh" as fallback.
> +		     For Renesas Serial Peripheral Interface on ARM:
> +                     "renesas,rspi-<soctype>", "renesas,rspi-rz" as fallback.
> +		     For Quad Serial Peripheral Interface:
> +		     "renesas,qspi-<soctype>", "renesas,qspi" as fallback.

This should specify what <soctype> is and ideally list the valid values
or at least the convention for writing them; perhaps a list of SoCs in
some common place would be useful for sharing between all the IPs.

> +- interrupts       : Up to 3 interrupts for RSPI (SPEI, SPRI, SPTI),
> +		     1 interrupt for QSPI

For multiple interrupts you need to say how they are identified - if
they're not named the order must be specified.

> +Pinctrl properties might be needed, too. See there.

Where?

> +static const struct of_device_id rspi_of_match[] = {
> +	/* RSPI on legacy SH */
> +	{ .compatible = "renesas,rspi-sh7757", .data = &rspi_sh_of_data },
> +	{ .compatible = "renesas,rspi-sh", .data = &rspi_sh_of_data },
> +	/* RSPI on RZ */
> +	{ .compatible = "renesas,rspi-r7s72100", .data = &rspi_rz_of_data },
> +	{ .compatible = "renesas,rspi-rz", .data = &rspi_rz_of_data },
> +	/* QSPI on R-Car Gen2 */
> +	{ .compatible = "renesas,qspi-r8a7790", .data = &qspi_of_data },
> +	{ .compatible = "renesas,qspi-r8a7791", .data = &qspi_of_data },
> +	{ .compatible = "renesas,qspi", .data = &qspi_of_data },
> +	{ /* sentinel */ }
> +};

No need to actually list the specific SoCs given that the fallback is
mandatory and the resulting data is identical, if you are going to do
that then I'd have the compatible set num_cs too.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [PATCH 1/9] spi: rspi: Add missing clk_disable() calls in error and cleanup paths

[Geert Uytterhoeven]

Hi Mark,

On Mon, Jan 13, 2014 at 12:59 PM, Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> wrote:
> On Sun, Jan 12, 2014 at 12:13:34PM +0100, Geert Uytterhoeven wrote:
>> From: Geert Uytterhoeven <geert+renesas-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org>
>>
>> Signed-off-by: Geert Uytterhoeven <geert+renesas-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org>
>
> This doesn't seem to apply to current code, please check and resend.
> The fact that there's multiple patch serieses in flight from you for
> this driver plus development work (again mostly from you) in git is
> probably not helping here...

This depends on the series:

[PATCH V2 0/8] spi: rspi: Add support for RZ/A1H

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/9] spi: rspi: Add missing clk_disable() calls in error and cleanup paths

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 710 bytes --]

On Mon, Jan 13, 2014 at 01:17:18PM +0100, Geert Uytterhoeven wrote:
> On Mon, Jan 13, 2014 at 12:59 PM, Mark Brown <broonie@kernel.org> wrote:

> > This doesn't seem to apply to current code, please check and resend.
> > The fact that there's multiple patch serieses in flight from you for
> > this driver plus development work (again mostly from you) in git is
> > probably not helping here...

> This depends on the series:

> [PATCH V2 0/8] spi: rspi: Add support for RZ/A1H

Please say if you're doing things like that, or ideally just send one
patch series since everything needs to be applied as one series - in
this case since the patch is a bug fix it ought to be going in before
anything else anyway.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [PATCH 0/9] Renesas RSPI/QSPI DT support

[Simon Horman]

On Sun, Jan 12, 2014 at 01:55:19PM +0100, Geert Uytterhoeven wrote:
> On Sun, Jan 12, 2014 at 12:13 PM, Geert Uytterhoeven
> <geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org> wrote:

        [1/9] spi: rspi: Add missing clk_disable() calls in error and cleanup paths
        [2/9] spi: rspi: Convert to clk_prepare_enable/disable_unprepare           
        [3/9] spi: rspi: Use NULL as the clock ID
        [4/9][V3] spi: rspi: Add DT support

> >     [5/9] ARM: shmobile: r7s72100: Add RSPI clocks for DT
> >     [6/9][V3] ARM: shmobile: r7s72100 dtsi: Add RSPI nodes
> >     [7/9][V3] ARM: shmobile: genmai reference: Add RSPI nodes
> >     [8/9] ARM: shmobile: r8a7791 dtsi: Add QSPI node
> >     [9/9] ARM: shmobile: koelsch: Add QSPI nodes
> 
> Forgot to mention:
> 
> The ARM/shmobile part is based on renesas-devel-v3.13-rc7-20140109v2, with
> Magnus' pinctrl, Wolfram's riic, Simon's sh_eth, Valentine's i2c pinctrl
> and Laurent's SCIF DT work applied on top.
> [Simon: I don't know in which order you will merge these. If you want me
>  to rebase my patches, just ask! Thanks!]

Firstly, I would like an Ack from Magnus on the shmobile patches.

With regards to merge order, my preference is to merge patches
in parallel once their dependencies will no longer change.

So for this series it lools like.

5/9: Can be merged independently of other patches in the series.
     But there isn't much point in merging it until the rest of the
     series is acked and tested.
6-9/9: Needs to wait until 4/9 has at least been acked by Mark
       Also, is 1/9 a run-time dependency of these changes?


--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 0/9] Renesas RSPI/QSPI DT support

[Geert Uytterhoeven]

On Tue, Jan 14, 2014 at 1:53 AM, Simon Horman <horms-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org> wrote:
> On Sun, Jan 12, 2014 at 01:55:19PM +0100, Geert Uytterhoeven wrote:
>> On Sun, Jan 12, 2014 at 12:13 PM, Geert Uytterhoeven
>> <geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org> wrote:
>
>         [1/9] spi: rspi: Add missing clk_disable() calls in error and cleanup paths
>         [2/9] spi: rspi: Convert to clk_prepare_enable/disable_unprepare
>         [3/9] spi: rspi: Use NULL as the clock ID
>         [4/9][V3] spi: rspi: Add DT support
>
>> >     [5/9] ARM: shmobile: r7s72100: Add RSPI clocks for DT
>> >     [6/9][V3] ARM: shmobile: r7s72100 dtsi: Add RSPI nodes
>> >     [7/9][V3] ARM: shmobile: genmai reference: Add RSPI nodes
>> >     [8/9] ARM: shmobile: r8a7791 dtsi: Add QSPI node
>> >     [9/9] ARM: shmobile: koelsch: Add QSPI nodes
>>
>> Forgot to mention:
>>
>> The ARM/shmobile part is based on renesas-devel-v3.13-rc7-20140109v2, with
>> Magnus' pinctrl, Wolfram's riic, Simon's sh_eth, Valentine's i2c pinctrl
>> and Laurent's SCIF DT work applied on top.
>> [Simon: I don't know in which order you will merge these. If you want me
>>  to rebase my patches, just ask! Thanks!]
>
> Firstly, I would like an Ack from Magnus on the shmobile patches.
>
> With regards to merge order, my preference is to merge patches
> in parallel once their dependencies will no longer change.
>
> So for this series it lools like.
>
> 5/9: Can be merged independently of other patches in the series.
>      But there isn't much point in merging it until the rest of the
>      series is acked and tested.

OK.

> 6-9/9: Needs to wait until 4/9 has at least been acked by Mark

OK. Based on Mark's comments, there will be a V4.

>        Also, is 1/9 a run-time dependency of these changes?

1/9 is a bugfix. I'll send a rebased version to Mark, as he wanted to
get that one in first.

2-3/9 are run-time dependencies, but 2/9 won't apply without 1/9.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 0/9] Renesas RSPI/QSPI DT support

[Simon Horman]

On Tue, Jan 14, 2014 at 09:40:34AM +0100, Geert Uytterhoeven wrote:
> On Tue, Jan 14, 2014 at 1:53 AM, Simon Horman <horms@verge.net.au> wrote:
> > On Sun, Jan 12, 2014 at 01:55:19PM +0100, Geert Uytterhoeven wrote:
> >> On Sun, Jan 12, 2014 at 12:13 PM, Geert Uytterhoeven
> >> <geert@linux-m68k.org> wrote:
> >
> >         [1/9] spi: rspi: Add missing clk_disable() calls in error and cleanup paths
> >         [2/9] spi: rspi: Convert to clk_prepare_enable/disable_unprepare
> >         [3/9] spi: rspi: Use NULL as the clock ID
> >         [4/9][V3] spi: rspi: Add DT support
> >
> >> >     [5/9] ARM: shmobile: r7s72100: Add RSPI clocks for DT
> >> >     [6/9][V3] ARM: shmobile: r7s72100 dtsi: Add RSPI nodes
> >> >     [7/9][V3] ARM: shmobile: genmai reference: Add RSPI nodes
> >> >     [8/9] ARM: shmobile: r8a7791 dtsi: Add QSPI node
> >> >     [9/9] ARM: shmobile: koelsch: Add QSPI nodes
> >>
> >> Forgot to mention:
> >>
> >> The ARM/shmobile part is based on renesas-devel-v3.13-rc7-20140109v2, with
> >> Magnus' pinctrl, Wolfram's riic, Simon's sh_eth, Valentine's i2c pinctrl
> >> and Laurent's SCIF DT work applied on top.
> >> [Simon: I don't know in which order you will merge these. If you want me
> >>  to rebase my patches, just ask! Thanks!]
> >
> > Firstly, I would like an Ack from Magnus on the shmobile patches.
> >
> > With regards to merge order, my preference is to merge patches
> > in parallel once their dependencies will no longer change.
> >
> > So for this series it lools like.
> >
> > 5/9: Can be merged independently of other patches in the series.
> >      But there isn't much point in merging it until the rest of the
> >      series is acked and tested.
> 
> OK.
> 
> > 6-9/9: Needs to wait until 4/9 has at least been acked by Mark
> 
> OK. Based on Mark's comments, there will be a V4.
> 
> >        Also, is 1/9 a run-time dependency of these changes?
> 
> 1/9 is a bugfix. I'll send a rebased version to Mark, as he wanted to
> get that one in first.
> 
> 2-3/9 are run-time dependencies, but 2/9 won't apply without 1/9.

run-time dependencies of 6-9/9 ?

Re: [PATCH 0/9] Renesas RSPI/QSPI DT support

[Geert Uytterhoeven]

Hi Simon,

On Wed, Jan 15, 2014 at 12:49 AM, Simon Horman <horms-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org> wrote:
>> >> >     [6/9][V3] ARM: shmobile: r7s72100 dtsi: Add RSPI nodes
>> >> >     [7/9][V3] ARM: shmobile: genmai reference: Add RSPI nodes
>> >> >     [8/9] ARM: shmobile: r8a7791 dtsi: Add QSPI node
>> >> >     [9/9] ARM: shmobile: koelsch: Add QSPI nodes

> run-time dependencies of 6-9/9 ?

None, these are just DT nodes. It may print warnings due to unknown
pinctrl groups and functions, but that's it.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html