From: Steffen Trumtrar <s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
To: tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org
Cc: broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
jkosina-AlSwsSmVLrQ@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
dinguyen-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org,
linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
tthayer.linux-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
tthayer-EIB2kfCEclfQT0dZR+AlfA@public.gmane.org,
axel.lin-8E1dMatC8ynQT0dZR+AlfA@public.gmane.org,
baruch-NswTu9S1W3P6gbPvEgmw2w@public.gmane.org,
andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org
Subject: Re: [PATCH 2/2] arm: dts: socfpga: Add SPI nodes & update copyright.
Date: Tue, 7 Oct 2014 22:31:23 +0200 [thread overview]
Message-ID: <20141007203123.GA15799@pengutronix.de> (raw)
In-Reply-To: <1412711297-31857-3-git-send-email-tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
Hi!
On Tue, Oct 07, 2014 at 02:48:17PM -0500, tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org wrote:
> From: Thor Thayer <tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
>
> Add 2 SPI nodes to SOCFPGA device tree. Update copyright.
> Update spi-dw.txt with bus-num as an optional property.
>
> Signed-off-by: Thor Thayer <tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
> ---
> Documentation/devicetree/bindings/spi/spi-dw.txt | 1 +
> arch/arm/boot/dts/socfpga.dtsi | 52 ++++++++++++++++++----
> 2 files changed, 45 insertions(+), 8 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/spi/spi-dw.txt b/Documentation/devicetree/bindings/spi/spi-dw.txt
> index 7b63ed6..f1d54e6 100644
> --- a/Documentation/devicetree/bindings/spi/spi-dw.txt
> +++ b/Documentation/devicetree/bindings/spi/spi-dw.txt
> @@ -11,6 +11,7 @@ Required properties:
>
> Optional properties:
> - cs-gpios: see spi-bus.txt
> +- bus-num: see spi-bus.txt
>
> Example:
>
> diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
> index 4d77ad6..42855bc 100644
> --- a/arch/arm/boot/dts/socfpga.dtsi
> +++ b/arch/arm/boot/dts/socfpga.dtsi
> @@ -1,15 +1,14 @@
> /*
> - * Copyright (C) 2012 Altera <www.altera.com>
> + * Copyright Altera Corporation (C) 2012-2014. All rights reserved.
> *
> * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or
> - * (at your option) any later version.
> + * it under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
This shouldn't be in the same patch IMHO.
> *
> * You should have received a copy of the GNU General Public License
> * along with this program. If not, see <http://www.gnu.org/licenses/>.
> @@ -628,6 +627,43 @@
> clock-names = "biu", "ciu";
> };
>
> + spi0: spi@fff00000 {
> + compatible = "snps,dw-apb-ssi";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0xfff00000 0x1000>;
> + interrupts = <0 154 4>;
> + num-cs = <4>;
> + bus-num = <0>;
> + clocks = <&per_base_clk>;
> +
> + spidev@0 {
> + compatible = "spidev";
> + reg = <0>; /* chip select */
> + spi-max-frequency = <100000000>;
> + enable-dma = <1>;
> + };
> + };
> +
> + spi1: spi@fff01000 {
> + compatible = "snps,dw-apb-ssi";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0xfff01000 0x1000>;
> + interrupts = <0 156 4>;
> + num-cs = <4>;
> + bus-num = <1>;
> + clocks = <&per_base_clk>;
> + status = "disabled";
> +
> + spidev@0 {
> + compatible = "spidev";
> + reg = <0>;
> + spi-max-frequency = <100000000>;
> + enable-dma = <1>;
> + };
> + };
> +
I don't think, this is the right place. Put it in the board dts.
Oh, and why is spi0 not disabled but spi1 is?
Regards,
Steffen
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-10-07 20:31 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-07 19:48 [PATCH 0/2] SPI: Enable devicetree spi child nodes tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx
[not found] ` <1412711297-31857-1-git-send-email-tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
2014-10-07 19:48 ` [PATCH 1/2] spi: dw: Initialize of_node to discover DT node children tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx
[not found] ` <1412711297-31857-2-git-send-email-tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
2014-10-07 19:42 ` Dinh Nguyen
[not found] ` <54344237.9010809-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
2014-10-07 19:55 ` Thor Thayer
2014-10-07 20:40 ` Mark Brown
[not found] ` <20141007204026.GK4609-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2014-10-07 20:59 ` Thor Thayer
2014-10-08 8:17 ` Andy Shevchenko
2014-10-08 18:27 ` Thor Thayer
2014-10-07 19:48 ` [PATCH 2/2] arm: dts: socfpga: Add SPI nodes & update copyright tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx
[not found] ` <1412711297-31857-3-git-send-email-tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
2014-10-07 20:31 ` Steffen Trumtrar [this message]
2014-10-07 20:55 ` Thor Thayer
[not found] ` <5434535A.9070101-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
2014-10-08 8:01 ` Steffen Trumtrar
2014-10-08 18:07 ` Thor Thayer
2014-10-07 23:12 ` Mark Brown
2014-10-08 18:05 ` Thor Thayer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141007203123.GA15799@pengutronix.de \
--to=s.trumtrar-bicnvbalz9megne8c9+irq@public.gmane.org \
--cc=andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
--cc=axel.lin-8E1dMatC8ynQT0dZR+AlfA@public.gmane.org \
--cc=baruch-NswTu9S1W3P6gbPvEgmw2w@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dinguyen-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=jkosina-AlSwsSmVLrQ@public.gmane.org \
--cc=linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=tthayer-EIB2kfCEclfQT0dZR+AlfA@public.gmane.org \
--cc=tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org \
--cc=tthayer.linux-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).