Re: [PATCHv2] wlcore: spi: add wl18xx support

[Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>]

[-- Attachment #1: Type: text/plain, Size: 856 bytes --]

On Thu, Apr 21, 2016 at 11:07:37AM +0000, Reizer, Eyal wrote:

> * (i) If the transfer isn't the last one in the message, this flag is
> * used to make the chipselect briefly go inactive in the middle of the
> * message.  Toggling chipselect in this way may be needed to terminate
> * a chip command, letting a single spi_message perform all of group of
> * chip transactions together.

> Now, in my case I need the CS pin to go inactive and stay inactive during the transfer 
> of the next byte for completing the SPI init correctly (sending the extra clock cycles while CS is inactive)
> If I read the above correctly, CS will only briefly go inactive but will when the next byte 
> is sent it will be active again.
> What am I missing?

No, it changes the state.  The main use case is a brief bounce but
you can use it for other things.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 473 bytes --]