From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kalle Valo Subject: Re: [v7] wlcore: spi: add wl18xx support Date: Tue, 19 Jul 2016 18:16:36 +0000 (UTC) Message-ID: <20160719181636.B13A660239@smtp.codeaurora.org> References: <1468911482-32560-1-git-send-email-eyalr@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Cc: linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, Eyal Reizer , Eyal Reizer To: Eyal Reizer Return-path: In-Reply-To: <1468911482-32560-1-git-send-email-eyalr-l0cyMroinI0@public.gmane.org> Sender: linux-wireless-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: linux-spi.vger.kernel.org Eyal Reizer wrote: > From: Eyal Reizer > > Add support for using with both wl12xx and wl18xx. > > - all wilink family needs special init command for entering wspi mode. > extra clock cycles should be sent after the spi init command while the > cs pin is high. > - Use inverted chip select for sending a dummy 4 bytes command that > completes the init stage. > > Signed-off-by: Eyal Reizer > Acked-by: Rob Herring Thanks, 1 patch applied to wireless-drivers-next.git: 01efe65aba65 wlcore: spi: add wl18xx support -- Sent by pwcli https://patchwork.kernel.org/patch/9235983/ -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html