From: Ralf Ramsauer <ralf-ex4EvEgDZR1o7HI0AxOeTKwczVv4G7md@public.gmane.org>
To: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Ralf Ramsauer
<ralf-ex4EvEgDZR1o7HI0AxOeTKwczVv4G7md@public.gmane.org>,
Geert Uytterhoeven
<geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
Subject: [PATCH] spi: mark device nodes only in case of successful instantiation
Date: Fri, 14 Oct 2016 21:31:13 +0200 [thread overview]
Message-ID: <20161014193113.29275-1-ralf@ramses-pyramidenbau.de> (raw)
Instantiated SPI device nodes are marked with OF_POPULATE. This was
introduced in bd6c164. On unloading, loaded device nodes will of course
be unmarked. The problem are nodes the fail during initialisation: If a
node failed during registration, it won't be unloaded and hence never be
unmarked again.
So if a SPI driver module is unloaded and reloaded, it will skip nodes
that failed before.
Skip device nodes that are already populated and mark them only in case
of success.
Fixes: bd6c164 ("spi: Mark instantiated device nodes with OF_POPULATE")
Signed-off-by: Ralf Ramsauer <ralf-ex4EvEgDZR1o7HI0AxOeTKwczVv4G7md@public.gmane.org>
Cc: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
---
Hi,
imagine the following situation: you loaded a spi driver as module, but
it fails to instantiate, because of some reasons (e.g. some resources,
like gpios, might be in use in userspace).
When reloading the driver, _all_ nodes, including previously failed
ones, should be probed again. This is not the case at the moment.
Current behaviour only re-registers nodes that were previously
successfully loaded.
This small patches fixes this behaviour. I stumbled over this while
working on a spi driver.
Ralf
drivers/spi/spi.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 200ca22..f96a04e 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -1604,12 +1604,15 @@ static void of_register_spi_devices(struct spi_master *master)
return;
for_each_available_child_of_node(master->dev.of_node, nc) {
- if (of_node_test_and_set_flag(nc, OF_POPULATED))
+ if (of_node_check_flag(nc, OF_POPULATED))
continue;
spi = of_register_spi_device(master, nc);
- if (IS_ERR(spi))
+ if (IS_ERR(spi)) {
dev_warn(&master->dev, "Failed to create SPI device for %s\n",
nc->full_name);
+ continue;
+ }
+ of_node_set_flag(nc, OF_POPULATED);
}
}
#else
--
2.10.1
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2016-10-14 19:31 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-14 19:31 Ralf Ramsauer [this message]
2016-10-16 8:49 ` [PATCH] spi: mark device nodes only in case of successful instantiation Geert Uytterhoeven
2016-10-16 9:32 ` Wolfram Sang
[not found] ` <CAMuHMdUMvjZvwBMUrWTk+obbUYsfRJxPTmdnv7Fz6uzkQ8nbbQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-10-16 9:55 ` Ralf Ramsauer
[not found] ` <39e8d53a-a93d-feeb-044f-9b1b239dff21-ex4EvEgDZR1o7HI0AxOeTKwczVv4G7md@public.gmane.org>
2016-10-17 19:20 ` Pantelis Antoniou
2016-10-17 21:07 ` Wolfram Sang
2016-10-17 21:09 ` Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161014193113.29275-1-ralf@ramses-pyramidenbau.de \
--to=ralf-ex4evegdzr1o7hi0axoetkwczvv4g7md@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).