From mboxrd@z Thu Jan 1 00:00:00 1970 From: Varadarajan Narayanan Subject: Re: [PATCH v3 15/15] spi: qup: support for qup v1 dma Date: Tue, 27 Jun 2017 15:06:46 +0530 Message-ID: <20170627093645.GA21936@codeaurora.org> References: <1497949857-1852-1-git-send-email-varada@codeaurora.org> <1497949857-1852-16-git-send-email-varada@codeaurora.org> <20170623214923.ratchkoay73ytlv3@rob-hp-laptop> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, andy.gross-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, david.brown-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Abhishek Sahu To: Rob Herring Return-path: Content-Disposition: inline In-Reply-To: <20170623214923.ratchkoay73ytlv3@rob-hp-laptop> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: linux-spi.vger.kernel.org Rob, On Fri, Jun 23, 2017 at 04:49:23PM -0500, Rob Herring wrote: > On Tue, Jun 20, 2017 at 02:40:57PM +0530, Varadarajan Narayanan wrote: > > Currently the QUP Version v1 does not work with DMA so added > > the support for the same. > > > > 1. It uses ADM DMA which requires TX and RX CRCI > > 2. DMA channel initialization need to be done after setting > > block size for having valid values in maxburst > > 3. QUP mode should be DMOV instead of BAM. > > > > Signed-off-by: Abhishek Sahu > > Signed-off-by: Varadarajan Narayanan > > --- > > .../devicetree/bindings/spi/qcom,spi-qup.txt | 6 ++++ > > drivers/spi/spi-qup.c | 35 +++++++++++++++++----- > > 2 files changed, 34 insertions(+), 7 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt > > index 5c09077..e754181 100644 > > --- a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt > > +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt > > @@ -38,6 +38,12 @@ Optional properties: > > - dma-names: Names for the dma channels, if present. There must be at > > least one channel named "tx" for transmit and named "rx" for > > receive. > > +- qcom,tx-crci: Identificator for Client Rate Control Interface (CRCI) to be > > Identificator is not a word. > > This sounds like something that should be a cell in the dmas property. I will hold this patch for now. This depends on the ADM driver, which is not upstreamed yet. Will incorporate your feedback and re-post the patch later. Thanks Varada > > + used with TX DMA channel. Required when using DMA for > > + transmission with QUP Version 1 i.e qcom,spi-qup-v1.1.1. > > +- qcom,rx-crci: Identificator for Client Rate Control Interface (CRCI) to be > > + used with RX DMA channel. Required when using DMA for > > + receiving with QUP Version 1 i.e qcom,spi-qup-v1.1.1. > > > > SPI slave nodes must be children of the SPI master node and can contain > > properties described in Documentation/devicetree/bindings/spi/spi-bus.txt -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html