linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Chris Packham <chris.packham-6g8wRflRTwXFdCa3tKVlE6U/zSkkHjvu@public.gmane.org>
To: andy.shevchenko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Cc: linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [RFC PATCH v2 05/12] spi: spi-ep93xx: remove private data 'current_msg'
Date: Fri, 28 Jul 2017 10:03:15 +1200	[thread overview]
Message-ID: <20170727220322.26654-6-chris.packham@alliedtelesis.co.nz> (raw)
In-Reply-To: <20170727220322.26654-1-chris.packham-6g8wRflRTwXFdCa3tKVlE6U/zSkkHjvu@public.gmane.org>

From: H Hartley Sweeten <hsweeten-3FF4nKcrg1dE2c76skzGb0EOCMrvLtNR@public.gmane.org>

The currently in-flight message can be found from the spi master.
Use that instead and remove the private data pointer.

Signed-off-by: H Hartley Sweeten <hsweeten-3FF4nKcrg1dE2c76skzGb0EOCMrvLtNR@public.gmane.org>
---
 drivers/spi/spi-ep93xx.c | 16 +++++-----------
 1 file changed, 5 insertions(+), 11 deletions(-)

diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c
index f276ddee5a2e..dd376266d77e 100644
--- a/drivers/spi/spi-ep93xx.c
+++ b/drivers/spi/spi-ep93xx.c
@@ -74,7 +74,6 @@
  * @mmio: pointer to ioremap()'d registers
  * @sspdr_phys: physical address of the SSPDR register
  * @wait: wait here until given transfer is completed
- * @current_msg: message that is currently processed (or %NULL if none)
  * @tx: current byte in transfer to transmit
  * @rx: current byte in transfer to receive
  * @fifo_level: how full is FIFO (%0..%SPI_FIFO_SIZE - %1). Receiving one
@@ -93,7 +92,6 @@ struct ep93xx_spi {
 	void __iomem			*mmio;
 	unsigned long			sspdr_phys;
 	struct completion		wait;
-	struct spi_message		*current_msg;
 	size_t				tx;
 	size_t				rx;
 	size_t				fifo_level;
@@ -236,8 +234,7 @@ static void ep93xx_do_read(struct ep93xx_spi *espi, struct spi_transfer *t)
 static int ep93xx_spi_read_write(struct spi_master *master)
 {
 	struct ep93xx_spi *espi = spi_master_get_devdata(master);
-	struct spi_message *msg = espi->current_msg;
-	struct spi_transfer *t = msg->state;
+	struct spi_transfer *t = master->cur_msg->state;
 
 	/* read as long as RX FIFO has frames in it */
 	while ((readl(espi->mmio + SSPSR) & SSPSR_RNE)) {
@@ -290,7 +287,7 @@ ep93xx_spi_dma_prepare(struct spi_master *master,
 		       enum dma_transfer_direction dir)
 {
 	struct ep93xx_spi *espi = spi_master_get_devdata(master);
-	struct spi_transfer *t = espi->current_msg->state;
+	struct spi_transfer *t = master->cur_msg->state;
 	struct dma_async_tx_descriptor *txd;
 	enum dma_slave_buswidth buswidth;
 	struct dma_slave_config conf;
@@ -415,13 +412,12 @@ static void ep93xx_spi_dma_callback(void *callback_param)
 static void ep93xx_spi_dma_transfer(struct spi_master *master)
 {
 	struct ep93xx_spi *espi = spi_master_get_devdata(master);
-	struct spi_message *msg = espi->current_msg;
 	struct dma_async_tx_descriptor *rxd, *txd;
 
 	rxd = ep93xx_spi_dma_prepare(master, DMA_DEV_TO_MEM);
 	if (IS_ERR(rxd)) {
 		dev_err(&master->dev, "DMA RX failed: %ld\n", PTR_ERR(rxd));
-		msg->status = PTR_ERR(rxd);
+		master->cur_msg->status = PTR_ERR(rxd);
 		return;
 	}
 
@@ -429,7 +425,7 @@ static void ep93xx_spi_dma_transfer(struct spi_master *master)
 	if (IS_ERR(txd)) {
 		ep93xx_spi_dma_finish(master, DMA_DEV_TO_MEM);
 		dev_err(&master->dev, "DMA TX failed: %ld\n", PTR_ERR(txd));
-		msg->status = PTR_ERR(txd);
+		master->cur_msg->status = PTR_ERR(txd);
 		return;
 	}
 
@@ -587,9 +583,7 @@ static int ep93xx_spi_transfer_one_message(struct spi_master *master,
 	msg->status = 0;
 	msg->actual_length = 0;
 
-	espi->current_msg = msg;
 	ep93xx_spi_process_message(master, msg);
-	espi->current_msg = NULL;
 
 	spi_finalize_current_message(master);
 
@@ -611,7 +605,7 @@ static irqreturn_t ep93xx_spi_interrupt(int irq, void *dev_id)
 		writel(0, espi->mmio + SSPICR);
 		dev_warn(&master->dev,
 			 "receive overrun, aborting the message\n");
-		espi->current_msg->status = -EIO;
+		master->cur_msg->status = -EIO;
 	} else {
 		/*
 		 * Interrupt is either RX (RIS) or TX (TIS). For both cases we
-- 
2.13.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2017-07-27 22:03 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-27 22:03 [RFC PATCH v2 00/12] spi: moving to struct gpio_desc Chris Packham
     [not found] ` <20170727220322.26654-1-chris.packham-6g8wRflRTwXFdCa3tKVlE6U/zSkkHjvu@public.gmane.org>
2017-07-27 22:03   ` [RFC PATCH v2 01/12] spi: spi-ep93xx: use 32-bit read/write for all registers Chris Packham
2017-07-27 22:03   ` [RFC PATCH v2 02/12] spi: spi-ep93xx: add spi master prepare_transfer_hardware() Chris Packham
2017-07-27 22:03   ` [RFC PATCH v2 03/12] spi: spi-ep93xx: absorb the interrupt enable/disable helpers Chris Packham
2017-07-27 22:03   ` [RFC PATCH v2 04/12] spi: spi-ep93xx: pass the spi_master pointer around Chris Packham
2017-07-27 22:03   ` Chris Packham [this message]
2017-07-27 22:03   ` [RFC PATCH v2 06/12] spi: spi-ep93xx: use the default master transfer queueing mechanism Chris Packham
2017-07-27 22:03   ` [RFC PATCH v2 07/12] spi: use gpio_desc instead of numeric gpio Chris Packham
2017-07-27 22:03   ` [RFC PATCH v2 08/12] ARM: ep93xx: add gpiod_lookup_table for spi chip-selects Chris Packham
2017-07-27 22:03   ` [RFC PATCH v2 09/12] ARM: imx: " Chris Packham
2017-07-27 22:03   ` [RFC PATCH v2 10/12] spi: core: convert spi_master to use gpio_desc Chris Packham
     [not found]     ` <20170727220322.26654-11-chris.packham-6g8wRflRTwXFdCa3tKVlE6U/zSkkHjvu@public.gmane.org>
2017-11-24 12:59       ` Geert Uytterhoeven
2017-07-27 22:03   ` [RFC PATCH v2 11/12] ARM: ep93xx: remove chipselect from ep93xx_spi_info Chris Packham
2017-07-27 22:03   ` [RFC PATCH v2 12/12] wip: convert struct spi_device to gpio_desc Chris Packham
     [not found]     ` <20170727220322.26654-13-chris.packham-6g8wRflRTwXFdCa3tKVlE6U/zSkkHjvu@public.gmane.org>
2017-11-24 13:03       ` Geert Uytterhoeven
2017-07-29 13:15   ` [RFC PATCH v2 00/12] spi: moving to struct gpio_desc Andy Shevchenko
     [not found]     ` <CAHp75VeVijF13AO=SqkxtAaiYhss92gwrtCZ2WnxkkKtvjVS3A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-07-29 13:23       ` Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170727220322.26654-6-chris.packham@alliedtelesis.co.nz \
    --to=chris.packham-6g8wrflrtwxfdca3tkvle6u/zskkhjvu@public.gmane.org \
    --cc=andy.shevchenko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).