linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sergey Suloev <ssuloev@orpaltech.com>
To: Mark Brown <broonie@kernel.org>,
	Maxime Ripard <maxime.ripard@bootlin.com>,
	Chen-Yu Tsai <wens@csie.org>
Cc: Sergey Suloev <ssuloev@orpaltech.com>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-spi@vger.kernel.org
Subject: [PATCH 4/6] spi: sun4i: use completion provided by SPI core driver
Date: Thu, 29 Mar 2018 21:59:05 +0300	[thread overview]
Message-ID: <20180329185907.27281-5-ssuloev@orpaltech.com> (raw)
In-Reply-To: <20180329185907.27281-1-ssuloev@orpaltech.com>

As long as the completion already provided by the SPI core
then there is no need to waste extra-memory on this.
Also a waiting function was added to avoid code duplication.

Signed-off-by: Sergey Suloev <ssuloev@orpaltech.com>

---
 drivers/spi/spi-sun4i.c | 62 ++++++++++++++++++++++++++++---------------------
 1 file changed, 35 insertions(+), 27 deletions(-)

diff --git a/drivers/spi/spi-sun4i.c b/drivers/spi/spi-sun4i.c
index 2d716f1..4f24e12 100644
--- a/drivers/spi/spi-sun4i.c
+++ b/drivers/spi/spi-sun4i.c
@@ -92,8 +92,6 @@ struct sun4i_spi {
 	struct clk		*hclk;
 	struct clk		*mclk;
 
-	struct completion	done;
-
 	const u8		*tx_buf;
 	u8			*rx_buf;
 	int			len;
@@ -213,13 +211,36 @@ static size_t sun4i_spi_max_transfer_size(struct spi_device *spi)
 	return SUN4I_FIFO_DEPTH;
 }
 
+static int sun4i_spi_wait_for_transfer(struct spi_device *spi,
+				       struct spi_transfer *tfr)
+{
+	struct spi_master *master = spi->master;
+	unsigned int start, end, tx_time;
+	unsigned int timeout;
+
+	/* calc required timeout from given speed & len values */
+	tx_time = max(tfr->len * 8 * 2 / (tfr->speed_hz / 1000), 100U);
+	start = jiffies;
+	timeout = wait_for_completion_timeout(&master->xfer_completion,
+					      msecs_to_jiffies(tx_time));
+	end = jiffies;
+	if (!timeout) {
+		dev_warn(&master->dev,
+			 "%s: timeout transferring %u bytes@%iHz for %i(%i)ms",
+			 dev_name(&spi->dev), tfr->len, tfr->speed_hz,
+			 jiffies_to_msecs(end - start), tx_time);
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
 static int sun4i_spi_transfer_one(struct spi_master *master,
 				  struct spi_device *spi,
 				  struct spi_transfer *tfr)
 {
 	struct sun4i_spi *sspi = spi_master_get_devdata(master);
-	unsigned int mclk_rate, div, timeout;
-	unsigned int start, end, tx_time;
+	unsigned int mclk_rate, div;
 	unsigned int tx_len = 0;
 	int ret = 0;
 	u32 reg;
@@ -228,7 +249,6 @@ static int sun4i_spi_transfer_one(struct spi_master *master,
 	if (tfr->len > SUN4I_FIFO_DEPTH)
 		return -EMSGSIZE;
 
-	reinit_completion(&sspi->done);
 	sspi->tx_buf = tfr->tx_buf;
 	sspi->rx_buf = tfr->rx_buf;
 	sspi->len = tfr->len;
@@ -328,22 +348,8 @@ static int sun4i_spi_transfer_one(struct spi_master *master,
 	reg = sun4i_spi_read(sspi, SUN4I_CTL_REG);
 	sun4i_spi_write(sspi, SUN4I_CTL_REG, reg | SUN4I_CTL_XCH);
 
-	tx_time = max(tfr->len * 8 * 2 / (tfr->speed_hz / 1000), 100U);
-	start = jiffies;
-	timeout = wait_for_completion_timeout(&sspi->done,
-					      msecs_to_jiffies(tx_time));
-	end = jiffies;
-	if (!timeout) {
-		dev_warn(&master->dev,
-			 "%s: timeout transferring %u bytes@%iHz for %i(%i)ms",
-			 dev_name(&spi->dev), tfr->len, tfr->speed_hz,
-			 jiffies_to_msecs(end - start), tx_time);
-		ret = -ETIMEDOUT;
-		goto out;
-	}
-
+	ret = sun4i_spi_wait_for_transfer(spi, tfr);
 
-out:
 	sun4i_spi_write(sspi, SUN4I_INT_CTL_REG, 0);
 
 	return ret;
@@ -351,14 +357,18 @@ out:
 
 static irqreturn_t sun4i_spi_handler(int irq, void *dev_id)
 {
-	struct sun4i_spi *sspi = dev_id;
-	u32 status = sun4i_spi_read(sspi, SUN4I_INT_STA_REG);
+	struct spi_master *master = dev_id;
+	struct sun4i_spi *sspi = spi_master_get_devdata(master);
+	u32 status;
+
+	status = sun4i_spi_read(sspi, SUN4I_INT_STA_REG);
 
 	/* Transfer complete */
 	if (status & SUN4I_INT_CTL_TC) {
-		sun4i_spi_write(sspi, SUN4I_INT_STA_REG, SUN4I_INT_CTL_TC);
+		sun4i_spi_write(sspi, SUN4I_INT_STA_REG,
+				SUN4I_INT_CTL_TC);
 		sun4i_spi_drain_fifo(sspi, SUN4I_FIFO_DEPTH);
-		complete(&sspi->done);
+		spi_finalize_current_transfer(master);
 		return IRQ_HANDLED;
 	}
 
@@ -447,7 +457,7 @@ static int sun4i_spi_probe(struct platform_device *pdev)
 	}
 
 	ret = devm_request_irq(&pdev->dev, irq, sun4i_spi_handler,
-			       0, dev_name(&pdev->dev), sspi);
+			       0, dev_name(&pdev->dev), master);
 	if (ret) {
 		dev_err(&pdev->dev, "Cannot request IRQ\n");
 		goto err_free_master;
@@ -467,8 +477,6 @@ static int sun4i_spi_probe(struct platform_device *pdev)
 		goto err_free_master;
 	}
 
-	init_completion(&sspi->done);
-
 	/*
 	 * This wake-up/shutdown pattern is to be able to have the
 	 * device woken up, even if runtime_pm is disabled
-- 
2.16.2

  parent reply	other threads:[~2018-03-29 18:59 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-29 18:59 [PATCH 0/6] spi: Add support for DMA transfers in sun4i SPI driver Sergey Suloev
2018-03-29 18:59 ` [PATCH 1/6] spi: core: handle timeout error from transfer_one() Sergey Suloev
2018-03-29 18:59 ` [PATCH 2/6] spi: sun4i: restrict transfer length in PIO-mode Sergey Suloev
2018-04-03  8:10   ` Maxime Ripard
2018-04-03 10:26     ` Sergey Suloev
2018-04-03 11:08     ` Sergey Suloev
2018-04-03 11:40       ` Maxime Ripard
2018-04-03 12:12         ` Sergey Suloev
2018-03-29 18:59 ` [PATCH 3/6] spi: sun4i: coding style/readability improvements Sergey Suloev
2018-03-29 18:59 ` Sergey Suloev [this message]
2018-03-29 18:59 ` [PATCH 5/6] spi: sun4i: introduce register set/unset helpers Sergey Suloev
2018-04-03  8:14   ` Maxime Ripard
2018-04-03 10:27     ` Sergey Suloev
2018-03-29 18:59 ` [PATCH 6/6] spi: sun4i: add DMA transfers support Sergey Suloev
2018-04-03  8:17   ` Maxime Ripard
2018-04-03 13:03     ` Sergey Suloev
2018-04-04  6:27       ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180329185907.27281-5-ssuloev@orpaltech.com \
    --to=ssuloev@orpaltech.com \
    --cc=broonie@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=maxime.ripard@bootlin.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).