linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Piotr Bugalski <bugalski.piotr@gmail.com>
To: Mark Brown <broonie@kernel.org>,
	linux-spi@vger.kernel.org, David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	Boris Brezillon <boris.brezillon@bootlin.com>,
	Marek Vasut <marek.vasut@gmail.com>,
	Richard Weinberger <richard@nod.at>,
	linux-mtd@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Nicolas Ferre <nicolas.ferre@microchip.com>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Cyrille Pitchen <cyrille.pitchen@microchip.com>,
	Tudor Ambarus <tudor.ambarus@microchip.com>,
	Piotr Bugalski <bugalski.piotr@gmail.com>,
	Piotr Bugalski <pbu@cryptera.com>
Subject: [RFC PATCH v2 3/6] mtd: spi-nor: atmel-quadspi: Use spi-mem interface for atmel-quadspi driver
Date: Wed, 27 Jun 2018 15:16:06 +0200	[thread overview]
Message-ID: <20180627131609.13681-4-bugalski.piotr@gmail.com> (raw)
In-Reply-To: <20180627131609.13681-1-bugalski.piotr@gmail.com>

Previously added spi-mem interface is now used instead of older approach.

Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Piotr Bugalski <pbu@cryptera.com>
---
 drivers/mtd/spi-nor/atmel-quadspi.c | 91 ++++++++-----------------------------
 1 file changed, 18 insertions(+), 73 deletions(-)

diff --git a/drivers/mtd/spi-nor/atmel-quadspi.c b/drivers/mtd/spi-nor/atmel-quadspi.c
index c36fcecd569a..3c98a3ee480a 100644
--- a/drivers/mtd/spi-nor/atmel-quadspi.c
+++ b/drivers/mtd/spi-nor/atmel-quadspi.c
@@ -760,27 +760,9 @@ static ssize_t atmel_qspi_read(struct spi_nor *nor, loff_t from, size_t len,
 
 static int atmel_qspi_init(struct atmel_qspi *aq)
 {
-	unsigned long src_rate;
-	u32 mr, scr, scbr;
-
 	/* Reset the QSPI controller */
 	qspi_writel(aq, QSPI_CR, QSPI_CR_SWRST);
 
-	/* Set the QSPI controller in Serial Memory Mode */
-	mr = QSPI_MR_NBBITS(8) | QSPI_MR_SMM;
-	qspi_writel(aq, QSPI_MR, mr);
-
-	src_rate = clk_get_rate(aq->clk);
-	if (!src_rate)
-		return -EINVAL;
-
-	/* Compute the QSPI baudrate */
-	scbr = DIV_ROUND_UP(src_rate, aq->clk_rate);
-	if (scbr > 0)
-		scbr--;
-	scr = QSPI_SCR_SCBR(scbr);
-	qspi_writel(aq, QSPI_SCR, scr);
-
 	/* Enable the QSPI controller */
 	qspi_writel(aq, QSPI_CR, QSPI_CR_QSPIEN);
 
@@ -808,38 +790,25 @@ static irqreturn_t atmel_qspi_interrupt(int irq, void *dev_id)
 
 static int atmel_qspi_probe(struct platform_device *pdev)
 {
-	const struct spi_nor_hwcaps hwcaps = {
-		.mask = SNOR_HWCAPS_READ |
-			SNOR_HWCAPS_READ_FAST |
-			SNOR_HWCAPS_READ_1_1_2 |
-			SNOR_HWCAPS_READ_1_2_2 |
-			SNOR_HWCAPS_READ_2_2_2 |
-			SNOR_HWCAPS_READ_1_1_4 |
-			SNOR_HWCAPS_READ_1_4_4 |
-			SNOR_HWCAPS_READ_4_4_4 |
-			SNOR_HWCAPS_PP |
-			SNOR_HWCAPS_PP_1_1_4 |
-			SNOR_HWCAPS_PP_1_4_4 |
-			SNOR_HWCAPS_PP_4_4_4,
-	};
-	struct device_node *child, *np = pdev->dev.of_node;
+	struct spi_controller *ctrl;
 	struct atmel_qspi *aq;
 	struct resource *res;
-	struct spi_nor *nor;
-	struct mtd_info *mtd;
 	int irq, err = 0;
 
-	if (of_get_child_count(np) != 1)
-		return -ENODEV;
-	child = of_get_next_child(np, NULL);
+	ctrl = spi_alloc_master(&pdev->dev, sizeof(*aq));
+	if (!ctrl)
+		return -ENOMEM;
 
-	aq = devm_kzalloc(&pdev->dev, sizeof(*aq), GFP_KERNEL);
-	if (!aq) {
-		err = -ENOMEM;
-		goto exit;
-	}
+	ctrl->mode_bits = SPI_RX_DUAL | SPI_RX_QUAD | SPI_TX_DUAL | SPI_TX_QUAD;
+	ctrl->setup = atmel_qspi_setup;
+	ctrl->bus_num = -1;
+	ctrl->mem_ops = &atmel_qspi_mem_ops;
+	ctrl->num_chipselect = 1;
+	ctrl->dev.of_node = pdev->dev.of_node;
+	platform_set_drvdata(pdev, ctrl);
+
+	aq = spi_controller_get_devdata(ctrl);
 
-	platform_set_drvdata(pdev, aq);
 	init_completion(&aq->cmd_completion);
 	aq->pdev = pdev;
 
@@ -888,54 +857,30 @@ static int atmel_qspi_probe(struct platform_device *pdev)
 	if (err)
 		goto disable_clk;
 
-	/* Setup the spi-nor */
-	nor = &aq->nor;
-	mtd = &nor->mtd;
-
-	nor->dev = &pdev->dev;
-	spi_nor_set_flash_node(nor, child);
-	nor->priv = aq;
-	mtd->priv = nor;
-
-	nor->read_reg = atmel_qspi_read_reg;
-	nor->write_reg = atmel_qspi_write_reg;
-	nor->read = atmel_qspi_read;
-	nor->write = atmel_qspi_write;
-	nor->erase = atmel_qspi_erase;
-
-	err = of_property_read_u32(child, "spi-max-frequency", &aq->clk_rate);
-	if (err < 0)
-		goto disable_clk;
-
 	err = atmel_qspi_init(aq);
 	if (err)
 		goto disable_clk;
 
-	err = spi_nor_scan(nor, NULL, &hwcaps);
-	if (err)
-		goto disable_clk;
-
-	err = mtd_device_register(mtd, NULL, 0);
+	err = spi_register_controller(ctrl);
 	if (err)
 		goto disable_clk;
 
-	of_node_put(child);
-
 	return 0;
 
 disable_clk:
 	clk_disable_unprepare(aq->clk);
 exit:
-	of_node_put(child);
+	spi_controller_put(ctrl);
 
 	return err;
 }
 
 static int atmel_qspi_remove(struct platform_device *pdev)
 {
-	struct atmel_qspi *aq = platform_get_drvdata(pdev);
+	struct spi_controller *ctrl = platform_get_drvdata(pdev);
+	struct atmel_qspi *aq = spi_controller_get_devdata(ctrl);
 
-	mtd_device_unregister(&aq->nor.mtd);
+	spi_unregister_controller(ctrl);
 	qspi_writel(aq, QSPI_CR, QSPI_CR_QSPIDIS);
 	clk_disable_unprepare(aq->clk);
 	return 0;
-- 
2.11.0

  parent reply	other threads:[~2018-06-27 13:16 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-27 13:16 [RFC PATCH v2 0/6] New QuadSPI driver for Atmel SAMA5D2 Piotr Bugalski
2018-06-27 13:16 ` [RFC PATCH v2 1/6] mtd: spi-nor: atmel-quaspi: Typo fix Piotr Bugalski
2018-07-03 12:52   ` Alexandre Belloni
2018-07-05  7:26     ` Piotr Bugalski
2018-06-27 13:16 ` [RFC PATCH v2 2/6] mtd: spi-nor: atmel-quadspi: Add spi-mem support to atmel-quadspi Piotr Bugalski
2018-06-27 13:16 ` Piotr Bugalski [this message]
2018-06-27 13:16 ` [RFC PATCH v2 4/6] mtd: spi-nor: atmel-quadspi: Remove unused code from atmel-quadspi driver Piotr Bugalski
2018-06-27 13:16 ` [RFC PATCH v2 5/6] spi: Add QuadSPI driver for Atmel SAMA5D2 Piotr Bugalski
2018-08-01 17:27   ` Mark Brown
2018-08-01 19:57     ` Boris Brezillon
2018-08-02 10:17       ` Mark Brown
2018-08-02 10:46         ` Frieder Schrempf
2018-08-02 11:46           ` Mark Brown
2018-08-02 11:48           ` Boris Brezillon
2018-06-27 13:16 ` [RFC PATCH v2 6/6] dt-bindings: spi: " Piotr Bugalski
2018-07-03 22:45   ` Rob Herring
2018-10-31 13:43 ` [RFC PATCH v2 0/6] New " Boris Brezillon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180627131609.13681-4-bugalski.piotr@gmail.com \
    --to=bugalski.piotr@gmail.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=boris.brezillon@bootlin.com \
    --cc=broonie@kernel.org \
    --cc=computersforpeace@gmail.com \
    --cc=cyrille.pitchen@microchip.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dwmw2@infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=marek.vasut@gmail.com \
    --cc=mark.rutland@arm.com \
    --cc=nicolas.ferre@microchip.com \
    --cc=pbu@cryptera.com \
    --cc=richard@nod.at \
    --cc=robh+dt@kernel.org \
    --cc=tudor.ambarus@microchip.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).