Re: [RFC PATCH v2 5/6] spi: Add QuadSPI driver for Atmel SAMA5D2

[Boris Brezillon <boris.brezillon@bootlin.com>]

On Thu, 2 Aug 2018 12:46:36 +0200
Frieder Schrempf <frieder.schrempf@exceet.de> wrote:

> Hi Mark,
> 
> On 02.08.2018 12:17, Mark Brown wrote:
> > On Wed, Aug 01, 2018 at 09:57:33PM +0200, Boris Brezillon wrote:  
> >> Mark Brown <broonie@kernel.org> wrote:  
> >   
> >> 2/ Getting this patch [1] merged and implementing the ->get_name() hook
> >>     in this driver so that SPI NOR devs declared to the MTD layer keep
> >>     the same name after the transition to spi-mem and mtdparts= passed on
> >>     the cmdline keep working. Without this in place we're likely to
> >>     break a few setups :-/.  
> >   
> >> [1]https://patchwork.kernel.org/patch/10508693/  
> > 
> > I don't seem to have a copy of this patch...  not sure it was sent to
> > me?  
> 
> When I sent the patch I put you in cc. So if nothing went wrong you 
> should have it.
> It is part of the SPI MEM conversion series for the FSL QSPI driver [1].
> 
> Boris made some remarks on documentation in v2, that I have fixed, but 
> not sent out yet, as we have some blocking issues with the driver itself.

I don't remember where we were stuck. Are you still waiting answers
from Yogesh? Probably a good time to ping him if that's the case ;-).

> 
> So if you want I could send the patch separately so it can be applied 
> with the Atmel driver.

Yes please, send a v3 for patch 1 and 2.