linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org
To: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Eric Anholt <eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org>,
	Stefan Wahren <stefan.wahren-eS4NqCHxEME@public.gmane.org>,
	Hubert Denkmair
	<h.denkmair-4pT7WzY1KUiELgA04lAiVw@public.gmane.org>,
	linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-rpi-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH 4/9] spi: bcm2835aux: add driver specific stats to debugfs
Date: Sun, 24 Feb 2019 12:54:35 +0000	[thread overview]
Message-ID: <20190224125440.16117-5-kernel@martin.sperl.org> (raw)
In-Reply-To: <20190224125440.16117-1-kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org>

From: Martin Sperl <kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org>

To estimate efficiency add statistics on transfer types
(polling and interrupt) used via debugfs.

Signed-off-by: Martin Sperl <kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org>
---
 drivers/spi/spi-bcm2835aux.c | 61 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 61 insertions(+)

diff --git a/drivers/spi/spi-bcm2835aux.c b/drivers/spi/spi-bcm2835aux.c
index 922fd798508e..0a5f21eb3b99 100644
--- a/drivers/spi/spi-bcm2835aux.c
+++ b/drivers/spi/spi-bcm2835aux.c
@@ -21,6 +21,7 @@

 #include <linux/clk.h>
 #include <linux/completion.h>
+#include <linux/debugfs.h>
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/interrupt.h>
@@ -102,8 +103,57 @@ struct bcm2835aux_spi {
 	int tx_len;
 	int rx_len;
 	int pending;
+
+#if defined(CONFIG_DEBUG_FS)
+#define BCM2835_AUX_INCR(field) ((field)++)
+	u64 count_transfer_polling;
+	u64 count_transfer_irq;
+	u64 count_transfer_irq_after_poll;
+
+	struct dentry *debugfs_dir;
+#else
+#define BCM2835_AUX_INCR(field)
+#endif /* CONFIG_DEBUG_FS */
 };

+#if defined(CONFIG_DEBUG_FS)
+static void bcm2835aux_debugfs_create(struct bcm2835aux_spi *bs,
+				      const char *dname)
+{
+	char name[64];
+	struct dentry *dir;
+
+	/* get full name */
+	snprintf(name, sizeof(name), "spi-bcm2835aux-%s", dname);
+
+	/* the base directory */
+	dir = debugfs_create_dir(name, NULL);
+	bs->debugfs_dir = dir;
+
+	/* the counters */
+	debugfs_create_u64("count_transfer_polling", 0444, dir,
+			   &bs->count_transfer_polling);
+	debugfs_create_u64("count_transfer_irq", 0444, dir,
+			   &bs->count_transfer_irq);
+	debugfs_create_u64("count_transfer_irq_after_poll", 0444, dir,
+			   &bs->count_transfer_irq_after_poll);
+}
+
+static void bcm2835aux_debugfs_remove(struct bcm2835aux_spi *bs)
+{
+	debugfs_remove_recursive(bs->debugfs_dir);
+	bs->debugfs_dir = NULL;
+}
+#else
+static void bcm2835aux_debugfs_create(struct bcm2835aux_spi *bs)
+{
+}
+
+static void bcm2835aux_debugfs_remove(struct bcm2835aux_spi *bs)
+{
+}
+#endif /* CONFIG_DEBUG_FS */
+
 static inline u32 bcm2835aux_rd(struct bcm2835aux_spi *bs, unsigned reg)
 {
 	return readl(bs->regs + reg);
@@ -251,6 +301,9 @@ static int bcm2835aux_spi_transfer_one_irq(struct spi_master *master,
 {
 	struct bcm2835aux_spi *bs = spi_master_get_devdata(master);

+	/* update statistics */
+	BCM2835_AUX_INCR(bs->count_transfer_irq);
+
 	/* fill in registers and fifos before enabling interrupts */
 	bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL1, bs->cntl[1]);
 	bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL0, bs->cntl[0]);
@@ -275,6 +328,9 @@ static int bcm2835aux_spi_transfer_one_poll(struct spi_master *master,
 	unsigned long timeout;
 	u32 stat;

+	/* update statistics */
+	BCM2835_AUX_INCR(bs->count_transfer_polling);
+
 	/* configure spi */
 	bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL1, bs->cntl[1]);
 	bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL0, bs->cntl[0]);
@@ -310,6 +366,7 @@ static int bcm2835aux_spi_transfer_one_poll(struct spi_master *master,
 					    jiffies - timeout,
 					    bs->tx_len, bs->rx_len);
 			/* forward to interrupt handler */
+			BCM2835_AUX_INCR(bs->count_transfer_irq_after_poll);
 			return __bcm2835aux_spi_transfer_one_irq(master,
 							       spi, tfr);
 		}
@@ -555,6 +612,8 @@ static int bcm2835aux_spi_probe(struct platform_device *pdev)
 		goto out_clk_disable;
 	}

+	bcm2835aux_debugfs_create(bs, dev_name(&pdev->dev));
+
 	return 0;

 out_clk_disable:
@@ -569,6 +628,8 @@ static int bcm2835aux_spi_remove(struct platform_device *pdev)
 	struct spi_master *master = platform_get_drvdata(pdev);
 	struct bcm2835aux_spi *bs = spi_master_get_devdata(master);

+	bcm2835aux_debugfs_remove(bs);
+
 	bcm2835aux_spi_reset_hw(bs);

 	/* disable the HW block by releasing the clock */
--
2.11.0

  parent reply	other threads:[~2019-02-24 12:54 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-24 12:54 [PATCH 0/9] spi: bcm2835aux: bug fixes and improvements kernel-TqfNSX0MhmxHKSADF0wUEw
2019-02-24 12:54 ` [PATCH 1/9] spi: bcm2835aux: fix driver to not allow 65535 (=-1) cs-gpios kernel
2019-02-24 12:54 ` [PATCH 6/9] spi: bcm2835aux: unifying code between polling and interrupt driven code kernel
     [not found] ` <20190224125440.16117-1-kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org>
2019-02-24 12:54   ` [PATCH 2/9] spi: bcm2835aux: warn in dmesg that native cs is not really supported kernel-TqfNSX0MhmxHKSADF0wUEw
2019-02-24 12:54   ` [PATCH 3/9] spi: bcm2835aux: setup gpio-cs to output and correct level during setup kernel-TqfNSX0MhmxHKSADF0wUEw
2019-02-24 12:54   ` kernel-TqfNSX0MhmxHKSADF0wUEw [this message]
2019-02-24 12:54   ` [PATCH 5/9] spi: bcm2835aux: make the polling duration limits configurable kernel-TqfNSX0MhmxHKSADF0wUEw
2019-02-24 12:54   ` [PATCH 7/9] spi: bcm2835aux: remove dangerous uncontrolled read of fifo kernel-TqfNSX0MhmxHKSADF0wUEw
2019-02-24 12:54   ` [PATCH 8/9] spi: bcm2835aux: use BCM2835_AUX_SPI_STAT_RX_LVL kernel-TqfNSX0MhmxHKSADF0wUEw
2019-02-24 12:54   ` [PATCH 9/9] spi: bcm2835aux: remove dead code kernel-TqfNSX0MhmxHKSADF0wUEw
2019-02-24 19:22   ` [PATCH 0/9] spi: bcm2835aux: bug fixes and improvements Stefan Wahren
2019-02-24 20:11     ` kernel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190224125440.16117-5-kernel@martin.sperl.org \
    --to=kernel-tqfnsx0mhmxhksadf0wuew@public.gmane.org \
    --cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org \
    --cc=h.denkmair-4pT7WzY1KUiELgA04lAiVw@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-rpi-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=stefan.wahren-eS4NqCHxEME@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).