[PATCH V3 3/9] spi: bcm2835aux: fix corruptions for longer spi transfers

[kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org]

From: Martin Sperl <kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org>

On long running tests with a mcp2517fd can controller it showed that
on rare occations the data read shows corruptions for longer spi transfers.

Example of a 22 byte transfer:

expected (as captured on logic analyzer):
FF FF 78 00 00 00 08 06 00 00 91 20 77 56 84 85 86 87 88 89 8a 8b

read by the driver:
FF FF 78 00 00 00 08 06 00 00 91 20 77 56 84 88 89 8a 00 00 8b 9b

To fix this use BCM2835_AUX_SPI_STAT_RX_LVL to determine when we may
read data from the fifo reliably without any corruption.

Surprisingly the only values ever empirically read in
BCM2835_AUX_SPI_STAT_RX_LVL are 0x00, 0x10, 0x20 and 0x30.
So whenever the mask is not 0 we can read from the fifo in a safe manner.

The patch has now been tested intensively and we are no longer
able to reproduce the "RX" issue any longer.

Fixes: 1ea29b39f4c812ec ("spi: bcm2835aux: add bcm2835 auxiliary spi device...")

Reported-by: Hubert Denkmair <h.denkmair-4pT7WzY1KUiELgA04lAiVw@public.gmane.org>
Signed-off-by: Martin Sperl <kernel-TqfNSX0MhmxHKSADF0wUEw@public.gmane.org>
---
 drivers/spi/spi-bcm2835aux.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spi-bcm2835aux.c b/drivers/spi/spi-bcm2835aux.c
index 0838dbda57c7..d9e62f717a45 100644
--- a/drivers/spi/spi-bcm2835aux.c
+++ b/drivers/spi/spi-bcm2835aux.c
@@ -180,12 +180,12 @@ static void bcm2835aux_spi_reset_hw(struct bcm2835aux_spi *bs)

 static void bcm2835aux_spi_transfer_helper(struct bcm2835aux_spi *bs)
 {
+	u32 stat = bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT);
+
 	/* check if we have data to read */
-	while (bs->rx_len &&
-	       (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT) &
-		  BCM2835_AUX_SPI_STAT_RX_EMPTY))) {
+	for (; bs->rx_len && (stat & BCM2835_AUX_SPI_STAT_RX_LVL);
+	     stat = bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT))
 		bcm2835aux_rd_fifo(bs);
-	}

 	/* check if we have data to write */
 	while (bs->tx_len &&
--
2.11.0