[PATCH AUTOSEL 5.2 024/123] spi: pxa2xx: Balance runtime PM enable/disable on error

[Sasha Levin <sashal@kernel.org>]

From: Lubomir Rintel <lkundrak@v3.sk>

[ Upstream commit 1274204542f683e1d8491ebe9cc86284d5a8ebcc ]

Don't undo the PM initialization if we error out before we managed to
initialize it. The call to pm_runtime_disable() without being preceded
by pm_runtime_enable() would disturb the balance of the Force.

In practice, this happens if we fail to allocate any of the GPIOS ("cs",
"ready") due to -EPROBE_DEFER because we're getting probled before the
GPIO driver.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20190719122713.3444318-1-lkundrak@v3.sk
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-pxa2xx.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index af3f37ba82c83..c1af8887d9186 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1817,14 +1817,16 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
 	status = devm_spi_register_controller(&pdev->dev, controller);
 	if (status != 0) {
 		dev_err(&pdev->dev, "problem registering spi controller\n");
-		goto out_error_clock_enabled;
+		goto out_error_pm_runtime_enabled;
 	}
 
 	return status;
 
-out_error_clock_enabled:
+out_error_pm_runtime_enabled:
 	pm_runtime_put_noidle(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
+
+out_error_clock_enabled:
 	clk_disable_unprepare(ssp->clk);
 
 out_error_dma_irq_alloc:
-- 
2.20.1