[PATCH AUTOSEL 4.14 014/150] spi: sh-msiof: fix deferred probing

[PATCH AUTOSEL 4.14 014/150] spi: sh-msiof: fix deferred probing

[Sasha Levin]

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

[ Upstream commit f34c6e6257aa477cdfe7e9bbbecd3c5648ecda69 ]

Since commit 9ec36cafe43b ("of/irq: do irq resolution in platform_get_irq")
platform_get_irq() can return -EPROBE_DEFER. However, the driver overrides
an error returned by that function with -ENOENT which breaks the deferred
probing. Propagate upstream an error code returned by platform_get_irq()
and remove the bogus "platform" from the error message, while at it...

Fixes: 9ec36cafe43b ("of/irq: do irq resolution in platform_get_irq")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-sh-msiof.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
index db2a529accae8..a7bd3c92356be 100644
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -1283,8 +1283,8 @@ static int sh_msiof_spi_probe(struct platform_device *pdev)
 
 	i = platform_get_irq(pdev, 0);
 	if (i < 0) {
-		dev_err(&pdev->dev, "cannot get platform IRQ\n");
-		ret = -ENOENT;
+		dev_err(&pdev->dev, "cannot get IRQ\n");
+		ret = i;
 		goto err1;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 057/150] spi: omap2-mcspi: Set FIFO DMA trigger level to word length

[Sasha Levin]

From: Vignesh R <vigneshr@ti.com>

[ Upstream commit b682cffa3ac6d9d9e16e9b413c45caee3b391fab ]

McSPI has 32 byte FIFO in Transmit-Receive mode. Current code tries to
configuration FIFO watermark level for DMA trigger to be GCD of transfer
length and max FIFO size which would mean trigger level may be set to 32
for transmit-receive mode if length is aligned. This does not work in
case of SPI slave mode where FIFO always needs to have data ready
whenever master starts the clock. With DMA trigger size of 32 there will
be a small window during slave TX where DMA is still putting data into
FIFO but master would have started clock for next byte, resulting in
shifting out of stale data. Similarly, on Slave RX side there may be RX
FIFO overflow
Fix this by setting FIFO watermark for DMA trigger to word
length. This means DMA is triggered as soon as FIFO has space for word
length bytes and DMA would make sure FIFO is almost always full
therefore improving FIFO occupancy in both master and slave mode.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-omap2-mcspi.c | 26 +++++++-------------------
 1 file changed, 7 insertions(+), 19 deletions(-)

diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 9bf64e6eca9ba..517d0ade586bd 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -298,7 +298,7 @@ static void omap2_mcspi_set_fifo(const struct spi_device *spi,
 	struct omap2_mcspi_cs *cs = spi->controller_state;
 	struct omap2_mcspi *mcspi;
 	unsigned int wcnt;
-	int max_fifo_depth, fifo_depth, bytes_per_word;
+	int max_fifo_depth, bytes_per_word;
 	u32 chconf, xferlevel;
 
 	mcspi = spi_master_get_devdata(master);
@@ -314,10 +314,6 @@ static void omap2_mcspi_set_fifo(const struct spi_device *spi,
 		else
 			max_fifo_depth = OMAP2_MCSPI_MAX_FIFODEPTH;
 
-		fifo_depth = gcd(t->len, max_fifo_depth);
-		if (fifo_depth < 2 || fifo_depth % bytes_per_word != 0)
-			goto disable_fifo;
-
 		wcnt = t->len / bytes_per_word;
 		if (wcnt > OMAP2_MCSPI_MAX_FIFOWCNT)
 			goto disable_fifo;
@@ -325,16 +321,17 @@ static void omap2_mcspi_set_fifo(const struct spi_device *spi,
 		xferlevel = wcnt << 16;
 		if (t->rx_buf != NULL) {
 			chconf |= OMAP2_MCSPI_CHCONF_FFER;
-			xferlevel |= (fifo_depth - 1) << 8;
+			xferlevel |= (bytes_per_word - 1) << 8;
 		}
+
 		if (t->tx_buf != NULL) {
 			chconf |= OMAP2_MCSPI_CHCONF_FFET;
-			xferlevel |= fifo_depth - 1;
+			xferlevel |= bytes_per_word - 1;
 		}
 
 		mcspi_write_reg(master, OMAP2_MCSPI_XFERLEVEL, xferlevel);
 		mcspi_write_chconf0(spi, chconf);
-		mcspi->fifo_depth = fifo_depth;
+		mcspi->fifo_depth = max_fifo_depth;
 
 		return;
 	}
@@ -601,7 +598,6 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
 	struct dma_slave_config	cfg;
 	enum dma_slave_buswidth width;
 	unsigned es;
-	u32			burst;
 	void __iomem		*chstat_reg;
 	void __iomem            *irqstat_reg;
 	int			wait_res;
@@ -623,22 +619,14 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
 	}
 
 	count = xfer->len;
-	burst = 1;
-
-	if (mcspi->fifo_depth > 0) {
-		if (count > mcspi->fifo_depth)
-			burst = mcspi->fifo_depth / es;
-		else
-			burst = count / es;
-	}
 
 	memset(&cfg, 0, sizeof(cfg));
 	cfg.src_addr = cs->phys + OMAP2_MCSPI_RX0;
 	cfg.dst_addr = cs->phys + OMAP2_MCSPI_TX0;
 	cfg.src_addr_width = width;
 	cfg.dst_addr_width = width;
-	cfg.src_maxburst = burst;
-	cfg.dst_maxburst = burst;
+	cfg.src_maxburst = es;
+	cfg.dst_maxburst = es;
 
 	rx = xfer->rx_buf;
 	tx = xfer->tx_buf;
-- 
2.20.1

[PATCH AUTOSEL 4.14 146/150] spi: omap2-mcspi: Fix DMA and FIFO event trigger size mismatch

[Sasha Levin]

From: Vignesh R <vigneshr@ti.com>

[ Upstream commit baf8b9f8d260c55a86405f70a384c29cda888476 ]

Commit b682cffa3ac6 ("spi: omap2-mcspi: Set FIFO DMA trigger level to word length")
broke SPI transfers where bits_per_word != 8. This is because of
mimsatch between McSPI FIFO level event trigger size (SPI word length) and
DMA request size(word length * maxburst). This leads to data
corruption, lockup and errors like:

	spi1.0: EOW timed out

Fix this by setting DMA maxburst size to 1 so that
McSPI FIFO level event trigger size matches DMA request size.

Fixes: b682cffa3ac6 ("spi: omap2-mcspi: Set FIFO DMA trigger level to word length")
Cc: stable@vger.kernel.org
Reported-by: David Lechner <david@lechnology.com>
Tested-by: David Lechner <david@lechnology.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-omap2-mcspi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 517d0ade586bd..1db4d3c1d2bfa 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -625,8 +625,8 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
 	cfg.dst_addr = cs->phys + OMAP2_MCSPI_TX0;
 	cfg.src_addr_width = width;
 	cfg.dst_addr_width = width;
-	cfg.src_maxburst = es;
-	cfg.dst_maxburst = es;
+	cfg.src_maxburst = 1;
+	cfg.dst_maxburst = 1;
 
 	rx = xfer->rx_buf;
 	tx = xfer->tx_buf;
-- 
2.20.1