[PATCH AUTOSEL 4.9 05/91] spi: Add call to spi_slave_abort() function when spidev driver is released

[PATCH AUTOSEL 4.9 05/91] spi: Add call to spi_slave_abort() function when spidev driver is released

[Sasha Levin]

From: Lukasz Majewski <lukma@denx.de>

[ Upstream commit 9f918a728cf86b2757b6a7025e1f46824bfe3155 ]

This change is necessary for spidev devices (e.g. /dev/spidev3.0) working
in the slave mode (like NXP's dspi driver for Vybrid SoC).

When SPI HW works in this mode - the master is responsible for providing
CS and CLK signals. However, when some fault happens - like for example
distortion on SPI lines - the SPI Linux driver needs a chance to recover
from this abnormal situation and prepare itself for next (correct)
transmission.

This change doesn't pose any threat on drivers working in master mode as
spi_slave_abort() function checks if SPI slave mode is supported.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Link: https://lore.kernel.org/r/20190924110547.14770-2-lukma@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Reported-by: kbuild test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20190925091143.15468-2-lukma@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spidev.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index f4ea286b0121e..a685c6114a8d5 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -663,6 +663,9 @@ static int spidev_release(struct inode *inode, struct file *filp)
 		if (dofree)
 			kfree(spidev);
 	}
+#ifdef CONFIG_SPI_SLAVE
+	spi_slave_abort(spidev->spi);
+#endif
 	mutex_unlock(&device_list_lock);
 
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 4.9 49/91] spi: img-spfi: fix potential double release

[Sasha Levin]

From: Pan Bian <bianpan2016@163.com>

[ Upstream commit e9a8ba9769a0e354341bc6cc01b98aadcea1dfe9 ]

The channels spfi->tx_ch and spfi->rx_ch are not set to NULL after they
are released. As a result, they will be released again, either on the
error handling branch in the same function or in the corresponding
remove function, i.e. img_spfi_remove(). This patch fixes the bug by
setting the two members to NULL.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/1573007769-20131-1-git-send-email-bianpan2016@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-img-spfi.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/spi/spi-img-spfi.c b/drivers/spi/spi-img-spfi.c
index 7a37090dabbea..2e65b70c78792 100644
--- a/drivers/spi/spi-img-spfi.c
+++ b/drivers/spi/spi-img-spfi.c
@@ -673,6 +673,8 @@ static int img_spfi_probe(struct platform_device *pdev)
 			dma_release_channel(spfi->tx_ch);
 		if (spfi->rx_ch)
 			dma_release_channel(spfi->rx_ch);
+		spfi->tx_ch = NULL;
+		spfi->rx_ch = NULL;
 		dev_warn(spfi->dev, "Failed to get DMA channels, falling back to PIO mode\n");
 	} else {
 		master->dma_tx = spfi->tx_ch;
-- 
2.20.1

[PATCH AUTOSEL 4.9 68/91] spi: pxa2xx: Add missed security checks

[Sasha Levin]

From: Chuhong Yuan <hslester96@gmail.com>

[ Upstream commit 5eb263ef08b5014cfc2539a838f39d2fd3531423 ]

pxa2xx_spi_init_pdata misses checks for devm_clk_get and
platform_get_irq.
Add checks for them to fix the bugs.

Since ssp->clk and ssp->irq are used in probe, they are mandatory here.
So we cannot use _optional() for devm_clk_get and platform_get_irq.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20191109080943.30428-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-pxa2xx.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index 6dd195b94c578..2f84d7653afd4 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1529,7 +1529,13 @@ pxa2xx_spi_init_pdata(struct platform_device *pdev)
 	}
 
 	ssp->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(ssp->clk))
+		return NULL;
+
 	ssp->irq = platform_get_irq(pdev, 0);
+	if (ssp->irq < 0)
+		return NULL;
+
 	ssp->type = type;
 	ssp->pdev = pdev;
 	ssp->port_id = pxa2xx_spi_get_port_id(adev);
-- 
2.20.1

[PATCH AUTOSEL 4.9 77/91] spi: tegra20-slink: add missed clk_unprepare

[Sasha Levin]

From: Chuhong Yuan <hslester96@gmail.com>

[ Upstream commit 04358e40ba96d687c0811c21d9dede73f5244a98 ]

The driver misses calling clk_unprepare in probe failure and remove.
Add the calls to fix it.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20191115083122.12278-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-tegra20-slink.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c
index af2880d0c1126..cf2a329fd8958 100644
--- a/drivers/spi/spi-tegra20-slink.c
+++ b/drivers/spi/spi-tegra20-slink.c
@@ -1078,7 +1078,7 @@ static int tegra_slink_probe(struct platform_device *pdev)
 	ret = clk_enable(tspi->clk);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Clock enable failed %d\n", ret);
-		goto exit_free_master;
+		goto exit_clk_unprepare;
 	}
 
 	spi_irq = platform_get_irq(pdev, 0);
@@ -1151,6 +1151,8 @@ static int tegra_slink_probe(struct platform_device *pdev)
 	free_irq(spi_irq, tspi);
 exit_clk_disable:
 	clk_disable(tspi->clk);
+exit_clk_unprepare:
+	clk_unprepare(tspi->clk);
 exit_free_master:
 	spi_master_put(master);
 	return ret;
@@ -1164,6 +1166,7 @@ static int tegra_slink_remove(struct platform_device *pdev)
 	free_irq(tspi->irq, tspi);
 
 	clk_disable(tspi->clk);
+	clk_unprepare(tspi->clk);
 
 	if (tspi->tx_dma_chan)
 		tegra_slink_deinit_dma_param(tspi, false);
-- 
2.20.1

[PATCH AUTOSEL 4.9 81/91] spi: st-ssc4: add missed pm_runtime_disable

[Sasha Levin]

From: Chuhong Yuan <hslester96@gmail.com>

[ Upstream commit cd050abeba2a95fe5374eec28ad2244617bcbab6 ]

The driver forgets to call pm_runtime_disable in probe failure
and remove.
Add the missed calls to fix it.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20191118024848.21645-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-st-ssc4.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/spi/spi-st-ssc4.c b/drivers/spi/spi-st-ssc4.c
index e54b596384582..710adbc2485f5 100644
--- a/drivers/spi/spi-st-ssc4.c
+++ b/drivers/spi/spi-st-ssc4.c
@@ -385,6 +385,7 @@ static int spi_st_probe(struct platform_device *pdev)
 	return 0;
 
 clk_disable:
+	pm_runtime_disable(&pdev->dev);
 	clk_disable_unprepare(spi_st->clk);
 put_master:
 	spi_master_put(master);
@@ -396,6 +397,8 @@ static int spi_st_remove(struct platform_device *pdev)
 	struct spi_master *master = platform_get_drvdata(pdev);
 	struct spi_st *spi_st = spi_master_get_devdata(master);
 
+	pm_runtime_disable(&pdev->dev);
+
 	clk_disable_unprepare(spi_st->clk);
 
 	pinctrl_pm_select_sleep_state(&pdev->dev);
-- 
2.20.1