From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
To: broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org
Cc: linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
wan.ahmad.zainie.wan.mohamad-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org
Subject: [PATCH 2/7] spi: dw: Add update_cr0() callback to update CTRLR0
Date: Thu, 12 Mar 2020 19:31:24 +0800 [thread overview]
Message-ID: <20200312113129.8198-3-wan.ahmad.zainie.wan.mohamad@intel.com> (raw)
In-Reply-To: <20200312113129.8198-1-wan.ahmad.zainie.wan.mohamad-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
This patch adds update_cr0() callback, in struct dw_spi.
Existing code that configure register CTRLR0 is moved into a new
function, dw_spi_update_cr0(), and this will be the default.
Suggested-by: Andy Shevchenko <andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Signed-off-by: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
drivers/spi/spi-dw-mid.c | 4 +++
drivers/spi/spi-dw-mmio.c | 21 +++++++++++--
drivers/spi/spi-dw.c | 66 +++++++++++++++++++++++++--------------
drivers/spi/spi-dw.h | 5 +++
4 files changed, 69 insertions(+), 27 deletions(-)
diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c
index 0d86c37e0aeb..9cc010e9737e 100644
--- a/drivers/spi/spi-dw-mid.c
+++ b/drivers/spi/spi-dw-mid.c
@@ -318,5 +318,9 @@ int dw_spi_mid_init(struct dw_spi *dws)
dws->dma_rx = &mid_dma_rx;
dws->dma_ops = &mid_dma_ops;
#endif
+
+ /* Register hook to configure CTRLR0 */
+ dws->update_cr0 = dw_spi_update_cr0;
+
return 0;
}
diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c
index 384a3ab6dc2d..a52f75e22109 100644
--- a/drivers/spi/spi-dw-mmio.c
+++ b/drivers/spi/spi-dw-mmio.c
@@ -106,6 +106,9 @@ static int dw_spi_mscc_init(struct platform_device *pdev,
dwsmmio->dws.set_cs = dw_spi_mscc_set_cs;
dwsmmio->priv = dwsmscc;
+ /* Register hook to configure CTRLR0 */
+ dwsmmio->dws.update_cr0 = dw_spi_update_cr0;
+
return 0;
}
@@ -128,6 +131,18 @@ static int dw_spi_alpine_init(struct platform_device *pdev,
{
dwsmmio->dws.cs_override = 1;
+ /* Register hook to configure CTRLR0 */
+ dwsmmio->dws.update_cr0 = dw_spi_update_cr0;
+
+ return 0;
+}
+
+static int dw_spi_dw_apb_init(struct platform_device *pdev,
+ struct dw_spi_mmio *dwsmmio)
+{
+ /* Register hook to configure CTRLR0 */
+ dwsmmio->dws.update_cr0 = dw_spi_update_cr0;
+
return 0;
}
@@ -224,17 +239,17 @@ static int dw_spi_mmio_remove(struct platform_device *pdev)
}
static const struct of_device_id dw_spi_mmio_of_match[] = {
- { .compatible = "snps,dw-apb-ssi", },
+ { .compatible = "snps,dw-apb-ssi", .data = dw_spi_dw_apb_init},
{ .compatible = "mscc,ocelot-spi", .data = dw_spi_mscc_ocelot_init},
{ .compatible = "mscc,jaguar2-spi", .data = dw_spi_mscc_jaguar2_init},
{ .compatible = "amazon,alpine-dw-apb-ssi", .data = dw_spi_alpine_init},
- { .compatible = "renesas,rzn1-spi", },
+ { .compatible = "renesas,rzn1-spi", .data = dw_spi_dw_apb_init},
{ /* end of table */}
};
MODULE_DEVICE_TABLE(of, dw_spi_mmio_of_match);
static const struct acpi_device_id dw_spi_mmio_acpi_match[] = {
- {"HISI0173", 0},
+ {"HISI0173", (kernel_ulong_t)dw_spi_dw_apb_init},
{},
};
MODULE_DEVICE_TABLE(acpi, dw_spi_mmio_acpi_match);
diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index fbbafb099571..b475fd32f39a 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -277,6 +277,47 @@ static int poll_transfer(struct dw_spi *dws)
return 0;
}
+static u8 dw_spi_update_tmode(struct dw_spi *dws)
+{
+ if (!dws->tx)
+ return SPI_TMOD_RO;
+ if (!dws->rx)
+ return SPI_TMOD_TO;
+
+ return SPI_TMOD_TR;
+}
+
+/* Configure CTRLR0 for DW_apb_ssi */
+u32 dw_spi_update_cr0(struct spi_controller *master, struct spi_device *spi,
+ struct spi_transfer *transfer)
+{
+ struct dw_spi *dws = spi_controller_get_devdata(master);
+ struct chip_data *chip = spi_get_ctldata(spi);
+ u32 cr0;
+
+ /* Default SPI mode is SCPOL = 0, SCPH = 0 */
+ cr0 = (transfer->bits_per_word - 1)
+ | (chip->type << SPI_FRF_OFFSET)
+ | ((((spi->mode & SPI_CPOL) ? 1 : 0) << SPI_SCOL_OFFSET) |
+ (((spi->mode & SPI_CPHA) ? 1 : 0) << SPI_SCPH_OFFSET) |
+ (((spi->mode & SPI_LOOP) ? 1 : 0) << SPI_SRL_OFFSET))
+ | (chip->tmode << SPI_TMOD_OFFSET);
+
+ /*
+ * Adjust transfer mode if necessary. Requires platform dependent
+ * chipselect mechanism.
+ */
+ if (chip->cs_control) {
+ chip->tmode = dw_spi_update_tmode(dws);
+
+ cr0 &= ~SPI_TMOD_MASK;
+ cr0 |= (chip->tmode << SPI_TMOD_OFFSET);
+ }
+
+ return cr0;
+}
+EXPORT_SYMBOL_GPL(dw_spi_update_cr0);
+
static int dw_spi_transfer_one(struct spi_controller *master,
struct spi_device *spi, struct spi_transfer *transfer)
{
@@ -316,30 +357,7 @@ static int dw_spi_transfer_one(struct spi_controller *master,
dws->n_bytes = DIV_ROUND_UP(transfer->bits_per_word, BITS_PER_BYTE);
dws->dma_width = DIV_ROUND_UP(transfer->bits_per_word, BITS_PER_BYTE);
- /* Default SPI mode is SCPOL = 0, SCPH = 0 */
- cr0 = (transfer->bits_per_word - 1)
- | (chip->type << SPI_FRF_OFFSET)
- | ((((spi->mode & SPI_CPOL) ? 1 : 0) << SPI_SCOL_OFFSET) |
- (((spi->mode & SPI_CPHA) ? 1 : 0) << SPI_SCPH_OFFSET) |
- (((spi->mode & SPI_LOOP) ? 1 : 0) << SPI_SRL_OFFSET))
- | (chip->tmode << SPI_TMOD_OFFSET);
-
- /*
- * Adjust transfer mode if necessary. Requires platform dependent
- * chipselect mechanism.
- */
- if (chip->cs_control) {
- if (dws->rx && dws->tx)
- chip->tmode = SPI_TMOD_TR;
- else if (dws->rx)
- chip->tmode = SPI_TMOD_RO;
- else
- chip->tmode = SPI_TMOD_TO;
-
- cr0 &= ~SPI_TMOD_MASK;
- cr0 |= (chip->tmode << SPI_TMOD_OFFSET);
- }
-
+ cr0 = dws->update_cr0(master, spi, transfer);
dw_writel(dws, DW_SPI_CTRLR0, cr0);
/* Check if current transfer is a DMA transaction */
diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h
index 445362c23fde..d4d3b0b6f5d5 100644
--- a/drivers/spi/spi-dw.h
+++ b/drivers/spi/spi-dw.h
@@ -114,6 +114,8 @@ struct dw_spi {
u16 bus_num;
u16 num_cs; /* supported slave numbers */
void (*set_cs)(struct spi_device *spi, bool enable);
+ u32 (*update_cr0)(struct spi_controller *master, struct spi_device *spi,
+ struct spi_transfer *transfer);
/* Current message transfer state info */
size_t len;
@@ -252,6 +254,9 @@ extern int dw_spi_add_host(struct device *dev, struct dw_spi *dws);
extern void dw_spi_remove_host(struct dw_spi *dws);
extern int dw_spi_suspend_host(struct dw_spi *dws);
extern int dw_spi_resume_host(struct dw_spi *dws);
+extern u32 dw_spi_update_cr0(struct spi_controller *master,
+ struct spi_device *spi,
+ struct spi_transfer *transfer);
/* platform related setup */
extern int dw_spi_mid_init(struct dw_spi *dws); /* Intel MID platforms */
--
2.17.1
next prev parent reply other threads:[~2020-03-12 11:31 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-12 11:31 [PATCH 0/7] spi:dw: Add support for Intel Keem Bay SPI Wan Ahmad Zainie
[not found] ` <20200312113129.8198-1-wan.ahmad.zainie.wan.mohamad-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2020-03-12 11:31 ` [PATCH 1/7] spi: dw: Fix typo in few registers name Wan Ahmad Zainie
2020-03-12 11:31 ` Wan Ahmad Zainie [this message]
2020-03-12 11:31 ` [PATCH 3/7] dt-bindings: spi: dw-apb-ssi: Convert bindings to json-schema Wan Ahmad Zainie
2020-03-30 16:54 ` Rob Herring
2020-04-02 6:21 ` Wan Mohamad, Wan Ahmad Zainie
2020-03-12 11:31 ` [PATCH 4/7] dt-bindings: spi: dw-apb-ssi: Add compatible string for DesignWare DWC_ssi Wan Ahmad Zainie
2020-03-12 11:31 ` [PATCH 5/7] spi: dw: Add support " Wan Ahmad Zainie
2020-03-12 11:31 ` [PATCH 6/7] dt-bindings: spi: dw-apb-ssi: Add Intel Keem Bay support Wan Ahmad Zainie
2020-03-12 11:31 ` [PATCH 7/7] spi: dw: Add support for Intel Keem Bay SPI Wan Ahmad Zainie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200312113129.8198-3-wan.ahmad.zainie.wan.mohamad@intel.com \
--to=wan.ahmad.zainie.wan.mohamad-ral2jqcrhueavxtiumwx3w@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).