linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Vignesh Raghavendra <vigneshr@ti.com>,
	Mark Brown <broonie@kernel.org>, Sasha Levin <sashal@kernel.org>,
	linux-spi@vger.kernel.org
Subject: [PATCH AUTOSEL 5.4 02/35] spi: spi-omap2-mcspi: Support probe deferral for DMA channels
Date: Sun, 15 Mar 2020 22:33:38 -0400	[thread overview]
Message-ID: <20200316023411.1263-2-sashal@kernel.org> (raw)
In-Reply-To: <20200316023411.1263-1-sashal@kernel.org>

From: Vignesh Raghavendra <vigneshr@ti.com>

[ Upstream commit 32f2fc5dc3992b4b60cc6b1a6a31be605cc9c3a2 ]

dma_request_channel() can return -EPROBE_DEFER, if DMA driver is not
ready. Currently driver just falls back to PIO mode on probe deferral.
Fix this by requesting all required channels during probe and
propagating EPROBE_DEFER error code.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200204124816.16735-3-vigneshr@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-omap2-mcspi.c | 77 +++++++++++++++++------------------
 1 file changed, 38 insertions(+), 39 deletions(-)

diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 8e435da730996..cfb64e5a7d45d 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -986,20 +986,12 @@ static int omap2_mcspi_setup_transfer(struct spi_device *spi,
  * Note that we currently allow DMA only if we get a channel
  * for both rx and tx. Otherwise we'll do PIO for both rx and tx.
  */
-static int omap2_mcspi_request_dma(struct spi_device *spi)
+static int omap2_mcspi_request_dma(struct omap2_mcspi *mcspi,
+				   struct omap2_mcspi_dma *mcspi_dma)
 {
-	struct spi_master	*master = spi->master;
-	struct omap2_mcspi	*mcspi;
-	struct omap2_mcspi_dma	*mcspi_dma;
 	int ret = 0;
 
-	mcspi = spi_master_get_devdata(master);
-	mcspi_dma = mcspi->dma_channels + spi->chip_select;
-
-	init_completion(&mcspi_dma->dma_rx_completion);
-	init_completion(&mcspi_dma->dma_tx_completion);
-
-	mcspi_dma->dma_rx = dma_request_chan(&master->dev,
+	mcspi_dma->dma_rx = dma_request_chan(mcspi->dev,
 					     mcspi_dma->dma_rx_ch_name);
 	if (IS_ERR(mcspi_dma->dma_rx)) {
 		ret = PTR_ERR(mcspi_dma->dma_rx);
@@ -1007,7 +999,7 @@ static int omap2_mcspi_request_dma(struct spi_device *spi)
 		goto no_dma;
 	}
 
-	mcspi_dma->dma_tx = dma_request_chan(&master->dev,
+	mcspi_dma->dma_tx = dma_request_chan(mcspi->dev,
 					     mcspi_dma->dma_tx_ch_name);
 	if (IS_ERR(mcspi_dma->dma_tx)) {
 		ret = PTR_ERR(mcspi_dma->dma_tx);
@@ -1016,20 +1008,40 @@ static int omap2_mcspi_request_dma(struct spi_device *spi)
 		mcspi_dma->dma_rx = NULL;
 	}
 
+	init_completion(&mcspi_dma->dma_rx_completion);
+	init_completion(&mcspi_dma->dma_tx_completion);
+
 no_dma:
 	return ret;
 }
 
+static void omap2_mcspi_release_dma(struct spi_master *master)
+{
+	struct omap2_mcspi *mcspi = spi_master_get_devdata(master);
+	struct omap2_mcspi_dma	*mcspi_dma;
+	int i;
+
+	for (i = 0; i < master->num_chipselect; i++) {
+		mcspi_dma = &mcspi->dma_channels[i];
+
+		if (mcspi_dma->dma_rx) {
+			dma_release_channel(mcspi_dma->dma_rx);
+			mcspi_dma->dma_rx = NULL;
+		}
+		if (mcspi_dma->dma_tx) {
+			dma_release_channel(mcspi_dma->dma_tx);
+			mcspi_dma->dma_tx = NULL;
+		}
+	}
+}
+
 static int omap2_mcspi_setup(struct spi_device *spi)
 {
 	int			ret;
 	struct omap2_mcspi	*mcspi = spi_master_get_devdata(spi->master);
 	struct omap2_mcspi_regs	*ctx = &mcspi->ctx;
-	struct omap2_mcspi_dma	*mcspi_dma;
 	struct omap2_mcspi_cs	*cs = spi->controller_state;
 
-	mcspi_dma = &mcspi->dma_channels[spi->chip_select];
-
 	if (!cs) {
 		cs = kzalloc(sizeof *cs, GFP_KERNEL);
 		if (!cs)
@@ -1054,13 +1066,6 @@ static int omap2_mcspi_setup(struct spi_device *spi)
 		}
 	}
 
-	if (!mcspi_dma->dma_rx || !mcspi_dma->dma_tx) {
-		ret = omap2_mcspi_request_dma(spi);
-		if (ret)
-			dev_warn(&spi->dev, "not using DMA for McSPI (%d)\n",
-				 ret);
-	}
-
 	ret = pm_runtime_get_sync(mcspi->dev);
 	if (ret < 0) {
 		pm_runtime_put_noidle(mcspi->dev);
@@ -1077,12 +1082,8 @@ static int omap2_mcspi_setup(struct spi_device *spi)
 
 static void omap2_mcspi_cleanup(struct spi_device *spi)
 {
-	struct omap2_mcspi	*mcspi;
-	struct omap2_mcspi_dma	*mcspi_dma;
 	struct omap2_mcspi_cs	*cs;
 
-	mcspi = spi_master_get_devdata(spi->master);
-
 	if (spi->controller_state) {
 		/* Unlink controller state from context save list */
 		cs = spi->controller_state;
@@ -1091,19 +1092,6 @@ static void omap2_mcspi_cleanup(struct spi_device *spi)
 		kfree(cs);
 	}
 
-	if (spi->chip_select < spi->master->num_chipselect) {
-		mcspi_dma = &mcspi->dma_channels[spi->chip_select];
-
-		if (mcspi_dma->dma_rx) {
-			dma_release_channel(mcspi_dma->dma_rx);
-			mcspi_dma->dma_rx = NULL;
-		}
-		if (mcspi_dma->dma_tx) {
-			dma_release_channel(mcspi_dma->dma_tx);
-			mcspi_dma->dma_tx = NULL;
-		}
-	}
-
 	if (gpio_is_valid(spi->cs_gpio))
 		gpio_free(spi->cs_gpio);
 }
@@ -1314,6 +1302,9 @@ static bool omap2_mcspi_can_dma(struct spi_master *master,
 	if (spi_controller_is_slave(master))
 		return true;
 
+	master->dma_rx = mcspi_dma->dma_rx;
+	master->dma_tx = mcspi_dma->dma_tx;
+
 	return (xfer->len >= DMA_MIN_BYTES);
 }
 
@@ -1501,6 +1492,11 @@ static int omap2_mcspi_probe(struct platform_device *pdev)
 	for (i = 0; i < master->num_chipselect; i++) {
 		sprintf(mcspi->dma_channels[i].dma_rx_ch_name, "rx%d", i);
 		sprintf(mcspi->dma_channels[i].dma_tx_ch_name, "tx%d", i);
+
+		status = omap2_mcspi_request_dma(mcspi,
+						 &mcspi->dma_channels[i]);
+		if (status == -EPROBE_DEFER)
+			goto free_master;
 	}
 
 	status = platform_get_irq(pdev, 0);
@@ -1538,6 +1534,7 @@ static int omap2_mcspi_probe(struct platform_device *pdev)
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 free_master:
+	omap2_mcspi_release_dma(master);
 	spi_master_put(master);
 	return status;
 }
@@ -1547,6 +1544,8 @@ static int omap2_mcspi_remove(struct platform_device *pdev)
 	struct spi_master *master = platform_get_drvdata(pdev);
 	struct omap2_mcspi *mcspi = spi_master_get_devdata(master);
 
+	omap2_mcspi_release_dma(master);
+
 	pm_runtime_dont_use_autosuspend(mcspi->dev);
 	pm_runtime_put_sync(mcspi->dev);
 	pm_runtime_disable(&pdev->dev);
-- 
2.20.1

  reply	other threads:[~2020-03-16  2:33 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-16  2:33 [PATCH AUTOSEL 5.4 01/35] spi: spi-omap2-mcspi: Handle DMA size restriction on AM65x Sasha Levin
2020-03-16  2:33 ` Sasha Levin [this message]
2020-03-16  2:33 ` [PATCH AUTOSEL 5.4 09/35] spi: qup: call spi_qup_pm_resume_runtime before suspending Sasha Levin
2020-03-16  2:33 ` [PATCH AUTOSEL 5.4 14/35] spi: pxa2xx: Add CS control clock quirk Sasha Levin
2020-03-16  2:33 ` [PATCH AUTOSEL 5.4 15/35] spi/zynqmp: remove entry that causes a cs glitch Sasha Levin
     [not found] ` <20200316023411.1263-1-sashal-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2020-03-16  2:34   ` [PATCH AUTOSEL 5.4 26/35] spi: spi_register_controller(): free bus id on error paths Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200316023411.1263-2-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=broonie@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).