linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Florian Fainelli <f.fainelli@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Florian Fainelli <f.fainelli@gmail.com>,
	Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
	Ray Jui <rjui@broadcom.com>,
	Scott Branden <sbranden@broadcom.com>,
	bcm-kernel-feedback-list@broadcom.com (maintainer:BROADCOM
	BCM281XX/BCM11XXX/BCM216XX ARM ARCHITE...),
	linux-spi@vger.kernel.org (open list:SPI SUBSYSTEM),
	devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
	FLATTENED DEVICE TREE BINDINGS),
	linux-rpi-kernel@lists.infradead.org (moderated list:BROADCOM
	BCM2711/BCM2835 ARM ARCHITECTURE),
	linux-arm-kernel@lists.infradead.org (moderated list:BROADCOM
	BCM2711/BCM2835 ARM ARCHITECTURE),
	Martin Sperl <kernel@martin.sperl.org>,
	lukas@wunner.de
Subject: [PATCH 3/3] spi: bcm2835: Enable shared interrupt support
Date: Wed,  3 Jun 2020 20:46:55 -0700	[thread overview]
Message-ID: <20200604034655.15930-4-f.fainelli@gmail.com> (raw)
In-Reply-To: <20200604034655.15930-1-f.fainelli@gmail.com>

The SPI controller found in the BCM2711 and BCM7211 SoCs is instantiated
5 times, with all instances sharing the same interrupt line. We
specifically match the two compatible strings here to determine whether
it is necessary to request the interrupt with the IRQF_SHARED flag and
to use an appropriate interrupt handler capable of returning IRQ_NONE.

For the BCM2835 case which is deemed performance critical, there is no
overhead since a dedicated handler that does not assume sharing is used.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/spi/spi-bcm2835.c | 48 +++++++++++++++++++++++++++++++--------
 1 file changed, 38 insertions(+), 10 deletions(-)

diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c
index 237bd306c268..2e73ec70ee80 100644
--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -361,11 +361,10 @@ static void bcm2835_spi_reset_hw(struct spi_controller *ctlr)
 	bcm2835_wr(bs, BCM2835_SPI_DLEN, 0);
 }
 
-static irqreturn_t bcm2835_spi_interrupt(int irq, void *dev_id)
+static inline irqreturn_t bcm2835_spi_interrupt_common(struct spi_controller *ctlr,
+						       u32 cs)
 {
-	struct spi_controller *ctlr = dev_id;
 	struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr);
-	u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS);
 
 	/*
 	 * An interrupt is signaled either if DONE is set (TX FIFO empty)
@@ -394,6 +393,27 @@ static irqreturn_t bcm2835_spi_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static irqreturn_t bcm2835_spi_interrupt(int irq, void *dev_id)
+{
+	struct spi_controller *ctlr = dev_id;
+	struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr);
+	u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS);
+
+	return bcm2835_spi_interrupt_common(ctlr, cs);
+}
+
+static irqreturn_t bcm2835_spi_sh_interrupt(int irq, void *dev_id)
+{
+	struct spi_controller *ctlr = dev_id;
+	struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr);
+	u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS);
+
+	if (!(cs & BCM2835_SPI_CS_INTR))
+		return IRQ_NONE;
+
+	return bcm2835_spi_interrupt_common(ctlr, cs);
+}
+
 static int bcm2835_spi_transfer_one_irq(struct spi_controller *ctlr,
 					struct spi_device *spi,
 					struct spi_transfer *tfr,
@@ -1287,12 +1307,26 @@ static int bcm2835_spi_setup(struct spi_device *spi)
 	return 0;
 }
 
+static const struct of_device_id bcm2835_spi_match[] = {
+	{ .compatible = "brcm,bcm2835-spi", .data = &bcm2835_spi_interrupt },
+	{ .compatible = "brcm,bcm2711-spi", .data = &bcm2835_spi_sh_interrupt },
+	{ .compatible = "brcm,bcm7211-spi", .data = &bcm2835_spi_sh_interrupt },
+	{}
+};
+MODULE_DEVICE_TABLE(of, bcm2835_spi_match);
+
 static int bcm2835_spi_probe(struct platform_device *pdev)
 {
+	irqreturn_t (*bcm2835_spi_isr_func)(int, void *);
 	struct spi_controller *ctlr;
+	unsigned long flags = 0;
 	struct bcm2835_spi *bs;
 	int err;
 
+	bcm2835_spi_isr_func = of_device_get_match_data(&pdev->dev);
+	if (bcm2835_spi_isr_func == &bcm2835_spi_sh_interrupt)
+		flags = IRQF_SHARED;
+
 	ctlr = spi_alloc_master(&pdev->dev, ALIGN(sizeof(*bs),
 						  dma_get_cache_alignment()));
 	if (!ctlr)
@@ -1344,7 +1378,7 @@ static int bcm2835_spi_probe(struct platform_device *pdev)
 	bcm2835_wr(bs, BCM2835_SPI_CS,
 		   BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX);
 
-	err = devm_request_irq(&pdev->dev, bs->irq, bcm2835_spi_interrupt, 0,
+	err = devm_request_irq(&pdev->dev, bs->irq, bcm2835_spi_isr_func, flags,
 			       dev_name(&pdev->dev), ctlr);
 	if (err) {
 		dev_err(&pdev->dev, "could not request IRQ: %d\n", err);
@@ -1400,12 +1434,6 @@ static void bcm2835_spi_shutdown(struct platform_device *pdev)
 		dev_err(&pdev->dev, "failed to shutdown\n");
 }
 
-static const struct of_device_id bcm2835_spi_match[] = {
-	{ .compatible = "brcm,bcm2835-spi", },
-	{}
-};
-MODULE_DEVICE_TABLE(of, bcm2835_spi_match);
-
 static struct platform_driver bcm2835_spi_driver = {
 	.driver		= {
 		.name		= DRV_NAME,
-- 
2.17.1


  parent reply	other threads:[~2020-06-04  3:47 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-04  3:46 [PATCH 0/3] spi: bcm2835: Enable shared interrupt support Florian Fainelli
2020-06-04  3:46 ` [PATCH 1/3] dt-bindings: spi: Document bcm2711 and bcm7211 SPI compatible Florian Fainelli
2020-06-04  4:23   ` Lukas Wunner
2020-06-04  3:46 ` [PATCH 2/3] ARM: dts: bcm2711: Update SPI nodes compatible strings Florian Fainelli
2020-06-04  4:20   ` Lukas Wunner
2020-06-04 11:13     ` Mark Brown
2020-06-04 11:21       ` Lukas Wunner
2020-06-04 14:05         ` Mark Brown
2020-06-04 16:40     ` Florian Fainelli
2020-06-04 16:54       ` Stefan Wahren
2020-06-04 16:56         ` Florian Fainelli
2020-06-04 16:46   ` Stefan Wahren
2020-06-04  3:46 ` Florian Fainelli [this message]
2020-06-04  4:17   ` [PATCH 3/3] spi: bcm2835: Enable shared interrupt support Lukas Wunner
2020-06-15 17:25     ` Rob Herring
2020-06-04 12:32   ` Mark Brown
2020-06-04 16:05     ` Florian Fainelli
2020-06-04 20:24       ` Florian Fainelli
2020-06-05 11:35         ` Lukas Wunner
2020-06-05 10:28       ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200604034655.15930-4-f.fainelli@gmail.com \
    --to=f.fainelli@gmail.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@martin.sperl.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=lukas@wunner.de \
    --cc=nsaenzjulienne@suse.de \
    --cc=rjui@broadcom.com \
    --cc=robh+dt@kernel.org \
    --cc=sbranden@broadcom.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).