[PATCH AUTOSEL 5.7 018/274] spi: spi-mem: Fix Dual/Quad modes on Octal-capable devices

[PATCH AUTOSEL 5.7 018/274] spi: spi-mem: Fix Dual/Quad modes on Octal-capable devices

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 80300a7d5f2d7178335652f41d2e55ba898b4ec1 ]

Currently buswidths 2 and 4 are rejected for a device that advertises
Octal capabilities.  Allow these buswidths, just like is done for
buswidth 2 and Quad-capable devices.

Fixes: b12a084c8729ef42 ("spi: spi-mem: add support for octal mode I/O data transfer")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200416101418.14379-1-geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-mem.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
index adaa0c49f966..9a86cc27fcc0 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -108,15 +108,17 @@ static int spi_check_buswidth_req(struct spi_mem *mem, u8 buswidth, bool tx)
 		return 0;
 
 	case 2:
-		if ((tx && (mode & (SPI_TX_DUAL | SPI_TX_QUAD))) ||
-		    (!tx && (mode & (SPI_RX_DUAL | SPI_RX_QUAD))))
+		if ((tx &&
+		     (mode & (SPI_TX_DUAL | SPI_TX_QUAD | SPI_TX_OCTAL))) ||
+		    (!tx &&
+		     (mode & (SPI_RX_DUAL | SPI_RX_QUAD | SPI_RX_OCTAL))))
 			return 0;
 
 		break;
 
 	case 4:
-		if ((tx && (mode & SPI_TX_QUAD)) ||
-		    (!tx && (mode & SPI_RX_QUAD)))
+		if ((tx && (mode & (SPI_TX_QUAD | SPI_TX_OCTAL))) ||
+		    (!tx && (mode & (SPI_RX_QUAD | SPI_RX_OCTAL))))
 			return 0;
 
 		break;
-- 
2.25.1

[PATCH AUTOSEL 5.7 025/274] spi: pxa2xx: Apply CS clk quirk to BXT

[Sasha Levin]

From: Evan Green <evgreen@chromium.org>

[ Upstream commit 6eefaee4f2d366a389da0eb95e524ba82bf358c4 ]

With a couple allies at Intel, and much badgering, I got confirmation
from Intel that at least BXT suffers from the same SPI chip-select
issue as Cannonlake (and beyond). The issue being that after going
through runtime suspend/resume, toggling the chip-select line without
also sending data does nothing.

Add the quirk to BXT to briefly toggle dynamic clock gating off and
on, forcing the fabric to wake up enough to notice the CS register
change.

Signed-off-by: Evan Green <evgreen@chromium.org>
Cc: Shobhit Srivastava <shobhit.srivastava@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200427163238.1.Ib1faaabe236e37ea73be9b8dcc6aa034cb3c8804@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-pxa2xx.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index 73d2a65d0b6e..20dcbd35611a 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -150,6 +150,7 @@ static const struct lpss_config lpss_platforms[] = {
 		.tx_threshold_hi = 48,
 		.cs_sel_shift = 8,
 		.cs_sel_mask = 3 << 8,
+		.cs_clk_stays_gated = true,
 	},
 	{	/* LPSS_CNL_SSP */
 		.offset = 0x200,
-- 
2.25.1

[PATCH AUTOSEL 5.7 036/274] spi: dw: Zero DMA Tx and Rx configurations on stack

[Sasha Levin]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit 3cb97e223d277f84171cc4ccecab31e08b2ee7b5 ]

Some DMA controller drivers do not tolerate non-zero values in
the DMA configuration structures. Zero them to avoid issues with
such DMA controller drivers. Even despite above this is a good
practice per se.

Fixes: 7063c0d942a1 ("spi/dw_spi: add DMA support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Feng Tang <feng.tang@intel.com>
Cc: Feng Tang <feng.tang@intel.com>
Link: https://lore.kernel.org/r/20200506153025.21441-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-dw-mid.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c
index 0d86c37e0aeb..1058b8a6c8a0 100644
--- a/drivers/spi/spi-dw-mid.c
+++ b/drivers/spi/spi-dw-mid.c
@@ -147,6 +147,7 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_tx(struct dw_spi *dws,
 	if (!xfer->tx_buf)
 		return NULL;
 
+	memset(&txconf, 0, sizeof(txconf));
 	txconf.direction = DMA_MEM_TO_DEV;
 	txconf.dst_addr = dws->dma_addr;
 	txconf.dst_maxburst = 16;
@@ -193,6 +194,7 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws,
 	if (!xfer->rx_buf)
 		return NULL;
 
+	memset(&rxconf, 0, sizeof(rxconf));
 	rxconf.direction = DMA_DEV_TO_MEM;
 	rxconf.src_addr = dws->dma_addr;
 	rxconf.src_maxburst = 16;
-- 
2.25.1

[PATCH AUTOSEL 5.7 062/274] spi: dw: Enable interrupts in accordance with DMA xfer mode

[Sasha Levin]

From: Serge Semin <Sergey.Semin@baikalelectronics.ru>

[ Upstream commit 43dba9f3f98c2b184a19f856f06fe22817bfd9e0 ]

It's pointless to track the Tx overrun interrupts if Rx-only SPI
transfer is issued. Similarly there is no need in handling the Rx
overrun/underrun interrupts if Tx-only SPI transfer is executed.
So lets unmask the interrupts only if corresponding SPI
transactions are implied.

Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20200522000806.7381-3-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-dw-mid.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c
index 1058b8a6c8a0..e6c045ecffba 100644
--- a/drivers/spi/spi-dw-mid.c
+++ b/drivers/spi/spi-dw-mid.c
@@ -220,19 +220,23 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws,
 
 static int mid_spi_dma_setup(struct dw_spi *dws, struct spi_transfer *xfer)
 {
-	u16 dma_ctrl = 0;
+	u16 imr = 0, dma_ctrl = 0;
 
 	dw_writel(dws, DW_SPI_DMARDLR, 0xf);
 	dw_writel(dws, DW_SPI_DMATDLR, 0x10);
 
-	if (xfer->tx_buf)
+	if (xfer->tx_buf) {
 		dma_ctrl |= SPI_DMA_TDMAE;
-	if (xfer->rx_buf)
+		imr |= SPI_INT_TXOI;
+	}
+	if (xfer->rx_buf) {
 		dma_ctrl |= SPI_DMA_RDMAE;
+		imr |= SPI_INT_RXUI | SPI_INT_RXOI;
+	}
 	dw_writel(dws, DW_SPI_DMACR, dma_ctrl);
 
 	/* Set the interrupt mask */
-	spi_umask_intr(dws, SPI_INT_TXOI | SPI_INT_RXUI | SPI_INT_RXOI);
+	spi_umask_intr(dws, imr);
 
 	dws->transfer_handler = dma_transfer;
 
-- 
2.25.1

[PATCH AUTOSEL 5.7 069/274] spi: mux: repair mux usage

[Sasha Levin]

From: Peter Rosin <peda@axentia.se>

[ Upstream commit a2b02e4623fb127fa65a13e4ac5aa56e4ae16291 ]

It is not valid to cache/short out selection of the mux.

mux_control_select() only locks the mux until mux_control_deselect()
is called. mux_control_deselect() may put the mux in some low power
state or some other user of the mux might select it for other purposes.
These things are probably not happening in the original setting where
this driver was developed, but it is said to be a generic SPI mux.

Also, the mux framework will short out the actual low level muxing
operation when/if that is possible.

Fixes: e9e40543ad5b ("spi: Add generic SPI multiplexer")
Signed-off-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20200525104352.26807-1-peda@axentia.se
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-mux.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spi-mux.c b/drivers/spi/spi-mux.c
index 4f94c9127fc1..cc9ef371db14 100644
--- a/drivers/spi/spi-mux.c
+++ b/drivers/spi/spi-mux.c
@@ -51,6 +51,10 @@ static int spi_mux_select(struct spi_device *spi)
 	struct spi_mux_priv *priv = spi_controller_get_devdata(spi->controller);
 	int ret;
 
+	ret = mux_control_select(priv->mux, spi->chip_select);
+	if (ret)
+		return ret;
+
 	if (priv->current_cs == spi->chip_select)
 		return 0;
 
@@ -62,10 +66,6 @@ static int spi_mux_select(struct spi_device *spi)
 	priv->spi->mode = spi->mode;
 	priv->spi->bits_per_word = spi->bits_per_word;
 
-	ret = mux_control_select(priv->mux, spi->chip_select);
-	if (ret)
-		return ret;
-
 	priv->current_cs = spi->chip_select;
 
 	return 0;
-- 
2.25.1

[PATCH AUTOSEL 5.7 080/274] spi: dw: Fix Rx-only DMA transfers

[Sasha Levin]

From: Serge Semin <Sergey.Semin@baikalelectronics.ru>

[ Upstream commit 46164fde6b7890e7a3982d54549947c8394c0192 ]

Tx-only DMA transfers are working perfectly fine since in this case
the code just ignores the Rx FIFO overflow interrupts. But it turns
out the SPI Rx-only transfers are broken since nothing pushing any
data to the shift registers, so the Rx FIFO is left empty and the
SPI core subsystems just returns a timeout error. Since DW DMAC
driver doesn't support something like cyclic write operations of
a single byte to a device register, the only way to support the
Rx-only SPI transfers is to fake it by using a dummy Tx-buffer.
This is what we intend to fix in this commit by setting the
SPI_CONTROLLER_MUST_TX flag for DMA-capable platform.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20200529131205.31838-9-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-dw.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index 31e3f866d11a..e8f275c850ce 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -523,6 +523,7 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws)
 			dws->dma_inited = 0;
 		} else {
 			master->can_dma = dws->dma_ops->can_dma;
+			master->flags |= SPI_CONTROLLER_MUST_TX;
 		}
 	}
 
-- 
2.25.1

[PATCH AUTOSEL 5.7 098/274] spi: Respect DataBitLength field of SpiSerialBusV2() ACPI resource

[Sasha Levin]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit 0dadde344d965566589cd82797893d5aa06557a3 ]

By unknown reason the commit 64bee4d28c9e
  ("spi / ACPI: add ACPI enumeration support")
missed the DataBitLength property to encounter when parse SPI slave
device data from ACPI.

Fill the gap here.

Fixes: 64bee4d28c9e ("spi / ACPI: add ACPI enumeration support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200413180406.1826-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index c92c89467e7e..e0e27fe06878 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -2111,6 +2111,7 @@ static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
 			}
 
 			lookup->max_speed_hz = sb->connection_speed;
+			lookup->bits_per_word = sb->data_bit_length;
 
 			if (sb->clock_phase == ACPI_SPI_SECOND_PHASE)
 				lookup->mode |= SPI_CPHA;
-- 
2.25.1

[PATCH AUTOSEL 5.7 255/274] spi: dw: Return any value retrieved from the dma_transfer callback

[Sasha Levin]

From: Serge Semin <Sergey.Semin@baikalelectronics.ru>

[ Upstream commit f0410bbf7d0fb80149e3b17d11d31f5b5197873e ]

DW APB SSI DMA-part of the driver may need to perform the requested
SPI-transfer synchronously. In that case the dma_transfer() callback
will return 0 as a marker of the SPI transfer being finished so the
SPI core doesn't need to wait and may proceed with the SPI message
trasnfers pumping procedure. This will be needed to fix the problem
when DMA transactions are finished, but there is still data left in
the SPI Tx/Rx FIFOs being sent/received. But for now make dma_transfer
to return 1 as the normal dw_spi_transfer_one() method.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20200529131205.31838-3-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-dw-mid.c | 2 +-
 drivers/spi/spi-dw.c     | 7 ++-----
 2 files changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c
index e6c045ecffba..23cebdeb67e2 100644
--- a/drivers/spi/spi-dw-mid.c
+++ b/drivers/spi/spi-dw-mid.c
@@ -266,7 +266,7 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, struct spi_transfer *xfer)
 		dma_async_issue_pending(dws->txchan);
 	}
 
-	return 0;
+	return 1;
 }
 
 static void mid_spi_dma_stop(struct dw_spi *dws)
diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index e8f275c850ce..594a1ac09d9c 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -373,11 +373,8 @@ static int dw_spi_transfer_one(struct spi_controller *master,
 
 	spi_enable_chip(dws, 1);
 
-	if (dws->dma_mapped) {
-		ret = dws->dma_ops->dma_transfer(dws, transfer);
-		if (ret < 0)
-			return ret;
-	}
+	if (dws->dma_mapped)
+		return dws->dma_ops->dma_transfer(dws, transfer);
 
 	if (chip->poll_mode)
 		return poll_transfer(dws);
-- 
2.25.1

[PATCH AUTOSEL 5.7 257/274] spi: spi-fsl-dspi: fix native data copy

[Sasha Levin]

From: Angelo Dureghello <angelo.dureghello@timesys.com>

[ Upstream commit 263b81dc6c932c8bc550d5e7bfc178d2b3fc491e ]

ColdFire is a big-endian cpu with a big-endian dspi hw module,
so, it uses native access, but memcpy breaks the endianness.

So, if i understand properly, by native copy we would mean
be(cpu)->be(dspi) or le(cpu)->le(dspi) accesses, so my fix
shouldn't break anything, but i couldn't test it on LS family,
so every test is really appreciated.

Fixes: 53fadb4d90c7 ("spi: spi-fsl-dspi: Simplify bytes_per_word gymnastics")
Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200529195756.184677-1-angelo.dureghello@timesys.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-fsl-dspi.c | 24 ++++++++++++++++++++++--
 1 file changed, 22 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index 50e41f66a2d7..2e9f9adc5900 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -246,13 +246,33 @@ struct fsl_dspi {
 
 static void dspi_native_host_to_dev(struct fsl_dspi *dspi, u32 *txdata)
 {
-	memcpy(txdata, dspi->tx, dspi->oper_word_size);
+	switch (dspi->oper_word_size) {
+	case 1:
+		*txdata = *(u8 *)dspi->tx;
+		break;
+	case 2:
+		*txdata = *(u16 *)dspi->tx;
+		break;
+	case 4:
+		*txdata = *(u32 *)dspi->tx;
+		break;
+	}
 	dspi->tx += dspi->oper_word_size;
 }
 
 static void dspi_native_dev_to_host(struct fsl_dspi *dspi, u32 rxdata)
 {
-	memcpy(dspi->rx, &rxdata, dspi->oper_word_size);
+	switch (dspi->oper_word_size) {
+	case 1:
+		*(u8 *)dspi->rx = rxdata;
+		break;
+	case 2:
+		*(u16 *)dspi->rx = rxdata;
+		break;
+	case 4:
+		*(u32 *)dspi->rx = rxdata;
+		break;
+	}
 	dspi->rx += dspi->oper_word_size;
 }
 
-- 
2.25.1