From: Aswath Govindraju <a-govindraju@ti.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Aswath Govindraju <a-govindraju@ti.com>,
Sekhar Nori <nsekhar@ti.com>, Mark Brown <broonie@kernel.org>,
Vignesh R <vigneshr@ti.com>, <linux-spi@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH] Revert "spi: omap2-mcspi: Switch to readl_poll_timeout()"
Date: Thu, 10 Sep 2020 17:56:24 +0530 [thread overview]
Message-ID: <20200910122624.8769-1-a-govindraju@ti.com> (raw)
This reverts commit 13d515c796adc49a49b0cd2212ccd7f43a37fc5a.
The amount of time spent polling for the MCSPI_CHSTAT bits to be set on
AM335x-icev2 platform is less than 1us (about 0.6us) in most cases, with
or without using DMA. So, in most cases the function need not sleep.
Also, setting the sleep_usecs to zero would not be optimal here because
ktime_add_us() used in readl_poll_timeout() is slower compared to the
direct addition used after the revert. So, it is sub-optimal to use
readl_poll_timeout in this case.
When DMA is not enabled, this revert results in an increase of about 27%
in throughput and decrease of about 20% in CPU usage. However, the CPU
usage and throughput are almost the same when used with DMA.
Therefore, fix this by reverting the commit which switched to using
readl_poll_timeout().
Fixes: 13d515c796ad ("spi: omap2-mcspi: Switch to readl_poll_timeout()")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
---
drivers/spi/spi-omap2-mcspi.c | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 1c9478e6e5d9..d4c9510af393 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -24,7 +24,6 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/gcd.h>
-#include <linux/iopoll.h>
#include <linux/spi/spi.h>
@@ -348,9 +347,19 @@ static void omap2_mcspi_set_fifo(const struct spi_device *spi,
static int mcspi_wait_for_reg_bit(void __iomem *reg, unsigned long bit)
{
- u32 val;
-
- return readl_poll_timeout(reg, val, val & bit, 1, MSEC_PER_SEC);
+ unsigned long timeout;
+
+ timeout = jiffies + msecs_to_jiffies(1000);
+ while (!(readl_relaxed(reg) & bit)) {
+ if (time_after(jiffies, timeout)) {
+ if (!(readl_relaxed(reg) & bit))
+ return -ETIMEDOUT;
+ else
+ return 0;
+ }
+ cpu_relax();
+ }
+ return 0;
}
static int mcspi_wait_for_completion(struct omap2_mcspi *mcspi,
base-commit: dff9f829e5b0181d4ed9d35aa62d695292399b54
--
2.17.1
next reply other threads:[~2020-09-10 12:31 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-10 12:26 Aswath Govindraju [this message]
2020-09-21 18:56 ` [PATCH] Revert "spi: omap2-mcspi: Switch to readl_poll_timeout()" Mark Brown
2020-09-21 19:00 ` Mark Brown
2020-09-22 0:06 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200910122624.8769-1-a-govindraju@ti.com \
--to=a-govindraju@ti.com \
--cc=broonie@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=nsekhar@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).