[PATCH AUTOSEL 5.13 03/24] spi: spi-mux: Add module info needed for autoloading

[PATCH AUTOSEL 5.13 03/24] spi: spi-mux: Add module info needed for autoloading

[Sasha Levin]

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit 1d5ccab95f06675a269f4cb223a1e3f6d1ebef42 ]

With the spi device table udev can autoload the spi-mux module in
the presence of an spi-mux device.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210721095321.2165453-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-mux.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/spi/spi-mux.c b/drivers/spi/spi-mux.c
index 37dfc6e82804..9708b7827ff7 100644
--- a/drivers/spi/spi-mux.c
+++ b/drivers/spi/spi-mux.c
@@ -167,10 +167,17 @@ static int spi_mux_probe(struct spi_device *spi)
 	return ret;
 }
 
+static const struct spi_device_id spi_mux_id[] = {
+	{ "spi-mux" },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, spi_mux_id);
+
 static const struct of_device_id spi_mux_of_match[] = {
 	{ .compatible = "spi-mux" },
 	{ }
 };
+MODULE_DEVICE_TABLE(of, spi_mux_of_match);
 
 static struct spi_driver spi_mux_driver = {
 	.probe  = spi_mux_probe,
@@ -178,6 +185,7 @@ static struct spi_driver spi_mux_driver = {
 		.name   = "spi-mux",
 		.of_match_table = spi_mux_of_match,
 	},
+	.id_table = spi_mux_id,
 };
 
 module_spi_driver(spi_mux_driver);
-- 
2.30.2

[PATCH AUTOSEL 5.13 21/24] spi: cadence-quadspi: Fix check condition for DTR ops

[Sasha Levin]

From: Apurva Nandan <a-nandan@ti.com>

[ Upstream commit 0395be967b067d99494113d78470574e86a02ed4 ]

buswidth and dtr fields in spi_mem_op are only valid when the
corresponding spi_mem_op phase has a non-zero length. For example,
SPI NAND core doesn't set buswidth when using SPI_MEM_OP_NO_ADDR
phase.

Fix the dtr checks in set_protocol() and suppports_mem_op() to
ignore empty spi_mem_op phases, as checking for dtr field in
empty phase will result in false negatives.

Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Link: https://lore.kernel.org/r/20210716232504.182-3-a-nandan@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-cadence-quadspi.c | 21 ++++++++++++++++++---
 1 file changed, 18 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c
index d62d69dd72b9..73d4f0a1558d 100644
--- a/drivers/spi/spi-cadence-quadspi.c
+++ b/drivers/spi/spi-cadence-quadspi.c
@@ -325,7 +325,15 @@ static int cqspi_set_protocol(struct cqspi_flash_pdata *f_pdata,
 	f_pdata->inst_width = CQSPI_INST_TYPE_SINGLE;
 	f_pdata->addr_width = CQSPI_INST_TYPE_SINGLE;
 	f_pdata->data_width = CQSPI_INST_TYPE_SINGLE;
-	f_pdata->dtr = op->data.dtr && op->cmd.dtr && op->addr.dtr;
+
+	/*
+	 * For an op to be DTR, cmd phase along with every other non-empty
+	 * phase should have dtr field set to 1. If an op phase has zero
+	 * nbytes, ignore its dtr field; otherwise, check its dtr field.
+	 */
+	f_pdata->dtr = op->cmd.dtr &&
+		       (!op->addr.nbytes || op->addr.dtr) &&
+		       (!op->data.nbytes || op->data.dtr);
 
 	switch (op->data.buswidth) {
 	case 0:
@@ -1227,8 +1235,15 @@ static bool cqspi_supports_mem_op(struct spi_mem *mem,
 {
 	bool all_true, all_false;
 
-	all_true = op->cmd.dtr && op->addr.dtr && op->dummy.dtr &&
-		   op->data.dtr;
+	/*
+	 * op->dummy.dtr is required for converting nbytes into ncycles.
+	 * Also, don't check the dtr field of the op phase having zero nbytes.
+	 */
+	all_true = op->cmd.dtr &&
+		   (!op->addr.nbytes || op->addr.dtr) &&
+		   (!op->dummy.nbytes || op->dummy.dtr) &&
+		   (!op->data.nbytes || op->data.dtr);
+
 	all_false = !op->cmd.dtr && !op->addr.dtr && !op->dummy.dtr &&
 		    !op->data.dtr;
 
-- 
2.30.2