From: Lucas Tanure <tanureal@opensource.cirrus.com>
To: Mark Brown <broonie@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
"Rafael J . Wysocki" <rafael@kernel.org>,
Sanjay R Mehta <sanju.mehta@amd.com>,
Nehal Bakulchandra Shah <Nehal-Bakulchandra.shah@amd.com>
Cc: <linux-kernel@vger.kernel.org>, <linux-spi@vger.kernel.org>,
<patches@opensource.cirrus.com>,
Lucas Tanure <tanureal@opensource.cirrus.com>
Subject: [PATCH 09/10] spi: amd: Add support for latest platform
Date: Wed, 8 Sep 2021 12:34:50 +0100 [thread overview]
Message-ID: <20210908113450.788452-10-tanureal@opensource.cirrus.com> (raw)
In-Reply-To: <20210908113450.788452-1-tanureal@opensource.cirrus.com>
From: Nehal Bakulchandra Shah <Nehal-Bakulchandra.shah@amd.com>
Add support for AMDI0062 controller
Signed-off-by: Nehal Bakulchandra Shah <Nehal-Bakulchandra.shah@amd.com>
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
---
drivers/spi/spi-amd.c | 128 ++++++++++++++++++++++++++++++++++--------
1 file changed, 104 insertions(+), 24 deletions(-)
diff --git a/drivers/spi/spi-amd.c b/drivers/spi/spi-amd.c
index 0face11740ea..788a5c42d811 100644
--- a/drivers/spi/spi-amd.c
+++ b/drivers/spi/spi-amd.c
@@ -2,9 +2,10 @@
//
// AMD SPI controller driver
//
-// Copyright (c) 2020, Advanced Micro Devices, Inc.
+// Copyright (c) 2020-2021, Advanced Micro Devices, Inc.
//
// Authors: Sanjay R Mehta <sanju.mehta@amd.com>
+// Nehal Bakulchandra Shah <nehal-bakulchandra.shah@amd.com>
// Lucas Tanure <tanureal@opensource.cirrus.com>
#include <linux/acpi.h>
@@ -14,33 +15,48 @@
#include <linux/delay.h>
#include <linux/spi/spi.h>
-#define AMD_SPI_CTRL0_REG 0x00
-#define AMD_SPI_EXEC_CMD BIT(16)
-#define AMD_SPI_FIFO_CLEAR BIT(20)
-#define AMD_SPI_BUSY BIT(31)
+#define AMD_SPI_CTRL0_REG 0x00
+#define AMD_SPI_EXEC_CMD BIT(16)
+#define AMD_SPI_FIFO_CLEAR BIT(20)
+#define AMD_SPI_BUSY BIT(31)
+#define AMD_SPI_ENABLE_REG 0x20
-#define AMD_SPI_OPCODE_MASK 0xFF
+#define AMD_SPI_DUMMY_CYCL_REG 0x32
+#define AMD_SPI_OPCODE_REG 0x45
+#define AMD_SPI_CMD_TRIGGER_REG 0x47
+#define AMD_SPI_TRIGGER_CMD BIT(7)
+#define AMD_SPI_OPCODE_MASK 0xFF
-#define AMD_SPI_ALT_CS_REG 0x1D
-#define AMD_SPI_ALT_CS_MASK 0x3
+#define AMD_SPI_ALT_CS_REG 0x1D
+#define AMD_SPI_ALT_CS_MASK GENMASK(1, 0)
-#define AMD_SPI_FIFO_BASE 0x80
-#define AMD_SPI_TX_COUNT_REG 0x48
-#define AMD_SPI_RX_COUNT_REG 0x4B
-#define AMD_SPI_STATUS_REG 0x4C
+#define AMD_SPI_FIFO_BASE 0x80
+#define AMD_SPI_TX_COUNT_REG 0x48
+#define AMD_SPI_RX_COUNT_REG 0x4B
+#define AMD_SPI_STATUS_REG 0x4C
-#define AMD_SPI_FIFO_SIZE 70
-#define AMD_SPI_MEM_SIZE 200
+#define AMD_SPI_FIFO_SIZE 70
+#define AMD_SPI_MEM_SIZE 200
/* M_CMD OP codes for SPI */
-#define AMD_SPI_XFER_TX 1
-#define AMD_SPI_XFER_RX 2
+#define AMD_SPI_XFER_TX 1
+#define AMD_SPI_XFER_RX 2
struct amd_spi {
void __iomem *io_remap_addr;
unsigned long io_base_addr;
u32 rom_addr;
struct list_head rbuf_head;
+ const struct amd_spi_devtype_data *devtype_data;
+ struct spi_device *spi_dev;
+ struct spi_master *master;
+};
+
+struct amd_spi_devtype_data {
+ u8 version;
+ int (*exec_op)(struct amd_spi *amd_spi);
+ void (*set_op)(struct amd_spi *amd_spi, u8 cmd_opcode);
+ int (*busy_wait)(struct amd_spi *amd_spi);
};
struct amd_spi_read_buffer {
@@ -90,16 +106,26 @@ static void amd_spi_select_chip(struct amd_spi *amd_spi, u8 cs)
amd_spi_setclear_reg8(amd_spi, AMD_SPI_ALT_CS_REG, cs, AMD_SPI_ALT_CS_MASK);
}
+static inline void amd_spi_clear_chip(struct amd_spi *amd_spi, u8 chip_select)
+{
+ amd_spi_writereg8(amd_spi, AMD_SPI_ALT_CS_REG, chip_select & ~AMD_SPI_ALT_CS_MASK);
+}
+
static void amd_spi_clear_fifo_ptr(struct amd_spi *amd_spi)
{
amd_spi_setclear_reg32(amd_spi, AMD_SPI_CTRL0_REG, AMD_SPI_FIFO_CLEAR, AMD_SPI_FIFO_CLEAR);
}
-static void amd_spi_set_opcode(struct amd_spi *amd_spi, u8 cmd_opcode)
+static void amd_spi_set_opcode_v1(struct amd_spi *amd_spi, u8 cmd_opcode)
{
amd_spi_setclear_reg32(amd_spi, AMD_SPI_CTRL0_REG, cmd_opcode, AMD_SPI_OPCODE_MASK);
}
+static void amd_spi_set_opcode_v2(struct amd_spi *amd_spi, u8 cmd_opcode)
+{
+ amd_spi_writereg8(amd_spi, AMD_SPI_OPCODE_REG, cmd_opcode);
+}
+
static inline void amd_spi_set_rx_count(struct amd_spi *amd_spi, u8 rx_count)
{
amd_spi_setclear_reg8(amd_spi, AMD_SPI_RX_COUNT_REG, rx_count, 0xff);
@@ -110,7 +136,7 @@ static inline void amd_spi_set_tx_count(struct amd_spi *amd_spi, u8 tx_count)
amd_spi_setclear_reg8(amd_spi, AMD_SPI_TX_COUNT_REG, tx_count, 0xff);
}
-static int amd_spi_busy_wait(struct amd_spi *amd_spi)
+static int amd_spi_busy_wait_v1(struct amd_spi *amd_spi)
{
int timeout = 100000;
@@ -124,11 +150,11 @@ static int amd_spi_busy_wait(struct amd_spi *amd_spi)
return 0;
}
-static int amd_spi_execute_opcode(struct amd_spi *amd_spi)
+static int amd_spi_execute_opcode_v1(struct amd_spi *amd_spi)
{
int ret;
- ret = amd_spi_busy_wait(amd_spi);
+ ret = amd_spi_busy_wait_v1(amd_spi);
if (ret)
return ret;
@@ -138,6 +164,33 @@ static int amd_spi_execute_opcode(struct amd_spi *amd_spi)
return 0;
}
+static int amd_spi_busy_wait_v2(struct amd_spi *amd_spi)
+{
+ int timeout = 100000;
+
+ while (amd_spi_readreg32(amd_spi, AMD_SPI_STATUS_REG) & AMD_SPI_BUSY) {
+ usleep_range(10, 20);
+ if (timeout-- < 0)
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static int amd_spi_execute_opcode_v2(struct amd_spi *amd_spi)
+{
+ int ret;
+
+ ret = amd_spi_busy_wait_v2(amd_spi);
+ if (ret)
+ return ret;
+
+ amd_spi_setclear_reg8(amd_spi, AMD_SPI_CMD_TRIGGER_REG, AMD_SPI_TRIGGER_CMD,
+ AMD_SPI_TRIGGER_CMD);
+
+ return 0;
+}
+
static int amd_spi_master_setup(struct spi_device *spi)
{
struct amd_spi *amd_spi = spi_master_get_devdata(spi->master);
@@ -159,20 +212,21 @@ static void amd_spi_clear_list(struct amd_spi *amd_spi)
static int amd_spi_transfer(struct amd_spi *amd_spi, u8 opcode, u8 tx_len, u8 rx_len, u8 fifo_pos)
{
+ const struct amd_spi_devtype_data *priv = amd_spi->devtype_data;
struct amd_spi_read_buffer *rbuf;
struct list_head *p;
int ret, i;
- amd_spi_set_opcode(amd_spi, opcode);
+ priv->set_op(amd_spi, opcode);
amd_spi_set_tx_count(amd_spi, tx_len);
amd_spi_set_rx_count(amd_spi, rx_len);
- ret = amd_spi_execute_opcode(amd_spi);
+ ret = priv->exec_op(amd_spi);
if (ret)
return ret;
if (!list_empty(&amd_spi->rbuf_head)) {
- ret = amd_spi_busy_wait(amd_spi);
+ ret = priv->busy_wait(amd_spi);
if (ret)
return ret;
list_for_each(p, &amd_spi->rbuf_head) {
@@ -262,6 +316,9 @@ static int amd_spi_transfer_one_message(struct spi_controller *ctrl, struct spi_
msg->status = ret;
spi_finalize_current_message(ctrl);
+ if (amd_spi->devtype_data->version)
+ amd_spi_clear_chip(amd_spi, msg->spi->chip_select);
+
return ret;
}
@@ -293,6 +350,12 @@ static int amd_spi_probe(struct platform_device *pdev)
}
dev_dbg(dev, "io_remap_address: %p\n", amd_spi->io_remap_addr);
+ amd_spi->devtype_data = device_get_match_data(dev);
+ if (!amd_spi->devtype_data) {
+ err = -ENODEV;
+ goto err_free_master;
+ }
+
/* Initialize the spi_master fields */
master->bus_num = 0;
master->num_chipselect = 4;
@@ -320,9 +383,25 @@ static int amd_spi_probe(struct platform_device *pdev)
return err;
}
+static const struct amd_spi_devtype_data spi_v1 = {
+ .exec_op = amd_spi_execute_opcode_v1,
+ .set_op = amd_spi_set_opcode_v1,
+ .busy_wait = amd_spi_busy_wait_v1,
+};
+
+static const struct amd_spi_devtype_data spi_v2 = {
+ .version = 1,
+ .exec_op = amd_spi_execute_opcode_v2,
+ .set_op = amd_spi_set_opcode_v2,
+ .busy_wait = amd_spi_busy_wait_v2,
+};
+
#ifdef CONFIG_ACPI
static const struct acpi_device_id spi_acpi_match[] = {
- { "AMDI0061", 0 },
+ { "AMDI0061",
+ .driver_data = (kernel_ulong_t)&spi_v1 },
+ { "AMDI0062",
+ .driver_data = (kernel_ulong_t)&spi_v2 },
{},
};
MODULE_DEVICE_TABLE(acpi, spi_acpi_match);
@@ -340,4 +419,5 @@ module_platform_driver(amd_spi_driver);
MODULE_LICENSE("Dual BSD/GPL");
MODULE_AUTHOR("Sanjay Mehta <sanju.mehta@amd.com>");
+MODULE_AUTHOR("Nehal Bakulchandra Shah <nehal-bakulchandra.shah@amd.com>");
MODULE_DESCRIPTION("AMD SPI Master Controller Driver");
--
2.33.0
next prev parent reply other threads:[~2021-09-08 11:35 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-08 11:34 [PATCH v2 00/10] Improve support for AMD SPI controllers Lucas Tanure
2021-09-08 11:34 ` [PATCH 01/10] regmap: spi: Set regmap max raw r/w from max_transfer_size Lucas Tanure
2021-09-08 11:34 ` [PATCH 02/10] regmap: spi: Check raw_[read|write] against max message size Lucas Tanure
2021-09-08 13:09 ` Charles Keepax
2021-09-08 13:17 ` Charles Keepax
2021-09-08 11:34 ` [PATCH 03/10] spi: Add flag for no TX after a RX in the same Chip Select Lucas Tanure
2021-09-08 12:37 ` Mark Brown
2021-09-09 10:51 ` Lucas tanure
2021-09-10 14:44 ` Mark Brown
2021-09-08 11:34 ` [PATCH 04/10] spi: amd: Refactor code to use less spi_master_get_devdata Lucas Tanure
2021-09-08 11:34 ` [PATCH 05/10] spi: amd: Refactor amd_spi_busy_wait Lucas Tanure
2021-09-08 11:34 ` [PATCH 06/10] spi: amd: Remove unneeded variable Lucas Tanure
2021-09-08 11:34 ` [PATCH 07/10] spi: amd: Check for idle bus before execute opcode Lucas Tanure
2021-09-08 11:34 ` [PATCH 08/10] spi: amd: Fill FIFO buffer with the whole message Lucas Tanure
2021-09-08 13:22 ` Charles Keepax
2021-09-08 11:34 ` Lucas Tanure [this message]
2021-09-12 21:53 ` [PATCH 09/10] spi: amd: Add support for latest platform Gabriel Krisman Bertazi
2021-09-08 12:28 ` [PATCH v2 00/10] Improve support for AMD SPI controllers Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210908113450.788452-10-tanureal@opensource.cirrus.com \
--to=tanureal@opensource.cirrus.com \
--cc=Nehal-Bakulchandra.shah@amd.com \
--cc=broonie@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
--cc=rafael@kernel.org \
--cc=sanju.mehta@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).