Re: [PATCH v7 06/14] spi: spi-mem: Kill the spi_mem_dtr_supports_op() helper

[Miquel Raynal <miquel.raynal@bootlin.com>]

Hi Pratyush,

p.yadav@ti.com wrote on Tue, 21 Dec 2021 15:40:54 +0530:

> On 21/12/21 10:58AM, Miquel Raynal wrote:
> > Hi Pratyush,
> > 
> > p.yadav@ti.com wrote on Tue, 21 Dec 2021 00:28:42 +0530:
> >   
> > > On 17/12/21 05:16PM, Miquel Raynal wrote:  
> > > > Now that spi_mem_default_supports_op() has access to the static
> > > > controller capabilities (related to memory operations), and now that
> > > > these capabilities have been filled by the impacted controllers, there
> > > > is no need for a specific helper checking only DTR operations, so let's
> > > > just kill spi_mem_dtr_supports_op() and simply use
> > > > spi_mem_default_supports_op() instead.
> > > > 
> > > > Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> > > > ---
> > > >  drivers/spi/spi-cadence-quadspi.c |  5 +----
> > > >  drivers/spi/spi-mem.c             | 10 ----------
> > > >  drivers/spi/spi-mxic.c            | 10 +---------
> > > >  include/linux/spi/spi-mem.h       | 11 -----------
> > > >  4 files changed, 2 insertions(+), 34 deletions(-)
> > > > 
> > > > diff --git a/drivers/spi/spi-mxic.c b/drivers/spi/spi-mxic.c
> > > > index e137b1ec85d4..67d05ee8d6a0 100644
> > > > --- a/drivers/spi/spi-mxic.c
> > > > +++ b/drivers/spi/spi-mxic.c
> > > > @@ -335,8 +335,6 @@ static int mxic_spi_data_xfer(struct mxic_spi *mxic, const void *txbuf,
> > > >  static bool mxic_spi_mem_supports_op(struct spi_mem *mem,
> > > >  				     const struct spi_mem_op *op)
> > > >  {
> > > > -	bool all_false;
> > > > -
> > > >  	if (op->data.buswidth > 8 || op->addr.buswidth > 8 ||
> > > >  	    op->dummy.buswidth > 8 || op->cmd.buswidth > 8)
> > > >  		return false;
> > > > @@ -348,13 +346,7 @@ static bool mxic_spi_mem_supports_op(struct spi_mem *mem,
> > > >  	if (op->addr.nbytes > 7)
> > > >  		return false;
> > > >  
> > > > -	all_false = !op->cmd.dtr && !op->addr.dtr && !op->dummy.dtr &&
> > > > -		    !op->data.dtr;
> > > > -
> > > > -	if (all_false)
> > > > -		return spi_mem_default_supports_op(mem, op);
> > > > -	else
> > > > -		return spi_mem_dtr_supports_op(mem, op);
> > > > +	return spi_mem_default_supports_op(mem, op);    
> > > 
> > > Does this controller support mixed DTR modes? If it doesn't then it 
> > > should reject mixed DTR ops before calling 
> > > spi_mem_default_supports_op(). Anyway, the current driver doesn't check 
> > > for it either so this change does not make anything worse at the very 
> > > least.  
> > 
> > The Cadence SPI driver does something like:
> > 
> > all_true = cmd.dtr && addr.dtr ...;
> > all_false = !cmd.dtr && !addr.dtr ...;
> > if (!all_true || !all_false)
> > 	return false;
> > 
> > This basically rules out any mixed DTR operation.
> > 
> > I believe Macronix code is inspired from this function, but they
> > intentionally dropped the all_true check, making the situation boolean:
> > either there is at least one DTR op, or there is none. So I believe
> > this was done on purpose and this controller supports mixed DTR ops.  
> 
> I see that your other patches in this series touch this driver so you 
> should have the datasheet right? Can you look and see for sure if it 
> does? I am fine with the patch as it is but if we can make the check 
> stricter it would be nice.

As discussed on IRC, I've checked the datasheet and indeed the
following modes are supported:
* 1S-1D-1D
* 1S-2D-2D
* 1S-4D-4D
* 4S-4D-4D

So yes, even if there is no use of these modes yet, certain mixed modes
are supported by this controller.

> 
> >   
> > > Reviewed-by: Pratyush Yadav <p.yadav@ti.com>  

Thanks,
Miquèl