linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
To: Mark Brown <broonie@kernel.org>,
	Nicolas Ferre <nicolas.ferre@microchip.com>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: linux-spi@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	kernel@pengutronix.de
Subject: [PATCH 2/3] spi: atmel-quadspi: Free resources even if runtime resume failed in .remove()
Date: Fri, 17 Mar 2023 09:42:31 +0100	[thread overview]
Message-ID: <20230317084232.142257-3-u.kleine-koenig@pengutronix.de> (raw)
In-Reply-To: <20230317084232.142257-1-u.kleine-koenig@pengutronix.de>

An early error exit in atmel_qspi_remove() doesn't prevent the device
unbind. So this results in an spi controller with an unbound parent
and unmapped register space (because devm_ioremap_resource() is undone).
So using the remaining spi controller probably results in an oops.

Instead unregister the controller unconditionally and only skip hardware
access and clk disable.

Also add a warning about resume failing and return zero unconditionally.
The latter has the only effect to suppress a less helpful error message by
the spi core.

Fixes: 4a2f83b7f780 ("spi: atmel-quadspi: add runtime pm support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/spi/atmel-quadspi.c | 24 +++++++++++++++++-------
 1 file changed, 17 insertions(+), 7 deletions(-)

diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c
index 0c6f80ddea57..713a4d6700fd 100644
--- a/drivers/spi/atmel-quadspi.c
+++ b/drivers/spi/atmel-quadspi.c
@@ -706,18 +706,28 @@ static int atmel_qspi_remove(struct platform_device *pdev)
 	struct atmel_qspi *aq = spi_controller_get_devdata(ctrl);
 	int ret;
 
-	ret = pm_runtime_resume_and_get(&pdev->dev);
-	if (ret < 0)
-		return ret;
-
 	spi_unregister_controller(ctrl);
-	atmel_qspi_write(QSPI_CR_QSPIDIS, aq, QSPI_CR);
+
+	ret = pm_runtime_get_sync(&pdev->dev);
+	if (ret >= 0) {
+		atmel_qspi_write(QSPI_CR_QSPIDIS, aq, QSPI_CR);
+		clk_disable(aq->qspick);
+		clk_disable(aq->pclk);
+	} else {
+		/*
+		 * atmel_qspi_runtime_{suspend,resume} just disable and enable
+		 * the two clks respectively. So after resume failed these are
+		 * off, and we skip hardware access and disabling these clks again.
+		 */
+		dev_warn(&pdev->dev, "Failed to resume device on remove\n");
+	}
+
+	clk_unprepare(aq->qspick);
+	clk_unprepare(aq->pclk);
 
 	pm_runtime_disable(&pdev->dev);
 	pm_runtime_put_noidle(&pdev->dev);
 
-	clk_disable_unprepare(aq->qspick);
-	clk_disable_unprepare(aq->pclk);
 	return 0;
 }
 
-- 
2.39.2


  parent reply	other threads:[~2023-03-17  8:44 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-17  8:42 [PATCH 0/3] spi: atmel-quadspi: Convert to platform remove callback returning void Uwe Kleine-König
2023-03-17  8:42 ` [PATCH 1/3] spi: atmel-quadspi: Don't leak clk enable count in pm resume Uwe Kleine-König
2023-03-17 10:01   ` Tudor Ambarus
2023-03-17  8:42 ` Uwe Kleine-König [this message]
2023-03-17 10:15   ` [PATCH 2/3] spi: atmel-quadspi: Free resources even if runtime resume failed in .remove() Tudor Ambarus
2023-03-17  8:42 ` [PATCH 3/3] spi: atmel-quadspi: Convert to platform remove callback returning void Uwe Kleine-König
2023-03-17 10:16   ` Tudor Ambarus
2023-03-17 17:44 ` [PATCH 0/3] " Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230317084232.142257-3-u.kleine-koenig@pengutronix.de \
    --to=u.kleine-koenig@pengutronix.de \
    --cc=alexandre.belloni@bootlin.com \
    --cc=broonie@kernel.org \
    --cc=claudiu.beznea@microchip.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=nicolas.ferre@microchip.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).