[PATCH] spi: s3c64xx: Disable IRQ mode when using DMA

[Jaewon Kim <jaewon02.kim@samsung.com>]

Fixing the problem of enabling DMA mode and IRQ mode at the same time.
In this case, a value of more than 6bits is written to RDY_LVL, it can
cause an invasion of other registers, potentially leading to SPI
transfer failure.

Fixes: 1ee806718d5e ("spi: s3c64xx: support interrupt based pio mode")
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 drivers/spi/spi-s3c64xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 238db29fc93b..c6a8a6434140 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -782,7 +782,7 @@ static int s3c64xx_spi_transfer_one(struct spi_master *master,
 
 	do {
 		/* transfer size is greater than 32, change to IRQ mode */
-		if (xfer->len > S3C64XX_SPI_POLLING_SIZE)
+		if (!use_dma && xfer->len > S3C64XX_SPI_POLLING_SIZE)
 			use_irq = true;
 
 		if (use_irq) {
-- 
2.17.1