From: Varshini Rajendran <varshini.rajendran@microchip.com>
To: <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
<conor+dt@kernel.org>, <nicolas.ferre@microchip.com>,
<alexandre.belloni@bootlin.com>, <claudiu.beznea@microchip.com>,
<mturquette@baylibre.com>, <sboyd@kernel.org>,
<herbert@gondor.apana.org.au>, <davem@davemloft.net>,
<vkoul@kernel.org>, <andi.shyti@kernel.org>, <tglx@linutronix.de>,
<maz@kernel.org>, <lee@kernel.org>, <ulf.hansson@linaro.org>,
<tudor.ambarus@linaro.org>, <miquel.raynal@bootlin.com>,
<richard@nod.at>, <vigneshr@ti.com>, <edumazet@google.com>,
<kuba@kernel.org>, <pabeni@redhat.com>,
<linus.walleij@linaro.org>, <sre@kernel.org>,
<p.zabel@pengutronix.de>, <olivia@selenic.com>,
<a.zummo@towertech.it>, <radu_nicolae.pirea@upb.ro>,
<richard.genoud@gmail.com>, <gregkh@linuxfoundation.org>,
<lgirdwood@gmail.com>, <broonie@kernel.org>,
<wim@linux-watchdog.org>, <linux@roeck-us.net>,
<linux@armlinux.org.uk>, <durai.manickamkr@microchip.com>,
<varshini.rajendran@microchip.com>, <andrew@lunn.ch>,
<jerry.ray@microchip.com>, <andre.przywara@arm.com>,
<mani@kernel.org>, <alexandre.torgue@st.com>,
<gregory.clement@bootlin.com>, <arnd@arndb.de>,
<rientjes@google.com>, <deller@gmx.de>, <42.hyeyoo@gmail.com>,
<vbabka@suse.cz>, <mripard@kernel.org>,
<mihai.sain@microchip.com>, <codrin.ciubotariu@microchip.com>,
<eugen.hristev@collabora.com>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <linux-clk@vger.kernel.org>,
<linux-crypto@vger.kernel.org>, <dmaengine@vger.kernel.org>,
<linux-i2c@vger.kernel.org>, <linux-mmc@vger.kernel.org>,
<linux-mtd@lists.infradead.org>, <netdev@vger.kernel.org>,
<linux-gpio@vger.kernel.org>, <linux-pm@vger.kernel.org>,
<linux-rtc@vger.kernel.org>, <linux-spi@vger.kernel.org>,
<linux-serial@vger.kernel.org>, <alsa-devel@alsa-project.org>,
<linux-usb@vger.kernel.org>, <linux-watchdog@vger.kernel.org>
Subject: [PATCH v3 00/50] Add support for sam9x7 SoC family
Date: Fri, 28 Jul 2023 15:52:23 +0530 [thread overview]
Message-ID: <20230728102223.265216-1-varshini.rajendran@microchip.com> (raw)
This patch series adds support for the new SoC family - sam9x7.
- The device tree, configs and drivers are added
- Clock driver for sam9x7 is added
- Support for basic peripherals is added
- Target board SAM9X75 Curiosity is added
Changes in v3:
--------------
- Fixed the DT documentation errors pointed out in v2.
- Dropped Acked-by tag in tcb DT doc patch as it had to be adapted
according to sam9x7 correctly.
- Picked by the previously missed tags.
- Dropped this patch "dt-bindings: usb: generic-ehci: Document clock-names
property" as the warning was not found while validating DT-schema for
at91-sam9x75_curiosity.dtb.
- Dropped redundant words in the commit message.
- Fixed the CHECK_DTBS warnings validated against
at91-sam9x75_curiosity.dtb.
- Renamed dt nodes according to naming convention.
- Dropped unwanted status property in dts.
- Removed nodes that are not in use from the board dts.
- Removed spi DT doc patch from the series as it was already applied
and a fix patch was applied subsequently. Added a patch to remove the
compatible to adapt sam9x7.
- Added sam9x7 compatibles in usb dt documentation.
Changes in v2:
--------------
- Added sam9x7 specific compatibles in DT with fallbacks
- Documented all the newly added DT compatible strings
- Added device tree for the target board sam9x75 curiosity and
documented the same in the DT bindings documentation
- Removed the dt nodes that are not supported at the moment
- Removed the configs added by previous version that are not supported
at the moment
- Fixed all the corrections in the commit message
- Changed all the instances of copyright year to 2023
- Added sam9x7 flag in PIT64B configuration
- Moved macro definitions to header file
- Added another divider in mck characteristics in the pmc driver
- Fixed the memory leak in the pmc driver
- Dropped patches that are no longer needed
- Picked up Acked-by and Reviewed-by tags
Hari Prasath (1):
irqchip/atmel-aic5: Add support for sam9x7 aic
Varshini Rajendran (49):
dt-bindings: microchip: atmel,at91rm9200-tcb: add sam9x60, sam9x7
compatible
dt-bindings: usb: ehci: Add atmel at91sam9g45-ehci compatible
dt-bindings: net: cdns,macb: add sam9x7 ethernet interface
dt-bindings: clk: at91: add sam9x7
dt-bindings: clk: at91: add sam9x7 clock controller
dt-bindings: reset: atmel,at91sam9260-reset: add sam9x7
dt-bindings: power: reset: atmel,sama5d2-shdwc: add sam9x7
dt-bindings: atmel-sysreg: add sam9x7
dt-bindings: crypto: add sam9x7 in Atmel AES
dt-bindings: crypto: add sam9x7 in Atmel SHA
dt-bindings: crypto: add sam9x7 in Atmel TDES
dt-bindings: dmaengine: at_xdmac: add compatible with microchip,sam9x7
dt-bindings: i2c: at91: Add sam9x7 compatible string
dt-bindings: mfd: at91: Add SAM9X7 compatible string
dt-bindings: atmel-gpbr: add microchip,sam9x7-gpbr
dt-bindings: atmel-matrix: add microchip,sam9x7-matrix
dt-bindings: atmel-smc: add microchip,sam9x7-smc
dt-bindings: atmel-ssc: add microchip,sam9x7-ssc
dt-bindings: sdhci-of-at91: add microchip,sam9x7-sdhci
dt-bindings: atmel-nand: add microchip,sam9x7-pmecc
dt-bindings: pinctrl: at91: add sam9x7
dt-bindings: rng: atmel,at91-trng: add sam9x7 TRNG
dt-bindings: rtc: at91rm9200: add sam9x7 compatible
dt-bindings: rtt: at91rm9260: add sam9x7 compatible
dt-bindings: serial: atmel,at91-usart: add compatible for sam9x7
dt-bindings: atmel-classd: add sam9x7 compatible
dt-bindings: usb: atmel: add sam9x7
dt-bindings: watchdog: sama5d4-wdt: add compatible for sam9x7-wdt
dt-bindings: irqchip/atmel-aic5: Add support for sam9x7 aic
spi: dt-bindings: atmel,at91rm9200-spi: remove 9x60 compatible from
list
ASoC: dt-bindings: microchip: add sam9x7
dt-bindings: usb: ehci: Add sam9x7
dt-bindings: usb: add sam9x7
ARM: at91: pm: add support for sam9x7 SoC family
ARM: at91: pm: add sam9x7 SoC init config
ARM: at91: add support in SoC driver for new sam9x7
clk: at91: clk-sam9x60-pll: re-factor to support individual core freq
outputs
clk: at91: sam9x7: add support for HW PLL freq dividers
clk: at91: sama7g5: move mux table macros to header file
clk: at91: sam9x7: Allow PLLs to be exported and referenced in DT
clk: at91: sam9x7: add sam9x7 pmc driver
power: reset: at91-poweroff: lookup for proper pmc dt node for sam9x7
power: reset: at91-reset: add reset support for sam9x7 SoC
power: reset: at91-reset: add sdhwc support for sam9x7 SoC
ARM: at91: Kconfig: add config flag for SAM9X7 SoC
ARM: configs: at91: enable config flags for sam9x7 SoC family
ARM: dts: at91: sam9x7: add device tree for SoC
dt-bindings: arm: add sam9x75 curiosity board
ARM: dts: at91: sam9x75_curiosity: add sam9x75 curiosity board
.../devicetree/bindings/arm/atmel-at91.yaml | 6 +
.../devicetree/bindings/arm/atmel-sysregs.txt | 7 +-
.../bindings/clock/atmel,at91rm9200-pmc.yaml | 1 +
.../bindings/clock/atmel,at91sam9x5-sckc.yaml | 3 +
.../crypto/atmel,at91sam9g46-aes.yaml | 6 +-
.../crypto/atmel,at91sam9g46-sha.yaml | 6 +-
.../crypto/atmel,at91sam9g46-tdes.yaml | 6 +-
.../devicetree/bindings/dma/atmel-xdma.txt | 3 +-
.../bindings/i2c/atmel,at91sam-i2c.yaml | 4 +
.../interrupt-controller/atmel,aic.txt | 2 +-
.../devicetree/bindings/mfd/atmel-flexcom.txt | 1 +
.../devicetree/bindings/mfd/atmel-gpbr.txt | 1 +
.../devicetree/bindings/mfd/atmel-matrix.txt | 1 +
.../devicetree/bindings/mfd/atmel-smc.txt | 1 +
.../devicetree/bindings/misc/atmel-ssc.txt | 1 +
.../devicetree/bindings/mmc/sdhci-atmel.txt | 4 +-
.../devicetree/bindings/mtd/atmel-nand.txt | 1 +
.../devicetree/bindings/net/cdns,macb.yaml | 6 +
.../bindings/pinctrl/atmel,at91-pinctrl.txt | 2 +
.../power/reset/atmel,sama5d2-shdwc.yaml | 3 +
.../reset/atmel,at91sam9260-reset.yaml | 4 +
.../bindings/rng/atmel,at91-trng.yaml | 4 +
.../bindings/rtc/atmel,at91rm9200-rtc.yaml | 18 +-
.../bindings/rtc/atmel,at91sam9260-rtt.yaml | 3 +
.../bindings/serial/atmel,at91-usart.yaml | 9 +
.../soc/microchip/atmel,at91rm9200-tcb.yaml | 21 +-
.../bindings/sound/atmel,sama5d2-classd.yaml | 7 +-
.../sound/microchip,sama7g5-i2smcc.yaml | 11 +-
.../bindings/spi/atmel,at91rm9200-spi.yaml | 1 -
.../devicetree/bindings/usb/atmel-usb.txt | 11 +-
.../devicetree/bindings/usb/generic-ehci.yaml | 7 +
.../devicetree/bindings/usb/generic-ohci.yaml | 6 +
.../bindings/watchdog/atmel,sama5d4-wdt.yaml | 15 +-
arch/arm/boot/dts/microchip/Makefile | 5 +
.../dts/microchip/at91-sam9x75_curiosity.dts | 311 +++++
arch/arm/boot/dts/microchip/sam9x7.dtsi | 1238 +++++++++++++++++
arch/arm/configs/at91_dt_defconfig | 1 +
arch/arm/mach-at91/Kconfig | 23 +-
arch/arm/mach-at91/Makefile | 1 +
arch/arm/mach-at91/generic.h | 2 +
arch/arm/mach-at91/pm.c | 35 +
arch/arm/mach-at91/sam9x7.c | 34 +
drivers/clk/at91/Makefile | 1 +
drivers/clk/at91/clk-sam9x60-pll.c | 50 +-
drivers/clk/at91/pmc.h | 18 +
drivers/clk/at91/sam9x60.c | 7 +
drivers/clk/at91/sam9x7.c | 946 +++++++++++++
drivers/clk/at91/sama7g5.c | 42 +-
drivers/irqchip/irq-atmel-aic5.c | 10 +
drivers/power/reset/Kconfig | 4 +-
drivers/power/reset/at91-sama5d2_shdwc.c | 1 +
drivers/soc/atmel/soc.c | 23 +
drivers/soc/atmel/soc.h | 9 +
include/dt-bindings/clock/at91.h | 4 +
54 files changed, 2871 insertions(+), 76 deletions(-)
create mode 100644 arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts
create mode 100644 arch/arm/boot/dts/microchip/sam9x7.dtsi
create mode 100644 arch/arm/mach-at91/sam9x7.c
create mode 100644 drivers/clk/at91/sam9x7.c
--
2.25.1
next reply other threads:[~2023-07-28 10:25 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-28 10:22 Varshini Rajendran [this message]
2023-07-28 11:32 ` [PATCH v3 00/50] Add support for sam9x7 SoC family Krzysztof Kozlowski
2023-07-28 15:50 ` Conor Dooley
2023-07-28 16:04 ` Miquel Raynal
2023-07-28 16:10 ` Conor Dooley
2023-07-28 16:36 ` Krzysztof Kozlowski
2023-07-28 11:32 ` Krzysztof Kozlowski
2023-07-28 14:46 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230728102223.265216-1-varshini.rajendran@microchip.com \
--to=varshini.rajendran@microchip.com \
--cc=42.hyeyoo@gmail.com \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@bootlin.com \
--cc=alexandre.torgue@st.com \
--cc=alsa-devel@alsa-project.org \
--cc=andi.shyti@kernel.org \
--cc=andre.przywara@arm.com \
--cc=andrew@lunn.ch \
--cc=arnd@arndb.de \
--cc=broonie@kernel.org \
--cc=claudiu.beznea@microchip.com \
--cc=codrin.ciubotariu@microchip.com \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=deller@gmx.de \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=durai.manickamkr@microchip.com \
--cc=edumazet@google.com \
--cc=eugen.hristev@collabora.com \
--cc=gregkh@linuxfoundation.org \
--cc=gregory.clement@bootlin.com \
--cc=herbert@gondor.apana.org.au \
--cc=jerry.ray@microchip.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kuba@kernel.org \
--cc=lee@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=linux@roeck-us.net \
--cc=mani@kernel.org \
--cc=maz@kernel.org \
--cc=mihai.sain@microchip.com \
--cc=miquel.raynal@bootlin.com \
--cc=mripard@kernel.org \
--cc=mturquette@baylibre.com \
--cc=netdev@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=olivia@selenic.com \
--cc=p.zabel@pengutronix.de \
--cc=pabeni@redhat.com \
--cc=radu_nicolae.pirea@upb.ro \
--cc=richard.genoud@gmail.com \
--cc=richard@nod.at \
--cc=rientjes@google.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=sre@kernel.org \
--cc=tglx@linutronix.de \
--cc=tudor.ambarus@linaro.org \
--cc=ulf.hansson@linaro.org \
--cc=vbabka@suse.cz \
--cc=vigneshr@ti.com \
--cc=vkoul@kernel.org \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).