From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Mark Brown <broonie@kernel.org>,
linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Alexander Sverdlin <alexander.sverdlin@siemens.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH v1 1/3] spidev: Decrease indentation level in spidev_ioctl() SPI_IOC_RD_MODE*
Date: Thu, 24 Aug 2023 19:22:07 +0300 [thread overview]
Message-ID: <20230824162209.2890440-2-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20230824162209.2890440-1-andriy.shevchenko@linux.intel.com>
Instead of defining a local controller variable inside an indented
block, move the definition to the top of spidev_ioctl() and reuse
it in the SPI_IOC_RD_MODE* and SPI_IOC_WR_MODE* cases.
This drops unneeded indentation and reduces amount of LoCs.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/spi/spidev.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index d13dc15cc191..dc516f0ca71f 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -357,6 +357,7 @@ spidev_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
int retval = 0;
struct spidev_data *spidev;
struct spi_device *spi;
+ struct spi_controller *ctlr;
u32 tmp;
unsigned n_ioc;
struct spi_ioc_transfer *ioc;
@@ -376,6 +377,8 @@ spidev_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
return -ESHUTDOWN;
}
+ ctlr = spi->controller;
+
/* use the buffer lock here for triple duty:
* - prevent I/O (from us) so calling spi_setup() is safe;
* - prevent concurrent SPI_IOC_WR_* from morphing
@@ -390,13 +393,9 @@ spidev_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
case SPI_IOC_RD_MODE32:
tmp = spi->mode;
- {
- struct spi_controller *ctlr = spi->controller;
-
- if (ctlr->use_gpio_descriptors && ctlr->cs_gpiods &&
- ctlr->cs_gpiods[spi_get_chipselect(spi, 0)])
- tmp &= ~SPI_CS_HIGH;
- }
+ if (ctlr->use_gpio_descriptors && ctlr->cs_gpiods &&
+ ctlr->cs_gpiods[spi_get_chipselect(spi, 0)])
+ tmp &= ~SPI_CS_HIGH;
if (cmd == SPI_IOC_RD_MODE)
retval = put_user(tmp & SPI_MODE_MASK,
@@ -424,7 +423,6 @@ spidev_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
else
retval = get_user(tmp, (u32 __user *)arg);
if (retval == 0) {
- struct spi_controller *ctlr = spi->controller;
u32 save = spi->mode;
if (tmp & ~SPI_MODE_MASK) {
--
2.40.0.1.gaa8946217a0b
next prev parent reply other threads:[~2023-08-24 16:24 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-24 16:22 [PATCH v1 0/3] spidev: A few cleanups Andy Shevchenko
2023-08-24 16:22 ` Andy Shevchenko [this message]
2023-08-25 7:17 ` [PATCH v1 1/3] spidev: Decrease indentation level in spidev_ioctl() SPI_IOC_RD_MODE* Sverdlin, Alexander
2023-08-24 16:22 ` [PATCH v1 2/3] spidev: Switch to use spi_get_csgpiod() Andy Shevchenko
2023-08-25 7:17 ` Sverdlin, Alexander
2023-08-24 16:22 ` [PATCH v1 3/3] spidev: Simplify SPI_IOC_RD_MODE* cases in spidev_ioctl() Andy Shevchenko
2023-08-25 7:17 ` Sverdlin, Alexander
2023-09-12 11:37 ` [PATCH v1 0/3] spidev: A few cleanups Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230824162209.2890440-2-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=alexander.sverdlin@siemens.com \
--cc=broonie@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).