From: kernel test robot <lkp@intel.com>
To: Bartosz Golaszewski <brgl@bgdev.pl>,
Mark Brown <broonie@kernel.org>,
Florian Fainelli <florian.fainelli@broadcom.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Linus Walleij <linus.walleij@linaro.org>,
Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>
Cc: oe-kbuild-all@lists.linux.dev,
Broadcom internal kernel review list
<bcm-kernel-feedback-list@broadcom.com>,
linux-spi@vger.kernel.org, linux-rpi-kernel@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Subject: Re: [RFT PATCH] spi: bcm2835: reduce the abuse of the GPIO API
Date: Fri, 1 Sep 2023 06:51:26 +0800 [thread overview]
Message-ID: <202309010647.GUOYgT4J-lkp@intel.com> (raw)
In-Reply-To: <20230831194934.19628-1-brgl@bgdev.pl>
Hi Bartosz,
kernel test robot noticed the following build warnings:
[auto build test WARNING on broonie-spi/for-next]
[also build test WARNING on linus/master next-20230831]
[cannot apply to v6.5]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Bartosz-Golaszewski/spi-bcm2835-reduce-the-abuse-of-the-GPIO-API/20230901-035139
base: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next
patch link: https://lore.kernel.org/r/20230831194934.19628-1-brgl%40bgdev.pl
patch subject: [RFT PATCH] spi: bcm2835: reduce the abuse of the GPIO API
config: m68k-allyesconfig (https://download.01.org/0day-ci/archive/20230901/202309010647.GUOYgT4J-lkp@intel.com/config)
compiler: m68k-linux-gcc (GCC) 13.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20230901/202309010647.GUOYgT4J-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202309010647.GUOYgT4J-lkp@intel.com/
All warnings (new ones prefixed by >>):
>> drivers/spi/spi-bcm2835.c:146: warning: Function parameter or member 'cs_gpio' not described in 'bcm2835_spi'
vim +146 drivers/spi/spi-bcm2835.c
f8043872e79614 Chris Boot 2013-03-11 77
ff245d90ebed8d Martin Sperl 2019-04-23 78 /* define polling limits */
cbd632ea8ee4ae Jason Yan 2020-09-12 79 static unsigned int polling_limit_us = 30;
ff245d90ebed8d Martin Sperl 2019-04-23 80 module_param(polling_limit_us, uint, 0664);
ff245d90ebed8d Martin Sperl 2019-04-23 81 MODULE_PARM_DESC(polling_limit_us,
ff245d90ebed8d Martin Sperl 2019-04-23 82 "time in us to run a transfer in polling mode\n");
ff245d90ebed8d Martin Sperl 2019-04-23 83
acf0f856959937 Lukas Wunner 2018-11-08 84 /**
acf0f856959937 Lukas Wunner 2018-11-08 85 * struct bcm2835_spi - BCM2835 SPI controller
acf0f856959937 Lukas Wunner 2018-11-08 86 * @regs: base address of register map
acf0f856959937 Lukas Wunner 2018-11-08 87 * @clk: core clock, divided to calculate serial clock
c45c1e82bba130 Alexandru Tachici 2021-07-17 88 * @clk_hz: core clock cached speed
acf0f856959937 Lukas Wunner 2018-11-08 89 * @irq: interrupt, signals TX FIFO empty or RX FIFO ¾ full
3bd7f6589f67f0 Lukas Wunner 2018-11-08 90 * @tfr: SPI transfer currently processed
afe7e36360f4c9 Robin Murphy 2020-06-16 91 * @ctlr: SPI controller reverse lookup
acf0f856959937 Lukas Wunner 2018-11-08 92 * @tx_buf: pointer whence next transmitted byte is read
acf0f856959937 Lukas Wunner 2018-11-08 93 * @rx_buf: pointer where next received byte is written
acf0f856959937 Lukas Wunner 2018-11-08 94 * @tx_len: remaining bytes to transmit
acf0f856959937 Lukas Wunner 2018-11-08 95 * @rx_len: remaining bytes to receive
3bd7f6589f67f0 Lukas Wunner 2018-11-08 96 * @tx_prologue: bytes transmitted without DMA if first TX sglist entry's
3bd7f6589f67f0 Lukas Wunner 2018-11-08 97 * length is not a multiple of 4 (to overcome hardware limitation)
3bd7f6589f67f0 Lukas Wunner 2018-11-08 98 * @rx_prologue: bytes received without DMA if first RX sglist entry's
3bd7f6589f67f0 Lukas Wunner 2018-11-08 99 * length is not a multiple of 4 (to overcome hardware limitation)
3bd7f6589f67f0 Lukas Wunner 2018-11-08 100 * @tx_spillover: whether @tx_prologue spills over to second TX sglist entry
154f7da56f1ecb Martin Sperl 2019-04-23 101 * @debugfs_dir: the debugfs directory - neede to remove debugfs when
154f7da56f1ecb Martin Sperl 2019-04-23 102 * unloading the module
154f7da56f1ecb Martin Sperl 2019-04-23 103 * @count_transfer_polling: count of how often polling mode is used
154f7da56f1ecb Martin Sperl 2019-04-23 104 * @count_transfer_irq: count of how often interrupt mode is used
154f7da56f1ecb Martin Sperl 2019-04-23 105 * @count_transfer_irq_after_polling: count of how often we fall back to
154f7da56f1ecb Martin Sperl 2019-04-23 106 * interrupt mode after starting in polling mode.
154f7da56f1ecb Martin Sperl 2019-04-23 107 * These are counted as well in @count_transfer_polling and
154f7da56f1ecb Martin Sperl 2019-04-23 108 * @count_transfer_irq
154f7da56f1ecb Martin Sperl 2019-04-23 109 * @count_transfer_dma: count how often dma mode is used
00be843bc1c3c7 Yang Yingliang 2023-07-28 110 * @target: SPI target currently selected
8259bf667a0f9e Lukas Wunner 2019-09-11 111 * (used by bcm2835_spi_dma_tx_done() to write @clear_rx_cs)
8259bf667a0f9e Lukas Wunner 2019-09-11 112 * @tx_dma_active: whether a TX DMA descriptor is in progress
8259bf667a0f9e Lukas Wunner 2019-09-11 113 * @rx_dma_active: whether a RX DMA descriptor is in progress
8259bf667a0f9e Lukas Wunner 2019-09-11 114 * (used by bcm2835_spi_dma_tx_done() to handle a race)
2b8279aec1829d Lukas Wunner 2019-09-11 115 * @fill_tx_desc: preallocated TX DMA descriptor used for RX-only transfers
2b8279aec1829d Lukas Wunner 2019-09-11 116 * (cyclically copies from zero page to TX FIFO)
2b8279aec1829d Lukas Wunner 2019-09-11 117 * @fill_tx_addr: bus address of zero page
acf0f856959937 Lukas Wunner 2018-11-08 118 */
f8043872e79614 Chris Boot 2013-03-11 119 struct bcm2835_spi {
f8043872e79614 Chris Boot 2013-03-11 120 void __iomem *regs;
f8043872e79614 Chris Boot 2013-03-11 121 struct clk *clk;
1098696c0d4d2d Bartosz Golaszewski 2023-08-31 122 struct gpio_desc *cs_gpio;
c45c1e82bba130 Alexandru Tachici 2021-07-17 123 unsigned long clk_hz;
f8043872e79614 Chris Boot 2013-03-11 124 int irq;
3bd7f6589f67f0 Lukas Wunner 2018-11-08 125 struct spi_transfer *tfr;
afe7e36360f4c9 Robin Murphy 2020-06-16 126 struct spi_controller *ctlr;
f8043872e79614 Chris Boot 2013-03-11 127 const u8 *tx_buf;
f8043872e79614 Chris Boot 2013-03-11 128 u8 *rx_buf;
e34ff011c70e5f Martin Sperl 2015-03-26 129 int tx_len;
e34ff011c70e5f Martin Sperl 2015-03-26 130 int rx_len;
3bd7f6589f67f0 Lukas Wunner 2018-11-08 131 int tx_prologue;
3bd7f6589f67f0 Lukas Wunner 2018-11-08 132 int rx_prologue;
b31a9299bca66c Lukas Wunner 2018-11-29 133 unsigned int tx_spillover;
154f7da56f1ecb Martin Sperl 2019-04-23 134
154f7da56f1ecb Martin Sperl 2019-04-23 135 struct dentry *debugfs_dir;
154f7da56f1ecb Martin Sperl 2019-04-23 136 u64 count_transfer_polling;
154f7da56f1ecb Martin Sperl 2019-04-23 137 u64 count_transfer_irq;
154f7da56f1ecb Martin Sperl 2019-04-23 138 u64 count_transfer_irq_after_polling;
154f7da56f1ecb Martin Sperl 2019-04-23 139 u64 count_transfer_dma;
8259bf667a0f9e Lukas Wunner 2019-09-11 140
00be843bc1c3c7 Yang Yingliang 2023-07-28 141 struct bcm2835_spidev *target;
8259bf667a0f9e Lukas Wunner 2019-09-11 142 unsigned int tx_dma_active;
8259bf667a0f9e Lukas Wunner 2019-09-11 143 unsigned int rx_dma_active;
2b8279aec1829d Lukas Wunner 2019-09-11 144 struct dma_async_tx_descriptor *fill_tx_desc;
2b8279aec1829d Lukas Wunner 2019-09-11 145 dma_addr_t fill_tx_addr;
ec679bda639fe8 Lukas Wunner 2021-05-27 @146 };
ec679bda639fe8 Lukas Wunner 2021-05-27 147
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
next prev parent reply other threads:[~2023-08-31 22:52 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-31 19:49 [RFT PATCH] spi: bcm2835: reduce the abuse of the GPIO API Bartosz Golaszewski
2023-08-31 22:51 ` kernel test robot [this message]
2023-08-31 23:24 ` Andy Shevchenko
2023-09-01 7:40 ` Bartosz Golaszewski
2023-09-01 8:55 ` Andy Shevchenko
2023-09-01 9:22 ` Linus Walleij
2023-09-01 9:34 ` Bartosz Golaszewski
2023-08-31 23:27 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=202309010647.GUOYgT4J-lkp@intel.com \
--to=lkp@intel.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=bartosz.golaszewski@linaro.org \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=brgl@bgdev.pl \
--cc=broonie@kernel.org \
--cc=florian.fainelli@broadcom.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=linux-spi@vger.kernel.org \
--cc=oe-kbuild-all@lists.linux.dev \
--cc=rjui@broadcom.com \
--cc=sbranden@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).