[PATCH] spi: dt-bindings: st,stm32-spi: Move "st,spi-midi-ns" to spi-peripheral-props.yaml

[Rob Herring <robh@kernel.org>]

In order to validate SPI peripherals, SPI controller-specific child node
properties need to be in a separate schema, spi-peripheral-props.yaml,
which SPI peripheral schemas reference. As there is just a single
property in this case, just add it to spi-peripheral-props.yaml directly.

Signed-off-by: Rob Herring <robh@kernel.org>
---
 .../bindings/spi/spi-peripheral-props.yaml    |  5 +++++
 .../devicetree/bindings/spi/st,stm32-spi.yaml | 20 -------------------
 2 files changed, 5 insertions(+), 20 deletions(-)

diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
index dc4f7bb47090..15938f81fdce 100644
--- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
@@ -113,6 +113,11 @@ properties:
     minItems: 2
     maxItems: 4
 
+  st,spi-midi-ns:
+    description: |
+      Only for STM32H7, (Master Inter-Data Idleness) minimum time
+      delay in nanoseconds inserted between two consecutive data frames.
+
 # The controller specific properties go here.
 allOf:
   - $ref: arm,pl022-peripheral-props.yaml#
diff --git a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
index 9ca1a843c820..ae0f082bd377 100644
--- a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
@@ -18,15 +18,6 @@ maintainers:
 
 allOf:
   - $ref: spi-controller.yaml#
-  - if:
-      properties:
-        compatible:
-          contains:
-            const: st,stm32f4-spi
-
-    then:
-      properties:
-        st,spi-midi-ns: false
 
 properties:
   compatible:
@@ -59,17 +50,6 @@ properties:
       - const: rx
       - const: tx
 
-patternProperties:
-  "^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-f]+$":
-    type: object
-    # SPI slave nodes must be children of the SPI master node and can
-    # contain the following properties.
-    properties:
-      st,spi-midi-ns:
-        description: |
-          Only for STM32H7, (Master Inter-Data Idleness) minimum time
-          delay in nanoseconds inserted between two consecutive data frames.
-
 required:
   - compatible
   - reg
-- 
2.40.1