linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: David Lechner <dlechner@baylibre.com>
To: linux-spi@vger.kernel.org
Cc: "David Lechner" <dlechner@baylibre.com>,
	"Mark Brown" <broonie@kernel.org>,
	"Michael Hennerich" <michael.hennerich@analog.com>,
	"Nuno Sá" <nuno.sa@analog.com>,
	linux-kernel@vger.kernel.org,
	"Lars-Peter Clausen" <lars@metafoo.de>
Subject: [PATCH 9/9] spi: axi-spi-engine: add watchdog timer
Date: Mon,  4 Dec 2023 11:33:35 -0600	[thread overview]
Message-ID: <20231204-axi-spi-engine-series-2-v1-9-063672323fce@baylibre.com> (raw)
In-Reply-To: <20231204-axi-spi-engine-series-2-v1-0-063672323fce@baylibre.com>

If there is an issue with the AXI SPI Engine hardware a scheduled
transfer might never be completed and spi_sync() will block forever.
This due to the uninterruptible wait for completion waiting for the
spi_finalize_current_message() that never comes.

Add a watchdog timer that will abort a transfer 5 seconds after it has
been started. This will potentially leave the hardware in a broken state
but it allows software to recover and allow to better diagnose the
underlying issue.

Co-developed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: David Lechner <dlechner@baylibre.com>
---
 drivers/spi/spi-axi-spi-engine.c | 29 ++++++++++++++++++++++++++---
 1 file changed, 26 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-axi-spi-engine.c b/drivers/spi/spi-axi-spi-engine.c
index 78221715ba81..58280dd1c901 100644
--- a/drivers/spi/spi-axi-spi-engine.c
+++ b/drivers/spi/spi-axi-spi-engine.c
@@ -13,6 +13,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
+#include <linux/timer.h>
 
 #define SPI_ENGINE_VERSION_MAJOR(x)	((x >> 16) & 0xff)
 #define SPI_ENGINE_VERSION_MINOR(x)	((x >> 8) & 0xff)
@@ -114,6 +115,8 @@ struct spi_engine {
 
 	void __iomem *base;
 	struct ida sync_ida;
+	struct timer_list watchdog_timer;
+	struct spi_controller *controller;
 
 	unsigned int int_enable;
 };
@@ -488,9 +491,11 @@ static irqreturn_t spi_engine_irq(int irq, void *devid)
 		struct spi_engine_message_state *st = msg->state;
 
 		if (completed_id == st->sync_id) {
-			msg->status = 0;
-			msg->actual_length = msg->frame_length;
-			spi_finalize_current_message(host);
+			if (timer_delete_sync(&spi_engine->watchdog_timer)) {
+				msg->status = 0;
+				msg->actual_length = msg->frame_length;
+				spi_finalize_current_message(host);
+			}
 			disable_int |= SPI_ENGINE_INT_SYNC;
 		}
 	}
@@ -573,6 +578,8 @@ static int spi_engine_transfer_one_message(struct spi_controller *host,
 	unsigned int int_enable = 0;
 	unsigned long flags;
 
+	mod_timer(&spi_engine->watchdog_timer, jiffies + msecs_to_jiffies(5000));
+
 	spin_lock_irqsave(&spi_engine->lock, flags);
 
 	if (spi_engine_write_cmd_fifo(spi_engine, msg))
@@ -596,6 +603,20 @@ static int spi_engine_transfer_one_message(struct spi_controller *host,
 	return 0;
 }
 
+static void spi_engine_timeout(struct timer_list *timer)
+{
+	struct spi_engine *spi_engine = from_timer(spi_engine, timer, watchdog_timer);
+	struct spi_controller *host = spi_engine->controller;
+
+	if (WARN_ON(!host->cur_msg))
+		return;
+
+	dev_err(&host->dev,
+		"Timeout occurred while waiting for transfer to complete. Hardware is probably broken.\n");
+	host->cur_msg->status = -ETIMEDOUT;
+	spi_finalize_current_message(host);
+}
+
 static void spi_engine_release_hw(void *p)
 {
 	struct spi_engine *spi_engine = p;
@@ -625,6 +646,8 @@ static int spi_engine_probe(struct platform_device *pdev)
 
 	spin_lock_init(&spi_engine->lock);
 	ida_init(&spi_engine->sync_ida);
+	timer_setup(&spi_engine->watchdog_timer, spi_engine_timeout, TIMER_IRQSAFE);
+	spi_engine->controller = host;
 
 	spi_engine->clk = devm_clk_get_enabled(&pdev->dev, "s_axi_aclk");
 	if (IS_ERR(spi_engine->clk))

-- 
2.43.0


  parent reply	other threads:[~2023-12-04 17:35 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-12-04 17:33 [PATCH 0/9] spi: axi-spi-engine: improvements round 2 David Lechner
2023-12-04 17:33 ` [PATCH 1/9] spi: axi-spi-engine: return void from spi_engine_compile_message() David Lechner
2023-12-04 17:33 ` [PATCH 2/9] spi: axi-spi-engine: populate xfer->effective_speed_hz David Lechner
2023-12-04 17:33 ` [PATCH 3/9] spi: axi-spi-engine: remove spi_engine_get_clk_div() David Lechner
2023-12-04 17:33 ` [PATCH 4/9] spi: axi-spi-engine: fix sleep ticks calculation David Lechner
2023-12-04 17:33 ` [PATCH 5/9] spi: axi-spi-engine: remove xfer arg from spi_engine_gen_sleep() David Lechner
2023-12-04 17:33 ` [PATCH 6/9] spi: axi-spi-engine: implement xfer->cs_change_delay David Lechner
2023-12-04 17:33 ` [PATCH 7/9] spi: axi-spi-engine: restore clkdiv at end of message David Lechner
2023-12-04 17:33 ` [PATCH 8/9] spi: axi-spi-engine: remove delay from CS assertion David Lechner
2023-12-04 17:33 ` David Lechner [this message]
2023-12-05 15:12 ` [PATCH 0/9] spi: axi-spi-engine: improvements round 2 Nuno Sá
2023-12-05 15:52   ` Hennerich, Michael
2023-12-06 21:04 ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231204-axi-spi-engine-series-2-v1-9-063672323fce@baylibre.com \
    --to=dlechner@baylibre.com \
    --cc=broonie@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=michael.hennerich@analog.com \
    --cc=nuno.sa@analog.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).