Linux SPI subsystem development
 help / color / mirror / Atom feed
From: Sam Protsenko <semen.protsenko@linaro.org>
To: Andi Shyti <andi.shyti@kernel.org>,
	Mark Brown <broonie@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>,
	linux-spi@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH] spi: s3c64xx: Extract FIFO depth calculation to a dedicated macro
Date: Sat, 20 Jan 2024 11:00:01 -0600	[thread overview]
Message-ID: <20240120170001.3356-1-semen.protsenko@linaro.org> (raw)

Simplify the code by extracting all cases of FIFO depth calculation into
a dedicated macro. No functional change.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
---
 drivers/spi/spi-s3c64xx.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index f7d623ad6ac3..7f7eb8f742e4 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -109,6 +109,7 @@
 #define TX_FIFO_LVL(v, i) (((v) >> 6) & FIFO_LVL_MASK(i))
 #define RX_FIFO_LVL(v, i) (((v) >> (i)->port_conf->rx_lvl_offset) & \
 					FIFO_LVL_MASK(i))
+#define FIFO_DEPTH(i) ((FIFO_LVL_MASK(i) >> 1) + 1)
 
 #define S3C64XX_SPI_MAX_TRAILCNT	0x3ff
 #define S3C64XX_SPI_TRAILCNT_OFF	19
@@ -406,7 +407,7 @@ static bool s3c64xx_spi_can_dma(struct spi_controller *host,
 	struct s3c64xx_spi_driver_data *sdd = spi_controller_get_devdata(host);
 
 	if (sdd->rx_dma.ch && sdd->tx_dma.ch) {
-		return xfer->len > (FIFO_LVL_MASK(sdd) >> 1) + 1;
+		return xfer->len > FIFO_DEPTH(sdd);
 	} else {
 		return false;
 	}
@@ -495,9 +496,7 @@ static u32 s3c64xx_spi_wait_for_timeout(struct s3c64xx_spi_driver_data *sdd,
 	void __iomem *regs = sdd->regs;
 	unsigned long val = 1;
 	u32 status;
-
-	/* max fifo depth available */
-	u32 max_fifo = (FIFO_LVL_MASK(sdd) >> 1) + 1;
+	u32 max_fifo = FIFO_DEPTH(sdd);
 
 	if (timeout_ms)
 		val = msecs_to_loops(timeout_ms);
@@ -604,7 +603,7 @@ static int s3c64xx_wait_for_pio(struct s3c64xx_spi_driver_data *sdd,
 	 * For any size less than the fifo size the below code is
 	 * executed atleast once.
 	 */
-	loops = xfer->len / ((FIFO_LVL_MASK(sdd) >> 1) + 1);
+	loops = xfer->len / FIFO_DEPTH(sdd);
 	buf = xfer->rx_buf;
 	do {
 		/* wait for data to be received in the fifo */
@@ -741,7 +740,7 @@ static int s3c64xx_spi_transfer_one(struct spi_controller *host,
 				    struct spi_transfer *xfer)
 {
 	struct s3c64xx_spi_driver_data *sdd = spi_controller_get_devdata(host);
-	const unsigned int fifo_len = (FIFO_LVL_MASK(sdd) >> 1) + 1;
+	const unsigned int fifo_len = FIFO_DEPTH(sdd);
 	const void *tx_buf = NULL;
 	void *rx_buf = NULL;
 	int target_len = 0, origin_len = 0;
@@ -1280,7 +1279,7 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
 	dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d with %d Targets attached\n",
 					sdd->port_id, host->num_chipselect);
 	dev_dbg(&pdev->dev, "\tIOmem=[%pR]\tFIFO %dbytes\n",
-					mem_res, (FIFO_LVL_MASK(sdd) >> 1) + 1);
+					mem_res, FIFO_DEPTH(sdd));
 
 	pm_runtime_mark_last_busy(&pdev->dev);
 	pm_runtime_put_autosuspend(&pdev->dev);
-- 
2.39.2


             reply	other threads:[~2024-01-20 17:00 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-20 17:00 Sam Protsenko [this message]
2024-01-21 20:23 ` [PATCH] spi: s3c64xx: Extract FIFO depth calculation to a dedicated macro Andi Shyti
2024-01-21 22:11   ` Sam Protsenko
2024-01-21 23:26     ` Andi Shyti
2024-01-22  2:34       ` Sam Protsenko
2024-01-22 20:44 ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240120170001.3356-1-semen.protsenko@linaro.org \
    --to=semen.protsenko@linaro.org \
    --cc=alim.akhtar@samsung.com \
    --cc=andi.shyti@kernel.org \
    --cc=broonie@kernel.org \
    --cc=krzysztof.kozlowski@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox