From: Charles Keepax <ckeepax@opensource.cirrus.com>
To: <lee@kernel.org>, <broonie@kernel.org>
Cc: <andy.shevchenko@gmail.com>, <patches@opensource.cirrus.com>,
<linux-kernel@vger.kernel.org>, <linux-spi@vger.kernel.org>
Subject: [PATCH v3 4/6] mfd: cs42l43: Add time postfixes on defines
Date: Thu, 25 Jan 2024 10:25:53 +0000 [thread overview]
Message-ID: <20240125102555.2621736-4-ckeepax@opensource.cirrus.com> (raw)
In-Reply-To: <20240125102555.2621736-1-ckeepax@opensource.cirrus.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
No changes since v2.
Thanks,
Charles
drivers/mfd/cs42l43.c | 36 ++++++++++++++++++------------------
1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/mfd/cs42l43.c b/drivers/mfd/cs42l43.c
index 65a331481d975..aea0f8f485785 100644
--- a/drivers/mfd/cs42l43.c
+++ b/drivers/mfd/cs42l43.c
@@ -27,30 +27,30 @@
#include "cs42l43.h"
-#define CS42L43_RESET_DELAY 20
+#define CS42L43_RESET_DELAY_MS 20
-#define CS42L43_SDW_ATTACH_TIMEOUT 500
-#define CS42L43_SDW_DETACH_TIMEOUT 100
+#define CS42L43_SDW_ATTACH_TIMEOUT_MS 500
+#define CS42L43_SDW_DETACH_TIMEOUT_MS 100
#define CS42L43_MCU_BOOT_STAGE1 1
#define CS42L43_MCU_BOOT_STAGE2 2
#define CS42L43_MCU_BOOT_STAGE3 3
#define CS42L43_MCU_BOOT_STAGE4 4
-#define CS42L43_MCU_POLL 5000
-#define CS42L43_MCU_CMD_TIMEOUT 20000
+#define CS42L43_MCU_POLL_US 5000
+#define CS42L43_MCU_CMD_TIMEOUT_US 20000
#define CS42L43_MCU_UPDATE_FORMAT 3
#define CS42L43_MCU_UPDATE_OFFSET 0x100000
-#define CS42L43_MCU_UPDATE_TIMEOUT 500000
+#define CS42L43_MCU_UPDATE_TIMEOUT_US 500000
#define CS42L43_MCU_UPDATE_RETRIES 5
#define CS42L43_MCU_SUPPORTED_REV 0x2105
#define CS42L43_MCU_SHADOW_REGS_REQUIRED_REV 0x2200
#define CS42L43_MCU_SUPPORTED_BIOS_REV 0x0001
-#define CS42L43_VDDP_DELAY 50
-#define CS42L43_VDDD_DELAY 1000
+#define CS42L43_VDDP_DELAY_US 50
+#define CS42L43_VDDD_DELAY_US 1000
-#define CS42L43_AUTOSUSPEND_TIME 250
+#define CS42L43_AUTOSUSPEND_TIME_MS 250
struct cs42l43_patch_header {
__le16 version;
@@ -538,10 +538,10 @@ static int cs42l43_soft_reset(struct cs42l43 *cs42l43)
regcache_cache_only(cs42l43->regmap, true);
regmap_multi_reg_write_bypassed(cs42l43->regmap, reset, ARRAY_SIZE(reset));
- msleep(CS42L43_RESET_DELAY);
+ msleep(CS42L43_RESET_DELAY_MS);
if (cs42l43->sdw) {
- unsigned long timeout = msecs_to_jiffies(CS42L43_SDW_DETACH_TIMEOUT);
+ unsigned long timeout = msecs_to_jiffies(CS42L43_SDW_DETACH_TIMEOUT_MS);
unsigned long time;
time = wait_for_completion_timeout(&cs42l43->device_detach, timeout);
@@ -561,7 +561,7 @@ static int cs42l43_soft_reset(struct cs42l43 *cs42l43)
static int cs42l43_wait_for_attach(struct cs42l43 *cs42l43)
{
if (!cs42l43->attached) {
- unsigned long timeout = msecs_to_jiffies(CS42L43_SDW_ATTACH_TIMEOUT);
+ unsigned long timeout = msecs_to_jiffies(CS42L43_SDW_ATTACH_TIMEOUT_MS);
unsigned long time;
time = wait_for_completion_timeout(&cs42l43->device_attach, timeout);
@@ -603,7 +603,7 @@ static int cs42l43_mcu_stage_2_3(struct cs42l43 *cs42l43, bool shadow)
ret = regmap_read_poll_timeout(cs42l43->regmap, CS42L43_BOOT_STATUS,
val, (val == CS42L43_MCU_BOOT_STAGE3),
- CS42L43_MCU_POLL, CS42L43_MCU_CMD_TIMEOUT);
+ CS42L43_MCU_POLL_US, CS42L43_MCU_CMD_TIMEOUT_US);
if (ret) {
dev_err(cs42l43->dev, "Failed to move to stage 3: %d, 0x%x\n", ret, val);
return ret;
@@ -652,7 +652,7 @@ static int cs42l43_mcu_disable(struct cs42l43 *cs42l43)
ret = regmap_read_poll_timeout(cs42l43->regmap, CS42L43_SOFT_INT_SHADOW, val,
(val & CS42L43_CONTROL_APPLIED_INT_MASK),
- CS42L43_MCU_POLL, CS42L43_MCU_CMD_TIMEOUT);
+ CS42L43_MCU_POLL_US, CS42L43_MCU_CMD_TIMEOUT_US);
if (ret) {
dev_err(cs42l43->dev, "Failed to disable firmware: %d, 0x%x\n", ret, val);
return ret;
@@ -696,7 +696,7 @@ static void cs42l43_mcu_load_firmware(const struct firmware *firmware, void *con
ret = regmap_read_poll_timeout(cs42l43->regmap, CS42L43_SOFT_INT_SHADOW, val,
(val & CS42L43_PATCH_APPLIED_INT_MASK),
- CS42L43_MCU_POLL, CS42L43_MCU_UPDATE_TIMEOUT);
+ CS42L43_MCU_POLL_US, CS42L43_MCU_UPDATE_TIMEOUT_US);
if (ret) {
dev_err(cs42l43->dev, "Failed to update firmware: %d, 0x%x\n", ret, val);
cs42l43->firmware_error = ret;
@@ -957,7 +957,7 @@ static int cs42l43_power_up(struct cs42l43 *cs42l43)
}
/* vdd-p must be on for 50uS before any other supply */
- usleep_range(CS42L43_VDDP_DELAY, 2 * CS42L43_VDDP_DELAY);
+ usleep_range(CS42L43_VDDP_DELAY_US, 2 * CS42L43_VDDP_DELAY_US);
gpiod_set_value_cansleep(cs42l43->reset, 1);
@@ -973,7 +973,7 @@ static int cs42l43_power_up(struct cs42l43 *cs42l43)
goto err_core_supplies;
}
- usleep_range(CS42L43_VDDD_DELAY, 2 * CS42L43_VDDD_DELAY);
+ usleep_range(CS42L43_VDDD_DELAY_US, 2 * CS42L43_VDDD_DELAY_US);
return 0;
@@ -1057,7 +1057,7 @@ int cs42l43_dev_probe(struct cs42l43 *cs42l43)
if (ret)
return ret;
- pm_runtime_set_autosuspend_delay(cs42l43->dev, CS42L43_AUTOSUSPEND_TIME);
+ pm_runtime_set_autosuspend_delay(cs42l43->dev, CS42L43_AUTOSUSPEND_TIME_MS);
pm_runtime_use_autosuspend(cs42l43->dev);
pm_runtime_set_active(cs42l43->dev);
/*
--
2.30.2
next prev parent reply other threads:[~2024-01-25 10:26 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-25 10:25 [PATCH v3 1/6] spi: cs42l43: Tidy up header includes Charles Keepax
2024-01-25 10:25 ` [PATCH v3 2/6] mfd: " Charles Keepax
2024-01-25 13:55 ` Lee Jones
2024-01-25 18:54 ` Andy Shevchenko
2024-01-26 9:06 ` Lee Jones
2024-01-25 18:52 ` Andy Shevchenko
2024-01-25 10:25 ` [PATCH v3 3/6] mfd: cs42l43: Use __u8 type rather than u8 for firmware interface Charles Keepax
2024-01-25 10:25 ` Charles Keepax [this message]
2024-01-25 18:49 ` [PATCH v3 4/6] mfd: cs42l43: Add time postfixes on defines Andy Shevchenko
2024-01-25 10:25 ` [PATCH v3 5/6] mfd: cs42l43: Add some missing dev_err_probe()s Charles Keepax
2024-01-25 10:25 ` [PATCH v3 6/6] mfd: cs42l43: Handle error from devm_pm_runtime_enable() Charles Keepax
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240125102555.2621736-4-ckeepax@opensource.cirrus.com \
--to=ckeepax@opensource.cirrus.com \
--cc=andy.shevchenko@gmail.com \
--cc=broonie@kernel.org \
--cc=lee@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).