linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Théo Lebrun" <theo.lebrun@bootlin.com>
To: Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	Vaishnav Achath <vaishnav.a@ti.com>,
	 Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
	 Rob Herring <robh@kernel.org>
Cc: linux-spi@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-mips@vger.kernel.org,
	"Vladimir Kondratiev" <vladimir.kondratiev@mobileye.com>,
	"Gregory CLEMENT" <gregory.clement@bootlin.com>,
	"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
	"Tawfik Bayouk" <tawfik.bayouk@mobileye.com>,
	"Théo Lebrun" <theo.lebrun@bootlin.com>
Subject: [PATCH v4 3/6] spi: cadence-qspi: add early busywait to cqspi_wait_for_bit()
Date: Tue, 23 Apr 2024 12:01:42 +0200	[thread overview]
Message-ID: <20240423-cdns-qspi-mbly-v4-3-3d2a7b535ad0@bootlin.com> (raw)
In-Reply-To: <20240423-cdns-qspi-mbly-v4-0-3d2a7b535ad0@bootlin.com>

Call readl_relaxed_poll_timeout() with no sleep at the start of
cqspi_wait_for_bit(). If its short timeout expires, a sleeping
readl_relaxed_poll_timeout() call takes the relay.

The reason is to avoid hrtimer interrupts on the system. All read
operations are expected to take less than 100µs.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
 drivers/spi/spi-cadence-quadspi.c | 31 +++++++++++++++++++++++--------
 1 file changed, 23 insertions(+), 8 deletions(-)

diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c
index a82e23526a6f..87c88ee708e4 100644
--- a/drivers/spi/spi-cadence-quadspi.c
+++ b/drivers/spi/spi-cadence-quadspi.c
@@ -120,6 +120,7 @@ struct cqspi_driver_platdata {
 /* Operation timeout value */
 #define CQSPI_TIMEOUT_MS			500
 #define CQSPI_READ_TIMEOUT_MS			10
+#define CQSPI_BUSYWAIT_TIMEOUT_US		500
 
 /* Runtime_pm autosuspend delay */
 #define CQSPI_AUTOSUSPEND_TIMEOUT		2000
@@ -298,13 +299,27 @@ struct cqspi_driver_platdata {
 
 #define CQSPI_REG_VERSAL_DMA_VAL		0x602
 
-static int cqspi_wait_for_bit(void __iomem *reg, const u32 mask, bool clr)
+static int cqspi_wait_for_bit(const struct cqspi_driver_platdata *ddata,
+			      void __iomem *reg, const u32 mask, bool clr,
+			      bool busywait)
 {
+	u64 timeout_us = CQSPI_TIMEOUT_MS * USEC_PER_MSEC;
 	u32 val;
 
+	if (busywait) {
+		int ret = readl_relaxed_poll_timeout(reg, val,
+						     (((clr ? ~val : val) & mask) == mask),
+						     0, CQSPI_BUSYWAIT_TIMEOUT_US);
+
+		if (ret != -ETIMEDOUT)
+			return ret;
+
+		timeout_us -= CQSPI_BUSYWAIT_TIMEOUT_US;
+	}
+
 	return readl_relaxed_poll_timeout(reg, val,
 					  (((clr ? ~val : val) & mask) == mask),
-					  10, CQSPI_TIMEOUT_MS * 1000);
+					  10, timeout_us);
 }
 
 static bool cqspi_is_idle(struct cqspi_st *cqspi)
@@ -434,8 +449,8 @@ static int cqspi_exec_flash_cmd(struct cqspi_st *cqspi, unsigned int reg)
 	writel(reg, reg_base + CQSPI_REG_CMDCTRL);
 
 	/* Polling for completion. */
-	ret = cqspi_wait_for_bit(reg_base + CQSPI_REG_CMDCTRL,
-				 CQSPI_REG_CMDCTRL_INPROGRESS_MASK, 1);
+	ret = cqspi_wait_for_bit(cqspi->ddata, reg_base + CQSPI_REG_CMDCTRL,
+				 CQSPI_REG_CMDCTRL_INPROGRESS_MASK, 1, true);
 	if (ret) {
 		dev_err(&cqspi->pdev->dev,
 			"Flash command execution timed out.\n");
@@ -790,8 +805,8 @@ static int cqspi_indirect_read_execute(struct cqspi_flash_pdata *f_pdata,
 	}
 
 	/* Check indirect done status */
-	ret = cqspi_wait_for_bit(reg_base + CQSPI_REG_INDIRECTRD,
-				 CQSPI_REG_INDIRECTRD_DONE_MASK, 0);
+	ret = cqspi_wait_for_bit(cqspi->ddata, reg_base + CQSPI_REG_INDIRECTRD,
+				 CQSPI_REG_INDIRECTRD_DONE_MASK, 0, true);
 	if (ret) {
 		dev_err(dev, "Indirect read completion error (%i)\n", ret);
 		goto failrd;
@@ -1091,8 +1106,8 @@ static int cqspi_indirect_write_execute(struct cqspi_flash_pdata *f_pdata,
 	}
 
 	/* Check indirect done status */
-	ret = cqspi_wait_for_bit(reg_base + CQSPI_REG_INDIRECTWR,
-				 CQSPI_REG_INDIRECTWR_DONE_MASK, 0);
+	ret = cqspi_wait_for_bit(cqspi->ddata, reg_base + CQSPI_REG_INDIRECTWR,
+				 CQSPI_REG_INDIRECTWR_DONE_MASK, 0, false);
 	if (ret) {
 		dev_err(dev, "Indirect write completion error (%i)\n", ret);
 		goto failwr;

-- 
2.44.0


  parent reply	other threads:[~2024-04-23 10:01 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-23 10:01 [PATCH v4 0/6] spi: cadence-qspi: add Mobileye EyeQ5 support Théo Lebrun
2024-04-23 10:01 ` [PATCH v4 1/6] spi: cadence-qspi: allow FIFO depth detection Théo Lebrun
2024-04-23 10:01 ` [PATCH v4 2/6] spi: cadence-qspi: add no-IRQ mode to indirect reads Théo Lebrun
2024-04-23 10:01 ` Théo Lebrun [this message]
2024-04-23 10:01 ` [PATCH v4 4/6] spi: cadence-qspi: add mobileye,eyeq5-ospi compatible Théo Lebrun
2024-04-23 10:01 ` [PATCH v4 5/6] MIPS: mobileye: eyeq5: Add SPI-NOR controller node Théo Lebrun
2024-04-23 10:01 ` [PATCH v4 6/6] MIPS: mobileye: eyeq5: add octal flash node to eval board DTS Théo Lebrun
2024-04-29 15:37 ` (subset) [PATCH v4 0/6] spi: cadence-qspi: add Mobileye EyeQ5 support Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240423-cdns-qspi-mbly-v4-3-3d2a7b535ad0@bootlin.com \
    --to=theo.lebrun@bootlin.com \
    --cc=broonie@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregory.clement@bootlin.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    --cc=tawfik.bayouk@mobileye.com \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=tsbogend@alpha.franken.de \
    --cc=vaishnav.a@ti.com \
    --cc=vladimir.kondratiev@mobileye.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).