* [PATCH v5 1/7] spi: dt-bindings: Introduce qcom,spi-qpic-snand
2024-05-08 8:36 [PATCH v5 0/7] Add QPIC SPI NAND driver Md Sadre Alam
@ 2024-05-08 8:36 ` Md Sadre Alam
2024-05-08 8:36 ` [PATCH v5 2/7] mtd: rawnand: qcom: cleanup qcom_nandc driver Md Sadre Alam
` (5 subsequent siblings)
6 siblings, 0 replies; 16+ messages in thread
From: Md Sadre Alam @ 2024-05-08 8:36 UTC (permalink / raw)
To: broonie, robh, krzk+dt, conor+dt, andersson, konrad.dybcio,
miquel.raynal, richard, vigneshr, manivannan.sadhasivam,
linux-arm-msm, linux-spi, devicetree, linux-kernel, linux-mtd
Cc: quic_srichara, quic_varada, quic_mdalam, Krzysztof Kozlowski,
Alexandru Gagniuc
Document the QPIC-SPI-NAND flash controller present in the IPQ SoCs.
It can work both in serial and parallel mode and supports typical
SPI-NAND page cache operations.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
---
Change in [v5]
* No change
Change in [v4]
* Fix spelling mistake in HW description
* Added commit message
* Removed '|' from description
* Removed minItems in clock
* Added blank line
* Removed co-developed by
Change in [v3]
* Updated commit message, removed "dt-bindings" from commit
message
* Updated compatible name as file name
* Added hardware description
* Documented clock-name
* Moved dma-names property to top
* Droped unused label "qpic_nand"
* Fixed indentation in example dt node
Change in [v2]
* Added initial support for dt-bindings
Change in [v1]
* This patch was not included in [v1]
.../bindings/spi/qcom,spi-qpic-snand.yaml | 83 +++++++++++++++++++
1 file changed, 83 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/qcom,spi-qpic-snand.yaml
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qpic-snand.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qpic-snand.yaml
new file mode 100644
index 000000000000..f0d9f7643849
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qpic-snand.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/qcom,spi-qpic-snand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QPIC NAND controller
+
+maintainers:
+ - Md sadre Alam <quic_mdalam@quicinc.com>
+
+description:
+ The QCOM QPIC-SPI-NAND flash controller is an extended version of
+ the QCOM QPIC NAND flash controller. It can work both in serial
+ and parallel mode. It supports typical SPI-NAND page cache
+ operations in single, dual or quad IO mode with pipelined ECC
+ encoding/decoding using the QPIC ECC HW engine.
+
+allOf:
+ - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - qcom,spi-qpic-snand
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 3
+
+ clock-names:
+ items:
+ - const: core
+ - const: aon
+ - const: iom
+
+ dmas:
+ items:
+ - description: tx DMA channel
+ - description: rx DMA channel
+ - description: cmd DMA channel
+
+ dma-names:
+ items:
+ - const: tx
+ - const: rx
+ - const: cmd
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,ipq9574-gcc.h>
+ spi@79b0000 {
+ compatible = "qcom,spi-qpic-snand";
+ reg = <0x1ac00000 0x800>;
+
+ clocks = <&gcc GCC_QPIC_CLK>,
+ <&gcc GCC_QPIC_AHB_CLK>,
+ <&gcc GCC_QPIC_IO_MACRO_CLK>;
+ clock-names = "core", "aon", "iom";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ flash@0 {
+ compatible = "spi-nand";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ nand-ecc-engine = <&qpic_nand>;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ };
+ };
--
2.34.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v5 2/7] mtd: rawnand: qcom: cleanup qcom_nandc driver
2024-05-08 8:36 [PATCH v5 0/7] Add QPIC SPI NAND driver Md Sadre Alam
2024-05-08 8:36 ` [PATCH v5 1/7] spi: dt-bindings: Introduce qcom,spi-qpic-snand Md Sadre Alam
@ 2024-05-08 8:36 ` Md Sadre Alam
2024-05-08 8:36 ` [PATCH v5 3/7] mtd: rawnand: qcom: Add qcom prefix to common api Md Sadre Alam
` (4 subsequent siblings)
6 siblings, 0 replies; 16+ messages in thread
From: Md Sadre Alam @ 2024-05-08 8:36 UTC (permalink / raw)
To: broonie, robh, krzk+dt, conor+dt, andersson, konrad.dybcio,
miquel.raynal, richard, vigneshr, manivannan.sadhasivam,
linux-arm-msm, linux-spi, devicetree, linux-kernel, linux-mtd
Cc: quic_srichara, quic_varada, quic_mdalam
cleanup qcom_nandc driver as below
- Remove register value indirection api
- Remove set_reg() api
- Convert read_loc_first & read_loc_last macro to function
- Renamed multiple variables
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
---
Change in [v5]
* Cleand up raw nand driver.
* Removed register value indirection
* Removed set_reg() api.
Change in [v4]
* This patch was not included in [v4]
Change in [v3]
* This patch was not included in [v3]
Change in [v2]
* This patch was not included in [v2]
Change in [v1]
* This patch was not included in [v1]
drivers/mtd/nand/raw/qcom_nandc.c | 451 +++++++++++++-----------------
1 file changed, 198 insertions(+), 253 deletions(-)
diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index b8cff9240b28..6c886a72f5e4 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -189,17 +189,6 @@
#define ECC_BCH_4BIT BIT(2)
#define ECC_BCH_8BIT BIT(3)
-#define nandc_set_read_loc_first(chip, reg, cw_offset, read_size, is_last_read_loc) \
-nandc_set_reg(chip, reg, \
- ((cw_offset) << READ_LOCATION_OFFSET) | \
- ((read_size) << READ_LOCATION_SIZE) | \
- ((is_last_read_loc) << READ_LOCATION_LAST))
-
-#define nandc_set_read_loc_last(chip, reg, cw_offset, read_size, is_last_read_loc) \
-nandc_set_reg(chip, reg, \
- ((cw_offset) << READ_LOCATION_OFFSET) | \
- ((read_size) << READ_LOCATION_SIZE) | \
- ((is_last_read_loc) << READ_LOCATION_LAST))
/*
* Returns the actual register address for all NAND_DEV_ registers
* (i.e. NAND_DEV_CMD0, NAND_DEV_CMD1, NAND_DEV_CMD2 and NAND_DEV_CMD_VLD)
@@ -257,8 +246,6 @@ nandc_set_reg(chip, reg, \
* @tx_sgl_start - start index in data sgl for tx.
* @rx_sgl_pos - current index in data sgl for rx.
* @rx_sgl_start - start index in data sgl for rx.
- * @wait_second_completion - wait for second DMA desc completion before making
- * the NAND transfer completion.
*/
struct bam_transaction {
struct bam_cmd_element *bam_ce;
@@ -275,7 +262,6 @@ struct bam_transaction {
u32 tx_sgl_start;
u32 rx_sgl_pos;
u32 rx_sgl_start;
- bool wait_second_completion;
};
/*
@@ -549,17 +535,17 @@ struct qcom_nand_host {
* among different NAND controllers.
* @ecc_modes - ecc mode for NAND
* @dev_cmd_reg_start - NAND_DEV_CMD_* registers starting offset
- * @is_bam - whether NAND controller is using BAM
- * @is_qpic - whether NAND CTRL is part of qpic IP
- * @qpic_v2 - flag to indicate QPIC IP version 2
+ * @supports_bam - whether NAND controller is using BAM
+ * @nandc_part_of_qpic - whether NAND controller is part of qpic IP
+ * @qpic_version2 - flag to indicate QPIC IP version 2
* @use_codeword_fixup - whether NAND has different layout for boot partitions
*/
struct qcom_nandc_props {
u32 ecc_modes;
u32 dev_cmd_reg_start;
- bool is_bam;
- bool is_qpic;
- bool qpic_v2;
+ bool supports_bam;
+ bool nandc_part_of_qpic;
+ bool qpic_version2;
bool use_codeword_fixup;
};
@@ -613,19 +599,11 @@ static void clear_bam_transaction(struct qcom_nand_controller *nandc)
{
struct bam_transaction *bam_txn = nandc->bam_txn;
- if (!nandc->props->is_bam)
+ if (!nandc->props->supports_bam)
return;
- bam_txn->bam_ce_pos = 0;
- bam_txn->bam_ce_start = 0;
- bam_txn->cmd_sgl_pos = 0;
- bam_txn->cmd_sgl_start = 0;
- bam_txn->tx_sgl_pos = 0;
- bam_txn->tx_sgl_start = 0;
- bam_txn->rx_sgl_pos = 0;
- bam_txn->rx_sgl_start = 0;
+ memset(&bam_txn->bam_ce_pos, 0, sizeof(u32) * 8);
bam_txn->last_data_desc = NULL;
- bam_txn->wait_second_completion = false;
sg_init_table(bam_txn->cmd_sgl, nandc->max_cwperpage *
QPIC_PER_CW_CMD_SGL);
@@ -640,17 +618,7 @@ static void qpic_bam_dma_done(void *data)
{
struct bam_transaction *bam_txn = data;
- /*
- * In case of data transfer with NAND, 2 callbacks will be generated.
- * One for command channel and another one for data channel.
- * If current transaction has data descriptors
- * (i.e. wait_second_completion is true), then set this to false
- * and wait for second DMA descriptor completion.
- */
- if (bam_txn->wait_second_completion)
- bam_txn->wait_second_completion = false;
- else
- complete(&bam_txn->txn_done);
+ complete(&bam_txn->txn_done);
}
static inline struct qcom_nand_host *to_qcom_nand_host(struct nand_chip *chip)
@@ -676,10 +644,9 @@ static inline void nandc_write(struct qcom_nand_controller *nandc, int offset,
iowrite32(val, nandc->base + offset);
}
-static inline void nandc_read_buffer_sync(struct qcom_nand_controller *nandc,
- bool is_cpu)
+static inline void nandc_dev_to_mem(struct qcom_nand_controller *nandc, bool is_cpu)
{
- if (!nandc->props->is_bam)
+ if (!nandc->props->supports_bam)
return;
if (is_cpu)
@@ -694,77 +661,67 @@ static inline void nandc_read_buffer_sync(struct qcom_nand_controller *nandc,
DMA_FROM_DEVICE);
}
-static __le32 *offset_to_nandc_reg(struct nandc_regs *regs, int offset)
-{
- switch (offset) {
- case NAND_FLASH_CMD:
- return ®s->cmd;
- case NAND_ADDR0:
- return ®s->addr0;
- case NAND_ADDR1:
- return ®s->addr1;
- case NAND_FLASH_CHIP_SELECT:
- return ®s->chip_sel;
- case NAND_EXEC_CMD:
- return ®s->exec;
- case NAND_FLASH_STATUS:
- return ®s->clrflashstatus;
- case NAND_DEV0_CFG0:
- return ®s->cfg0;
- case NAND_DEV0_CFG1:
- return ®s->cfg1;
- case NAND_DEV0_ECC_CFG:
- return ®s->ecc_bch_cfg;
- case NAND_READ_STATUS:
- return ®s->clrreadstatus;
- case NAND_DEV_CMD1:
- return ®s->cmd1;
- case NAND_DEV_CMD1_RESTORE:
- return ®s->orig_cmd1;
- case NAND_DEV_CMD_VLD:
- return ®s->vld;
- case NAND_DEV_CMD_VLD_RESTORE:
- return ®s->orig_vld;
- case NAND_EBI2_ECC_BUF_CFG:
- return ®s->ecc_buf_cfg;
- case NAND_READ_LOCATION_0:
- return ®s->read_location0;
- case NAND_READ_LOCATION_1:
- return ®s->read_location1;
- case NAND_READ_LOCATION_2:
- return ®s->read_location2;
- case NAND_READ_LOCATION_3:
- return ®s->read_location3;
- case NAND_READ_LOCATION_LAST_CW_0:
- return ®s->read_location_last0;
- case NAND_READ_LOCATION_LAST_CW_1:
- return ®s->read_location_last1;
- case NAND_READ_LOCATION_LAST_CW_2:
- return ®s->read_location_last2;
- case NAND_READ_LOCATION_LAST_CW_3:
- return ®s->read_location_last3;
- default:
- return NULL;
- }
+/* Helper to check the code word, whether it is last cw or not */
+static bool qcom_nandc_is_last_cw(struct nand_ecc_ctrl *ecc, int cw)
+{
+ return cw == (ecc->steps - 1);
}
-static void nandc_set_reg(struct nand_chip *chip, int offset,
- u32 val)
+/**
+ * nandc_set_read_loc_first() - to set read location first register
+ * @reg_base: location register base
+ * @cw_offset: code word offset
+ * @read_size: code word read length
+ * @is_last_read_loc: is this the last read location
+ *
+ * This function will set location register value
+ */
+static void nandc_set_read_loc_first(struct nand_chip *chip,
+ int reg_base, int cw_offset,
+ int read_size, int is_last_read_loc)
+{
+ struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+ int val = (((cw_offset) << READ_LOCATION_OFFSET) |
+ ((read_size) << READ_LOCATION_SIZE) |
+ ((is_last_read_loc) << READ_LOCATION_LAST));
+
+ if (reg_base == NAND_READ_LOCATION_0)
+ nandc->regs->read_location0 = val;
+ else if (reg_base == NAND_READ_LOCATION_1)
+ nandc->regs->read_location1 = val;
+ else if (reg_base == NAND_READ_LOCATION_2)
+ nandc->regs->read_location2 = val;
+ else if (reg_base == NAND_READ_LOCATION_3)
+ nandc->regs->read_location3 = val;
+}
+
+/**
+ * nandc_set_read_loc_last - to set read location last register
+ * @reg_base: location register base
+ * @cw_offset: code word offset
+ * @read_size: code word read length
+ * @is_last_read_loc: is this the last read location
+ *
+ * This function will set location last register value
+ */
+static void nandc_set_read_loc_last(struct nand_chip *chip,
+ int reg_base, int cw_offset,
+ int read_size, int is_last_read_loc)
{
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
- struct nandc_regs *regs = nandc->regs;
- __le32 *reg;
-
- reg = offset_to_nandc_reg(regs, offset);
- if (reg)
- *reg = cpu_to_le32(val);
-}
+ int val = (((cw_offset) << READ_LOCATION_OFFSET) |
+ ((read_size) << READ_LOCATION_SIZE) |
+ ((is_last_read_loc) << READ_LOCATION_LAST));
-/* Helper to check the code word, whether it is last cw or not */
-static bool qcom_nandc_is_last_cw(struct nand_ecc_ctrl *ecc, int cw)
-{
- return cw == (ecc->steps - 1);
+ if (reg_base == NAND_READ_LOCATION_LAST_CW_0)
+ nandc->regs->read_location_last0 = val;
+ else if (reg_base == NAND_READ_LOCATION_LAST_CW_1)
+ nandc->regs->read_location_last1 = val;
+ else if (reg_base == NAND_READ_LOCATION_LAST_CW_2)
+ nandc->regs->read_location_last2 = val;
+ else if (reg_base == NAND_READ_LOCATION_LAST_CW_3)
+ nandc->regs->read_location_last3 = val;
}
/* helper to configure location register values */
@@ -775,12 +732,12 @@ static void nandc_set_read_loc(struct nand_chip *chip, int cw, int reg,
struct nand_ecc_ctrl *ecc = &chip->ecc;
int reg_base = NAND_READ_LOCATION_0;
- if (nandc->props->qpic_v2 && qcom_nandc_is_last_cw(ecc, cw))
+ if (nandc->props->qpic_version2 && qcom_nandc_is_last_cw(ecc, cw))
reg_base = NAND_READ_LOCATION_LAST_CW_0;
reg_base += reg * 4;
- if (nandc->props->qpic_v2 && qcom_nandc_is_last_cw(ecc, cw))
+ if (nandc->props->qpic_version2 && qcom_nandc_is_last_cw(ecc, cw))
return nandc_set_read_loc_last(chip, reg_base, cw_offset,
read_size, is_last_read_loc);
else
@@ -792,12 +749,13 @@ static void nandc_set_read_loc(struct nand_chip *chip, int cw, int reg,
static void set_address(struct qcom_nand_host *host, u16 column, int page)
{
struct nand_chip *chip = &host->chip;
+ struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
if (chip->options & NAND_BUSWIDTH_16)
column >>= 1;
- nandc_set_reg(chip, NAND_ADDR0, page << 16 | column);
- nandc_set_reg(chip, NAND_ADDR1, page >> 16 & 0xff);
+ nandc->regs->addr0 = page << 16 | column;
+ nandc->regs->addr1 = page >> 16 & 0xff;
}
/*
@@ -837,15 +795,17 @@ static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read, i
ecc_bch_cfg = 1 << ECC_CFG_ECC_DISABLE;
}
- nandc_set_reg(chip, NAND_FLASH_CMD, cmd);
- nandc_set_reg(chip, NAND_DEV0_CFG0, cfg0);
- nandc_set_reg(chip, NAND_DEV0_CFG1, cfg1);
- nandc_set_reg(chip, NAND_DEV0_ECC_CFG, ecc_bch_cfg);
- if (!nandc->props->qpic_v2)
- nandc_set_reg(chip, NAND_EBI2_ECC_BUF_CFG, host->ecc_buf_cfg);
- nandc_set_reg(chip, NAND_FLASH_STATUS, host->clrflashstatus);
- nandc_set_reg(chip, NAND_READ_STATUS, host->clrreadstatus);
- nandc_set_reg(chip, NAND_EXEC_CMD, 1);
+ nandc->regs->cmd = cmd;
+ nandc->regs->cfg0 = cfg0;
+ nandc->regs->cfg1 = cfg1;
+ nandc->regs->ecc_bch_cfg = ecc_bch_cfg;
+
+ if (!nandc->props->qpic_version2)
+ nandc->regs->ecc_buf_cfg = host->ecc_buf_cfg;
+
+ nandc->regs->clrflashstatus = host->clrflashstatus;
+ nandc->regs->clrreadstatus = host->clrreadstatus;
+ nandc->regs->exec = 1;
if (read)
nandc_set_read_loc(chip, cw, 0, 0, host->use_ecc ?
@@ -1121,7 +1081,7 @@ static int read_reg_dma(struct qcom_nand_controller *nandc, int first,
if (first == NAND_DEV_CMD_VLD || first == NAND_DEV_CMD1)
first = dev_cmd_reg_addr(nandc, first);
- if (nandc->props->is_bam)
+ if (nandc->props->supports_bam)
return prep_bam_dma_desc_cmd(nandc, true, first, vaddr,
num_regs, flags);
@@ -1136,25 +1096,16 @@ static int read_reg_dma(struct qcom_nand_controller *nandc, int first,
* write_reg_dma: prepares a descriptor to write a given number of
* contiguous registers
*
+ * @vaddr: contnigeous memory from where register value will
+ * be written
* @first: offset of the first register in the contiguous block
* @num_regs: number of registers to write
* @flags: flags to control DMA descriptor preparation
*/
-static int write_reg_dma(struct qcom_nand_controller *nandc, int first,
- int num_regs, unsigned int flags)
+static int write_reg_dma(struct qcom_nand_controller *nandc, __le32 *vaddr,
+ int first, int num_regs, unsigned int flags)
{
bool flow_control = false;
- struct nandc_regs *regs = nandc->regs;
- void *vaddr;
-
- vaddr = offset_to_nandc_reg(regs, first);
-
- if (first == NAND_ERASED_CW_DETECT_CFG) {
- if (flags & NAND_ERASED_CW_SET)
- vaddr = ®s->erased_cw_detect_cfg_set;
- else
- vaddr = ®s->erased_cw_detect_cfg_clr;
- }
if (first == NAND_EXEC_CMD)
flags |= NAND_BAM_NWD;
@@ -1165,7 +1116,7 @@ static int write_reg_dma(struct qcom_nand_controller *nandc, int first,
if (first == NAND_DEV_CMD_VLD_RESTORE || first == NAND_DEV_CMD_VLD)
first = dev_cmd_reg_addr(nandc, NAND_DEV_CMD_VLD);
- if (nandc->props->is_bam)
+ if (nandc->props->supports_bam)
return prep_bam_dma_desc_cmd(nandc, false, first, vaddr,
num_regs, flags);
@@ -1188,7 +1139,7 @@ static int write_reg_dma(struct qcom_nand_controller *nandc, int first,
static int read_data_dma(struct qcom_nand_controller *nandc, int reg_off,
const u8 *vaddr, int size, unsigned int flags)
{
- if (nandc->props->is_bam)
+ if (nandc->props->supports_bam)
return prep_bam_dma_desc_data(nandc, true, vaddr, size, flags);
return prep_adm_dma_desc(nandc, true, reg_off, vaddr, size, false);
@@ -1206,7 +1157,7 @@ static int read_data_dma(struct qcom_nand_controller *nandc, int reg_off,
static int write_data_dma(struct qcom_nand_controller *nandc, int reg_off,
const u8 *vaddr, int size, unsigned int flags)
{
- if (nandc->props->is_bam)
+ if (nandc->props->supports_bam)
return prep_bam_dma_desc_data(nandc, false, vaddr, size, flags);
return prep_adm_dma_desc(nandc, false, reg_off, vaddr, size, false);
@@ -1220,13 +1171,14 @@ static void config_nand_page_read(struct nand_chip *chip)
{
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
- write_reg_dma(nandc, NAND_ADDR0, 2, 0);
- write_reg_dma(nandc, NAND_DEV0_CFG0, 3, 0);
- if (!nandc->props->qpic_v2)
- write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1, 0);
- write_reg_dma(nandc, NAND_ERASED_CW_DETECT_CFG, 1, 0);
- write_reg_dma(nandc, NAND_ERASED_CW_DETECT_CFG, 1,
- NAND_ERASED_CW_SET | NAND_BAM_NEXT_SGL);
+ write_reg_dma(nandc, &nandc->regs->addr0, NAND_ADDR0, 2, 0);
+ write_reg_dma(nandc, &nandc->regs->cfg0, NAND_DEV0_CFG0, 3, 0);
+ if (!nandc->props->qpic_version2)
+ write_reg_dma(nandc, &nandc->regs->ecc_buf_cfg, NAND_EBI2_ECC_BUF_CFG, 1, 0);
+ write_reg_dma(nandc, &nandc->regs->erased_cw_detect_cfg_clr,
+ NAND_ERASED_CW_DETECT_CFG, 1, 0);
+ write_reg_dma(nandc, &nandc->regs->erased_cw_detect_cfg_set,
+ NAND_ERASED_CW_DETECT_CFG, 1, NAND_ERASED_CW_SET | NAND_BAM_NEXT_SGL);
}
/*
@@ -1239,16 +1191,16 @@ config_nand_cw_read(struct nand_chip *chip, bool use_ecc, int cw)
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
- int reg = NAND_READ_LOCATION_0;
+ __le32 *reg = &nandc->regs->read_location0;
- if (nandc->props->qpic_v2 && qcom_nandc_is_last_cw(ecc, cw))
- reg = NAND_READ_LOCATION_LAST_CW_0;
+ if (nandc->props->qpic_version2 && qcom_nandc_is_last_cw(ecc, cw))
+ reg = &nandc->regs->read_location_last0;
- if (nandc->props->is_bam)
- write_reg_dma(nandc, reg, 4, NAND_BAM_NEXT_SGL);
+ if (nandc->props->supports_bam)
+ write_reg_dma(nandc, reg, NAND_READ_LOCATION_0, 4, NAND_BAM_NEXT_SGL);
- write_reg_dma(nandc, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL);
- write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
+ write_reg_dma(nandc, &nandc->regs->cmd, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL);
+ write_reg_dma(nandc, &nandc->regs->exec, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
if (use_ecc) {
read_reg_dma(nandc, NAND_FLASH_STATUS, 2, 0);
@@ -1279,10 +1231,10 @@ static void config_nand_page_write(struct nand_chip *chip)
{
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
- write_reg_dma(nandc, NAND_ADDR0, 2, 0);
- write_reg_dma(nandc, NAND_DEV0_CFG0, 3, 0);
- if (!nandc->props->qpic_v2)
- write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1,
+ write_reg_dma(nandc, &nandc->regs->addr0, NAND_ADDR0, 2, 0);
+ write_reg_dma(nandc, &nandc->regs->cfg0, NAND_DEV0_CFG0, 3, 0);
+ if (!nandc->props->qpic_version2)
+ write_reg_dma(nandc, &nandc->regs->ecc_buf_cfg, NAND_EBI2_ECC_BUF_CFG, 1,
NAND_BAM_NEXT_SGL);
}
@@ -1294,13 +1246,13 @@ static void config_nand_cw_write(struct nand_chip *chip)
{
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
- write_reg_dma(nandc, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL);
- write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
+ write_reg_dma(nandc, &nandc->regs->cmd, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL);
+ write_reg_dma(nandc, &nandc->regs->exec, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
read_reg_dma(nandc, NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL);
- write_reg_dma(nandc, NAND_FLASH_STATUS, 1, 0);
- write_reg_dma(nandc, NAND_READ_STATUS, 1, NAND_BAM_NEXT_SGL);
+ write_reg_dma(nandc, &nandc->regs->clrflashstatus, NAND_FLASH_STATUS, 1, 0);
+ write_reg_dma(nandc, &nandc->regs->clrreadstatus, NAND_READ_STATUS, 1, NAND_BAM_NEXT_SGL);
}
/* helpers to submit/free our list of dma descriptors */
@@ -1311,7 +1263,7 @@ static int submit_descs(struct qcom_nand_controller *nandc)
struct bam_transaction *bam_txn = nandc->bam_txn;
int ret = 0;
- if (nandc->props->is_bam) {
+ if (nandc->props->supports_bam) {
if (bam_txn->rx_sgl_pos > bam_txn->rx_sgl_start) {
ret = prepare_bam_async_desc(nandc, nandc->rx_chan, 0);
if (ret)
@@ -1336,14 +1288,9 @@ static int submit_descs(struct qcom_nand_controller *nandc)
list_for_each_entry(desc, &nandc->desc_list, node)
cookie = dmaengine_submit(desc->dma_desc);
- if (nandc->props->is_bam) {
+ if (nandc->props->supports_bam) {
bam_txn->last_cmd_desc->callback = qpic_bam_dma_done;
bam_txn->last_cmd_desc->callback_param = bam_txn;
- if (bam_txn->last_data_desc) {
- bam_txn->last_data_desc->callback = qpic_bam_dma_done;
- bam_txn->last_data_desc->callback_param = bam_txn;
- bam_txn->wait_second_completion = true;
- }
dma_async_issue_pending(nandc->tx_chan);
dma_async_issue_pending(nandc->rx_chan);
@@ -1365,7 +1312,7 @@ static int submit_descs(struct qcom_nand_controller *nandc)
list_for_each_entry_safe(desc, n, &nandc->desc_list, node) {
list_del(&desc->node);
- if (nandc->props->is_bam)
+ if (nandc->props->supports_bam)
dma_unmap_sg(nandc->dev, desc->bam_sgl,
desc->sgl_cnt, desc->dir);
else
@@ -1382,7 +1329,7 @@ static int submit_descs(struct qcom_nand_controller *nandc)
static void clear_read_regs(struct qcom_nand_controller *nandc)
{
nandc->reg_read_pos = 0;
- nandc_read_buffer_sync(nandc, false);
+ nandc_dev_to_mem(nandc, false);
}
/*
@@ -1446,7 +1393,7 @@ static int check_flash_errors(struct qcom_nand_host *host, int cw_cnt)
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
int i;
- nandc_read_buffer_sync(nandc, true);
+ nandc_dev_to_mem(nandc, true);
for (i = 0; i < cw_cnt; i++) {
u32 flash = le32_to_cpu(nandc->reg_read_buf[i]);
@@ -1476,7 +1423,7 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip,
clear_read_regs(nandc);
host->use_ecc = false;
- if (nandc->props->qpic_v2)
+ if (nandc->props->qpic_version2)
raw_cw = ecc->steps - 1;
clear_bam_transaction(nandc);
@@ -1497,7 +1444,7 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip,
oob_size2 = host->ecc_bytes_hw + host->spare_bytes;
}
- if (nandc->props->is_bam) {
+ if (nandc->props->supports_bam) {
nandc_set_read_loc(chip, cw, 0, read_loc, data_size1, 0);
read_loc += data_size1;
@@ -1621,7 +1568,7 @@ static int parse_read_errors(struct qcom_nand_host *host, u8 *data_buf,
u8 *data_buf_start = data_buf, *oob_buf_start = oob_buf;
buf = (struct read_stats *)nandc->reg_read_buf;
- nandc_read_buffer_sync(nandc, true);
+ nandc_dev_to_mem(nandc, true);
for (i = 0; i < ecc->steps; i++, buf++) {
u32 flash, buffer, erased_cw;
@@ -1734,7 +1681,7 @@ static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf,
oob_size = host->ecc_bytes_hw + host->spare_bytes;
}
- if (nandc->props->is_bam) {
+ if (nandc->props->supports_bam) {
if (data_buf && oob_buf) {
nandc_set_read_loc(chip, i, 0, 0, data_size, 0);
nandc_set_read_loc(chip, i, 1, data_size,
@@ -2455,14 +2402,14 @@ static int qcom_nand_attach_chip(struct nand_chip *chip)
mtd_set_ooblayout(mtd, &qcom_nand_ooblayout_ops);
/* Free the initially allocated BAM transaction for reading the ONFI params */
- if (nandc->props->is_bam)
+ if (nandc->props->supports_bam)
free_bam_transaction(nandc);
nandc->max_cwperpage = max_t(unsigned int, nandc->max_cwperpage,
cwperpage);
/* Now allocate the BAM transaction based on updated max_cwperpage */
- if (nandc->props->is_bam) {
+ if (nandc->props->supports_bam) {
nandc->bam_txn = alloc_bam_transaction(nandc);
if (!nandc->bam_txn) {
dev_err(nandc->dev,
@@ -2522,7 +2469,7 @@ static int qcom_nand_attach_chip(struct nand_chip *chip)
| ecc_mode << ECC_MODE
| host->ecc_bytes_hw << ECC_PARITY_SIZE_BYTES_BCH;
- if (!nandc->props->qpic_v2)
+ if (!nandc->props->qpic_version2)
host->ecc_buf_cfg = 0x203 << NUM_STEPS;
host->clrflashstatus = FS_READY_BSY_N;
@@ -2556,7 +2503,7 @@ static int qcom_op_cmd_mapping(struct nand_chip *chip, u8 opcode,
cmd = OP_FETCH_ID;
break;
case NAND_CMD_PARAM:
- if (nandc->props->qpic_v2)
+ if (nandc->props->qpic_version2)
cmd = OP_PAGE_READ_ONFI_READ;
else
cmd = OP_PAGE_READ;
@@ -2663,7 +2610,7 @@ static int qcom_wait_rdy_poll(struct nand_chip *chip, unsigned int time_ms)
unsigned long start = jiffies + msecs_to_jiffies(time_ms);
u32 flash;
- nandc_read_buffer_sync(nandc, true);
+ nandc_dev_to_mem(nandc, true);
do {
flash = le32_to_cpu(nandc->reg_read_buf[0]);
@@ -2706,11 +2653,11 @@ static int qcom_read_status_exec(struct nand_chip *chip,
clear_read_regs(nandc);
clear_bam_transaction(nandc);
- nandc_set_reg(chip, NAND_FLASH_CMD, q_op.cmd_reg);
- nandc_set_reg(chip, NAND_EXEC_CMD, 1);
+ nandc->regs->cmd = q_op.cmd_reg;
+ nandc->regs->exec = 1;
- write_reg_dma(nandc, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL);
- write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
+ write_reg_dma(nandc, &nandc->regs->cmd, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL);
+ write_reg_dma(nandc, &nandc->regs->exec, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
read_reg_dma(nandc, NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL);
ret = submit_descs(nandc);
@@ -2719,7 +2666,7 @@ static int qcom_read_status_exec(struct nand_chip *chip,
goto err_out;
}
- nandc_read_buffer_sync(nandc, true);
+ nandc_dev_to_mem(nandc, true);
for (i = 0; i < num_cw; i++) {
flash_status = le32_to_cpu(nandc->reg_read_buf[i]);
@@ -2763,16 +2710,14 @@ static int qcom_read_id_type_exec(struct nand_chip *chip, const struct nand_subo
clear_read_regs(nandc);
clear_bam_transaction(nandc);
- nandc_set_reg(chip, NAND_FLASH_CMD, q_op.cmd_reg);
- nandc_set_reg(chip, NAND_ADDR0, q_op.addr1_reg);
- nandc_set_reg(chip, NAND_ADDR1, q_op.addr2_reg);
- nandc_set_reg(chip, NAND_FLASH_CHIP_SELECT,
- nandc->props->is_bam ? 0 : DM_EN);
-
- nandc_set_reg(chip, NAND_EXEC_CMD, 1);
+ nandc->regs->cmd = q_op.cmd_reg;
+ nandc->regs->addr0 = q_op.addr1_reg;
+ nandc->regs->addr1 = q_op.addr2_reg;
+ nandc->regs->chip_sel = nandc->props->supports_bam ? 0 : DM_EN;
+ nandc->regs->exec = 1;
- write_reg_dma(nandc, NAND_FLASH_CMD, 4, NAND_BAM_NEXT_SGL);
- write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
+ write_reg_dma(nandc, &nandc->regs->cmd, NAND_FLASH_CMD, 4, NAND_BAM_NEXT_SGL);
+ write_reg_dma(nandc, &nandc->regs->exec, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
read_reg_dma(nandc, NAND_READ_ID, 1, NAND_BAM_NEXT_SGL);
@@ -2786,7 +2731,7 @@ static int qcom_read_id_type_exec(struct nand_chip *chip, const struct nand_subo
op_id = q_op.data_instr_idx;
len = nand_subop_get_data_len(subop, op_id);
- nandc_read_buffer_sync(nandc, true);
+ nandc_dev_to_mem(nandc, true);
memcpy(instr->ctx.data.buf.in, nandc->reg_read_buf, len);
err_out:
@@ -2809,11 +2754,10 @@ static int qcom_misc_cmd_type_exec(struct nand_chip *chip, const struct nand_sub
goto wait_rdy;
} else if (q_op.cmd_reg == OP_BLOCK_ERASE) {
q_op.cmd_reg |= PAGE_ACC | LAST_PAGE;
- nandc_set_reg(chip, NAND_ADDR0, q_op.addr1_reg);
- nandc_set_reg(chip, NAND_ADDR1, q_op.addr2_reg);
- nandc_set_reg(chip, NAND_DEV0_CFG0,
- host->cfg0_raw & ~(7 << CW_PER_PAGE));
- nandc_set_reg(chip, NAND_DEV0_CFG1, host->cfg1_raw);
+ nandc->regs->addr0 = q_op.addr1_reg;
+ nandc->regs->addr1 = q_op.addr2_reg;
+ nandc->regs->cfg0 = host->cfg0_raw & ~(7 << CW_PER_PAGE);
+ nandc->regs->cfg1 = host->cfg1_raw;
instrs = 3;
} else if (q_op.cmd_reg != OP_RESET_DEVICE) {
return 0;
@@ -2826,14 +2770,14 @@ static int qcom_misc_cmd_type_exec(struct nand_chip *chip, const struct nand_sub
clear_read_regs(nandc);
clear_bam_transaction(nandc);
- nandc_set_reg(chip, NAND_FLASH_CMD, q_op.cmd_reg);
- nandc_set_reg(chip, NAND_EXEC_CMD, 1);
+ nandc->regs->cmd = q_op.cmd_reg;
+ nandc->regs->exec = 1;
- write_reg_dma(nandc, NAND_FLASH_CMD, instrs, NAND_BAM_NEXT_SGL);
+ write_reg_dma(nandc, &nandc->regs->cmd, NAND_FLASH_CMD, instrs, NAND_BAM_NEXT_SGL);
if (q_op.cmd_reg == OP_BLOCK_ERASE)
- write_reg_dma(nandc, NAND_DEV0_CFG0, 2, NAND_BAM_NEXT_SGL);
+ write_reg_dma(nandc, &nandc->regs->cfg0, NAND_DEV0_CFG0, 2, NAND_BAM_NEXT_SGL);
- write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
+ write_reg_dma(nandc, &nandc->regs->exec, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
read_reg_dma(nandc, NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL);
ret = submit_descs(nandc);
@@ -2872,38 +2816,38 @@ static int qcom_param_page_type_exec(struct nand_chip *chip, const struct nand_
clear_read_regs(nandc);
clear_bam_transaction(nandc);
- nandc_set_reg(chip, NAND_FLASH_CMD, q_op.cmd_reg);
-
- nandc_set_reg(chip, NAND_ADDR0, 0);
- nandc_set_reg(chip, NAND_ADDR1, 0);
- nandc_set_reg(chip, NAND_DEV0_CFG0, 0 << CW_PER_PAGE
- | 512 << UD_SIZE_BYTES
- | 5 << NUM_ADDR_CYCLES
- | 0 << SPARE_SIZE_BYTES);
- nandc_set_reg(chip, NAND_DEV0_CFG1, 7 << NAND_RECOVERY_CYCLES
- | 0 << CS_ACTIVE_BSY
- | 17 << BAD_BLOCK_BYTE_NUM
- | 1 << BAD_BLOCK_IN_SPARE_AREA
- | 2 << WR_RD_BSY_GAP
- | 0 << WIDE_FLASH
- | 1 << DEV0_CFG1_ECC_DISABLE);
- if (!nandc->props->qpic_v2)
- nandc_set_reg(chip, NAND_EBI2_ECC_BUF_CFG, 1 << ECC_CFG_ECC_DISABLE);
+ nandc->regs->cmd = q_op.cmd_reg;
+ nandc->regs->addr0 = 0;
+ nandc->regs->addr1 = 0;
+
+ nandc->regs->cfg0 = 0 << CW_PER_PAGE
+ | 512 << UD_SIZE_BYTES
+ | 5 << NUM_ADDR_CYCLES
+ | 0 << SPARE_SIZE_BYTES;
+
+ nandc->regs->cfg1 = 7 << NAND_RECOVERY_CYCLES
+ | 0 << CS_ACTIVE_BSY
+ | 17 << BAD_BLOCK_BYTE_NUM
+ | 1 << BAD_BLOCK_IN_SPARE_AREA
+ | 2 << WR_RD_BSY_GAP
+ | 0 << WIDE_FLASH
+ | 1 << DEV0_CFG1_ECC_DISABLE;
+
+ if (!nandc->props->qpic_version2)
+ nandc->regs->ecc_buf_cfg = 1 << ECC_CFG_ECC_DISABLE;
/* configure CMD1 and VLD for ONFI param probing in QPIC v1 */
- if (!nandc->props->qpic_v2) {
- nandc_set_reg(chip, NAND_DEV_CMD_VLD,
- (nandc->vld & ~READ_START_VLD));
- nandc_set_reg(chip, NAND_DEV_CMD1,
- (nandc->cmd1 & ~(0xFF << READ_ADDR))
- | NAND_CMD_PARAM << READ_ADDR);
+ if (!nandc->props->qpic_version2) {
+ nandc->regs->vld = (nandc->vld & ~READ_START_VLD);
+ nandc->regs->cmd1 = (nandc->cmd1 & ~(0xFF << READ_ADDR))
+ | NAND_CMD_PARAM << READ_ADDR;
}
- nandc_set_reg(chip, NAND_EXEC_CMD, 1);
+ nandc->regs->exec = 1;
- if (!nandc->props->qpic_v2) {
- nandc_set_reg(chip, NAND_DEV_CMD1_RESTORE, nandc->cmd1);
- nandc_set_reg(chip, NAND_DEV_CMD_VLD_RESTORE, nandc->vld);
+ if (!nandc->props->qpic_version2) {
+ nandc->regs->orig_cmd1 = nandc->cmd1;
+ nandc->regs->orig_vld = nandc->vld;
}
instr = q_op.data_instr;
@@ -2912,9 +2856,9 @@ static int qcom_param_page_type_exec(struct nand_chip *chip, const struct nand_
nandc_set_read_loc(chip, 0, 0, 0, len, 1);
- if (!nandc->props->qpic_v2) {
- write_reg_dma(nandc, NAND_DEV_CMD_VLD, 1, 0);
- write_reg_dma(nandc, NAND_DEV_CMD1, 1, NAND_BAM_NEXT_SGL);
+ if (!nandc->props->qpic_version2) {
+ write_reg_dma(nandc, &nandc->regs->vld, NAND_DEV_CMD_VLD, 1, 0);
+ write_reg_dma(nandc, &nandc->regs->cmd1, NAND_DEV_CMD1, 1, NAND_BAM_NEXT_SGL);
}
nandc->buf_count = len;
@@ -2926,9 +2870,10 @@ static int qcom_param_page_type_exec(struct nand_chip *chip, const struct nand_
nandc->buf_count, 0);
/* restore CMD1 and VLD regs */
- if (!nandc->props->qpic_v2) {
- write_reg_dma(nandc, NAND_DEV_CMD1_RESTORE, 1, 0);
- write_reg_dma(nandc, NAND_DEV_CMD_VLD_RESTORE, 1, NAND_BAM_NEXT_SGL);
+ if (!nandc->props->qpic_version2) {
+ write_reg_dma(nandc, &nandc->regs->orig_cmd1, NAND_DEV_CMD1_RESTORE, 1, 0);
+ write_reg_dma(nandc, &nandc->regs->orig_vld, NAND_DEV_CMD_VLD_RESTORE, 1,
+ NAND_BAM_NEXT_SGL);
}
ret = submit_descs(nandc);
@@ -3017,7 +2962,7 @@ static const struct nand_controller_ops qcom_nandc_ops = {
static void qcom_nandc_unalloc(struct qcom_nand_controller *nandc)
{
- if (nandc->props->is_bam) {
+ if (nandc->props->supports_bam) {
if (!dma_mapping_error(nandc->dev, nandc->reg_read_dma))
dma_unmap_single(nandc->dev, nandc->reg_read_dma,
MAX_REG_RD *
@@ -3070,7 +3015,7 @@ static int qcom_nandc_alloc(struct qcom_nand_controller *nandc)
if (!nandc->reg_read_buf)
return -ENOMEM;
- if (nandc->props->is_bam) {
+ if (nandc->props->supports_bam) {
nandc->reg_read_dma =
dma_map_single(nandc->dev, nandc->reg_read_buf,
MAX_REG_RD *
@@ -3151,15 +3096,15 @@ static int qcom_nandc_setup(struct qcom_nand_controller *nandc)
u32 nand_ctrl;
/* kill onenand */
- if (!nandc->props->is_qpic)
+ if (!nandc->props->nandc_part_of_qpic)
nandc_write(nandc, SFLASHC_BURST_CFG, 0);
- if (!nandc->props->qpic_v2)
+ if (!nandc->props->qpic_version2)
nandc_write(nandc, dev_cmd_reg_addr(nandc, NAND_DEV_CMD_VLD),
NAND_DEV_CMD_VLD_VAL);
/* enable ADM or BAM DMA */
- if (nandc->props->is_bam) {
+ if (nandc->props->supports_bam) {
nand_ctrl = nandc_read(nandc, NAND_CTRL);
/*
@@ -3176,7 +3121,7 @@ static int qcom_nandc_setup(struct qcom_nand_controller *nandc)
}
/* save the original values of these registers */
- if (!nandc->props->qpic_v2) {
+ if (!nandc->props->qpic_version2) {
nandc->cmd1 = nandc_read(nandc, dev_cmd_reg_addr(nandc, NAND_DEV_CMD1));
nandc->vld = NAND_DEV_CMD_VLD_VAL;
}
@@ -3349,7 +3294,7 @@ static int qcom_nandc_parse_dt(struct platform_device *pdev)
struct device_node *np = nandc->dev->of_node;
int ret;
- if (!nandc->props->is_bam) {
+ if (!nandc->props->supports_bam) {
ret = of_property_read_u32(np, "qcom,cmd-crci",
&nandc->cmd_crci);
if (ret) {
@@ -3474,30 +3419,30 @@ static void qcom_nandc_remove(struct platform_device *pdev)
static const struct qcom_nandc_props ipq806x_nandc_props = {
.ecc_modes = (ECC_RS_4BIT | ECC_BCH_8BIT),
- .is_bam = false,
+ .supports_bam = false,
.use_codeword_fixup = true,
.dev_cmd_reg_start = 0x0,
};
static const struct qcom_nandc_props ipq4019_nandc_props = {
.ecc_modes = (ECC_BCH_4BIT | ECC_BCH_8BIT),
- .is_bam = true,
- .is_qpic = true,
+ .supports_bam = true,
+ .nandc_part_of_qpic = true,
.dev_cmd_reg_start = 0x0,
};
static const struct qcom_nandc_props ipq8074_nandc_props = {
.ecc_modes = (ECC_BCH_4BIT | ECC_BCH_8BIT),
- .is_bam = true,
- .is_qpic = true,
+ .supports_bam = true,
+ .nandc_part_of_qpic = true,
.dev_cmd_reg_start = 0x7000,
};
static const struct qcom_nandc_props sdx55_nandc_props = {
.ecc_modes = (ECC_BCH_4BIT | ECC_BCH_8BIT),
- .is_bam = true,
- .is_qpic = true,
- .qpic_v2 = true,
+ .supports_bam = true,
+ .nandc_part_of_qpic = true,
+ .qpic_version2 = true,
.dev_cmd_reg_start = 0x7000,
};
--
2.34.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v5 3/7] mtd: rawnand: qcom: Add qcom prefix to common api
2024-05-08 8:36 [PATCH v5 0/7] Add QPIC SPI NAND driver Md Sadre Alam
2024-05-08 8:36 ` [PATCH v5 1/7] spi: dt-bindings: Introduce qcom,spi-qpic-snand Md Sadre Alam
2024-05-08 8:36 ` [PATCH v5 2/7] mtd: rawnand: qcom: cleanup qcom_nandc driver Md Sadre Alam
@ 2024-05-08 8:36 ` Md Sadre Alam
2024-05-08 8:36 ` [PATCH v5 4/7] drivers: mtd: nand: Add qpic_common API file Md Sadre Alam
` (3 subsequent siblings)
6 siblings, 0 replies; 16+ messages in thread
From: Md Sadre Alam @ 2024-05-08 8:36 UTC (permalink / raw)
To: broonie, robh, krzk+dt, conor+dt, andersson, konrad.dybcio,
miquel.raynal, richard, vigneshr, manivannan.sadhasivam,
linux-arm-msm, linux-spi, devicetree, linux-kernel, linux-mtd
Cc: quic_srichara, quic_varada, quic_mdalam
Add qcom prefix to all the api which will be commonly
used by spi nand driver and raw nand driver.
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
---
Change in [v5]
* Add qcom_ prefix to all common API.
Change in [v4]
* This patch was not included in [v4]
Change in [v3]
* This patch was not included in [v3]
Change in [v2]
* This patch was not included in [v2]
Change in [v1]
* This patch was not included in [v1]
drivers/mtd/nand/raw/qcom_nandc.c | 322 +++++++++++++++---------------
1 file changed, 159 insertions(+), 163 deletions(-)
diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index 6c886a72f5e4..d958b8fb5b68 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -53,7 +53,7 @@
#define NAND_READ_LOCATION_LAST_CW_2 0xf48
#define NAND_READ_LOCATION_LAST_CW_3 0xf4c
-/* dummy register offsets, used by write_reg_dma */
+/* dummy register offsets, used by qcom_write_reg_dma */
#define NAND_DEV_CMD1_RESTORE 0xdead
#define NAND_DEV_CMD_VLD_RESTORE 0xbeef
@@ -211,7 +211,7 @@
/*
* Flags used in DMA descriptor preparation helper functions
- * (i.e. read_reg_dma/write_reg_dma/read_data_dma/write_data_dma)
+ * (i.e. qcom_read_reg_dma/qcom_write_reg_dma/qcom_read_data_dma/qcom_write_data_dma)
*/
/* Don't set the EOT in current tx BAM sgl */
#define NAND_BAM_NO_EOT BIT(0)
@@ -550,7 +550,7 @@ struct qcom_nandc_props {
};
/* Frees the BAM transaction memory */
-static void free_bam_transaction(struct qcom_nand_controller *nandc)
+static void qcom_free_bam_transaction(struct qcom_nand_controller *nandc)
{
struct bam_transaction *bam_txn = nandc->bam_txn;
@@ -559,7 +559,7 @@ static void free_bam_transaction(struct qcom_nand_controller *nandc)
/* Allocates and Initializes the BAM transaction */
static struct bam_transaction *
-alloc_bam_transaction(struct qcom_nand_controller *nandc)
+qcom_alloc_bam_transaction(struct qcom_nand_controller *nandc)
{
struct bam_transaction *bam_txn;
size_t bam_txn_size;
@@ -595,7 +595,7 @@ alloc_bam_transaction(struct qcom_nand_controller *nandc)
}
/* Clears the BAM transaction indexes */
-static void clear_bam_transaction(struct qcom_nand_controller *nandc)
+static void qcom_clear_bam_transaction(struct qcom_nand_controller *nandc)
{
struct bam_transaction *bam_txn = nandc->bam_txn;
@@ -614,7 +614,7 @@ static void clear_bam_transaction(struct qcom_nand_controller *nandc)
}
/* Callback for DMA descriptor completion */
-static void qpic_bam_dma_done(void *data)
+static void qcom_qpic_bam_dma_done(void *data)
{
struct bam_transaction *bam_txn = data;
@@ -644,7 +644,7 @@ static inline void nandc_write(struct qcom_nand_controller *nandc, int offset,
iowrite32(val, nandc->base + offset);
}
-static inline void nandc_dev_to_mem(struct qcom_nand_controller *nandc, bool is_cpu)
+static inline void qcom_nandc_dev_to_mem(struct qcom_nand_controller *nandc, bool is_cpu)
{
if (!nandc->props->supports_bam)
return;
@@ -817,9 +817,8 @@ static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read, i
* for BAM. This descriptor will be added in the NAND DMA descriptor queue
* which will be submitted to DMA engine.
*/
-static int prepare_bam_async_desc(struct qcom_nand_controller *nandc,
- struct dma_chan *chan,
- unsigned long flags)
+static int qcom_prepare_bam_async_desc(struct qcom_nand_controller *nandc,
+ struct dma_chan *chan, unsigned long flags)
{
struct desc_info *desc;
struct scatterlist *sgl;
@@ -896,9 +895,9 @@ static int prepare_bam_async_desc(struct qcom_nand_controller *nandc,
* NAND_BAM_NEXT_SGL will be used for starting the separate SGL
* after the current command element.
*/
-static int prep_bam_dma_desc_cmd(struct qcom_nand_controller *nandc, bool read,
- int reg_off, const void *vaddr,
- int size, unsigned int flags)
+static int qcom_prep_bam_dma_desc_cmd(struct qcom_nand_controller *nandc, bool read,
+ int reg_off, const void *vaddr,
+ int size, unsigned int flags)
{
int bam_ce_size;
int i, ret;
@@ -936,9 +935,8 @@ static int prep_bam_dma_desc_cmd(struct qcom_nand_controller *nandc, bool read,
bam_txn->bam_ce_start = bam_txn->bam_ce_pos;
if (flags & NAND_BAM_NWD) {
- ret = prepare_bam_async_desc(nandc, nandc->cmd_chan,
- DMA_PREP_FENCE |
- DMA_PREP_CMD);
+ ret = qcom_prepare_bam_async_desc(nandc, nandc->cmd_chan,
+ DMA_PREP_FENCE | DMA_PREP_CMD);
if (ret)
return ret;
}
@@ -951,9 +949,8 @@ static int prep_bam_dma_desc_cmd(struct qcom_nand_controller *nandc, bool read,
* Prepares the data descriptor for BAM DMA which will be used for NAND
* data reads and writes.
*/
-static int prep_bam_dma_desc_data(struct qcom_nand_controller *nandc, bool read,
- const void *vaddr,
- int size, unsigned int flags)
+static int qcom_prep_bam_dma_desc_data(struct qcom_nand_controller *nandc, bool read,
+ const void *vaddr, int size, unsigned int flags)
{
int ret;
struct bam_transaction *bam_txn = nandc->bam_txn;
@@ -972,8 +969,8 @@ static int prep_bam_dma_desc_data(struct qcom_nand_controller *nandc, bool read,
* is not set, form the DMA descriptor
*/
if (!(flags & NAND_BAM_NO_EOT)) {
- ret = prepare_bam_async_desc(nandc, nandc->tx_chan,
- DMA_PREP_INTERRUPT);
+ ret = qcom_prepare_bam_async_desc(nandc, nandc->tx_chan,
+ DMA_PREP_INTERRUPT);
if (ret)
return ret;
}
@@ -982,9 +979,9 @@ static int prep_bam_dma_desc_data(struct qcom_nand_controller *nandc, bool read,
return 0;
}
-static int prep_adm_dma_desc(struct qcom_nand_controller *nandc, bool read,
- int reg_off, const void *vaddr, int size,
- bool flow_control)
+static int qcom_prep_adm_dma_desc(struct qcom_nand_controller *nandc, bool read,
+ int reg_off, const void *vaddr, int size,
+ bool flow_control)
{
struct desc_info *desc;
struct dma_async_tx_descriptor *dma_desc;
@@ -1062,15 +1059,15 @@ static int prep_adm_dma_desc(struct qcom_nand_controller *nandc, bool read,
}
/*
- * read_reg_dma: prepares a descriptor to read a given number of
+ * qcom_read_reg_dma: prepares a descriptor to read a given number of
* contiguous registers to the reg_read_buf pointer
*
* @first: offset of the first register in the contiguous block
* @num_regs: number of registers to read
* @flags: flags to control DMA descriptor preparation
*/
-static int read_reg_dma(struct qcom_nand_controller *nandc, int first,
- int num_regs, unsigned int flags)
+static int qcom_read_reg_dma(struct qcom_nand_controller *nandc, int first,
+ int num_regs, unsigned int flags)
{
bool flow_control = false;
void *vaddr;
@@ -1082,18 +1079,18 @@ static int read_reg_dma(struct qcom_nand_controller *nandc, int first,
first = dev_cmd_reg_addr(nandc, first);
if (nandc->props->supports_bam)
- return prep_bam_dma_desc_cmd(nandc, true, first, vaddr,
+ return qcom_prep_bam_dma_desc_cmd(nandc, true, first, vaddr,
num_regs, flags);
if (first == NAND_READ_ID || first == NAND_FLASH_STATUS)
flow_control = true;
- return prep_adm_dma_desc(nandc, true, first, vaddr,
- num_regs * sizeof(u32), flow_control);
+ return qcom_prep_adm_dma_desc(nandc, true, first, vaddr,
+ num_regs * sizeof(u32), flow_control);
}
/*
- * write_reg_dma: prepares a descriptor to write a given number of
+ * qcom_write_reg_dma: prepares a descriptor to write a given number of
* contiguous registers
*
* @vaddr: contnigeous memory from where register value will
@@ -1102,8 +1099,8 @@ static int read_reg_dma(struct qcom_nand_controller *nandc, int first,
* @num_regs: number of registers to write
* @flags: flags to control DMA descriptor preparation
*/
-static int write_reg_dma(struct qcom_nand_controller *nandc, __le32 *vaddr,
- int first, int num_regs, unsigned int flags)
+static int qcom_write_reg_dma(struct qcom_nand_controller *nandc, __le32 *vaddr,
+ int first, int num_regs, unsigned int flags)
{
bool flow_control = false;
@@ -1117,18 +1114,18 @@ static int write_reg_dma(struct qcom_nand_controller *nandc, __le32 *vaddr,
first = dev_cmd_reg_addr(nandc, NAND_DEV_CMD_VLD);
if (nandc->props->supports_bam)
- return prep_bam_dma_desc_cmd(nandc, false, first, vaddr,
- num_regs, flags);
+ return qcom_prep_bam_dma_desc_cmd(nandc, false, first, vaddr,
+ num_regs, flags);
if (first == NAND_FLASH_CMD)
flow_control = true;
- return prep_adm_dma_desc(nandc, false, first, vaddr,
- num_regs * sizeof(u32), flow_control);
+ return qcom_prep_adm_dma_desc(nandc, false, first, vaddr,
+ num_regs * sizeof(u32), flow_control);
}
/*
- * read_data_dma: prepares a DMA descriptor to transfer data from the
+ * qcom_read_data_dma: prepares a DMA descriptor to transfer data from the
* controller's internal buffer to the buffer 'vaddr'
*
* @reg_off: offset within the controller's data buffer
@@ -1136,17 +1133,17 @@ static int write_reg_dma(struct qcom_nand_controller *nandc, __le32 *vaddr,
* @size: DMA transaction size in bytes
* @flags: flags to control DMA descriptor preparation
*/
-static int read_data_dma(struct qcom_nand_controller *nandc, int reg_off,
- const u8 *vaddr, int size, unsigned int flags)
+static int qcom_read_data_dma(struct qcom_nand_controller *nandc, int reg_off,
+ const u8 *vaddr, int size, unsigned int flags)
{
if (nandc->props->supports_bam)
- return prep_bam_dma_desc_data(nandc, true, vaddr, size, flags);
+ return qcom_prep_bam_dma_desc_data(nandc, true, vaddr, size, flags);
- return prep_adm_dma_desc(nandc, true, reg_off, vaddr, size, false);
+ return qcom_prep_adm_dma_desc(nandc, true, reg_off, vaddr, size, false);
}
/*
- * write_data_dma: prepares a DMA descriptor to transfer data from
+ * qcom_write_data_dma: prepares a DMA descriptor to transfer data from
* 'vaddr' to the controller's internal buffer
*
* @reg_off: offset within the controller's data buffer
@@ -1154,13 +1151,13 @@ static int read_data_dma(struct qcom_nand_controller *nandc, int reg_off,
* @size: DMA transaction size in bytes
* @flags: flags to control DMA descriptor preparation
*/
-static int write_data_dma(struct qcom_nand_controller *nandc, int reg_off,
- const u8 *vaddr, int size, unsigned int flags)
+static int qcom_write_data_dma(struct qcom_nand_controller *nandc, int reg_off,
+ const u8 *vaddr, int size, unsigned int flags)
{
if (nandc->props->supports_bam)
- return prep_bam_dma_desc_data(nandc, false, vaddr, size, flags);
+ return qcom_prep_bam_dma_desc_data(nandc, false, vaddr, size, flags);
- return prep_adm_dma_desc(nandc, false, reg_off, vaddr, size, false);
+ return qcom_prep_adm_dma_desc(nandc, false, reg_off, vaddr, size, false);
}
/*
@@ -1171,14 +1168,14 @@ static void config_nand_page_read(struct nand_chip *chip)
{
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
- write_reg_dma(nandc, &nandc->regs->addr0, NAND_ADDR0, 2, 0);
- write_reg_dma(nandc, &nandc->regs->cfg0, NAND_DEV0_CFG0, 3, 0);
+ qcom_write_reg_dma(nandc, &nandc->regs->addr0, NAND_ADDR0, 2, 0);
+ qcom_write_reg_dma(nandc, &nandc->regs->cfg0, NAND_DEV0_CFG0, 3, 0);
if (!nandc->props->qpic_version2)
- write_reg_dma(nandc, &nandc->regs->ecc_buf_cfg, NAND_EBI2_ECC_BUF_CFG, 1, 0);
- write_reg_dma(nandc, &nandc->regs->erased_cw_detect_cfg_clr,
- NAND_ERASED_CW_DETECT_CFG, 1, 0);
- write_reg_dma(nandc, &nandc->regs->erased_cw_detect_cfg_set,
- NAND_ERASED_CW_DETECT_CFG, 1, NAND_ERASED_CW_SET | NAND_BAM_NEXT_SGL);
+ qcom_write_reg_dma(nandc, &nandc->regs->ecc_buf_cfg, NAND_EBI2_ECC_BUF_CFG, 1, 0);
+ qcom_write_reg_dma(nandc, &nandc->regs->erased_cw_detect_cfg_clr,
+ NAND_ERASED_CW_DETECT_CFG, 1, 0);
+ qcom_write_reg_dma(nandc, &nandc->regs->erased_cw_detect_cfg_set,
+ NAND_ERASED_CW_DETECT_CFG, 1, NAND_ERASED_CW_SET | NAND_BAM_NEXT_SGL);
}
/*
@@ -1197,17 +1194,17 @@ config_nand_cw_read(struct nand_chip *chip, bool use_ecc, int cw)
reg = &nandc->regs->read_location_last0;
if (nandc->props->supports_bam)
- write_reg_dma(nandc, reg, NAND_READ_LOCATION_0, 4, NAND_BAM_NEXT_SGL);
+ qcom_write_reg_dma(nandc, reg, NAND_READ_LOCATION_0, 4, NAND_BAM_NEXT_SGL);
- write_reg_dma(nandc, &nandc->regs->cmd, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL);
- write_reg_dma(nandc, &nandc->regs->exec, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
+ qcom_write_reg_dma(nandc, &nandc->regs->cmd, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL);
+ qcom_write_reg_dma(nandc, &nandc->regs->exec, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
if (use_ecc) {
- read_reg_dma(nandc, NAND_FLASH_STATUS, 2, 0);
- read_reg_dma(nandc, NAND_ERASED_CW_DETECT_STATUS, 1,
- NAND_BAM_NEXT_SGL);
+ qcom_read_reg_dma(nandc, NAND_FLASH_STATUS, 2, 0);
+ qcom_read_reg_dma(nandc, NAND_ERASED_CW_DETECT_STATUS, 1,
+ NAND_BAM_NEXT_SGL);
} else {
- read_reg_dma(nandc, NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL);
+ qcom_read_reg_dma(nandc, NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL);
}
}
@@ -1231,11 +1228,11 @@ static void config_nand_page_write(struct nand_chip *chip)
{
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
- write_reg_dma(nandc, &nandc->regs->addr0, NAND_ADDR0, 2, 0);
- write_reg_dma(nandc, &nandc->regs->cfg0, NAND_DEV0_CFG0, 3, 0);
+ qcom_write_reg_dma(nandc, &nandc->regs->addr0, NAND_ADDR0, 2, 0);
+ qcom_write_reg_dma(nandc, &nandc->regs->cfg0, NAND_DEV0_CFG0, 3, 0);
if (!nandc->props->qpic_version2)
- write_reg_dma(nandc, &nandc->regs->ecc_buf_cfg, NAND_EBI2_ECC_BUF_CFG, 1,
- NAND_BAM_NEXT_SGL);
+ qcom_write_reg_dma(nandc, &nandc->regs->ecc_buf_cfg, NAND_EBI2_ECC_BUF_CFG, 1,
+ NAND_BAM_NEXT_SGL);
}
/*
@@ -1246,17 +1243,18 @@ static void config_nand_cw_write(struct nand_chip *chip)
{
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
- write_reg_dma(nandc, &nandc->regs->cmd, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL);
- write_reg_dma(nandc, &nandc->regs->exec, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
+ qcom_write_reg_dma(nandc, &nandc->regs->cmd, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL);
+ qcom_write_reg_dma(nandc, &nandc->regs->exec, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
- read_reg_dma(nandc, NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL);
+ qcom_read_reg_dma(nandc, NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL);
- write_reg_dma(nandc, &nandc->regs->clrflashstatus, NAND_FLASH_STATUS, 1, 0);
- write_reg_dma(nandc, &nandc->regs->clrreadstatus, NAND_READ_STATUS, 1, NAND_BAM_NEXT_SGL);
+ qcom_write_reg_dma(nandc, &nandc->regs->clrflashstatus, NAND_FLASH_STATUS, 1, 0);
+ qcom_write_reg_dma(nandc, &nandc->regs->clrreadstatus, NAND_READ_STATUS, 1,
+ NAND_BAM_NEXT_SGL);
}
/* helpers to submit/free our list of dma descriptors */
-static int submit_descs(struct qcom_nand_controller *nandc)
+static int qcom_submit_descs(struct qcom_nand_controller *nandc)
{
struct desc_info *desc, *n;
dma_cookie_t cookie = 0;
@@ -1265,21 +1263,21 @@ static int submit_descs(struct qcom_nand_controller *nandc)
if (nandc->props->supports_bam) {
if (bam_txn->rx_sgl_pos > bam_txn->rx_sgl_start) {
- ret = prepare_bam_async_desc(nandc, nandc->rx_chan, 0);
+ ret = qcom_prepare_bam_async_desc(nandc, nandc->rx_chan, 0);
if (ret)
goto err_unmap_free_desc;
}
if (bam_txn->tx_sgl_pos > bam_txn->tx_sgl_start) {
- ret = prepare_bam_async_desc(nandc, nandc->tx_chan,
- DMA_PREP_INTERRUPT);
+ ret = qcom_prepare_bam_async_desc(nandc, nandc->tx_chan,
+ DMA_PREP_INTERRUPT);
if (ret)
goto err_unmap_free_desc;
}
if (bam_txn->cmd_sgl_pos > bam_txn->cmd_sgl_start) {
- ret = prepare_bam_async_desc(nandc, nandc->cmd_chan,
- DMA_PREP_CMD);
+ ret = qcom_prepare_bam_async_desc(nandc, nandc->cmd_chan,
+ DMA_PREP_CMD);
if (ret)
goto err_unmap_free_desc;
}
@@ -1289,7 +1287,7 @@ static int submit_descs(struct qcom_nand_controller *nandc)
cookie = dmaengine_submit(desc->dma_desc);
if (nandc->props->supports_bam) {
- bam_txn->last_cmd_desc->callback = qpic_bam_dma_done;
+ bam_txn->last_cmd_desc->callback = qcom_qpic_bam_dma_done;
bam_txn->last_cmd_desc->callback_param = bam_txn;
dma_async_issue_pending(nandc->tx_chan);
@@ -1307,7 +1305,7 @@ static int submit_descs(struct qcom_nand_controller *nandc)
err_unmap_free_desc:
/*
* Unmap the dma sg_list and free the desc allocated by both
- * prepare_bam_async_desc() and prep_adm_dma_desc() functions.
+ * qcom_prepare_bam_async_desc() and qcom_prep_adm_dma_desc() functions.
*/
list_for_each_entry_safe(desc, n, &nandc->desc_list, node) {
list_del(&desc->node);
@@ -1326,10 +1324,10 @@ static int submit_descs(struct qcom_nand_controller *nandc)
}
/* reset the register read buffer for next NAND operation */
-static void clear_read_regs(struct qcom_nand_controller *nandc)
+static void qcom_clear_read_regs(struct qcom_nand_controller *nandc)
{
nandc->reg_read_pos = 0;
- nandc_dev_to_mem(nandc, false);
+ qcom_nandc_dev_to_mem(nandc, false);
}
/*
@@ -1393,7 +1391,7 @@ static int check_flash_errors(struct qcom_nand_host *host, int cw_cnt)
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
int i;
- nandc_dev_to_mem(nandc, true);
+ qcom_nandc_dev_to_mem(nandc, true);
for (i = 0; i < cw_cnt; i++) {
u32 flash = le32_to_cpu(nandc->reg_read_buf[i]);
@@ -1420,13 +1418,13 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip,
nand_read_page_op(chip, page, 0, NULL, 0);
nandc->buf_count = 0;
nandc->buf_start = 0;
- clear_read_regs(nandc);
+ qcom_clear_read_regs(nandc);
host->use_ecc = false;
if (nandc->props->qpic_version2)
raw_cw = ecc->steps - 1;
- clear_bam_transaction(nandc);
+ qcom_clear_bam_transaction(nandc);
set_address(host, host->cw_size * cw, page);
update_rw_regs(host, 1, true, raw_cw);
config_nand_page_read(chip);
@@ -1459,18 +1457,18 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip,
config_nand_cw_read(chip, false, raw_cw);
- read_data_dma(nandc, reg_off, data_buf, data_size1, 0);
+ qcom_read_data_dma(nandc, reg_off, data_buf, data_size1, 0);
reg_off += data_size1;
- read_data_dma(nandc, reg_off, oob_buf, oob_size1, 0);
+ qcom_read_data_dma(nandc, reg_off, oob_buf, oob_size1, 0);
reg_off += oob_size1;
- read_data_dma(nandc, reg_off, data_buf + data_size1, data_size2, 0);
+ qcom_read_data_dma(nandc, reg_off, data_buf + data_size1, data_size2, 0);
reg_off += data_size2;
- read_data_dma(nandc, reg_off, oob_buf + oob_size1, oob_size2, 0);
+ qcom_read_data_dma(nandc, reg_off, oob_buf + oob_size1, oob_size2, 0);
- ret = submit_descs(nandc);
+ ret = qcom_submit_descs(nandc);
if (ret) {
dev_err(nandc->dev, "failure to read raw cw %d\n", cw);
return ret;
@@ -1568,7 +1566,7 @@ static int parse_read_errors(struct qcom_nand_host *host, u8 *data_buf,
u8 *data_buf_start = data_buf, *oob_buf_start = oob_buf;
buf = (struct read_stats *)nandc->reg_read_buf;
- nandc_dev_to_mem(nandc, true);
+ qcom_nandc_dev_to_mem(nandc, true);
for (i = 0; i < ecc->steps; i++, buf++) {
u32 flash, buffer, erased_cw;
@@ -1697,8 +1695,8 @@ static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf,
config_nand_cw_read(chip, true, i);
if (data_buf)
- read_data_dma(nandc, FLASH_BUF_ACC, data_buf,
- data_size, 0);
+ qcom_read_data_dma(nandc, FLASH_BUF_ACC, data_buf,
+ data_size, 0);
/*
* when ecc is enabled, the controller doesn't read the real
@@ -1713,8 +1711,8 @@ static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf,
for (j = 0; j < host->bbm_size; j++)
*oob_buf++ = 0xff;
- read_data_dma(nandc, FLASH_BUF_ACC + data_size,
- oob_buf, oob_size, 0);
+ qcom_read_data_dma(nandc, FLASH_BUF_ACC + data_size,
+ oob_buf, oob_size, 0);
}
if (data_buf)
@@ -1723,7 +1721,7 @@ static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf,
oob_buf += oob_size;
}
- ret = submit_descs(nandc);
+ ret = qcom_submit_descs(nandc);
if (ret) {
dev_err(nandc->dev, "failure to read page/oob\n");
return ret;
@@ -1744,7 +1742,7 @@ static int copy_last_cw(struct qcom_nand_host *host, int page)
int size;
int ret;
- clear_read_regs(nandc);
+ qcom_clear_read_regs(nandc);
size = host->use_ecc ? host->cw_data : host->cw_size;
@@ -1756,9 +1754,9 @@ static int copy_last_cw(struct qcom_nand_host *host, int page)
config_nand_single_cw_page_read(chip, host->use_ecc, ecc->steps - 1);
- read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer, size, 0);
+ qcom_read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer, size, 0);
- ret = submit_descs(nandc);
+ ret = qcom_submit_descs(nandc);
if (ret)
dev_err(nandc->dev, "failed to copy last codeword\n");
@@ -1844,14 +1842,14 @@ static int qcom_nandc_read_page(struct nand_chip *chip, u8 *buf,
nandc->buf_count = 0;
nandc->buf_start = 0;
host->use_ecc = true;
- clear_read_regs(nandc);
+ qcom_clear_read_regs(nandc);
set_address(host, 0, page);
update_rw_regs(host, ecc->steps, true, 0);
data_buf = buf;
oob_buf = oob_required ? chip->oob_poi : NULL;
- clear_bam_transaction(nandc);
+ qcom_clear_bam_transaction(nandc);
return read_page_ecc(host, data_buf, oob_buf, page);
}
@@ -1892,8 +1890,8 @@ static int qcom_nandc_read_oob(struct nand_chip *chip, int page)
if (host->nr_boot_partitions)
qcom_nandc_codeword_fixup(host, page);
- clear_read_regs(nandc);
- clear_bam_transaction(nandc);
+ qcom_clear_read_regs(nandc);
+ qcom_clear_bam_transaction(nandc);
host->use_ecc = true;
set_address(host, 0, page);
@@ -1920,8 +1918,8 @@ static int qcom_nandc_write_page(struct nand_chip *chip, const u8 *buf,
set_address(host, 0, page);
nandc->buf_count = 0;
nandc->buf_start = 0;
- clear_read_regs(nandc);
- clear_bam_transaction(nandc);
+ qcom_clear_read_regs(nandc);
+ qcom_clear_bam_transaction(nandc);
data_buf = (u8 *)buf;
oob_buf = chip->oob_poi;
@@ -1942,8 +1940,8 @@ static int qcom_nandc_write_page(struct nand_chip *chip, const u8 *buf,
oob_size = ecc->bytes;
}
- write_data_dma(nandc, FLASH_BUF_ACC, data_buf, data_size,
- i == (ecc->steps - 1) ? NAND_BAM_NO_EOT : 0);
+ qcom_write_data_dma(nandc, FLASH_BUF_ACC, data_buf, data_size,
+ i == (ecc->steps - 1) ? NAND_BAM_NO_EOT : 0);
/*
* when ECC is enabled, we don't really need to write anything
@@ -1955,8 +1953,8 @@ static int qcom_nandc_write_page(struct nand_chip *chip, const u8 *buf,
if (qcom_nandc_is_last_cw(ecc, i)) {
oob_buf += host->bbm_size;
- write_data_dma(nandc, FLASH_BUF_ACC + data_size,
- oob_buf, oob_size, 0);
+ qcom_write_data_dma(nandc, FLASH_BUF_ACC + data_size,
+ oob_buf, oob_size, 0);
}
config_nand_cw_write(chip);
@@ -1965,7 +1963,7 @@ static int qcom_nandc_write_page(struct nand_chip *chip, const u8 *buf,
oob_buf += oob_size;
}
- ret = submit_descs(nandc);
+ ret = qcom_submit_descs(nandc);
if (ret) {
dev_err(nandc->dev, "failure to write page\n");
return ret;
@@ -1990,8 +1988,8 @@ static int qcom_nandc_write_page_raw(struct nand_chip *chip,
qcom_nandc_codeword_fixup(host, page);
nand_prog_page_begin_op(chip, page, 0, NULL, 0);
- clear_read_regs(nandc);
- clear_bam_transaction(nandc);
+ qcom_clear_read_regs(nandc);
+ qcom_clear_bam_transaction(nandc);
data_buf = (u8 *)buf;
oob_buf = chip->oob_poi;
@@ -2017,28 +2015,28 @@ static int qcom_nandc_write_page_raw(struct nand_chip *chip,
oob_size2 = host->ecc_bytes_hw + host->spare_bytes;
}
- write_data_dma(nandc, reg_off, data_buf, data_size1,
- NAND_BAM_NO_EOT);
+ qcom_write_data_dma(nandc, reg_off, data_buf, data_size1,
+ NAND_BAM_NO_EOT);
reg_off += data_size1;
data_buf += data_size1;
- write_data_dma(nandc, reg_off, oob_buf, oob_size1,
- NAND_BAM_NO_EOT);
+ qcom_write_data_dma(nandc, reg_off, oob_buf, oob_size1,
+ NAND_BAM_NO_EOT);
reg_off += oob_size1;
oob_buf += oob_size1;
- write_data_dma(nandc, reg_off, data_buf, data_size2,
- NAND_BAM_NO_EOT);
+ qcom_write_data_dma(nandc, reg_off, data_buf, data_size2,
+ NAND_BAM_NO_EOT);
reg_off += data_size2;
data_buf += data_size2;
- write_data_dma(nandc, reg_off, oob_buf, oob_size2, 0);
+ qcom_write_data_dma(nandc, reg_off, oob_buf, oob_size2, 0);
oob_buf += oob_size2;
config_nand_cw_write(chip);
}
- ret = submit_descs(nandc);
+ ret = qcom_submit_descs(nandc);
if (ret) {
dev_err(nandc->dev, "failure to write raw page\n");
return ret;
@@ -2068,7 +2066,7 @@ static int qcom_nandc_write_oob(struct nand_chip *chip, int page)
qcom_nandc_codeword_fixup(host, page);
host->use_ecc = true;
- clear_bam_transaction(nandc);
+ qcom_clear_bam_transaction(nandc);
/* calculate the data and oob size for the last codeword/step */
data_size = ecc->size - ((ecc->steps - 1) << 2);
@@ -2083,11 +2081,10 @@ static int qcom_nandc_write_oob(struct nand_chip *chip, int page)
update_rw_regs(host, 1, false, 0);
config_nand_page_write(chip);
- write_data_dma(nandc, FLASH_BUF_ACC,
- nandc->data_buffer, data_size + oob_size, 0);
+ qcom_write_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer, data_size + oob_size, 0);
config_nand_cw_write(chip);
- ret = submit_descs(nandc);
+ ret = qcom_submit_descs(nandc);
if (ret) {
dev_err(nandc->dev, "failure to write oob\n");
return ret;
@@ -2114,7 +2111,7 @@ static int qcom_nandc_block_bad(struct nand_chip *chip, loff_t ofs)
*/
host->use_ecc = false;
- clear_bam_transaction(nandc);
+ qcom_clear_bam_transaction(nandc);
ret = copy_last_cw(host, page);
if (ret)
goto err;
@@ -2141,8 +2138,8 @@ static int qcom_nandc_block_markbad(struct nand_chip *chip, loff_t ofs)
struct nand_ecc_ctrl *ecc = &chip->ecc;
int page, ret;
- clear_read_regs(nandc);
- clear_bam_transaction(nandc);
+ qcom_clear_read_regs(nandc);
+ qcom_clear_bam_transaction(nandc);
/*
* to mark the BBM as bad, we flash the entire last codeword with 0s.
@@ -2159,11 +2156,10 @@ static int qcom_nandc_block_markbad(struct nand_chip *chip, loff_t ofs)
update_rw_regs(host, 1, false, ecc->steps - 1);
config_nand_page_write(chip);
- write_data_dma(nandc, FLASH_BUF_ACC,
- nandc->data_buffer, host->cw_size, 0);
+ qcom_write_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer, host->cw_size, 0);
config_nand_cw_write(chip);
- ret = submit_descs(nandc);
+ ret = qcom_submit_descs(nandc);
if (ret) {
dev_err(nandc->dev, "failure to update BBM\n");
return ret;
@@ -2403,14 +2399,14 @@ static int qcom_nand_attach_chip(struct nand_chip *chip)
mtd_set_ooblayout(mtd, &qcom_nand_ooblayout_ops);
/* Free the initially allocated BAM transaction for reading the ONFI params */
if (nandc->props->supports_bam)
- free_bam_transaction(nandc);
+ qcom_free_bam_transaction(nandc);
nandc->max_cwperpage = max_t(unsigned int, nandc->max_cwperpage,
cwperpage);
/* Now allocate the BAM transaction based on updated max_cwperpage */
if (nandc->props->supports_bam) {
- nandc->bam_txn = alloc_bam_transaction(nandc);
+ nandc->bam_txn = qcom_alloc_bam_transaction(nandc);
if (!nandc->bam_txn) {
dev_err(nandc->dev,
"failed to allocate bam transaction\n");
@@ -2610,7 +2606,7 @@ static int qcom_wait_rdy_poll(struct nand_chip *chip, unsigned int time_ms)
unsigned long start = jiffies + msecs_to_jiffies(time_ms);
u32 flash;
- nandc_dev_to_mem(nandc, true);
+ qcom_nandc_dev_to_mem(nandc, true);
do {
flash = le32_to_cpu(nandc->reg_read_buf[0]);
@@ -2650,23 +2646,23 @@ static int qcom_read_status_exec(struct nand_chip *chip,
nandc->buf_start = 0;
host->use_ecc = false;
- clear_read_regs(nandc);
- clear_bam_transaction(nandc);
+ qcom_clear_read_regs(nandc);
+ qcom_clear_bam_transaction(nandc);
nandc->regs->cmd = q_op.cmd_reg;
nandc->regs->exec = 1;
- write_reg_dma(nandc, &nandc->regs->cmd, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL);
- write_reg_dma(nandc, &nandc->regs->exec, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
- read_reg_dma(nandc, NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL);
+ qcom_write_reg_dma(nandc, &nandc->regs->cmd, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL);
+ qcom_write_reg_dma(nandc, &nandc->regs->exec, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
+ qcom_read_reg_dma(nandc, NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL);
- ret = submit_descs(nandc);
+ ret = qcom_submit_descs(nandc);
if (ret) {
dev_err(nandc->dev, "failure in submitting status descriptor\n");
goto err_out;
}
- nandc_dev_to_mem(nandc, true);
+ qcom_nandc_dev_to_mem(nandc, true);
for (i = 0; i < num_cw; i++) {
flash_status = le32_to_cpu(nandc->reg_read_buf[i]);
@@ -2707,8 +2703,8 @@ static int qcom_read_id_type_exec(struct nand_chip *chip, const struct nand_subo
nandc->buf_start = 0;
host->use_ecc = false;
- clear_read_regs(nandc);
- clear_bam_transaction(nandc);
+ qcom_clear_read_regs(nandc);
+ qcom_clear_bam_transaction(nandc);
nandc->regs->cmd = q_op.cmd_reg;
nandc->regs->addr0 = q_op.addr1_reg;
@@ -2716,12 +2712,12 @@ static int qcom_read_id_type_exec(struct nand_chip *chip, const struct nand_subo
nandc->regs->chip_sel = nandc->props->supports_bam ? 0 : DM_EN;
nandc->regs->exec = 1;
- write_reg_dma(nandc, &nandc->regs->cmd, NAND_FLASH_CMD, 4, NAND_BAM_NEXT_SGL);
- write_reg_dma(nandc, &nandc->regs->exec, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
+ qcom_write_reg_dma(nandc, &nandc->regs->cmd, NAND_FLASH_CMD, 4, NAND_BAM_NEXT_SGL);
+ qcom_write_reg_dma(nandc, &nandc->regs->exec, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
- read_reg_dma(nandc, NAND_READ_ID, 1, NAND_BAM_NEXT_SGL);
+ qcom_read_reg_dma(nandc, NAND_READ_ID, 1, NAND_BAM_NEXT_SGL);
- ret = submit_descs(nandc);
+ ret = qcom_submit_descs(nandc);
if (ret) {
dev_err(nandc->dev, "failure in submitting read id descriptor\n");
goto err_out;
@@ -2731,7 +2727,7 @@ static int qcom_read_id_type_exec(struct nand_chip *chip, const struct nand_subo
op_id = q_op.data_instr_idx;
len = nand_subop_get_data_len(subop, op_id);
- nandc_dev_to_mem(nandc, true);
+ qcom_nandc_dev_to_mem(nandc, true);
memcpy(instr->ctx.data.buf.in, nandc->reg_read_buf, len);
err_out:
@@ -2767,20 +2763,21 @@ static int qcom_misc_cmd_type_exec(struct nand_chip *chip, const struct nand_sub
nandc->buf_start = 0;
host->use_ecc = false;
- clear_read_regs(nandc);
- clear_bam_transaction(nandc);
+ qcom_clear_read_regs(nandc);
+ qcom_clear_bam_transaction(nandc);
nandc->regs->cmd = q_op.cmd_reg;
nandc->regs->exec = 1;
- write_reg_dma(nandc, &nandc->regs->cmd, NAND_FLASH_CMD, instrs, NAND_BAM_NEXT_SGL);
+ qcom_write_reg_dma(nandc, &nandc->regs->cmd, NAND_FLASH_CMD, instrs, NAND_BAM_NEXT_SGL);
+
if (q_op.cmd_reg == OP_BLOCK_ERASE)
- write_reg_dma(nandc, &nandc->regs->cfg0, NAND_DEV0_CFG0, 2, NAND_BAM_NEXT_SGL);
+ qcom_write_reg_dma(nandc, &nandc->regs->cfg0, NAND_DEV0_CFG0, 2, NAND_BAM_NEXT_SGL);
- write_reg_dma(nandc, &nandc->regs->exec, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
- read_reg_dma(nandc, NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL);
+ qcom_write_reg_dma(nandc, &nandc->regs->exec, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
+ qcom_read_reg_dma(nandc, NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL);
- ret = submit_descs(nandc);
+ ret = qcom_submit_descs(nandc);
if (ret) {
dev_err(nandc->dev, "failure in submitting misc descriptor\n");
goto err_out;
@@ -2813,8 +2810,8 @@ static int qcom_param_page_type_exec(struct nand_chip *chip, const struct nand_
nandc->buf_count = 0;
nandc->buf_start = 0;
host->use_ecc = false;
- clear_read_regs(nandc);
- clear_bam_transaction(nandc);
+ qcom_clear_read_regs(nandc);
+ qcom_clear_bam_transaction(nandc);
nandc->regs->cmd = q_op.cmd_reg;
nandc->regs->addr0 = 0;
@@ -2857,8 +2854,8 @@ static int qcom_param_page_type_exec(struct nand_chip *chip, const struct nand_
nandc_set_read_loc(chip, 0, 0, 0, len, 1);
if (!nandc->props->qpic_version2) {
- write_reg_dma(nandc, &nandc->regs->vld, NAND_DEV_CMD_VLD, 1, 0);
- write_reg_dma(nandc, &nandc->regs->cmd1, NAND_DEV_CMD1, 1, NAND_BAM_NEXT_SGL);
+ qcom_write_reg_dma(nandc, &nandc->regs->vld, NAND_DEV_CMD_VLD, 1, 0);
+ qcom_write_reg_dma(nandc, &nandc->regs->cmd1, NAND_DEV_CMD1, 1, NAND_BAM_NEXT_SGL);
}
nandc->buf_count = len;
@@ -2866,17 +2863,16 @@ static int qcom_param_page_type_exec(struct nand_chip *chip, const struct nand_
config_nand_single_cw_page_read(chip, false, 0);
- read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer,
- nandc->buf_count, 0);
+ qcom_read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer, nandc->buf_count, 0);
/* restore CMD1 and VLD regs */
if (!nandc->props->qpic_version2) {
- write_reg_dma(nandc, &nandc->regs->orig_cmd1, NAND_DEV_CMD1_RESTORE, 1, 0);
- write_reg_dma(nandc, &nandc->regs->orig_vld, NAND_DEV_CMD_VLD_RESTORE, 1,
- NAND_BAM_NEXT_SGL);
+ qcom_write_reg_dma(nandc, &nandc->regs->orig_cmd1, NAND_DEV_CMD1_RESTORE, 1, 0);
+ qcom_write_reg_dma(nandc, &nandc->regs->orig_vld, NAND_DEV_CMD_VLD_RESTORE, 1,
+ NAND_BAM_NEXT_SGL);
}
- ret = submit_descs(nandc);
+ ret = qcom_submit_descs(nandc);
if (ret) {
dev_err(nandc->dev, "failure in submitting param page descriptor\n");
goto err_out;
@@ -3060,7 +3056,7 @@ static int qcom_nandc_alloc(struct qcom_nand_controller *nandc)
* maximum codeword size
*/
nandc->max_cwperpage = 1;
- nandc->bam_txn = alloc_bam_transaction(nandc);
+ nandc->bam_txn = qcom_alloc_bam_transaction(nandc);
if (!nandc->bam_txn) {
dev_err(nandc->dev,
"failed to allocate bam transaction\n");
--
2.34.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v5 4/7] drivers: mtd: nand: Add qpic_common API file
2024-05-08 8:36 [PATCH v5 0/7] Add QPIC SPI NAND driver Md Sadre Alam
` (2 preceding siblings ...)
2024-05-08 8:36 ` [PATCH v5 3/7] mtd: rawnand: qcom: Add qcom prefix to common api Md Sadre Alam
@ 2024-05-08 8:36 ` Md Sadre Alam
2024-05-16 12:37 ` Miquel Raynal
2024-05-08 8:36 ` [PATCH v5 5/7] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface Md Sadre Alam
` (2 subsequent siblings)
6 siblings, 1 reply; 16+ messages in thread
From: Md Sadre Alam @ 2024-05-08 8:36 UTC (permalink / raw)
To: broonie, robh, krzk+dt, conor+dt, andersson, konrad.dybcio,
miquel.raynal, richard, vigneshr, manivannan.sadhasivam,
linux-arm-msm, linux-spi, devicetree, linux-kernel, linux-mtd
Cc: quic_srichara, quic_varada, quic_mdalam, Alexandru Gagniuc
Add qpic_common.c file which hold all the common
qpic APIs which will be used by both qpic raw nand
driver and qpic spi nand driver.
Tested-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
---
Change in [v5]
* Remove multiple dma call back to avoid race condition
Change in [v4]
* Added kernel doc for all common api as per kernel doc
standard
* Added QPIC_COMMON config to build qpic_common.c
Change in [v3]
* Added original copy right
* Removed all EXPORT_SYMBOL()
* Made this common api file more generic
* Added qcom_ prefix to all api in this file
* Removed devm_kfree and added kfree
* Moved to_qcom_nand_controller() to raw nand driver
since it was only used by raw nand driver, so not needed
as common
* Added kernel doc for all api
* made reverse tree of variable declaration in
prep_adm_dma_desc() function
* Added if(!ret) condition in prep_adm_dma_desc()
function
* Initialized slave_conf as 0 while declaration
Change in [v2]
* Posted initial support for common api file
Change in [v1]
* Posted as RFC patch for design review
drivers/mtd/nand/Kconfig | 8 +
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/qpic_common.c | 741 ++++++++++++++++++
drivers/mtd/nand/raw/qcom_nandc.c | 1078 +-------------------------
include/linux/mtd/nand-qpic-common.h | 467 +++++++++++
5 files changed, 1221 insertions(+), 1074 deletions(-)
create mode 100644 drivers/mtd/nand/qpic_common.c
create mode 100644 include/linux/mtd/nand-qpic-common.h
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 5b0c2c95f10c..fc35f237d818 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -61,6 +61,14 @@ config MTD_NAND_ECC_MEDIATEK
help
This enables support for the hardware ECC engine from Mediatek.
+config QPIC_COMMON
+ tristate "QPIC common api file"
+ depends on ARCH_QCOM || COMPILE_TEST
+ help
+ This enables support for common api for qpic nand controller.
+ common apis will be used by both raw nand driver and serial nand
+ driver.
+
endmenu
endmenu
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 19e1291ac4d5..c0c1f8bd0220 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -3,6 +3,7 @@
nandcore-objs := core.o bbt.o
obj-$(CONFIG_MTD_NAND_CORE) += nandcore.o
obj-$(CONFIG_MTD_NAND_ECC_MEDIATEK) += ecc-mtk.o
+obj-$(CONFIG_QPIC_COMMON) += qpic_common.o
obj-y += onenand/
obj-y += raw/
diff --git a/drivers/mtd/nand/qpic_common.c b/drivers/mtd/nand/qpic_common.c
new file mode 100644
index 000000000000..d48892141365
--- /dev/null
+++ b/drivers/mtd/nand/qpic_common.c
@@ -0,0 +1,741 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ */
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/dma/qcom_adm.h>
+#include <linux/dma/qcom_bam_dma.h>
+#include <linux/module.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/mtd/nand-qpic-common.h>
+
+/**
+ * qcom_free_bam_transaction() - Frees the BAM transaction memory
+ * @nandc: qpic nand controller
+ *
+ * This function frees the bam transaction memory
+ */
+void qcom_free_bam_transaction(struct qcom_nand_controller *nandc)
+{
+ struct bam_transaction *bam_txn = nandc->bam_txn;
+
+ kfree(bam_txn);
+}
+
+/**
+ * qcom_alloc_bam_transaction() - allocate BAM transaction
+ * @nandc: qpic nand controller
+ *
+ * This function will allocate and initialize the BAM transaction structure
+ */
+struct bam_transaction *
+qcom_alloc_bam_transaction(struct qcom_nand_controller *nandc)
+{
+ struct bam_transaction *bam_txn;
+ size_t bam_txn_size;
+ unsigned int num_cw = nandc->max_cwperpage;
+ void *bam_txn_buf;
+
+ bam_txn_size =
+ sizeof(*bam_txn) + num_cw *
+ ((sizeof(*bam_txn->bam_ce) * QPIC_PER_CW_CMD_ELEMENTS) +
+ (sizeof(*bam_txn->cmd_sgl) * QPIC_PER_CW_CMD_SGL) +
+ (sizeof(*bam_txn->data_sgl) * QPIC_PER_CW_DATA_SGL));
+
+ bam_txn_buf = kzalloc(bam_txn_size, GFP_KERNEL);
+ if (!bam_txn_buf)
+ return NULL;
+
+ bam_txn = bam_txn_buf;
+ bam_txn_buf += sizeof(*bam_txn);
+
+ bam_txn->bam_ce = bam_txn_buf;
+ bam_txn_buf +=
+ sizeof(*bam_txn->bam_ce) * QPIC_PER_CW_CMD_ELEMENTS * num_cw;
+
+ bam_txn->cmd_sgl = bam_txn_buf;
+ bam_txn_buf +=
+ sizeof(*bam_txn->cmd_sgl) * QPIC_PER_CW_CMD_SGL * num_cw;
+
+ bam_txn->data_sgl = bam_txn_buf;
+
+ init_completion(&bam_txn->txn_done);
+
+ return bam_txn;
+}
+
+/**
+ * qcom_clear_bam_transaction() - Clears the BAM transaction
+ * @nandc: qpic nand controller
+ *
+ * This function will clear the BAM transaction indexes.
+ */
+void qcom_clear_bam_transaction(struct qcom_nand_controller *nandc)
+{
+ struct bam_transaction *bam_txn = nandc->bam_txn;
+
+ if (!nandc->props->supports_bam)
+ return;
+
+ memset(&bam_txn->bam_ce_pos, 0, sizeof(u32) * 8);
+ bam_txn->last_data_desc = NULL;
+
+ sg_init_table(bam_txn->cmd_sgl, nandc->max_cwperpage *
+ QPIC_PER_CW_CMD_SGL);
+ sg_init_table(bam_txn->data_sgl, nandc->max_cwperpage *
+ QPIC_PER_CW_DATA_SGL);
+
+ reinit_completion(&bam_txn->txn_done);
+}
+
+/**
+ * qcom_qpic_bam_dma_done() - Callback for DMA descriptor completion
+ * @data: data pointer
+ *
+ * This function is a callback for DMA descriptor completion
+ */
+void qcom_qpic_bam_dma_done(void *data)
+{
+ struct bam_transaction *bam_txn = data;
+
+ complete(&bam_txn->txn_done);
+}
+
+/**
+ * qcom_nandc_dev_to_mem() - Check for dma sync for cpu or device
+ * @nandc: qpic nand controller
+ * @is_cpu: cpu or Device
+ *
+ * This function will check for dma sync for cpu or device
+ */
+inline void qcom_nandc_dev_to_mem(struct qcom_nand_controller *nandc, bool is_cpu)
+{
+ if (!nandc->props->supports_bam)
+ return;
+
+ if (is_cpu)
+ dma_sync_single_for_cpu(nandc->dev, nandc->reg_read_dma,
+ MAX_REG_RD *
+ sizeof(*nandc->reg_read_buf),
+ DMA_FROM_DEVICE);
+ else
+ dma_sync_single_for_device(nandc->dev, nandc->reg_read_dma,
+ MAX_REG_RD *
+ sizeof(*nandc->reg_read_buf),
+ DMA_FROM_DEVICE);
+}
+
+/**
+ * qcom_prepare_bam_async_desc() - Prepare DMA descriptor
+ * @nandc: qpic nand controller
+ * @chan: dma channel
+ * @flags: flags to control DMA descriptor preparation
+ *
+ * This function maps the scatter gather list for DMA transfer and forms the
+ * DMA descriptor for BAM.This descriptor will be added in the NAND DMA
+ * descriptor queue which will be submitted to DMA engine.
+ */
+int qcom_prepare_bam_async_desc(struct qcom_nand_controller *nandc,
+ struct dma_chan *chan, unsigned long flags)
+{
+ struct desc_info *desc;
+ struct scatterlist *sgl;
+ unsigned int sgl_cnt;
+ int ret;
+ struct bam_transaction *bam_txn = nandc->bam_txn;
+ enum dma_transfer_direction dir_eng;
+ struct dma_async_tx_descriptor *dma_desc;
+
+ desc = kzalloc(sizeof(*desc), GFP_KERNEL);
+ if (!desc)
+ return -ENOMEM;
+
+ if (chan == nandc->cmd_chan) {
+ sgl = &bam_txn->cmd_sgl[bam_txn->cmd_sgl_start];
+ sgl_cnt = bam_txn->cmd_sgl_pos - bam_txn->cmd_sgl_start;
+ bam_txn->cmd_sgl_start = bam_txn->cmd_sgl_pos;
+ dir_eng = DMA_MEM_TO_DEV;
+ desc->dir = DMA_TO_DEVICE;
+ } else if (chan == nandc->tx_chan) {
+ sgl = &bam_txn->data_sgl[bam_txn->tx_sgl_start];
+ sgl_cnt = bam_txn->tx_sgl_pos - bam_txn->tx_sgl_start;
+ bam_txn->tx_sgl_start = bam_txn->tx_sgl_pos;
+ dir_eng = DMA_MEM_TO_DEV;
+ desc->dir = DMA_TO_DEVICE;
+ } else {
+ sgl = &bam_txn->data_sgl[bam_txn->rx_sgl_start];
+ sgl_cnt = bam_txn->rx_sgl_pos - bam_txn->rx_sgl_start;
+ bam_txn->rx_sgl_start = bam_txn->rx_sgl_pos;
+ dir_eng = DMA_DEV_TO_MEM;
+ desc->dir = DMA_FROM_DEVICE;
+ }
+
+ sg_mark_end(sgl + sgl_cnt - 1);
+ ret = dma_map_sg(nandc->dev, sgl, sgl_cnt, desc->dir);
+ if (ret == 0) {
+ dev_err(nandc->dev, "failure in mapping desc\n");
+ kfree(desc);
+ return -ENOMEM;
+ }
+
+ desc->sgl_cnt = sgl_cnt;
+ desc->bam_sgl = sgl;
+
+ dma_desc = dmaengine_prep_slave_sg(chan, sgl, sgl_cnt, dir_eng,
+ flags);
+
+ if (!dma_desc) {
+ dev_err(nandc->dev, "failure in prep desc\n");
+ dma_unmap_sg(nandc->dev, sgl, sgl_cnt, desc->dir);
+ kfree(desc);
+ return -EINVAL;
+ }
+
+ desc->dma_desc = dma_desc;
+
+ /* update last data/command descriptor */
+ if (chan == nandc->cmd_chan)
+ bam_txn->last_cmd_desc = dma_desc;
+ else
+ bam_txn->last_data_desc = dma_desc;
+
+ list_add_tail(&desc->node, &nandc->desc_list);
+
+ return 0;
+}
+
+/**
+ * qcom_prep_bam_dma_desc_cmd() - Prepares the command descriptor for BAM DMA
+ * @nandc: qpic nand controller
+ * @read: read or write type
+ * @reg_off: offset within the controller's data buffer
+ * @vaddr: virtual address of the buffer we want to write to
+ * @size: DMA transaction size in bytes
+ * @flags: flags to control DMA descriptor preparation
+ *
+ * This function will prepares the command descriptor for BAM DMA
+ * which will be used for NAND register reads and writes.
+ */
+int qcom_prep_bam_dma_desc_cmd(struct qcom_nand_controller *nandc, bool read,
+ int reg_off, const void *vaddr,
+ int size, unsigned int flags)
+{
+ int bam_ce_size;
+ int i, ret;
+ struct bam_cmd_element *bam_ce_buffer;
+ struct bam_transaction *bam_txn = nandc->bam_txn;
+
+ bam_ce_buffer = &bam_txn->bam_ce[bam_txn->bam_ce_pos];
+
+ /* fill the command desc */
+ for (i = 0; i < size; i++) {
+ if (read)
+ bam_prep_ce(&bam_ce_buffer[i],
+ nandc_reg_phys(nandc, reg_off + 4 * i),
+ BAM_READ_COMMAND,
+ reg_buf_dma_addr(nandc,
+ (__le32 *)vaddr + i));
+ else
+ bam_prep_ce_le32(&bam_ce_buffer[i],
+ nandc_reg_phys(nandc, reg_off + 4 * i),
+ BAM_WRITE_COMMAND,
+ *((__le32 *)vaddr + i));
+ }
+
+ bam_txn->bam_ce_pos += size;
+
+ /* use the separate sgl after this command */
+ if (flags & NAND_BAM_NEXT_SGL) {
+ bam_ce_buffer = &bam_txn->bam_ce[bam_txn->bam_ce_start];
+ bam_ce_size = (bam_txn->bam_ce_pos -
+ bam_txn->bam_ce_start) *
+ sizeof(struct bam_cmd_element);
+ sg_set_buf(&bam_txn->cmd_sgl[bam_txn->cmd_sgl_pos],
+ bam_ce_buffer, bam_ce_size);
+ bam_txn->cmd_sgl_pos++;
+ bam_txn->bam_ce_start = bam_txn->bam_ce_pos;
+
+ if (flags & NAND_BAM_NWD) {
+ ret = qcom_prepare_bam_async_desc(nandc, nandc->cmd_chan,
+ DMA_PREP_FENCE | DMA_PREP_CMD);
+ if (ret)
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * qcom_prep_bam_dma_desc_data() - Prepares the data descriptor for BAM DMA
+ * @nandc: qpic nand controller
+ * @read: read or write type
+ * @vaddr: virtual address of the buffer we want to write to
+ * @size: DMA transaction size in bytes
+ * @flags: flags to control DMA descriptor preparation
+ *
+ * This function will prepares the data descriptor for BAM DMA which
+ * will be used for NAND data reads and writes.
+ */
+int qcom_prep_bam_dma_desc_data(struct qcom_nand_controller *nandc, bool read,
+ const void *vaddr, int size, unsigned int flags)
+{
+ int ret;
+ struct bam_transaction *bam_txn = nandc->bam_txn;
+
+ if (read) {
+ sg_set_buf(&bam_txn->data_sgl[bam_txn->rx_sgl_pos],
+ vaddr, size);
+ bam_txn->rx_sgl_pos++;
+ } else {
+ sg_set_buf(&bam_txn->data_sgl[bam_txn->tx_sgl_pos],
+ vaddr, size);
+ bam_txn->tx_sgl_pos++;
+
+ /*
+ * BAM will only set EOT for DMA_PREP_INTERRUPT so if this flag
+ * is not set, form the DMA descriptor
+ */
+ if (!(flags & NAND_BAM_NO_EOT)) {
+ ret = qcom_prepare_bam_async_desc(nandc, nandc->tx_chan,
+ DMA_PREP_INTERRUPT);
+ if (ret)
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * qcom_prep_adm_dma_desc() - Prepare descriptor for adma
+ * @nandc: qpic nand controller
+ * @read: read or write type
+ * @reg_off: offset within the controller's data buffer
+ * @vaddr: virtual address of the buffer we want to write to
+ * @size: adm dma transaction size in bytes
+ * @flow_control: flow controller
+ *
+ * This function will prepare descriptor for adma
+ */
+int qcom_prep_adm_dma_desc(struct qcom_nand_controller *nandc, bool read,
+ int reg_off, const void *vaddr, int size,
+ bool flow_control)
+{
+ struct qcom_adm_peripheral_config periph_conf = {};
+ struct dma_async_tx_descriptor *dma_desc;
+ struct dma_slave_config slave_conf = {0};
+ enum dma_transfer_direction dir_eng;
+ struct desc_info *desc;
+ struct scatterlist *sgl;
+ int ret;
+
+ desc = kzalloc(sizeof(*desc), GFP_KERNEL);
+ if (!desc)
+ return -ENOMEM;
+
+ sgl = &desc->adm_sgl;
+
+ sg_init_one(sgl, vaddr, size);
+
+ if (read) {
+ dir_eng = DMA_DEV_TO_MEM;
+ desc->dir = DMA_FROM_DEVICE;
+ } else {
+ dir_eng = DMA_MEM_TO_DEV;
+ desc->dir = DMA_TO_DEVICE;
+ }
+
+ ret = dma_map_sg(nandc->dev, sgl, 1, desc->dir);
+ if (!ret) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ slave_conf.device_fc = flow_control;
+ if (read) {
+ slave_conf.src_maxburst = 16;
+ slave_conf.src_addr = nandc->base_dma + reg_off;
+ if (nandc->data_crci) {
+ periph_conf.crci = nandc->data_crci;
+ slave_conf.peripheral_config = &periph_conf;
+ slave_conf.peripheral_size = sizeof(periph_conf);
+ }
+ } else {
+ slave_conf.dst_maxburst = 16;
+ slave_conf.dst_addr = nandc->base_dma + reg_off;
+ if (nandc->cmd_crci) {
+ periph_conf.crci = nandc->cmd_crci;
+ slave_conf.peripheral_config = &periph_conf;
+ slave_conf.peripheral_size = sizeof(periph_conf);
+ }
+ }
+
+ ret = dmaengine_slave_config(nandc->chan, &slave_conf);
+ if (ret) {
+ dev_err(nandc->dev, "failed to configure dma channel\n");
+ goto err;
+ }
+
+ dma_desc = dmaengine_prep_slave_sg(nandc->chan, sgl, 1, dir_eng, 0);
+ if (!dma_desc) {
+ dev_err(nandc->dev, "failed to prepare desc\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ desc->dma_desc = dma_desc;
+
+ list_add_tail(&desc->node, &nandc->desc_list);
+
+ return 0;
+err:
+ kfree(desc);
+
+ return ret;
+}
+
+/**
+ * qcom_read_reg_dma() - read a given number of registers to the reg_read_buf pointer
+ * @nandc: qpic nand controller
+ * @first: offset of the first register in the contiguous block
+ * @num_regs: number of registers to read
+ * @flags: flags to control DMA descriptor preparation
+ *
+ * This function will prepares a descriptor to read a given number of
+ * contiguous registers to the reg_read_buf pointer.
+ */
+int qcom_read_reg_dma(struct qcom_nand_controller *nandc, int first,
+ int num_regs, unsigned int flags)
+{
+ bool flow_control = false;
+ void *vaddr;
+
+ vaddr = nandc->reg_read_buf + nandc->reg_read_pos;
+ nandc->reg_read_pos += num_regs;
+
+ if (first == NAND_DEV_CMD_VLD || first == NAND_DEV_CMD1)
+ first = dev_cmd_reg_addr(nandc, first);
+
+ if (nandc->props->supports_bam)
+ return qcom_prep_bam_dma_desc_cmd(nandc, true, first, vaddr,
+ num_regs, flags);
+
+ if (first == NAND_READ_ID || first == NAND_FLASH_STATUS)
+ flow_control = true;
+
+ return qcom_prep_adm_dma_desc(nandc, true, first, vaddr,
+ num_regs * sizeof(u32), flow_control);
+}
+
+/**
+ * qcom_write_reg_dma() - write a given number of registers
+ * @nandc: qpic nand controller
+ * @vaddr: contnigeous memory from where register value will
+ * be written
+ * @first: offset of the first register in the contiguous block
+ * @num_regs: number of registers to write
+ * @flags: flags to control DMA descriptor preparation
+ *
+ * This function will prepares a descriptor to write a given number of
+ * contiguous registers
+ */
+int qcom_write_reg_dma(struct qcom_nand_controller *nandc, __le32 *vaddr,
+ int first, int num_regs, unsigned int flags)
+{
+ bool flow_control = false;
+
+ if (first == NAND_EXEC_CMD)
+ flags |= NAND_BAM_NWD;
+
+ if (first == NAND_DEV_CMD1_RESTORE || first == NAND_DEV_CMD1)
+ first = dev_cmd_reg_addr(nandc, NAND_DEV_CMD1);
+
+ if (first == NAND_DEV_CMD_VLD_RESTORE || first == NAND_DEV_CMD_VLD)
+ first = dev_cmd_reg_addr(nandc, NAND_DEV_CMD_VLD);
+
+ if (nandc->props->supports_bam)
+ return qcom_prep_bam_dma_desc_cmd(nandc, false, first, vaddr,
+ num_regs, flags);
+
+ if (first == NAND_FLASH_CMD)
+ flow_control = true;
+
+ return qcom_prep_adm_dma_desc(nandc, false, first, vaddr,
+ num_regs * sizeof(u32), flow_control);
+}
+
+/**
+ * qcom_read_data_dma() - transfer data
+ * @nandc: qpic nand controller
+ * @reg_off: offset within the controller's data buffer
+ * @vaddr: virtual address of the buffer we want to write to
+ * @size: DMA transaction size in bytes
+ * @flags: flags to control DMA descriptor preparation
+ *
+ * This function will prepares a DMA descriptor to transfer data from the
+ * controller's internal buffer to the buffer 'vaddr'
+ */
+int qcom_read_data_dma(struct qcom_nand_controller *nandc, int reg_off,
+ const u8 *vaddr, int size, unsigned int flags)
+{
+ if (nandc->props->supports_bam)
+ return qcom_prep_bam_dma_desc_data(nandc, true, vaddr, size, flags);
+
+ return qcom_prep_adm_dma_desc(nandc, true, reg_off, vaddr, size, false);
+}
+
+/**
+ * qcom_write_data_dma() - transfer data
+ * @nandc: qpic nand controller
+ * @reg_off: offset within the controller's data buffer
+ * @vaddr: virtual address of the buffer we want to read from
+ * @size: DMA transaction size in bytes
+ * @flags: flags to control DMA descriptor preparation
+ *
+ * This function will prepares a DMA descriptor to transfer data from
+ * 'vaddr' to the controller's internal buffer
+ */
+int qcom_write_data_dma(struct qcom_nand_controller *nandc, int reg_off,
+ const u8 *vaddr, int size, unsigned int flags)
+{
+ if (nandc->props->supports_bam)
+ return qcom_prep_bam_dma_desc_data(nandc, false, vaddr, size, flags);
+
+ return qcom_prep_adm_dma_desc(nandc, false, reg_off, vaddr, size, false);
+}
+
+/**
+ * qcom_submit_descs() - submit dma descriptor
+ * @nandc: qpic nand controller
+ *
+ * This function will submit all the prepared dma descriptor
+ * cmd or data descriptor
+ */
+int qcom_submit_descs(struct qcom_nand_controller *nandc)
+{
+ struct desc_info *desc, *n;
+ dma_cookie_t cookie = 0;
+ struct bam_transaction *bam_txn = nandc->bam_txn;
+ int ret = 0;
+
+ if (nandc->props->supports_bam) {
+ if (bam_txn->rx_sgl_pos > bam_txn->rx_sgl_start) {
+ ret = qcom_prepare_bam_async_desc(nandc, nandc->rx_chan, 0);
+ if (ret)
+ goto err_unmap_free_desc;
+ }
+
+ if (bam_txn->tx_sgl_pos > bam_txn->tx_sgl_start) {
+ ret = qcom_prepare_bam_async_desc(nandc, nandc->tx_chan,
+ DMA_PREP_INTERRUPT);
+ if (ret)
+ goto err_unmap_free_desc;
+ }
+
+ if (bam_txn->cmd_sgl_pos > bam_txn->cmd_sgl_start) {
+ ret = qcom_prepare_bam_async_desc(nandc, nandc->cmd_chan,
+ DMA_PREP_CMD);
+ if (ret)
+ goto err_unmap_free_desc;
+ }
+ }
+
+ list_for_each_entry(desc, &nandc->desc_list, node)
+ cookie = dmaengine_submit(desc->dma_desc);
+
+ if (nandc->props->supports_bam) {
+ bam_txn->last_cmd_desc->callback = qcom_qpic_bam_dma_done;
+ bam_txn->last_cmd_desc->callback_param = bam_txn;
+
+ dma_async_issue_pending(nandc->tx_chan);
+ dma_async_issue_pending(nandc->rx_chan);
+ dma_async_issue_pending(nandc->cmd_chan);
+
+ if (!wait_for_completion_timeout(&bam_txn->txn_done,
+ QPIC_NAND_COMPLETION_TIMEOUT))
+ ret = -ETIMEDOUT;
+ } else {
+ if (dma_sync_wait(nandc->chan, cookie) != DMA_COMPLETE)
+ ret = -ETIMEDOUT;
+ }
+
+err_unmap_free_desc:
+ /*
+ * Unmap the dma sg_list and free the desc allocated by both
+ * qcom_prepare_bam_async_desc() and qcom_prep_adm_dma_desc() functions.
+ */
+ list_for_each_entry_safe(desc, n, &nandc->desc_list, node) {
+ list_del(&desc->node);
+
+ if (nandc->props->supports_bam)
+ dma_unmap_sg(nandc->dev, desc->bam_sgl,
+ desc->sgl_cnt, desc->dir);
+ else
+ dma_unmap_sg(nandc->dev, &desc->adm_sgl, 1,
+ desc->dir);
+
+ kfree(desc);
+ }
+
+ return ret;
+}
+
+/**
+ * qcom_clear_read_regs() - reset the read register buffer
+ * @nandc: qpic nand controller
+ *
+ * This function reset the register read buffer for next NAND operation
+ */
+void qcom_clear_read_regs(struct qcom_nand_controller *nandc)
+{
+ nandc->reg_read_pos = 0;
+ qcom_nandc_dev_to_mem(nandc, false);
+}
+
+/**
+ * qcom_nandc_unalloc() - unallocate qpic nand controller
+ * @nandc: qpic nand controller
+ *
+ * This function will unallocate memory alloacted for qpic nand controller
+ */
+void qcom_nandc_unalloc(struct qcom_nand_controller *nandc)
+{
+ if (nandc->props->supports_bam) {
+ if (!dma_mapping_error(nandc->dev, nandc->reg_read_dma))
+ dma_unmap_single(nandc->dev, nandc->reg_read_dma,
+ MAX_REG_RD *
+ sizeof(*nandc->reg_read_buf),
+ DMA_FROM_DEVICE);
+
+ if (nandc->tx_chan)
+ dma_release_channel(nandc->tx_chan);
+
+ if (nandc->rx_chan)
+ dma_release_channel(nandc->rx_chan);
+
+ if (nandc->cmd_chan)
+ dma_release_channel(nandc->cmd_chan);
+ } else {
+ if (nandc->chan)
+ dma_release_channel(nandc->chan);
+ }
+}
+
+/**
+ * qcom_nandc_alloc() - Allocate qpic nand controller
+ * @nandc: qpic nand controller
+ *
+ * This function will allocate memory for qpic nand controller
+ */
+int qcom_nandc_alloc(struct qcom_nand_controller *nandc)
+{
+ int ret;
+
+ ret = dma_set_coherent_mask(nandc->dev, DMA_BIT_MASK(32));
+ if (ret) {
+ dev_err(nandc->dev, "failed to set DMA mask\n");
+ return ret;
+ }
+
+ /*
+ * we use the internal buffer for reading ONFI params, reading small
+ * data like ID and status, and preforming read-copy-write operations
+ * when writing to a codeword partially. 532 is the maximum possible
+ * size of a codeword for our nand controller
+ */
+ nandc->buf_size = 532;
+
+ nandc->data_buffer = devm_kzalloc(nandc->dev, nandc->buf_size, GFP_KERNEL);
+ if (!nandc->data_buffer)
+ return -ENOMEM;
+
+ nandc->regs = devm_kzalloc(nandc->dev, sizeof(*nandc->regs), GFP_KERNEL);
+ if (!nandc->regs)
+ return -ENOMEM;
+
+ nandc->reg_read_buf = devm_kcalloc(nandc->dev, MAX_REG_RD,
+ sizeof(*nandc->reg_read_buf),
+ GFP_KERNEL);
+ if (!nandc->reg_read_buf)
+ return -ENOMEM;
+
+ if (nandc->props->supports_bam) {
+ nandc->reg_read_dma =
+ dma_map_single(nandc->dev, nandc->reg_read_buf,
+ MAX_REG_RD *
+ sizeof(*nandc->reg_read_buf),
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(nandc->dev, nandc->reg_read_dma)) {
+ dev_err(nandc->dev, "failed to DMA MAP reg buffer\n");
+ return -EIO;
+ }
+
+ nandc->tx_chan = dma_request_chan(nandc->dev, "tx");
+ if (IS_ERR(nandc->tx_chan)) {
+ ret = PTR_ERR(nandc->tx_chan);
+ nandc->tx_chan = NULL;
+ dev_err_probe(nandc->dev, ret,
+ "tx DMA channel request failed\n");
+ goto unalloc;
+ }
+
+ nandc->rx_chan = dma_request_chan(nandc->dev, "rx");
+ if (IS_ERR(nandc->rx_chan)) {
+ ret = PTR_ERR(nandc->rx_chan);
+ nandc->rx_chan = NULL;
+ dev_err_probe(nandc->dev, ret,
+ "rx DMA channel request failed\n");
+ goto unalloc;
+ }
+
+ nandc->cmd_chan = dma_request_chan(nandc->dev, "cmd");
+ if (IS_ERR(nandc->cmd_chan)) {
+ ret = PTR_ERR(nandc->cmd_chan);
+ nandc->cmd_chan = NULL;
+ dev_err_probe(nandc->dev, ret,
+ "cmd DMA channel request failed\n");
+ goto unalloc;
+ }
+
+ /*
+ * Initially allocate BAM transaction to read ONFI param page.
+ * After detecting all the devices, this BAM transaction will
+ * be freed and the next BAM transaction will be allocated with
+ * maximum codeword size
+ */
+ nandc->max_cwperpage = 1;
+ nandc->bam_txn = qcom_alloc_bam_transaction(nandc);
+ if (!nandc->bam_txn) {
+ dev_err(nandc->dev,
+ "failed to allocate bam transaction\n");
+ ret = -ENOMEM;
+ goto unalloc;
+ }
+ } else {
+ nandc->chan = dma_request_chan(nandc->dev, "rxtx");
+ if (IS_ERR(nandc->chan)) {
+ ret = PTR_ERR(nandc->chan);
+ nandc->chan = NULL;
+ dev_err_probe(nandc->dev, ret,
+ "rxtx DMA channel request failed\n");
+ return ret;
+ }
+ }
+
+ INIT_LIST_HEAD(&nandc->desc_list);
+ INIT_LIST_HEAD(&nandc->host_list);
+
+ return 0;
+unalloc:
+ qcom_nandc_unalloc(nandc);
+ return ret;
+}
diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index d958b8fb5b68..3282825fb254 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -15,417 +15,7 @@
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
-
-/* NANDc reg offsets */
-#define NAND_FLASH_CMD 0x00
-#define NAND_ADDR0 0x04
-#define NAND_ADDR1 0x08
-#define NAND_FLASH_CHIP_SELECT 0x0c
-#define NAND_EXEC_CMD 0x10
-#define NAND_FLASH_STATUS 0x14
-#define NAND_BUFFER_STATUS 0x18
-#define NAND_DEV0_CFG0 0x20
-#define NAND_DEV0_CFG1 0x24
-#define NAND_DEV0_ECC_CFG 0x28
-#define NAND_AUTO_STATUS_EN 0x2c
-#define NAND_DEV1_CFG0 0x30
-#define NAND_DEV1_CFG1 0x34
-#define NAND_READ_ID 0x40
-#define NAND_READ_STATUS 0x44
-#define NAND_DEV_CMD0 0xa0
-#define NAND_DEV_CMD1 0xa4
-#define NAND_DEV_CMD2 0xa8
-#define NAND_DEV_CMD_VLD 0xac
-#define SFLASHC_BURST_CFG 0xe0
-#define NAND_ERASED_CW_DETECT_CFG 0xe8
-#define NAND_ERASED_CW_DETECT_STATUS 0xec
-#define NAND_EBI2_ECC_BUF_CFG 0xf0
-#define FLASH_BUF_ACC 0x100
-
-#define NAND_CTRL 0xf00
-#define NAND_VERSION 0xf08
-#define NAND_READ_LOCATION_0 0xf20
-#define NAND_READ_LOCATION_1 0xf24
-#define NAND_READ_LOCATION_2 0xf28
-#define NAND_READ_LOCATION_3 0xf2c
-#define NAND_READ_LOCATION_LAST_CW_0 0xf40
-#define NAND_READ_LOCATION_LAST_CW_1 0xf44
-#define NAND_READ_LOCATION_LAST_CW_2 0xf48
-#define NAND_READ_LOCATION_LAST_CW_3 0xf4c
-
-/* dummy register offsets, used by qcom_write_reg_dma */
-#define NAND_DEV_CMD1_RESTORE 0xdead
-#define NAND_DEV_CMD_VLD_RESTORE 0xbeef
-
-/* NAND_FLASH_CMD bits */
-#define PAGE_ACC BIT(4)
-#define LAST_PAGE BIT(5)
-
-/* NAND_FLASH_CHIP_SELECT bits */
-#define NAND_DEV_SEL 0
-#define DM_EN BIT(2)
-
-/* NAND_FLASH_STATUS bits */
-#define FS_OP_ERR BIT(4)
-#define FS_READY_BSY_N BIT(5)
-#define FS_MPU_ERR BIT(8)
-#define FS_DEVICE_STS_ERR BIT(16)
-#define FS_DEVICE_WP BIT(23)
-
-/* NAND_BUFFER_STATUS bits */
-#define BS_UNCORRECTABLE_BIT BIT(8)
-#define BS_CORRECTABLE_ERR_MSK 0x1f
-
-/* NAND_DEVn_CFG0 bits */
-#define DISABLE_STATUS_AFTER_WRITE 4
-#define CW_PER_PAGE 6
-#define UD_SIZE_BYTES 9
-#define UD_SIZE_BYTES_MASK GENMASK(18, 9)
-#define ECC_PARITY_SIZE_BYTES_RS 19
-#define SPARE_SIZE_BYTES 23
-#define SPARE_SIZE_BYTES_MASK GENMASK(26, 23)
-#define NUM_ADDR_CYCLES 27
-#define STATUS_BFR_READ 30
-#define SET_RD_MODE_AFTER_STATUS 31
-
-/* NAND_DEVn_CFG0 bits */
-#define DEV0_CFG1_ECC_DISABLE 0
-#define WIDE_FLASH 1
-#define NAND_RECOVERY_CYCLES 2
-#define CS_ACTIVE_BSY 5
-#define BAD_BLOCK_BYTE_NUM 6
-#define BAD_BLOCK_IN_SPARE_AREA 16
-#define WR_RD_BSY_GAP 17
-#define ENABLE_BCH_ECC 27
-
-/* NAND_DEV0_ECC_CFG bits */
-#define ECC_CFG_ECC_DISABLE 0
-#define ECC_SW_RESET 1
-#define ECC_MODE 4
-#define ECC_PARITY_SIZE_BYTES_BCH 8
-#define ECC_NUM_DATA_BYTES 16
-#define ECC_NUM_DATA_BYTES_MASK GENMASK(25, 16)
-#define ECC_FORCE_CLK_OPEN 30
-
-/* NAND_DEV_CMD1 bits */
-#define READ_ADDR 0
-
-/* NAND_DEV_CMD_VLD bits */
-#define READ_START_VLD BIT(0)
-#define READ_STOP_VLD BIT(1)
-#define WRITE_START_VLD BIT(2)
-#define ERASE_START_VLD BIT(3)
-#define SEQ_READ_START_VLD BIT(4)
-
-/* NAND_EBI2_ECC_BUF_CFG bits */
-#define NUM_STEPS 0
-
-/* NAND_ERASED_CW_DETECT_CFG bits */
-#define ERASED_CW_ECC_MASK 1
-#define AUTO_DETECT_RES 0
-#define MASK_ECC BIT(ERASED_CW_ECC_MASK)
-#define RESET_ERASED_DET BIT(AUTO_DETECT_RES)
-#define ACTIVE_ERASED_DET (0 << AUTO_DETECT_RES)
-#define CLR_ERASED_PAGE_DET (RESET_ERASED_DET | MASK_ECC)
-#define SET_ERASED_PAGE_DET (ACTIVE_ERASED_DET | MASK_ECC)
-
-/* NAND_ERASED_CW_DETECT_STATUS bits */
-#define PAGE_ALL_ERASED BIT(7)
-#define CODEWORD_ALL_ERASED BIT(6)
-#define PAGE_ERASED BIT(5)
-#define CODEWORD_ERASED BIT(4)
-#define ERASED_PAGE (PAGE_ALL_ERASED | PAGE_ERASED)
-#define ERASED_CW (CODEWORD_ALL_ERASED | CODEWORD_ERASED)
-
-/* NAND_READ_LOCATION_n bits */
-#define READ_LOCATION_OFFSET 0
-#define READ_LOCATION_SIZE 16
-#define READ_LOCATION_LAST 31
-
-/* Version Mask */
-#define NAND_VERSION_MAJOR_MASK 0xf0000000
-#define NAND_VERSION_MAJOR_SHIFT 28
-#define NAND_VERSION_MINOR_MASK 0x0fff0000
-#define NAND_VERSION_MINOR_SHIFT 16
-
-/* NAND OP_CMDs */
-#define OP_PAGE_READ 0x2
-#define OP_PAGE_READ_WITH_ECC 0x3
-#define OP_PAGE_READ_WITH_ECC_SPARE 0x4
-#define OP_PAGE_READ_ONFI_READ 0x5
-#define OP_PROGRAM_PAGE 0x6
-#define OP_PAGE_PROGRAM_WITH_ECC 0x7
-#define OP_PROGRAM_PAGE_SPARE 0x9
-#define OP_BLOCK_ERASE 0xa
-#define OP_CHECK_STATUS 0xc
-#define OP_FETCH_ID 0xb
-#define OP_RESET_DEVICE 0xd
-
-/* Default Value for NAND_DEV_CMD_VLD */
-#define NAND_DEV_CMD_VLD_VAL (READ_START_VLD | WRITE_START_VLD | \
- ERASE_START_VLD | SEQ_READ_START_VLD)
-
-/* NAND_CTRL bits */
-#define BAM_MODE_EN BIT(0)
-
-/*
- * the NAND controller performs reads/writes with ECC in 516 byte chunks.
- * the driver calls the chunks 'step' or 'codeword' interchangeably
- */
-#define NANDC_STEP_SIZE 512
-
-/*
- * the largest page size we support is 8K, this will have 16 steps/codewords
- * of 512 bytes each
- */
-#define MAX_NUM_STEPS (SZ_8K / NANDC_STEP_SIZE)
-
-/* we read at most 3 registers per codeword scan */
-#define MAX_REG_RD (3 * MAX_NUM_STEPS)
-
-/* ECC modes supported by the controller */
-#define ECC_NONE BIT(0)
-#define ECC_RS_4BIT BIT(1)
-#define ECC_BCH_4BIT BIT(2)
-#define ECC_BCH_8BIT BIT(3)
-
-/*
- * Returns the actual register address for all NAND_DEV_ registers
- * (i.e. NAND_DEV_CMD0, NAND_DEV_CMD1, NAND_DEV_CMD2 and NAND_DEV_CMD_VLD)
- */
-#define dev_cmd_reg_addr(nandc, reg) ((nandc)->props->dev_cmd_reg_start + (reg))
-
-/* Returns the NAND register physical address */
-#define nandc_reg_phys(chip, offset) ((chip)->base_phys + (offset))
-
-/* Returns the dma address for reg read buffer */
-#define reg_buf_dma_addr(chip, vaddr) \
- ((chip)->reg_read_dma + \
- ((u8 *)(vaddr) - (u8 *)(chip)->reg_read_buf))
-
-#define QPIC_PER_CW_CMD_ELEMENTS 32
-#define QPIC_PER_CW_CMD_SGL 32
-#define QPIC_PER_CW_DATA_SGL 8
-
-#define QPIC_NAND_COMPLETION_TIMEOUT msecs_to_jiffies(2000)
-
-/*
- * Flags used in DMA descriptor preparation helper functions
- * (i.e. qcom_read_reg_dma/qcom_write_reg_dma/qcom_read_data_dma/qcom_write_data_dma)
- */
-/* Don't set the EOT in current tx BAM sgl */
-#define NAND_BAM_NO_EOT BIT(0)
-/* Set the NWD flag in current BAM sgl */
-#define NAND_BAM_NWD BIT(1)
-/* Finish writing in the current BAM sgl and start writing in another BAM sgl */
-#define NAND_BAM_NEXT_SGL BIT(2)
-/*
- * Erased codeword status is being used two times in single transfer so this
- * flag will determine the current value of erased codeword status register
- */
-#define NAND_ERASED_CW_SET BIT(4)
-
-#define MAX_ADDRESS_CYCLE 5
-
-/*
- * This data type corresponds to the BAM transaction which will be used for all
- * NAND transfers.
- * @bam_ce - the array of BAM command elements
- * @cmd_sgl - sgl for NAND BAM command pipe
- * @data_sgl - sgl for NAND BAM consumer/producer pipe
- * @last_data_desc - last DMA desc in data channel (tx/rx).
- * @last_cmd_desc - last DMA desc in command channel.
- * @txn_done - completion for NAND transfer.
- * @bam_ce_pos - the index in bam_ce which is available for next sgl
- * @bam_ce_start - the index in bam_ce which marks the start position ce
- * for current sgl. It will be used for size calculation
- * for current sgl
- * @cmd_sgl_pos - current index in command sgl.
- * @cmd_sgl_start - start index in command sgl.
- * @tx_sgl_pos - current index in data sgl for tx.
- * @tx_sgl_start - start index in data sgl for tx.
- * @rx_sgl_pos - current index in data sgl for rx.
- * @rx_sgl_start - start index in data sgl for rx.
- */
-struct bam_transaction {
- struct bam_cmd_element *bam_ce;
- struct scatterlist *cmd_sgl;
- struct scatterlist *data_sgl;
- struct dma_async_tx_descriptor *last_data_desc;
- struct dma_async_tx_descriptor *last_cmd_desc;
- struct completion txn_done;
- u32 bam_ce_pos;
- u32 bam_ce_start;
- u32 cmd_sgl_pos;
- u32 cmd_sgl_start;
- u32 tx_sgl_pos;
- u32 tx_sgl_start;
- u32 rx_sgl_pos;
- u32 rx_sgl_start;
-};
-
-/*
- * This data type corresponds to the nand dma descriptor
- * @dma_desc - low level DMA engine descriptor
- * @list - list for desc_info
- *
- * @adm_sgl - sgl which will be used for single sgl dma descriptor. Only used by
- * ADM
- * @bam_sgl - sgl which will be used for dma descriptor. Only used by BAM
- * @sgl_cnt - number of SGL in bam_sgl. Only used by BAM
- * @dir - DMA transfer direction
- */
-struct desc_info {
- struct dma_async_tx_descriptor *dma_desc;
- struct list_head node;
-
- union {
- struct scatterlist adm_sgl;
- struct {
- struct scatterlist *bam_sgl;
- int sgl_cnt;
- };
- };
- enum dma_data_direction dir;
-};
-
-/*
- * holds the current register values that we want to write. acts as a contiguous
- * chunk of memory which we use to write the controller registers through DMA.
- */
-struct nandc_regs {
- __le32 cmd;
- __le32 addr0;
- __le32 addr1;
- __le32 chip_sel;
- __le32 exec;
-
- __le32 cfg0;
- __le32 cfg1;
- __le32 ecc_bch_cfg;
-
- __le32 clrflashstatus;
- __le32 clrreadstatus;
-
- __le32 cmd1;
- __le32 vld;
-
- __le32 orig_cmd1;
- __le32 orig_vld;
-
- __le32 ecc_buf_cfg;
- __le32 read_location0;
- __le32 read_location1;
- __le32 read_location2;
- __le32 read_location3;
- __le32 read_location_last0;
- __le32 read_location_last1;
- __le32 read_location_last2;
- __le32 read_location_last3;
-
- __le32 erased_cw_detect_cfg_clr;
- __le32 erased_cw_detect_cfg_set;
-};
-
-/*
- * NAND controller data struct
- *
- * @dev: parent device
- *
- * @base: MMIO base
- *
- * @core_clk: controller clock
- * @aon_clk: another controller clock
- *
- * @regs: a contiguous chunk of memory for DMA register
- * writes. contains the register values to be
- * written to controller
- *
- * @props: properties of current NAND controller,
- * initialized via DT match data
- *
- * @controller: base controller structure
- * @host_list: list containing all the chips attached to the
- * controller
- *
- * @chan: dma channel
- * @cmd_crci: ADM DMA CRCI for command flow control
- * @data_crci: ADM DMA CRCI for data flow control
- *
- * @desc_list: DMA descriptor list (list of desc_infos)
- *
- * @data_buffer: our local DMA buffer for page read/writes,
- * used when we can't use the buffer provided
- * by upper layers directly
- * @reg_read_buf: local buffer for reading back registers via DMA
- *
- * @base_phys: physical base address of controller registers
- * @base_dma: dma base address of controller registers
- * @reg_read_dma: contains dma address for register read buffer
- *
- * @buf_size/count/start: markers for chip->legacy.read_buf/write_buf
- * functions
- * @max_cwperpage: maximum QPIC codewords required. calculated
- * from all connected NAND devices pagesize
- *
- * @reg_read_pos: marker for data read in reg_read_buf
- *
- * @cmd1/vld: some fixed controller register values
- *
- * @exec_opwrite: flag to select correct number of code word
- * while reading status
- */
-struct qcom_nand_controller {
- struct device *dev;
-
- void __iomem *base;
-
- struct clk *core_clk;
- struct clk *aon_clk;
-
- struct nandc_regs *regs;
- struct bam_transaction *bam_txn;
-
- const struct qcom_nandc_props *props;
-
- struct nand_controller controller;
- struct list_head host_list;
-
- union {
- /* will be used only by QPIC for BAM DMA */
- struct {
- struct dma_chan *tx_chan;
- struct dma_chan *rx_chan;
- struct dma_chan *cmd_chan;
- };
-
- /* will be used only by EBI2 for ADM DMA */
- struct {
- struct dma_chan *chan;
- unsigned int cmd_crci;
- unsigned int data_crci;
- };
- };
-
- struct list_head desc_list;
-
- u8 *data_buffer;
- __le32 *reg_read_buf;
-
- phys_addr_t base_phys;
- dma_addr_t base_dma;
- dma_addr_t reg_read_dma;
-
- int buf_size;
- int buf_count;
- int buf_start;
- unsigned int max_cwperpage;
-
- int reg_read_pos;
-
- u32 cmd1, vld;
- bool exec_opwrite;
-};
+#include <linux/mtd/nand-qpic-common.h>
/*
* NAND special boot partitions
@@ -530,97 +120,6 @@ struct qcom_nand_host {
bool bch_enabled;
};
-/*
- * This data type corresponds to the NAND controller properties which varies
- * among different NAND controllers.
- * @ecc_modes - ecc mode for NAND
- * @dev_cmd_reg_start - NAND_DEV_CMD_* registers starting offset
- * @supports_bam - whether NAND controller is using BAM
- * @nandc_part_of_qpic - whether NAND controller is part of qpic IP
- * @qpic_version2 - flag to indicate QPIC IP version 2
- * @use_codeword_fixup - whether NAND has different layout for boot partitions
- */
-struct qcom_nandc_props {
- u32 ecc_modes;
- u32 dev_cmd_reg_start;
- bool supports_bam;
- bool nandc_part_of_qpic;
- bool qpic_version2;
- bool use_codeword_fixup;
-};
-
-/* Frees the BAM transaction memory */
-static void qcom_free_bam_transaction(struct qcom_nand_controller *nandc)
-{
- struct bam_transaction *bam_txn = nandc->bam_txn;
-
- devm_kfree(nandc->dev, bam_txn);
-}
-
-/* Allocates and Initializes the BAM transaction */
-static struct bam_transaction *
-qcom_alloc_bam_transaction(struct qcom_nand_controller *nandc)
-{
- struct bam_transaction *bam_txn;
- size_t bam_txn_size;
- unsigned int num_cw = nandc->max_cwperpage;
- void *bam_txn_buf;
-
- bam_txn_size =
- sizeof(*bam_txn) + num_cw *
- ((sizeof(*bam_txn->bam_ce) * QPIC_PER_CW_CMD_ELEMENTS) +
- (sizeof(*bam_txn->cmd_sgl) * QPIC_PER_CW_CMD_SGL) +
- (sizeof(*bam_txn->data_sgl) * QPIC_PER_CW_DATA_SGL));
-
- bam_txn_buf = devm_kzalloc(nandc->dev, bam_txn_size, GFP_KERNEL);
- if (!bam_txn_buf)
- return NULL;
-
- bam_txn = bam_txn_buf;
- bam_txn_buf += sizeof(*bam_txn);
-
- bam_txn->bam_ce = bam_txn_buf;
- bam_txn_buf +=
- sizeof(*bam_txn->bam_ce) * QPIC_PER_CW_CMD_ELEMENTS * num_cw;
-
- bam_txn->cmd_sgl = bam_txn_buf;
- bam_txn_buf +=
- sizeof(*bam_txn->cmd_sgl) * QPIC_PER_CW_CMD_SGL * num_cw;
-
- bam_txn->data_sgl = bam_txn_buf;
-
- init_completion(&bam_txn->txn_done);
-
- return bam_txn;
-}
-
-/* Clears the BAM transaction indexes */
-static void qcom_clear_bam_transaction(struct qcom_nand_controller *nandc)
-{
- struct bam_transaction *bam_txn = nandc->bam_txn;
-
- if (!nandc->props->supports_bam)
- return;
-
- memset(&bam_txn->bam_ce_pos, 0, sizeof(u32) * 8);
- bam_txn->last_data_desc = NULL;
-
- sg_init_table(bam_txn->cmd_sgl, nandc->max_cwperpage *
- QPIC_PER_CW_CMD_SGL);
- sg_init_table(bam_txn->data_sgl, nandc->max_cwperpage *
- QPIC_PER_CW_DATA_SGL);
-
- reinit_completion(&bam_txn->txn_done);
-}
-
-/* Callback for DMA descriptor completion */
-static void qcom_qpic_bam_dma_done(void *data)
-{
- struct bam_transaction *bam_txn = data;
-
- complete(&bam_txn->txn_done);
-}
-
static inline struct qcom_nand_host *to_qcom_nand_host(struct nand_chip *chip)
{
return container_of(chip, struct qcom_nand_host, chip);
@@ -644,23 +143,6 @@ static inline void nandc_write(struct qcom_nand_controller *nandc, int offset,
iowrite32(val, nandc->base + offset);
}
-static inline void qcom_nandc_dev_to_mem(struct qcom_nand_controller *nandc, bool is_cpu)
-{
- if (!nandc->props->supports_bam)
- return;
-
- if (is_cpu)
- dma_sync_single_for_cpu(nandc->dev, nandc->reg_read_dma,
- MAX_REG_RD *
- sizeof(*nandc->reg_read_buf),
- DMA_FROM_DEVICE);
- else
- dma_sync_single_for_device(nandc->dev, nandc->reg_read_dma,
- MAX_REG_RD *
- sizeof(*nandc->reg_read_buf),
- DMA_FROM_DEVICE);
-}
-
/* Helper to check the code word, whether it is last cw or not */
static bool qcom_nandc_is_last_cw(struct nand_ecc_ctrl *ecc, int cw)
{
@@ -812,354 +294,6 @@ static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read, i
host->cw_data : host->cw_size, 1);
}
-/*
- * Maps the scatter gather list for DMA transfer and forms the DMA descriptor
- * for BAM. This descriptor will be added in the NAND DMA descriptor queue
- * which will be submitted to DMA engine.
- */
-static int qcom_prepare_bam_async_desc(struct qcom_nand_controller *nandc,
- struct dma_chan *chan, unsigned long flags)
-{
- struct desc_info *desc;
- struct scatterlist *sgl;
- unsigned int sgl_cnt;
- int ret;
- struct bam_transaction *bam_txn = nandc->bam_txn;
- enum dma_transfer_direction dir_eng;
- struct dma_async_tx_descriptor *dma_desc;
-
- desc = kzalloc(sizeof(*desc), GFP_KERNEL);
- if (!desc)
- return -ENOMEM;
-
- if (chan == nandc->cmd_chan) {
- sgl = &bam_txn->cmd_sgl[bam_txn->cmd_sgl_start];
- sgl_cnt = bam_txn->cmd_sgl_pos - bam_txn->cmd_sgl_start;
- bam_txn->cmd_sgl_start = bam_txn->cmd_sgl_pos;
- dir_eng = DMA_MEM_TO_DEV;
- desc->dir = DMA_TO_DEVICE;
- } else if (chan == nandc->tx_chan) {
- sgl = &bam_txn->data_sgl[bam_txn->tx_sgl_start];
- sgl_cnt = bam_txn->tx_sgl_pos - bam_txn->tx_sgl_start;
- bam_txn->tx_sgl_start = bam_txn->tx_sgl_pos;
- dir_eng = DMA_MEM_TO_DEV;
- desc->dir = DMA_TO_DEVICE;
- } else {
- sgl = &bam_txn->data_sgl[bam_txn->rx_sgl_start];
- sgl_cnt = bam_txn->rx_sgl_pos - bam_txn->rx_sgl_start;
- bam_txn->rx_sgl_start = bam_txn->rx_sgl_pos;
- dir_eng = DMA_DEV_TO_MEM;
- desc->dir = DMA_FROM_DEVICE;
- }
-
- sg_mark_end(sgl + sgl_cnt - 1);
- ret = dma_map_sg(nandc->dev, sgl, sgl_cnt, desc->dir);
- if (ret == 0) {
- dev_err(nandc->dev, "failure in mapping desc\n");
- kfree(desc);
- return -ENOMEM;
- }
-
- desc->sgl_cnt = sgl_cnt;
- desc->bam_sgl = sgl;
-
- dma_desc = dmaengine_prep_slave_sg(chan, sgl, sgl_cnt, dir_eng,
- flags);
-
- if (!dma_desc) {
- dev_err(nandc->dev, "failure in prep desc\n");
- dma_unmap_sg(nandc->dev, sgl, sgl_cnt, desc->dir);
- kfree(desc);
- return -EINVAL;
- }
-
- desc->dma_desc = dma_desc;
-
- /* update last data/command descriptor */
- if (chan == nandc->cmd_chan)
- bam_txn->last_cmd_desc = dma_desc;
- else
- bam_txn->last_data_desc = dma_desc;
-
- list_add_tail(&desc->node, &nandc->desc_list);
-
- return 0;
-}
-
-/*
- * Prepares the command descriptor for BAM DMA which will be used for NAND
- * register reads and writes. The command descriptor requires the command
- * to be formed in command element type so this function uses the command
- * element from bam transaction ce array and fills the same with required
- * data. A single SGL can contain multiple command elements so
- * NAND_BAM_NEXT_SGL will be used for starting the separate SGL
- * after the current command element.
- */
-static int qcom_prep_bam_dma_desc_cmd(struct qcom_nand_controller *nandc, bool read,
- int reg_off, const void *vaddr,
- int size, unsigned int flags)
-{
- int bam_ce_size;
- int i, ret;
- struct bam_cmd_element *bam_ce_buffer;
- struct bam_transaction *bam_txn = nandc->bam_txn;
-
- bam_ce_buffer = &bam_txn->bam_ce[bam_txn->bam_ce_pos];
-
- /* fill the command desc */
- for (i = 0; i < size; i++) {
- if (read)
- bam_prep_ce(&bam_ce_buffer[i],
- nandc_reg_phys(nandc, reg_off + 4 * i),
- BAM_READ_COMMAND,
- reg_buf_dma_addr(nandc,
- (__le32 *)vaddr + i));
- else
- bam_prep_ce_le32(&bam_ce_buffer[i],
- nandc_reg_phys(nandc, reg_off + 4 * i),
- BAM_WRITE_COMMAND,
- *((__le32 *)vaddr + i));
- }
-
- bam_txn->bam_ce_pos += size;
-
- /* use the separate sgl after this command */
- if (flags & NAND_BAM_NEXT_SGL) {
- bam_ce_buffer = &bam_txn->bam_ce[bam_txn->bam_ce_start];
- bam_ce_size = (bam_txn->bam_ce_pos -
- bam_txn->bam_ce_start) *
- sizeof(struct bam_cmd_element);
- sg_set_buf(&bam_txn->cmd_sgl[bam_txn->cmd_sgl_pos],
- bam_ce_buffer, bam_ce_size);
- bam_txn->cmd_sgl_pos++;
- bam_txn->bam_ce_start = bam_txn->bam_ce_pos;
-
- if (flags & NAND_BAM_NWD) {
- ret = qcom_prepare_bam_async_desc(nandc, nandc->cmd_chan,
- DMA_PREP_FENCE | DMA_PREP_CMD);
- if (ret)
- return ret;
- }
- }
-
- return 0;
-}
-
-/*
- * Prepares the data descriptor for BAM DMA which will be used for NAND
- * data reads and writes.
- */
-static int qcom_prep_bam_dma_desc_data(struct qcom_nand_controller *nandc, bool read,
- const void *vaddr, int size, unsigned int flags)
-{
- int ret;
- struct bam_transaction *bam_txn = nandc->bam_txn;
-
- if (read) {
- sg_set_buf(&bam_txn->data_sgl[bam_txn->rx_sgl_pos],
- vaddr, size);
- bam_txn->rx_sgl_pos++;
- } else {
- sg_set_buf(&bam_txn->data_sgl[bam_txn->tx_sgl_pos],
- vaddr, size);
- bam_txn->tx_sgl_pos++;
-
- /*
- * BAM will only set EOT for DMA_PREP_INTERRUPT so if this flag
- * is not set, form the DMA descriptor
- */
- if (!(flags & NAND_BAM_NO_EOT)) {
- ret = qcom_prepare_bam_async_desc(nandc, nandc->tx_chan,
- DMA_PREP_INTERRUPT);
- if (ret)
- return ret;
- }
- }
-
- return 0;
-}
-
-static int qcom_prep_adm_dma_desc(struct qcom_nand_controller *nandc, bool read,
- int reg_off, const void *vaddr, int size,
- bool flow_control)
-{
- struct desc_info *desc;
- struct dma_async_tx_descriptor *dma_desc;
- struct scatterlist *sgl;
- struct dma_slave_config slave_conf;
- struct qcom_adm_peripheral_config periph_conf = {};
- enum dma_transfer_direction dir_eng;
- int ret;
-
- desc = kzalloc(sizeof(*desc), GFP_KERNEL);
- if (!desc)
- return -ENOMEM;
-
- sgl = &desc->adm_sgl;
-
- sg_init_one(sgl, vaddr, size);
-
- if (read) {
- dir_eng = DMA_DEV_TO_MEM;
- desc->dir = DMA_FROM_DEVICE;
- } else {
- dir_eng = DMA_MEM_TO_DEV;
- desc->dir = DMA_TO_DEVICE;
- }
-
- ret = dma_map_sg(nandc->dev, sgl, 1, desc->dir);
- if (ret == 0) {
- ret = -ENOMEM;
- goto err;
- }
-
- memset(&slave_conf, 0x00, sizeof(slave_conf));
-
- slave_conf.device_fc = flow_control;
- if (read) {
- slave_conf.src_maxburst = 16;
- slave_conf.src_addr = nandc->base_dma + reg_off;
- if (nandc->data_crci) {
- periph_conf.crci = nandc->data_crci;
- slave_conf.peripheral_config = &periph_conf;
- slave_conf.peripheral_size = sizeof(periph_conf);
- }
- } else {
- slave_conf.dst_maxburst = 16;
- slave_conf.dst_addr = nandc->base_dma + reg_off;
- if (nandc->cmd_crci) {
- periph_conf.crci = nandc->cmd_crci;
- slave_conf.peripheral_config = &periph_conf;
- slave_conf.peripheral_size = sizeof(periph_conf);
- }
- }
-
- ret = dmaengine_slave_config(nandc->chan, &slave_conf);
- if (ret) {
- dev_err(nandc->dev, "failed to configure dma channel\n");
- goto err;
- }
-
- dma_desc = dmaengine_prep_slave_sg(nandc->chan, sgl, 1, dir_eng, 0);
- if (!dma_desc) {
- dev_err(nandc->dev, "failed to prepare desc\n");
- ret = -EINVAL;
- goto err;
- }
-
- desc->dma_desc = dma_desc;
-
- list_add_tail(&desc->node, &nandc->desc_list);
-
- return 0;
-err:
- kfree(desc);
-
- return ret;
-}
-
-/*
- * qcom_read_reg_dma: prepares a descriptor to read a given number of
- * contiguous registers to the reg_read_buf pointer
- *
- * @first: offset of the first register in the contiguous block
- * @num_regs: number of registers to read
- * @flags: flags to control DMA descriptor preparation
- */
-static int qcom_read_reg_dma(struct qcom_nand_controller *nandc, int first,
- int num_regs, unsigned int flags)
-{
- bool flow_control = false;
- void *vaddr;
-
- vaddr = nandc->reg_read_buf + nandc->reg_read_pos;
- nandc->reg_read_pos += num_regs;
-
- if (first == NAND_DEV_CMD_VLD || first == NAND_DEV_CMD1)
- first = dev_cmd_reg_addr(nandc, first);
-
- if (nandc->props->supports_bam)
- return qcom_prep_bam_dma_desc_cmd(nandc, true, first, vaddr,
- num_regs, flags);
-
- if (first == NAND_READ_ID || first == NAND_FLASH_STATUS)
- flow_control = true;
-
- return qcom_prep_adm_dma_desc(nandc, true, first, vaddr,
- num_regs * sizeof(u32), flow_control);
-}
-
-/*
- * qcom_write_reg_dma: prepares a descriptor to write a given number of
- * contiguous registers
- *
- * @vaddr: contnigeous memory from where register value will
- * be written
- * @first: offset of the first register in the contiguous block
- * @num_regs: number of registers to write
- * @flags: flags to control DMA descriptor preparation
- */
-static int qcom_write_reg_dma(struct qcom_nand_controller *nandc, __le32 *vaddr,
- int first, int num_regs, unsigned int flags)
-{
- bool flow_control = false;
-
- if (first == NAND_EXEC_CMD)
- flags |= NAND_BAM_NWD;
-
- if (first == NAND_DEV_CMD1_RESTORE || first == NAND_DEV_CMD1)
- first = dev_cmd_reg_addr(nandc, NAND_DEV_CMD1);
-
- if (first == NAND_DEV_CMD_VLD_RESTORE || first == NAND_DEV_CMD_VLD)
- first = dev_cmd_reg_addr(nandc, NAND_DEV_CMD_VLD);
-
- if (nandc->props->supports_bam)
- return qcom_prep_bam_dma_desc_cmd(nandc, false, first, vaddr,
- num_regs, flags);
-
- if (first == NAND_FLASH_CMD)
- flow_control = true;
-
- return qcom_prep_adm_dma_desc(nandc, false, first, vaddr,
- num_regs * sizeof(u32), flow_control);
-}
-
-/*
- * qcom_read_data_dma: prepares a DMA descriptor to transfer data from the
- * controller's internal buffer to the buffer 'vaddr'
- *
- * @reg_off: offset within the controller's data buffer
- * @vaddr: virtual address of the buffer we want to write to
- * @size: DMA transaction size in bytes
- * @flags: flags to control DMA descriptor preparation
- */
-static int qcom_read_data_dma(struct qcom_nand_controller *nandc, int reg_off,
- const u8 *vaddr, int size, unsigned int flags)
-{
- if (nandc->props->supports_bam)
- return qcom_prep_bam_dma_desc_data(nandc, true, vaddr, size, flags);
-
- return qcom_prep_adm_dma_desc(nandc, true, reg_off, vaddr, size, false);
-}
-
-/*
- * qcom_write_data_dma: prepares a DMA descriptor to transfer data from
- * 'vaddr' to the controller's internal buffer
- *
- * @reg_off: offset within the controller's data buffer
- * @vaddr: virtual address of the buffer we want to read from
- * @size: DMA transaction size in bytes
- * @flags: flags to control DMA descriptor preparation
- */
-static int qcom_write_data_dma(struct qcom_nand_controller *nandc, int reg_off,
- const u8 *vaddr, int size, unsigned int flags)
-{
- if (nandc->props->supports_bam)
- return qcom_prep_bam_dma_desc_data(nandc, false, vaddr, size, flags);
-
- return qcom_prep_adm_dma_desc(nandc, false, reg_off, vaddr, size, false);
-}
-
/*
* Helper to prepare DMA descriptors for configuring registers
* before reading a NAND page.
@@ -1253,83 +387,6 @@ static void config_nand_cw_write(struct nand_chip *chip)
NAND_BAM_NEXT_SGL);
}
-/* helpers to submit/free our list of dma descriptors */
-static int qcom_submit_descs(struct qcom_nand_controller *nandc)
-{
- struct desc_info *desc, *n;
- dma_cookie_t cookie = 0;
- struct bam_transaction *bam_txn = nandc->bam_txn;
- int ret = 0;
-
- if (nandc->props->supports_bam) {
- if (bam_txn->rx_sgl_pos > bam_txn->rx_sgl_start) {
- ret = qcom_prepare_bam_async_desc(nandc, nandc->rx_chan, 0);
- if (ret)
- goto err_unmap_free_desc;
- }
-
- if (bam_txn->tx_sgl_pos > bam_txn->tx_sgl_start) {
- ret = qcom_prepare_bam_async_desc(nandc, nandc->tx_chan,
- DMA_PREP_INTERRUPT);
- if (ret)
- goto err_unmap_free_desc;
- }
-
- if (bam_txn->cmd_sgl_pos > bam_txn->cmd_sgl_start) {
- ret = qcom_prepare_bam_async_desc(nandc, nandc->cmd_chan,
- DMA_PREP_CMD);
- if (ret)
- goto err_unmap_free_desc;
- }
- }
-
- list_for_each_entry(desc, &nandc->desc_list, node)
- cookie = dmaengine_submit(desc->dma_desc);
-
- if (nandc->props->supports_bam) {
- bam_txn->last_cmd_desc->callback = qcom_qpic_bam_dma_done;
- bam_txn->last_cmd_desc->callback_param = bam_txn;
-
- dma_async_issue_pending(nandc->tx_chan);
- dma_async_issue_pending(nandc->rx_chan);
- dma_async_issue_pending(nandc->cmd_chan);
-
- if (!wait_for_completion_timeout(&bam_txn->txn_done,
- QPIC_NAND_COMPLETION_TIMEOUT))
- ret = -ETIMEDOUT;
- } else {
- if (dma_sync_wait(nandc->chan, cookie) != DMA_COMPLETE)
- ret = -ETIMEDOUT;
- }
-
-err_unmap_free_desc:
- /*
- * Unmap the dma sg_list and free the desc allocated by both
- * qcom_prepare_bam_async_desc() and qcom_prep_adm_dma_desc() functions.
- */
- list_for_each_entry_safe(desc, n, &nandc->desc_list, node) {
- list_del(&desc->node);
-
- if (nandc->props->supports_bam)
- dma_unmap_sg(nandc->dev, desc->bam_sgl,
- desc->sgl_cnt, desc->dir);
- else
- dma_unmap_sg(nandc->dev, &desc->adm_sgl, 1,
- desc->dir);
-
- kfree(desc);
- }
-
- return ret;
-}
-
-/* reset the register read buffer for next NAND operation */
-static void qcom_clear_read_regs(struct qcom_nand_controller *nandc)
-{
- nandc->reg_read_pos = 0;
- qcom_nandc_dev_to_mem(nandc, false);
-}
-
/*
* when using BCH ECC, the HW flags an error in NAND_FLASH_STATUS if it read
* an erased CW, and reports an erased CW in NAND_ERASED_CW_DETECT_STATUS.
@@ -2956,141 +2013,14 @@ static const struct nand_controller_ops qcom_nandc_ops = {
.exec_op = qcom_nand_exec_op,
};
-static void qcom_nandc_unalloc(struct qcom_nand_controller *nandc)
-{
- if (nandc->props->supports_bam) {
- if (!dma_mapping_error(nandc->dev, nandc->reg_read_dma))
- dma_unmap_single(nandc->dev, nandc->reg_read_dma,
- MAX_REG_RD *
- sizeof(*nandc->reg_read_buf),
- DMA_FROM_DEVICE);
-
- if (nandc->tx_chan)
- dma_release_channel(nandc->tx_chan);
-
- if (nandc->rx_chan)
- dma_release_channel(nandc->rx_chan);
-
- if (nandc->cmd_chan)
- dma_release_channel(nandc->cmd_chan);
- } else {
- if (nandc->chan)
- dma_release_channel(nandc->chan);
- }
-}
-
-static int qcom_nandc_alloc(struct qcom_nand_controller *nandc)
-{
- int ret;
-
- ret = dma_set_coherent_mask(nandc->dev, DMA_BIT_MASK(32));
- if (ret) {
- dev_err(nandc->dev, "failed to set DMA mask\n");
- return ret;
- }
-
- /*
- * we use the internal buffer for reading ONFI params, reading small
- * data like ID and status, and preforming read-copy-write operations
- * when writing to a codeword partially. 532 is the maximum possible
- * size of a codeword for our nand controller
- */
- nandc->buf_size = 532;
-
- nandc->data_buffer = devm_kzalloc(nandc->dev, nandc->buf_size, GFP_KERNEL);
- if (!nandc->data_buffer)
- return -ENOMEM;
-
- nandc->regs = devm_kzalloc(nandc->dev, sizeof(*nandc->regs), GFP_KERNEL);
- if (!nandc->regs)
- return -ENOMEM;
-
- nandc->reg_read_buf = devm_kcalloc(nandc->dev, MAX_REG_RD,
- sizeof(*nandc->reg_read_buf),
- GFP_KERNEL);
- if (!nandc->reg_read_buf)
- return -ENOMEM;
-
- if (nandc->props->supports_bam) {
- nandc->reg_read_dma =
- dma_map_single(nandc->dev, nandc->reg_read_buf,
- MAX_REG_RD *
- sizeof(*nandc->reg_read_buf),
- DMA_FROM_DEVICE);
- if (dma_mapping_error(nandc->dev, nandc->reg_read_dma)) {
- dev_err(nandc->dev, "failed to DMA MAP reg buffer\n");
- return -EIO;
- }
-
- nandc->tx_chan = dma_request_chan(nandc->dev, "tx");
- if (IS_ERR(nandc->tx_chan)) {
- ret = PTR_ERR(nandc->tx_chan);
- nandc->tx_chan = NULL;
- dev_err_probe(nandc->dev, ret,
- "tx DMA channel request failed\n");
- goto unalloc;
- }
-
- nandc->rx_chan = dma_request_chan(nandc->dev, "rx");
- if (IS_ERR(nandc->rx_chan)) {
- ret = PTR_ERR(nandc->rx_chan);
- nandc->rx_chan = NULL;
- dev_err_probe(nandc->dev, ret,
- "rx DMA channel request failed\n");
- goto unalloc;
- }
-
- nandc->cmd_chan = dma_request_chan(nandc->dev, "cmd");
- if (IS_ERR(nandc->cmd_chan)) {
- ret = PTR_ERR(nandc->cmd_chan);
- nandc->cmd_chan = NULL;
- dev_err_probe(nandc->dev, ret,
- "cmd DMA channel request failed\n");
- goto unalloc;
- }
-
- /*
- * Initially allocate BAM transaction to read ONFI param page.
- * After detecting all the devices, this BAM transaction will
- * be freed and the next BAM transaction will be allocated with
- * maximum codeword size
- */
- nandc->max_cwperpage = 1;
- nandc->bam_txn = qcom_alloc_bam_transaction(nandc);
- if (!nandc->bam_txn) {
- dev_err(nandc->dev,
- "failed to allocate bam transaction\n");
- ret = -ENOMEM;
- goto unalloc;
- }
- } else {
- nandc->chan = dma_request_chan(nandc->dev, "rxtx");
- if (IS_ERR(nandc->chan)) {
- ret = PTR_ERR(nandc->chan);
- nandc->chan = NULL;
- dev_err_probe(nandc->dev, ret,
- "rxtx DMA channel request failed\n");
- return ret;
- }
- }
-
- INIT_LIST_HEAD(&nandc->desc_list);
- INIT_LIST_HEAD(&nandc->host_list);
-
- nand_controller_init(&nandc->controller);
- nandc->controller.ops = &qcom_nandc_ops;
-
- return 0;
-unalloc:
- qcom_nandc_unalloc(nandc);
- return ret;
-}
-
/* one time setup of a few nand controller registers */
static int qcom_nandc_setup(struct qcom_nand_controller *nandc)
{
u32 nand_ctrl;
+ nand_controller_init(&nandc->controller);
+ nandc->controller.ops = &qcom_nandc_ops;
+
/* kill onenand */
if (!nandc->props->nandc_part_of_qpic)
nandc_write(nandc, SFLASHC_BURST_CFG, 0);
diff --git a/include/linux/mtd/nand-qpic-common.h b/include/linux/mtd/nand-qpic-common.h
new file mode 100644
index 000000000000..096c15d3be76
--- /dev/null
+++ b/include/linux/mtd/nand-qpic-common.h
@@ -0,0 +1,467 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * QCOM QPIC common APIs header file
+ *
+ * Copyright (c) 2023 Qualcomm Inc.
+ * Authors: Md sadre Alam <quic_mdalam@quicinc.com>
+ *
+ */
+#ifndef __MTD_NAND_QPIC_COMMON_H__
+#define __MTD_NAND_QPIC_COMMON_H__
+
+/* NANDc reg offsets */
+#define NAND_FLASH_CMD 0x00
+#define NAND_ADDR0 0x04
+#define NAND_ADDR1 0x08
+#define NAND_FLASH_CHIP_SELECT 0x0c
+#define NAND_EXEC_CMD 0x10
+#define NAND_FLASH_STATUS 0x14
+#define NAND_BUFFER_STATUS 0x18
+#define NAND_DEV0_CFG0 0x20
+#define NAND_DEV0_CFG1 0x24
+#define NAND_DEV0_ECC_CFG 0x28
+#define NAND_AUTO_STATUS_EN 0x2c
+#define NAND_DEV1_CFG0 0x30
+#define NAND_DEV1_CFG1 0x34
+#define NAND_READ_ID 0x40
+#define NAND_READ_STATUS 0x44
+#define NAND_DEV_CMD0 0xa0
+#define NAND_DEV_CMD1 0xa4
+#define NAND_DEV_CMD2 0xa8
+#define NAND_DEV_CMD_VLD 0xac
+#define SFLASHC_BURST_CFG 0xe0
+#define NAND_ERASED_CW_DETECT_CFG 0xe8
+#define NAND_ERASED_CW_DETECT_STATUS 0xec
+#define NAND_EBI2_ECC_BUF_CFG 0xf0
+#define FLASH_BUF_ACC 0x100
+
+#define NAND_CTRL 0xf00
+#define NAND_VERSION 0xf08
+#define NAND_READ_LOCATION_0 0xf20
+#define NAND_READ_LOCATION_1 0xf24
+#define NAND_READ_LOCATION_2 0xf28
+#define NAND_READ_LOCATION_3 0xf2c
+#define NAND_READ_LOCATION_LAST_CW_0 0xf40
+#define NAND_READ_LOCATION_LAST_CW_1 0xf44
+#define NAND_READ_LOCATION_LAST_CW_2 0xf48
+#define NAND_READ_LOCATION_LAST_CW_3 0xf4c
+
+/* dummy register offsets, used by qcom_write_reg_dma */
+#define NAND_DEV_CMD1_RESTORE 0xdead
+#define NAND_DEV_CMD_VLD_RESTORE 0xbeef
+
+/* NAND_FLASH_CMD bits */
+#define PAGE_ACC BIT(4)
+#define LAST_PAGE BIT(5)
+
+/* NAND_FLASH_CHIP_SELECT bits */
+#define NAND_DEV_SEL 0
+#define DM_EN BIT(2)
+
+/* NAND_FLASH_STATUS bits */
+#define FS_OP_ERR BIT(4)
+#define FS_READY_BSY_N BIT(5)
+#define FS_MPU_ERR BIT(8)
+#define FS_DEVICE_STS_ERR BIT(16)
+#define FS_DEVICE_WP BIT(23)
+
+/* NAND_BUFFER_STATUS bits */
+#define BS_UNCORRECTABLE_BIT BIT(8)
+#define BS_CORRECTABLE_ERR_MSK 0x1f
+
+/* NAND_DEVn_CFG0 bits */
+#define DISABLE_STATUS_AFTER_WRITE 4
+#define CW_PER_PAGE 6
+#define UD_SIZE_BYTES 9
+#define UD_SIZE_BYTES_MASK GENMASK(18, 9)
+#define ECC_PARITY_SIZE_BYTES_RS 19
+#define SPARE_SIZE_BYTES 23
+#define SPARE_SIZE_BYTES_MASK GENMASK(26, 23)
+#define NUM_ADDR_CYCLES 27
+#define STATUS_BFR_READ 30
+#define SET_RD_MODE_AFTER_STATUS 31
+
+/* NAND_DEVn_CFG0 bits */
+#define DEV0_CFG1_ECC_DISABLE 0
+#define WIDE_FLASH 1
+#define NAND_RECOVERY_CYCLES 2
+#define CS_ACTIVE_BSY 5
+#define BAD_BLOCK_BYTE_NUM 6
+#define BAD_BLOCK_IN_SPARE_AREA 16
+#define WR_RD_BSY_GAP 17
+#define ENABLE_BCH_ECC 27
+
+/* NAND_DEV0_ECC_CFG bits */
+#define ECC_CFG_ECC_DISABLE 0
+#define ECC_SW_RESET 1
+#define ECC_MODE 4
+#define ECC_PARITY_SIZE_BYTES_BCH 8
+#define ECC_NUM_DATA_BYTES 16
+#define ECC_NUM_DATA_BYTES_MASK GENMASK(25, 16)
+#define ECC_FORCE_CLK_OPEN 30
+
+/* NAND_DEV_CMD1 bits */
+#define READ_ADDR 0
+
+/* NAND_DEV_CMD_VLD bits */
+#define READ_START_VLD BIT(0)
+#define READ_STOP_VLD BIT(1)
+#define WRITE_START_VLD BIT(2)
+#define ERASE_START_VLD BIT(3)
+#define SEQ_READ_START_VLD BIT(4)
+
+/* NAND_EBI2_ECC_BUF_CFG bits */
+#define NUM_STEPS 0
+
+/* NAND_ERASED_CW_DETECT_CFG bits */
+#define ERASED_CW_ECC_MASK 1
+#define AUTO_DETECT_RES 0
+#define MASK_ECC BIT(ERASED_CW_ECC_MASK)
+#define RESET_ERASED_DET BIT(AUTO_DETECT_RES)
+#define ACTIVE_ERASED_DET (0 << AUTO_DETECT_RES)
+#define CLR_ERASED_PAGE_DET (RESET_ERASED_DET | MASK_ECC)
+#define SET_ERASED_PAGE_DET (ACTIVE_ERASED_DET | MASK_ECC)
+
+/* NAND_ERASED_CW_DETECT_STATUS bits */
+#define PAGE_ALL_ERASED BIT(7)
+#define CODEWORD_ALL_ERASED BIT(6)
+#define PAGE_ERASED BIT(5)
+#define CODEWORD_ERASED BIT(4)
+#define ERASED_PAGE (PAGE_ALL_ERASED | PAGE_ERASED)
+#define ERASED_CW (CODEWORD_ALL_ERASED | CODEWORD_ERASED)
+
+/* NAND_READ_LOCATION_n bits */
+#define READ_LOCATION_OFFSET 0
+#define READ_LOCATION_SIZE 16
+#define READ_LOCATION_LAST 31
+
+/* Version Mask */
+#define NAND_VERSION_MAJOR_MASK 0xf0000000
+#define NAND_VERSION_MAJOR_SHIFT 28
+#define NAND_VERSION_MINOR_MASK 0x0fff0000
+#define NAND_VERSION_MINOR_SHIFT 16
+
+/* NAND OP_CMDs */
+#define OP_PAGE_READ 0x2
+#define OP_PAGE_READ_WITH_ECC 0x3
+#define OP_PAGE_READ_WITH_ECC_SPARE 0x4
+#define OP_PAGE_READ_ONFI_READ 0x5
+#define OP_PROGRAM_PAGE 0x6
+#define OP_PAGE_PROGRAM_WITH_ECC 0x7
+#define OP_PROGRAM_PAGE_SPARE 0x9
+#define OP_BLOCK_ERASE 0xa
+#define OP_CHECK_STATUS 0xc
+#define OP_FETCH_ID 0xb
+#define OP_RESET_DEVICE 0xd
+
+/* Default Value for NAND_DEV_CMD_VLD */
+#define NAND_DEV_CMD_VLD_VAL (READ_START_VLD | WRITE_START_VLD | \
+ ERASE_START_VLD | SEQ_READ_START_VLD)
+
+/* NAND_CTRL bits */
+#define BAM_MODE_EN BIT(0)
+
+/*
+ * the NAND controller performs reads/writes with ECC in 516 byte chunks.
+ * the driver calls the chunks 'step' or 'codeword' interchangeably
+ */
+#define NANDC_STEP_SIZE 512
+
+/*
+ * the largest page size we support is 8K, this will have 16 steps/codewords
+ * of 512 bytes each
+ */
+#define MAX_NUM_STEPS (SZ_8K / NANDC_STEP_SIZE)
+
+/* we read at most 3 registers per codeword scan */
+#define MAX_REG_RD (3 * MAX_NUM_STEPS)
+
+/* ECC modes supported by the controller */
+#define ECC_NONE BIT(0)
+#define ECC_RS_4BIT BIT(1)
+#define ECC_BCH_4BIT BIT(2)
+#define ECC_BCH_8BIT BIT(3)
+
+/*
+ * Returns the actual register address for all NAND_DEV_ registers
+ * (i.e. NAND_DEV_CMD0, NAND_DEV_CMD1, NAND_DEV_CMD2 and NAND_DEV_CMD_VLD)
+ */
+#define dev_cmd_reg_addr(nandc, reg) ((nandc)->props->dev_cmd_reg_start + (reg))
+
+/* Returns the NAND register physical address */
+#define nandc_reg_phys(chip, offset) ((chip)->base_phys + (offset))
+
+/* Returns the dma address for reg read buffer */
+#define reg_buf_dma_addr(chip, vaddr) \
+ ((chip)->reg_read_dma + \
+ ((u8 *)(vaddr) - (u8 *)(chip)->reg_read_buf))
+
+#define QPIC_PER_CW_CMD_ELEMENTS 32
+#define QPIC_PER_CW_CMD_SGL 32
+#define QPIC_PER_CW_DATA_SGL 8
+
+#define QPIC_NAND_COMPLETION_TIMEOUT msecs_to_jiffies(2000)
+
+/*
+ * Flags used in DMA descriptor preparation helper functions
+ * (i.e. qcom_read_reg_dma/qcom_write_reg_dma/qcom_read_data_dma/qcom_write_data_dma)
+ */
+/* Don't set the EOT in current tx BAM sgl */
+#define NAND_BAM_NO_EOT BIT(0)
+/* Set the NWD flag in current BAM sgl */
+#define NAND_BAM_NWD BIT(1)
+/* Finish writing in the current BAM sgl and start writing in another BAM sgl */
+#define NAND_BAM_NEXT_SGL BIT(2)
+/*
+ * Erased codeword status is being used two times in single transfer so this
+ * flag will determine the current value of erased codeword status register
+ */
+#define NAND_ERASED_CW_SET BIT(4)
+
+#define MAX_ADDRESS_CYCLE 5
+
+/*
+ * This data type corresponds to the BAM transaction which will be used for all
+ * NAND transfers.
+ * @bam_ce - the array of BAM command elements
+ * @cmd_sgl - sgl for NAND BAM command pipe
+ * @data_sgl - sgl for NAND BAM consumer/producer pipe
+ * @last_data_desc - last DMA desc in data channel (tx/rx).
+ * @last_cmd_desc - last DMA desc in command channel.
+ * @txn_done - completion for NAND transfer.
+ * @bam_ce_pos - the index in bam_ce which is available for next sgl
+ * @bam_ce_start - the index in bam_ce which marks the start position ce
+ * for current sgl. It will be used for size calculation
+ * for current sgl
+ * @cmd_sgl_pos - current index in command sgl.
+ * @cmd_sgl_start - start index in command sgl.
+ * @tx_sgl_pos - current index in data sgl for tx.
+ * @tx_sgl_start - start index in data sgl for tx.
+ * @rx_sgl_pos - current index in data sgl for rx.
+ * @rx_sgl_start - start index in data sgl for rx.
+ */
+struct bam_transaction {
+ struct bam_cmd_element *bam_ce;
+ struct scatterlist *cmd_sgl;
+ struct scatterlist *data_sgl;
+ struct dma_async_tx_descriptor *last_data_desc;
+ struct dma_async_tx_descriptor *last_cmd_desc;
+ struct completion txn_done;
+ u32 bam_ce_pos;
+ u32 bam_ce_start;
+ u32 cmd_sgl_pos;
+ u32 cmd_sgl_start;
+ u32 tx_sgl_pos;
+ u32 tx_sgl_start;
+ u32 rx_sgl_pos;
+ u32 rx_sgl_start;
+};
+
+/*
+ * This data type corresponds to the nand dma descriptor
+ * @dma_desc - low level DMA engine descriptor
+ * @list - list for desc_info
+ *
+ * @adm_sgl - sgl which will be used for single sgl dma descriptor. Only used by
+ * ADM
+ * @bam_sgl - sgl which will be used for dma descriptor. Only used by BAM
+ * @sgl_cnt - number of SGL in bam_sgl. Only used by BAM
+ * @dir - DMA transfer direction
+ */
+struct desc_info {
+ struct dma_async_tx_descriptor *dma_desc;
+ struct list_head node;
+
+ union {
+ struct scatterlist adm_sgl;
+ struct {
+ struct scatterlist *bam_sgl;
+ int sgl_cnt;
+ };
+ };
+ enum dma_data_direction dir;
+};
+
+/*
+ * holds the current register values that we want to write. acts as a contiguous
+ * chunk of memory which we use to write the controller registers through DMA.
+ */
+struct nandc_regs {
+ __le32 cmd;
+ __le32 addr0;
+ __le32 addr1;
+ __le32 chip_sel;
+ __le32 exec;
+
+ __le32 cfg0;
+ __le32 cfg1;
+ __le32 ecc_bch_cfg;
+
+ __le32 clrflashstatus;
+ __le32 clrreadstatus;
+
+ __le32 cmd1;
+ __le32 vld;
+
+ __le32 orig_cmd1;
+ __le32 orig_vld;
+
+ __le32 ecc_buf_cfg;
+ __le32 read_location0;
+ __le32 read_location1;
+ __le32 read_location2;
+ __le32 read_location3;
+ __le32 read_location_last0;
+ __le32 read_location_last1;
+ __le32 read_location_last2;
+ __le32 read_location_last3;
+
+ __le32 erased_cw_detect_cfg_clr;
+ __le32 erased_cw_detect_cfg_set;
+};
+
+/*
+ * NAND controller data struct
+ *
+ * @dev: parent device
+ *
+ * @base: MMIO base
+ *
+ * @core_clk: controller clock
+ * @aon_clk: another controller clock
+ *
+ * @regs: a contiguous chunk of memory for DMA register
+ * writes. contains the register values to be
+ * written to controller
+ *
+ * @props: properties of current NAND controller,
+ * initialized via DT match data
+ *
+ * @controller: base controller structure
+ * @host_list: list containing all the chips attached to the
+ * controller
+ *
+ * @chan: dma channel
+ * @cmd_crci: ADM DMA CRCI for command flow control
+ * @data_crci: ADM DMA CRCI for data flow control
+ *
+ * @desc_list: DMA descriptor list (list of desc_infos)
+ *
+ * @data_buffer: our local DMA buffer for page read/writes,
+ * used when we can't use the buffer provided
+ * by upper layers directly
+ * @reg_read_buf: local buffer for reading back registers via DMA
+ *
+ * @base_phys: physical base address of controller registers
+ * @base_dma: dma base address of controller registers
+ * @reg_read_dma: contains dma address for register read buffer
+ *
+ * @buf_size/count/start: markers for chip->legacy.read_buf/write_buf
+ * functions
+ * @max_cwperpage: maximum QPIC codewords required. calculated
+ * from all connected NAND devices pagesize
+ *
+ * @reg_read_pos: marker for data read in reg_read_buf
+ *
+ * @cmd1/vld: some fixed controller register values
+ *
+ * @exec_opwrite: flag to select correct number of code word
+ * while reading status
+ */
+struct qcom_nand_controller {
+ struct device *dev;
+
+ void __iomem *base;
+
+ struct clk *core_clk;
+ struct clk *aon_clk;
+
+ struct nandc_regs *regs;
+ struct bam_transaction *bam_txn;
+
+ const struct qcom_nandc_props *props;
+
+ struct nand_controller controller;
+ struct list_head host_list;
+
+ union {
+ /* will be used only by QPIC for BAM DMA */
+ struct {
+ struct dma_chan *tx_chan;
+ struct dma_chan *rx_chan;
+ struct dma_chan *cmd_chan;
+ };
+
+ /* will be used only by EBI2 for ADM DMA */
+ struct {
+ struct dma_chan *chan;
+ unsigned int cmd_crci;
+ unsigned int data_crci;
+ };
+ };
+
+ struct list_head desc_list;
+
+ u8 *data_buffer;
+ __le32 *reg_read_buf;
+
+ phys_addr_t base_phys;
+ dma_addr_t base_dma;
+ dma_addr_t reg_read_dma;
+
+ int buf_size;
+ int buf_count;
+ int buf_start;
+ unsigned int max_cwperpage;
+
+ int reg_read_pos;
+
+ u32 cmd1, vld;
+ bool exec_opwrite;
+};
+
+/*
+ * This data type corresponds to the NAND controller properties which varies
+ * among different NAND controllers.
+ * @ecc_modes - ecc mode for NAND
+ * @dev_cmd_reg_start - NAND_DEV_CMD_* registers starting offset
+ * @supports_bam - whether NAND controller is using BAM
+ * @nandc_part_of_qpic - whether NAND controller is part of qpic IP
+ * @qpic_version2 - flag to indicate QPIC IP version 2
+ * @use_codeword_fixup - whether NAND has different layout for boot partitions
+ */
+struct qcom_nandc_props {
+ u32 ecc_modes;
+ u32 dev_cmd_reg_start;
+ bool supports_bam;
+ bool nandc_part_of_qpic;
+ bool qpic_version2;
+ bool use_codeword_fixup;
+};
+
+void qcom_free_bam_transaction(struct qcom_nand_controller *nandc);
+struct bam_transaction *qcom_alloc_bam_transaction(struct qcom_nand_controller *nandc);
+void qcom_clear_bam_transaction(struct qcom_nand_controller *nandc);
+void qcom_qpic_bam_dma_done(void *data);
+inline void qcom_nandc_dev_to_mem(struct qcom_nand_controller *nandc, bool is_cpu);
+int qcom_prepare_bam_async_desc(struct qcom_nand_controller *nandc,
+ struct dma_chan *chan, unsigned long flags);
+int qcom_prep_bam_dma_desc_cmd(struct qcom_nand_controller *nandc, bool read,
+ int reg_off, const void *vaddr, int size, unsigned int flags);
+int qcom_prep_bam_dma_desc_data(struct qcom_nand_controller *nandc, bool read,
+ const void *vaddr, int size, unsigned int flags);
+int qcom_prep_adm_dma_desc(struct qcom_nand_controller *nandc, bool read, int reg_off,
+ const void *vaddr, int size, bool flow_control);
+int qcom_read_reg_dma(struct qcom_nand_controller *nandc, int first, int num_regs,
+ unsigned int flags);
+int qcom_write_reg_dma(struct qcom_nand_controller *nandc, __le32 *vaddr, int first,
+ int num_regs, unsigned int flags);
+int qcom_read_data_dma(struct qcom_nand_controller *nandc, int reg_off, const u8 *vaddr,
+ int size, unsigned int flags);
+int qcom_write_data_dma(struct qcom_nand_controller *nandc, int reg_off, const u8 *vaddr,
+ int size, unsigned int flags);
+int qcom_submit_descs(struct qcom_nand_controller *nandc);
+void qcom_clear_read_regs(struct qcom_nand_controller *nandc);
+void qcom_nandc_unalloc(struct qcom_nand_controller *nandc);
+int qcom_nandc_alloc(struct qcom_nand_controller *nandc);
+#endif
--
2.34.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* Re: [PATCH v5 4/7] drivers: mtd: nand: Add qpic_common API file
2024-05-08 8:36 ` [PATCH v5 4/7] drivers: mtd: nand: Add qpic_common API file Md Sadre Alam
@ 2024-05-16 12:37 ` Miquel Raynal
2024-05-20 9:51 ` Md Sadre Alam
0 siblings, 1 reply; 16+ messages in thread
From: Miquel Raynal @ 2024-05-16 12:37 UTC (permalink / raw)
To: Md Sadre Alam
Cc: broonie, robh, krzk+dt, conor+dt, andersson, konrad.dybcio,
richard, vigneshr, manivannan.sadhasivam, linux-arm-msm,
linux-spi, devicetree, linux-kernel, linux-mtd, quic_srichara,
quic_varada, Alexandru Gagniuc
Hello,
> --- a/drivers/mtd/nand/Kconfig
> +++ b/drivers/mtd/nand/Kconfig
> @@ -61,6 +61,14 @@ config MTD_NAND_ECC_MEDIATEK
> help
> This enables support for the hardware ECC engine from Mediatek.
>
> +config QPIC_COMMON
> + tristate "QPIC common api file"
> + depends on ARCH_QCOM || COMPILE_TEST
> + help
> + This enables support for common api for qpic nand controller.
> + common apis will be used by both raw nand driver and serial nand
> + driver.
This should probably not be a standalone selectable item. Make it
automatically selected by the users including the common header.
> +
> endmenu
>
> endmenu
> diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
> index 19e1291ac4d5..c0c1f8bd0220 100644
> --- a/drivers/mtd/nand/Makefile
> +++ b/drivers/mtd/nand/Makefile
> @@ -3,6 +3,7 @@
> nandcore-objs := core.o bbt.o
> obj-$(CONFIG_MTD_NAND_CORE) += nandcore.o
> obj-$(CONFIG_MTD_NAND_ECC_MEDIATEK) += ecc-mtk.o
> +obj-$(CONFIG_QPIC_COMMON) += qpic_common.o
>
> obj-y += onenand/
> obj-y += raw/
> diff --git a/drivers/mtd/nand/qpic_common.c b/drivers/mtd/nand/qpic_common.c
> new file mode 100644
> index 000000000000..d48892141365
> --- /dev/null
> +++ b/drivers/mtd/nand/qpic_common.c
> @@ -0,0 +1,741 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2016, The Linux Foundation. All rights reserved.
> + */
> +#include <linux/bitops.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/dmaengine.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/dma/qcom_adm.h>
> +#include <linux/dma/qcom_bam_dma.h>
> +#include <linux/module.h>
> +#include <linux/mtd/partitions.h>
> +#include <linux/mtd/rawnand.h>
No raw NAND include in the common file. If there is something raw NAND
specific, it should not be here.
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/mtd/nand-qpic-common.h>
Thanks,
Miquèl
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH v5 4/7] drivers: mtd: nand: Add qpic_common API file
2024-05-16 12:37 ` Miquel Raynal
@ 2024-05-20 9:51 ` Md Sadre Alam
0 siblings, 0 replies; 16+ messages in thread
From: Md Sadre Alam @ 2024-05-20 9:51 UTC (permalink / raw)
To: Miquel Raynal
Cc: broonie, robh, krzk+dt, conor+dt, andersson, konrad.dybcio,
richard, vigneshr, manivannan.sadhasivam, linux-arm-msm,
linux-spi, devicetree, linux-kernel, linux-mtd, quic_srichara,
quic_varada, Alexandru Gagniuc
On 5/16/2024 6:07 PM, Miquel Raynal wrote:
> Hello,
>
>> --- a/drivers/mtd/nand/Kconfig
>> +++ b/drivers/mtd/nand/Kconfig
>> @@ -61,6 +61,14 @@ config MTD_NAND_ECC_MEDIATEK
>> help
>> This enables support for the hardware ECC engine from Mediatek.
>>
>> +config QPIC_COMMON
>> + tristate "QPIC common api file"
>> + depends on ARCH_QCOM || COMPILE_TEST
>> + help
>> + This enables support for common api for qpic nand controller.
>> + common apis will be used by both raw nand driver and serial nand
>> + driver.
>
> This should probably not be a standalone selectable item. Make it
> automatically selected by the users including the common header.
Ok.
>
>> +
>> endmenu
>>
>> endmenu
>> diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
>> index 19e1291ac4d5..c0c1f8bd0220 100644
>> --- a/drivers/mtd/nand/Makefile
>> +++ b/drivers/mtd/nand/Makefile
>> @@ -3,6 +3,7 @@
>> nandcore-objs := core.o bbt.o
>> obj-$(CONFIG_MTD_NAND_CORE) += nandcore.o
>> obj-$(CONFIG_MTD_NAND_ECC_MEDIATEK) += ecc-mtk.o
>> +obj-$(CONFIG_QPIC_COMMON) += qpic_common.o
>>
>> obj-y += onenand/
>> obj-y += raw/
>> diff --git a/drivers/mtd/nand/qpic_common.c b/drivers/mtd/nand/qpic_common.c
>> new file mode 100644
>> index 000000000000..d48892141365
>> --- /dev/null
>> +++ b/drivers/mtd/nand/qpic_common.c
>> @@ -0,0 +1,741 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2016, The Linux Foundation. All rights reserved.
>> + */
>> +#include <linux/bitops.h>
>> +#include <linux/clk.h>
>> +#include <linux/delay.h>
>> +#include <linux/dmaengine.h>
>> +#include <linux/dma-mapping.h>
>> +#include <linux/dma/qcom_adm.h>
>> +#include <linux/dma/qcom_bam_dma.h>
>> +#include <linux/module.h>
>> +#include <linux/mtd/partitions.h>
>> +#include <linux/mtd/rawnand.h>
>
> No raw NAND include in the common file. If there is something raw NAND
> specific, it should not be here.
Ok , will fix in next patch
>
>> +#include <linux/of.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/slab.h>
>> +#include <linux/mtd/nand-qpic-common.h>
>
> Thanks,
> Miquèl
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH v5 5/7] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface
2024-05-08 8:36 [PATCH v5 0/7] Add QPIC SPI NAND driver Md Sadre Alam
` (3 preceding siblings ...)
2024-05-08 8:36 ` [PATCH v5 4/7] drivers: mtd: nand: Add qpic_common API file Md Sadre Alam
@ 2024-05-08 8:36 ` Md Sadre Alam
2024-05-16 12:56 ` Miquel Raynal
2024-05-08 8:36 ` [PATCH v5 6/7] arm64: dts: qcom: ipq9574: Add SPI nand support Md Sadre Alam
2024-05-08 8:36 ` [PATCH v5 7/7] arm64: dts: qcom: ipq9574: Disable eMMC node Md Sadre Alam
6 siblings, 1 reply; 16+ messages in thread
From: Md Sadre Alam @ 2024-05-08 8:36 UTC (permalink / raw)
To: broonie, robh, krzk+dt, conor+dt, andersson, konrad.dybcio,
miquel.raynal, richard, vigneshr, manivannan.sadhasivam,
linux-arm-msm, linux-spi, devicetree, linux-kernel, linux-mtd
Cc: quic_srichara, quic_varada, quic_mdalam, Alexandru Gagniuc
This driver implements support for the SPI-NAND mode of QCOM NAND Flash
Interface as a SPI-MEM controller with pipelined ECC capability.
Tested-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Co-developed-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Co-developed-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
---
Change in [v5]
* Added raw_read() and raw_write() api
* Updated commit message
* Removed register indirection
* Added qcom_spi_ prefix to all the api
* Removed snand_set_reg() api.
* Fixed nandbiterr issue
* Removed hardcoded num_cw and made it variable
* Removed hardcoded value for mtd pagesize
* Added -ENOSUPPORT in cmd mapping for unsupported
commands
* Replace if..else with switch..case statement
Change in [v4]
* No change
Change in [v3]
* Set SPI_QPIC_SNAND to n and added COMPILE_TEST in Kconfig
* Made driver name sorted in Make file
* Made comment like c++
* Changed macro to functions, snandc_set_read_loc_last()
and snandc_set_read_loc_first()
* Added error handling in snandc_set_reg()
* Changed into normal conditional statement for
return snandc->ecc_stats.failed ? -EBADMSG :
snandc->ecc_stats.bitflips;
* Remove cast of wbuf in qpic_snand_program_execute()
function
* Made num_cw variable instead hardcoded value
* changed if..else condition of function qpic_snand_io_op()
to switch..case statement
* Added __devm_spi_alloc_controller() api instead of
devm_spi_alloc_master()
* Disabling clock in remove path
Change in [v2]
* Added initial support for SPI-NAND driver
Change in [v1]
* Added RFC patch for design review
drivers/spi/Kconfig | 8 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-qpic-snand.c | 1423 ++++++++++++++++++++++++++
include/linux/mtd/nand-qpic-common.h | 64 ++
4 files changed, 1496 insertions(+)
create mode 100644 drivers/spi/spi-qpic-snand.c
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index a2c99ff33e0a..a5d33fd57d52 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -892,6 +892,14 @@ config SPI_QCOM_QSPI
help
QSPI(Quad SPI) driver for Qualcomm QSPI controller.
+config SPI_QPIC_SNAND
+ tristate "QPIC SNAND controller"
+ depends on (ARCH_QCOM || COMPILE_TEST) && QPIC_COMMON
+ help
+ QPIC_SNAND (QPIC SPI NAND) driver for Qualcomm QPIC controller.
+ QPIC controller supports both parallel nand and serial nand.
+ This config will enable serial nand driver for QPIC controller.
+
config SPI_QUP
tristate "Qualcomm SPI controller with QUP interface"
depends on ARCH_QCOM || COMPILE_TEST
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index e694254dec04..536292292bc5 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -112,6 +112,7 @@ obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx-platform.o
obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
obj-$(CONFIG_SPI_QCOM_GENI) += spi-geni-qcom.o
obj-$(CONFIG_SPI_QCOM_QSPI) += spi-qcom-qspi.o
+obj-$(CONFIG_SPI_QPIC_SNAND) += spi-qpic-snand.o
obj-$(CONFIG_SPI_QUP) += spi-qup.o
obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o
obj-$(CONFIG_SPI_ROCKCHIP_SFC) += spi-rockchip-sfc.o
diff --git a/drivers/spi/spi-qpic-snand.c b/drivers/spi/spi-qpic-snand.c
new file mode 100644
index 000000000000..f32fa5e40937
--- /dev/null
+++ b/drivers/spi/spi-qpic-snand.c
@@ -0,0 +1,1423 @@
+/*
+ * SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ *
+ * Authors:
+ * Md Sadre Alam <quic_mdalam@quicinc.com>
+ * Sricharan R <quic_srichara@quicinc.com>
+ * Varadarajan Narayanan <quic_varada@quicinc.com>
+ */
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/dma/qcom_adm.h>
+#include <linux/dma/qcom_bam_dma.h>
+#include <linux/module.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/mtd/nand-qpic-common.h>
+#include <linux/mtd/spinand.h>
+
+#define NAND_FLASH_SPI_CFG 0xc0
+#define NAND_NUM_ADDR_CYCLES 0xc4
+#define NAND_BUSY_CHECK_WAIT_CNT 0xc8
+#define NAND_FLASH_FEATURES 0xf64
+
+/* QSPI NAND config reg bits */
+#define LOAD_CLK_CNTR_INIT_EN BIT(28)
+#define CLK_CNTR_INIT_VAL_VEC 0x924
+#define FEA_STATUS_DEV_ADDR 0xc0
+#define SPI_CFG BIT(0)
+#define SPI_NUM_ADDR 0xDA4DB
+#define SPI_WAIT_CNT 0x10
+#define QPIC_QSPI_NUM_CS 1
+#define SPI_TRANSFER_MODE_x1 BIT(29)
+#define SPI_TRANSFER_MODE_x4 (3 << 29)
+#define SPI_WP BIT(28)
+#define SPI_HOLD BIT(27)
+#define QPIC_SET_FEATURE BIT(31)
+
+#define SPINAND_RESET 0xff
+#define SPINAND_READID 0x9f
+#define SPINAND_GET_FEATURE 0x0f
+#define SPINAND_SET_FEATURE 0x1f
+#define SPINAND_READ 0x13
+#define SPINAND_ERASE 0xd8
+#define SPINAND_WRITE_EN 0x06
+#define SPINAND_PROGRAM_EXECUTE 0x10
+#define SPINAND_PROGRAM_LOAD 0x84
+
+#define ACC_FEATURE 0xe
+#define BAD_BLOCK_MARKER_SIZE 0x2
+#define OOB_BUF_SIZE 128
+
+struct qpic_snand_op {
+ u32 cmd_reg;
+ u32 addr1_reg;
+ u32 addr2_reg;
+};
+
+struct snandc_read_status {
+ __le32 snandc_flash;
+ __le32 snandc_buffer;
+ __le32 snandc_erased_cw;
+};
+
+static void qcom_spi_set_read_loc_first(struct qcom_nand_controller *snandc,
+ int reg, int cw_offset, int read_size,
+ int is_last_read_loc)
+{
+ int val = (((cw_offset) << READ_LOCATION_OFFSET) |
+ ((read_size) << READ_LOCATION_SIZE) | ((is_last_read_loc)
+ << READ_LOCATION_LAST));
+
+ if (reg == NAND_READ_LOCATION_0)
+ snandc->regs->read_location0 = val;
+ else if (reg == NAND_READ_LOCATION_1)
+ snandc->regs->read_location1 = val;
+ else if (reg == NAND_READ_LOCATION_2)
+ snandc->regs->read_location1 = val;
+ else if (reg == NAND_READ_LOCATION_3)
+ snandc->regs->read_location3 = val;
+}
+
+static void qcom_spi_set_read_loc_last(struct qcom_nand_controller *snandc,
+ int reg, int cw_offset, int read_size,
+ int is_last_read_loc)
+{
+ int val = (((cw_offset) << READ_LOCATION_OFFSET) |
+ ((read_size) << READ_LOCATION_SIZE) | ((is_last_read_loc)
+ << READ_LOCATION_LAST));
+
+ if (reg == NAND_READ_LOCATION_LAST_CW_0)
+ snandc->regs->read_location_last0 = val;
+ else if (reg == NAND_READ_LOCATION_LAST_CW_1)
+ snandc->regs->read_location_last1 = val;
+ else if (reg == NAND_READ_LOCATION_LAST_CW_2)
+ snandc->regs->read_location_last2 = val;
+ else if (reg == NAND_READ_LOCATION_LAST_CW_3)
+ snandc->regs->read_location_last3 = val;
+}
+
+static struct qcom_nand_controller *nand_to_qcom_snand(struct nand_device *nand)
+{
+ struct nand_ecc_engine *eng = nand->ecc.engine;
+
+ return container_of(eng, struct qcom_nand_controller, ecc_eng);
+}
+
+static int qcom_spi_init(struct qcom_nand_controller *snandc)
+{
+ u32 snand_cfg_val = 0x0;
+ int ret;
+
+ snand_cfg_val |= (LOAD_CLK_CNTR_INIT_EN | (CLK_CNTR_INIT_VAL_VEC << 16) |
+ (FEA_STATUS_DEV_ADDR << 8) | SPI_CFG);
+
+ snandc->regs->spi_cfg = snand_cfg_val;
+ snandc->regs->num_addr_cycle = SPI_NUM_ADDR;
+ snandc->regs->busy_wait_cnt = SPI_WAIT_CNT;
+
+ qcom_write_reg_dma(snandc, &snandc->regs->spi_cfg, NAND_FLASH_SPI_CFG, 1, 0);
+
+ snand_cfg_val &= ~LOAD_CLK_CNTR_INIT_EN;
+ snandc->regs->spi_cfg = snand_cfg_val;
+
+ qcom_write_reg_dma(snandc, &snandc->regs->spi_cfg, NAND_FLASH_SPI_CFG, 1, 0);
+
+ qcom_write_reg_dma(snandc, &snandc->regs->num_addr_cycle, NAND_NUM_ADDR_CYCLES, 1, 0);
+ qcom_write_reg_dma(snandc, &snandc->regs->busy_wait_cnt, NAND_BUSY_CHECK_WAIT_CNT, 1,
+ NAND_BAM_NEXT_SGL);
+
+ ret = qcom_submit_descs(snandc);
+ if (ret) {
+ dev_err(snandc->dev, "failure in submitting spi init descriptor\n");
+ return ret;
+ }
+
+ return ret;
+}
+
+static int qcom_spi_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_device *nand = mtd_to_nanddev(mtd);
+ struct qcom_nand_controller *snandc = nand_to_qcom_snand(nand);
+ struct qpic_ecc *qecc = snandc->ecc;
+
+ if (section > 1)
+ return -ERANGE;
+
+ if (!section) {
+ oobregion->length = (qecc->bytes * (qecc->steps - 1)) + qecc->bbm_size;
+ oobregion->offset = 0;
+ } else {
+ oobregion->length = qecc->ecc_bytes_hw + qecc->spare_bytes;
+ oobregion->offset = mtd->oobsize - oobregion->length;
+ }
+
+ return 0;
+}
+
+static int qcom_spi_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_device *nand = mtd_to_nanddev(mtd);
+ struct qcom_nand_controller *snandc = nand_to_qcom_snand(nand);
+ struct qpic_ecc *qecc = snandc->ecc;
+
+ if (section)
+ return -ERANGE;
+
+ oobregion->length = qecc->steps * 4;
+ oobregion->offset = ((qecc->steps - 1) * qecc->bytes) + qecc->bbm_size;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops qcom_spi_ooblayout = {
+ .ecc = qcom_spi_ooblayout_ecc,
+ .free = qcom_spi_ooblayout_free,
+};
+
+static int qcom_spi_ecc_init_ctx_pipelined(struct nand_device *nand)
+{
+ struct qcom_nand_controller *snandc = nand_to_qcom_snand(nand);
+ struct nand_ecc_props *conf = &nand->ecc.ctx.conf;
+ struct nand_ecc_props *reqs = &nand->ecc.requirements;
+ struct nand_ecc_props *user = &nand->ecc.user_conf;
+ struct mtd_info *mtd = nanddev_to_mtd(nand);
+ int step_size = 0, strength = 0, steps;
+ int cwperpage, bad_block_byte;
+ struct qpic_ecc *ecc_cfg;
+
+ cwperpage = mtd->writesize / NANDC_STEP_SIZE;
+ snandc->num_cw = cwperpage;
+
+ ecc_cfg = kzalloc(sizeof(*ecc_cfg), GFP_KERNEL);
+ if (!ecc_cfg)
+ return -ENOMEM;
+
+ nand->ecc.ctx.priv = ecc_cfg;
+
+ if (user->step_size && user->strength) {
+ step_size = user->step_size;
+ strength = user->strength;
+ } else if (reqs->step_size && reqs->strength) {
+ step_size = reqs->step_size;
+ strength = reqs->strength;
+ }
+
+ if (step_size && strength)
+ steps = mtd->writesize / step_size;
+
+ ecc_cfg->ecc_bytes_hw = 7;
+ ecc_cfg->spare_bytes = 4;
+ ecc_cfg->bbm_size = 1;
+ ecc_cfg->bch_enabled = true;
+ ecc_cfg->bytes = ecc_cfg->ecc_bytes_hw + ecc_cfg->spare_bytes + ecc_cfg->bbm_size;
+
+ ecc_cfg->steps = 4;
+ ecc_cfg->strength = 4;
+ ecc_cfg->step_size = 512;
+
+ mtd_set_ooblayout(mtd, &qcom_spi_ooblayout);
+
+ ecc_cfg->cw_data = 516;
+ ecc_cfg->cw_size = ecc_cfg->cw_data + ecc_cfg->bytes;
+ bad_block_byte = mtd->writesize - ecc_cfg->cw_size * (cwperpage - 1) + 1;
+
+ ecc_cfg->cfg0 = (cwperpage - 1) << CW_PER_PAGE
+ | ecc_cfg->cw_data << UD_SIZE_BYTES
+ | 1 << DISABLE_STATUS_AFTER_WRITE
+ | 3 << NUM_ADDR_CYCLES
+ | ecc_cfg->ecc_bytes_hw << ECC_PARITY_SIZE_BYTES_RS
+ | 0 << STATUS_BFR_READ
+ | 1 << SET_RD_MODE_AFTER_STATUS
+ | ecc_cfg->spare_bytes << SPARE_SIZE_BYTES;
+
+ ecc_cfg->cfg1 = 0 << NAND_RECOVERY_CYCLES
+ | 0 << CS_ACTIVE_BSY
+ | bad_block_byte << BAD_BLOCK_BYTE_NUM
+ | 0 << BAD_BLOCK_IN_SPARE_AREA
+ | 20 << WR_RD_BSY_GAP
+ | 0 << WIDE_FLASH
+ | ecc_cfg->bch_enabled << ENABLE_BCH_ECC;
+
+ ecc_cfg->cfg0_raw = (cwperpage - 1) << CW_PER_PAGE
+ | ecc_cfg->cw_size << UD_SIZE_BYTES
+ | 3 << NUM_ADDR_CYCLES
+ | 0 << SPARE_SIZE_BYTES;
+
+ ecc_cfg->cfg1_raw = 0 << NAND_RECOVERY_CYCLES
+ | 0 << CS_ACTIVE_BSY
+ | 17 << BAD_BLOCK_BYTE_NUM
+ | 1 << BAD_BLOCK_IN_SPARE_AREA
+ | 20 << WR_RD_BSY_GAP
+ | 0 << WIDE_FLASH
+ | 1 << DEV0_CFG1_ECC_DISABLE;
+
+ ecc_cfg->ecc_bch_cfg = !ecc_cfg->bch_enabled << ECC_CFG_ECC_DISABLE
+ | 0 << ECC_SW_RESET
+ | ecc_cfg->cw_data << ECC_NUM_DATA_BYTES
+ | 1 << ECC_FORCE_CLK_OPEN
+ | 0 << ECC_MODE
+ | ecc_cfg->ecc_bytes_hw << ECC_PARITY_SIZE_BYTES_BCH;
+
+ ecc_cfg->ecc_buf_cfg = 0x203 << NUM_STEPS;
+ ecc_cfg->clrflashstatus = FS_READY_BSY_N;
+ ecc_cfg->clrreadstatus = 0xc0;
+
+ conf->step_size = ecc_cfg->step_size;
+ conf->strength = ecc_cfg->strength;
+
+ snandc->regs->erased_cw_detect_cfg_clr = cpu_to_le32(CLR_ERASED_PAGE_DET);
+ snandc->regs->erased_cw_detect_cfg_set = cpu_to_le32(SET_ERASED_PAGE_DET);
+
+ dev_dbg(snandc->dev, "ECC strength: %u bits per %u bytes\n",
+ ecc_cfg->strength, ecc_cfg->step_size);
+
+ return 0;
+}
+
+static void qcom_spi_ecc_cleanup_ctx_pipelined(struct nand_device *nand)
+{
+ struct qpic_ecc *ecc_cfg = nand_to_ecc_ctx(nand);
+
+ kfree(ecc_cfg);
+}
+
+static int qcom_spi_ecc_prepare_io_req_pipelined(struct nand_device *nand,
+ struct nand_page_io_req *req)
+{
+ struct qcom_nand_controller *snandc = nand_to_qcom_snand(nand);
+ struct qpic_ecc *ecc_cfg = nand_to_ecc_ctx(nand);
+ struct mtd_info *mtd = nanddev_to_mtd(nand);
+
+ snandc->pagesize = mtd->writesize;
+ snandc->ecc = ecc_cfg;
+ snandc->raw_rw = false;
+ snandc->oob_rw = false;
+ snandc->page_rw = false;
+
+ if (req->datalen)
+ snandc->page_rw = true;
+
+ if (req->ooblen) {
+ snandc->oob_rw = true;
+ if (req->ooblen == BAD_BLOCK_MARKER_SIZE)
+ snandc->read_last_cw = true;
+ }
+
+ if (req->mode == MTD_OPS_RAW)
+ snandc->raw_rw = true;
+
+ return 0;
+}
+
+static int qcom_spi_ecc_finish_io_req_pipelined(struct nand_device *nand,
+ struct nand_page_io_req *req)
+{
+ struct qcom_nand_controller *snandc = nand_to_qcom_snand(nand);
+ struct mtd_info *mtd = nanddev_to_mtd(nand);
+
+ if (req->mode == MTD_OPS_RAW || req->type != NAND_PAGE_READ)
+ return 0;
+
+ if (snandc->ecc_stats.failed)
+ mtd->ecc_stats.failed += snandc->ecc_stats.failed;
+ mtd->ecc_stats.corrected += snandc->ecc_stats.corrected;
+
+ if (snandc->ecc_stats.failed)
+ return -EBADMSG;
+ else
+ return snandc->ecc_stats.bitflips;
+}
+
+static struct nand_ecc_engine_ops qcom_spi_ecc_engine_ops_pipelined = {
+ .init_ctx = qcom_spi_ecc_init_ctx_pipelined,
+ .cleanup_ctx = qcom_spi_ecc_cleanup_ctx_pipelined,
+ .prepare_io_req = qcom_spi_ecc_prepare_io_req_pipelined,
+ .finish_io_req = qcom_spi_ecc_finish_io_req_pipelined,
+};
+
+/* helper to configure location register values */
+static void qcom_spi_set_read_loc(struct qcom_nand_controller *snandc, int cw, int reg,
+ int cw_offset, int read_size, int is_last_read_loc)
+{
+ int reg_base = NAND_READ_LOCATION_0;
+ int num_cw = snandc->num_cw;
+
+ if (cw == (num_cw - 1))
+ reg_base = NAND_READ_LOCATION_LAST_CW_0;
+
+ reg_base += reg * 4;
+
+ if (cw == (num_cw - 1))
+ return qcom_spi_set_read_loc_last(snandc, reg_base, cw_offset,
+ read_size, is_last_read_loc);
+ else
+ return qcom_spi_set_read_loc_first(snandc, reg_base, cw_offset,
+ read_size, is_last_read_loc);
+}
+
+static void
+qcom_spi_config_cw_read(struct qcom_nand_controller *snandc, bool use_ecc, int cw)
+{
+ __le32 *reg = &snandc->regs->read_location0;
+ int num_cw = snandc->num_cw;
+
+ qcom_write_reg_dma(snandc, reg, NAND_READ_LOCATION_0, 4, NAND_BAM_NEXT_SGL);
+ if (cw == (num_cw - 1)) {
+ reg = &snandc->regs->read_location_last0;
+ qcom_write_reg_dma(snandc, reg, NAND_READ_LOCATION_LAST_CW_0, 4,
+ NAND_BAM_NEXT_SGL);
+ }
+
+ qcom_write_reg_dma(snandc, &snandc->regs->cmd, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL);
+ qcom_write_reg_dma(snandc, &snandc->regs->exec, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
+
+ qcom_read_reg_dma(snandc, NAND_FLASH_STATUS, 2, 0);
+ qcom_read_reg_dma(snandc, NAND_ERASED_CW_DETECT_STATUS, 1,
+ NAND_BAM_NEXT_SGL);
+}
+
+static int qcom_spi_block_erase(struct qcom_nand_controller *snandc)
+{
+ struct qpic_ecc *ecc_cfg = snandc->ecc;
+ int ret;
+
+ snandc->buf_count = 0;
+ snandc->buf_start = 0;
+ qcom_clear_read_regs(snandc);
+ qcom_clear_bam_transaction(snandc);
+
+ snandc->regs->cmd = snandc->cmd;
+ snandc->regs->addr0 = snandc->addr1;
+ snandc->regs->addr1 = snandc->addr2;
+ snandc->regs->cfg0 = ecc_cfg->cfg0_raw & ~(7 << CW_PER_PAGE);
+ snandc->regs->cfg1 = ecc_cfg->cfg1_raw;
+ snandc->regs->exec = 1;
+
+ qcom_write_reg_dma(snandc, &snandc->regs->cmd, NAND_FLASH_CMD, 3, NAND_BAM_NEXT_SGL);
+ qcom_write_reg_dma(snandc, &snandc->regs->cfg0, NAND_DEV0_CFG0, 2, NAND_BAM_NEXT_SGL);
+ qcom_write_reg_dma(snandc, &snandc->regs->exec, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
+
+ ret = qcom_submit_descs(snandc);
+ if (ret) {
+ dev_err(snandc->dev, "failure to erase block\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static void qcom_spi_config_single_cw_page_read(struct qcom_nand_controller *snandc,
+ bool use_ecc, int cw)
+{
+ __le32 *reg = &snandc->regs->read_location0;
+ int num_cw = snandc->num_cw;
+
+ qcom_write_reg_dma(snandc, &snandc->regs->addr0, NAND_ADDR0, 2, 0);
+ qcom_write_reg_dma(snandc, &snandc->regs->cfg0, NAND_DEV0_CFG0, 3, 0);
+ qcom_write_reg_dma(snandc, &snandc->regs->erased_cw_detect_cfg_clr,
+ NAND_ERASED_CW_DETECT_CFG, 1, 0);
+ qcom_write_reg_dma(snandc, &snandc->regs->erased_cw_detect_cfg_set,
+ NAND_ERASED_CW_DETECT_CFG, 1,
+ NAND_ERASED_CW_SET | NAND_BAM_NEXT_SGL);
+
+ if (cw == (num_cw - 1)) {
+ reg = &snandc->regs->read_location_last0;
+ qcom_write_reg_dma(snandc, reg, NAND_READ_LOCATION_LAST_CW_0, 4, NAND_BAM_NEXT_SGL);
+ }
+ qcom_write_reg_dma(snandc, &snandc->regs->cmd, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL);
+ qcom_write_reg_dma(snandc, &snandc->regs->exec, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
+
+ qcom_read_reg_dma(snandc, NAND_FLASH_STATUS, 1, 0);
+}
+
+static int qcom_spi_read_last_cw(struct qcom_nand_controller *snandc,
+ const struct spi_mem_op *op)
+{
+ struct qpic_ecc *ecc_cfg = snandc->ecc;
+ int size, ret = 0;
+ int col, bbpos;
+ u32 cfg0, cfg1, ecc_bch_cfg;
+ u32 num_cw = snandc->num_cw;
+
+ qcom_clear_bam_transaction(snandc);
+ qcom_clear_read_regs(snandc);
+
+ size = ecc_cfg->cw_size;
+ col = ecc_cfg->cw_size * (num_cw - 1);
+
+ memset(snandc->data_buffer, 0xff, size);
+ snandc->regs->addr0 = (snandc->addr1 | col);
+ snandc->regs->addr1 = snandc->addr2;
+
+ cfg0 = (ecc_cfg->cfg0_raw & ~(7U << CW_PER_PAGE)) |
+ 0 << CW_PER_PAGE;
+ cfg1 = ecc_cfg->cfg1_raw;
+ ecc_bch_cfg = 1 << ECC_CFG_ECC_DISABLE;
+
+ snandc->regs->cmd = snandc->cmd;
+ snandc->regs->cfg0 = cfg0;
+ snandc->regs->cfg1 = cfg1;
+ snandc->regs->ecc_bch_cfg = ecc_bch_cfg;
+ snandc->regs->clrflashstatus = ecc_cfg->clrflashstatus;
+ snandc->regs->clrreadstatus = ecc_cfg->clrreadstatus;
+ snandc->regs->exec = 1;
+
+ qcom_spi_set_read_loc(snandc, num_cw - 1, 0, 0, ecc_cfg->cw_size, 1);
+
+ qcom_spi_config_single_cw_page_read(snandc, false, num_cw - 1);
+
+ qcom_read_data_dma(snandc, FLASH_BUF_ACC, snandc->data_buffer, size, 0);
+
+ ret = qcom_submit_descs(snandc);
+ if (ret) {
+ dev_err(snandc->dev, "failed to read last cw\n");
+ return ret;
+ }
+
+ qcom_nandc_dev_to_mem(snandc, true);
+ u32 flash = le32_to_cpu(snandc->reg_read_buf[0]);
+
+ if (flash & (FS_OP_ERR | FS_MPU_ERR))
+ return -EIO;
+
+ bbpos = snandc->pagesize - ecc_cfg->cw_size * (num_cw - 1);
+
+ if (snandc->data_buffer[bbpos] == 0xff)
+ snandc->data_buffer[bbpos + 1] = 0xff;
+ if (snandc->data_buffer[bbpos] != 0xff)
+ snandc->data_buffer[bbpos + 1] = snandc->data_buffer[bbpos];
+
+ memcpy(op->data.buf.in, snandc->data_buffer + bbpos, op->data.nbytes);
+
+ return ret;
+}
+
+static int qcom_spi_check_error(struct qcom_nand_controller *snandc, u8 *data_buf, u8 *oob_buf)
+{
+ struct snandc_read_status *buf;
+ struct qpic_ecc *ecc_cfg = snandc->ecc;
+ int i, num_cw = snandc->num_cw;
+ bool flash_op_err = false, erased;
+ unsigned int max_bitflips = 0;
+ unsigned int uncorrectable_cws = 0;
+
+ snandc->ecc_stats.failed = 0;
+ snandc->ecc_stats.corrected = 0;
+
+ qcom_nandc_dev_to_mem(snandc, true);
+ buf = (struct snandc_read_status *)snandc->reg_read_buf;
+
+ for (i = 0; i < num_cw; i++, buf++) {
+ u32 flash, buffer, erased_cw;
+ int data_len, oob_len;
+
+ if (i == (num_cw - 1)) {
+ data_len = NANDC_STEP_SIZE - ((num_cw - 1) << 2);
+ oob_len = num_cw << 2;
+ } else {
+ data_len = ecc_cfg->cw_data;
+ oob_len = 0;
+ }
+
+ flash = le32_to_cpu(buf->snandc_flash);
+ buffer = le32_to_cpu(buf->snandc_buffer);
+ erased_cw = le32_to_cpu(buf->snandc_erased_cw);
+
+ if ((flash & FS_OP_ERR) && (buffer & BS_UNCORRECTABLE_BIT)) {
+ if (ecc_cfg->bch_enabled)
+ erased = (erased_cw & ERASED_CW) == ERASED_CW;
+ else
+ erased = false;
+
+ if (!erased)
+ uncorrectable_cws |= BIT(i);
+
+ } else if (flash & (FS_OP_ERR | FS_MPU_ERR)) {
+ flash_op_err = true;
+ } else {
+ unsigned int stat;
+
+ stat = buffer & BS_CORRECTABLE_ERR_MSK;
+ snandc->ecc_stats.corrected += stat;
+ max_bitflips = max(max_bitflips, stat);
+ }
+
+ if (data_buf)
+ data_buf += data_len;
+ if (oob_buf)
+ oob_buf += oob_len + ecc_cfg->bytes;
+ }
+
+ if (flash_op_err)
+ return -EIO;
+
+ if (!uncorrectable_cws)
+ snandc->ecc_stats.bitflips = max_bitflips;
+ else
+ snandc->ecc_stats.failed++;
+
+ return 0;
+}
+
+static int qcom_spi_check_raw_flash_errors(struct qcom_nand_controller *snandc, int cw_cnt)
+{
+ int i;
+
+ qcom_nandc_dev_to_mem(snandc, true);
+
+ for (i = 0; i < cw_cnt; i++) {
+ u32 flash = le32_to_cpu(snandc->reg_read_buf[i]);
+
+ if (flash & (FS_OP_ERR | FS_MPU_ERR))
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int qcom_spi_read_cw_raw(struct qcom_nand_controller *snandc, u8 *data_buf,
+ u8 *oob_buf, int cw)
+{
+ int data_size1, data_size2, oob_size1, oob_size2;
+ int ret, reg_off = FLASH_BUF_ACC, read_loc = 0;
+ int raw_cw = cw;
+ struct qpic_ecc *ecc_cfg = snandc->ecc;
+ u32 cfg0, cfg1, ecc_bch_cfg, num_cw = snandc->num_cw;
+ int col;
+
+ snandc->buf_count = 0;
+ snandc->buf_start = 0;
+ qcom_clear_read_regs(snandc);
+ qcom_clear_bam_transaction(snandc);
+ raw_cw = num_cw - 1;
+
+ cfg0 = (ecc_cfg->cfg0_raw & ~(7U << CW_PER_PAGE)) |
+ 0 << CW_PER_PAGE;
+ cfg1 = ecc_cfg->cfg1_raw;
+ ecc_bch_cfg = 1 << ECC_CFG_ECC_DISABLE;
+
+ col = ecc_cfg->cw_size * cw;
+
+ snandc->regs->addr0 = snandc->addr1 | col;
+ snandc->regs->addr1 = snandc->addr2;
+ snandc->regs->cmd = snandc->cmd;
+ snandc->regs->cfg0 = cfg0;
+ snandc->regs->cfg1 = cfg1;
+ snandc->regs->ecc_bch_cfg = ecc_bch_cfg;
+ snandc->regs->clrflashstatus = ecc_cfg->clrflashstatus;
+ snandc->regs->clrreadstatus = ecc_cfg->clrreadstatus;
+ snandc->regs->exec = 1;
+
+ qcom_spi_set_read_loc(snandc, raw_cw, 0, 0, ecc_cfg->cw_size, 1);
+
+ qcom_write_reg_dma(snandc, &snandc->regs->addr0, NAND_ADDR0, 2, 0);
+ qcom_write_reg_dma(snandc, &snandc->regs->cfg0, NAND_DEV0_CFG0, 3, 0);
+ qcom_write_reg_dma(snandc, &snandc->regs->ecc_buf_cfg, NAND_EBI2_ECC_BUF_CFG, 1, 0);
+
+ qcom_write_reg_dma(snandc, &snandc->regs->erased_cw_detect_cfg_clr,
+ NAND_ERASED_CW_DETECT_CFG, 1, 0);
+ qcom_write_reg_dma(snandc, &snandc->regs->erased_cw_detect_cfg_set,
+ NAND_ERASED_CW_DETECT_CFG, 1,
+ NAND_ERASED_CW_SET | NAND_BAM_NEXT_SGL);
+
+ data_size1 = snandc->pagesize - ecc_cfg->cw_size * (num_cw - 1);
+ oob_size1 = ecc_cfg->bbm_size;
+
+ if (cw == (num_cw - 1)) {
+ data_size2 = NANDC_STEP_SIZE - data_size1 -
+ ((num_cw - 1) * 4);
+ oob_size2 = (num_cw * 4) + ecc_cfg->ecc_bytes_hw +
+ ecc_cfg->spare_bytes;
+ } else {
+ data_size2 = ecc_cfg->cw_data - data_size1;
+ oob_size2 = ecc_cfg->ecc_bytes_hw + ecc_cfg->spare_bytes;
+ }
+
+ qcom_spi_set_read_loc(snandc, cw, 0, read_loc, data_size1, 0);
+ read_loc += data_size1;
+
+ qcom_spi_set_read_loc(snandc, cw, 1, read_loc, oob_size1, 0);
+ read_loc += oob_size1;
+
+ qcom_spi_set_read_loc(snandc, cw, 2, read_loc, data_size2, 0);
+ read_loc += data_size2;
+
+ qcom_spi_set_read_loc(snandc, cw, 3, read_loc, oob_size2, 1);
+
+ qcom_spi_config_cw_read(snandc, false, raw_cw);
+
+ qcom_read_data_dma(snandc, reg_off, data_buf, data_size1, 0);
+ reg_off += data_size1;
+
+ qcom_read_data_dma(snandc, reg_off, oob_buf, oob_size1, 0);
+ reg_off += oob_size1;
+
+ qcom_read_data_dma(snandc, reg_off, data_buf + data_size1, data_size2, 0);
+ reg_off += data_size2;
+
+ qcom_read_data_dma(snandc, reg_off, oob_buf + oob_size1, oob_size2, 0);
+
+ ret = qcom_submit_descs(snandc);
+ if (ret) {
+ dev_err(snandc->dev, "failure to read raw cw %d\n", cw);
+ return ret;
+ }
+
+ return qcom_spi_check_raw_flash_errors(snandc, 1);
+}
+
+static int qcom_spi_read_page_raw(struct qcom_nand_controller *snandc,
+ const struct spi_mem_op *op)
+{
+ struct qpic_ecc *ecc_cfg = snandc->ecc;
+ u8 *data_buf = NULL, *oob_buf = NULL;
+ int ret, cw;
+ u32 num_cw = snandc->num_cw;
+
+ if (snandc->page_rw)
+ data_buf = op->data.buf.in;
+
+ if (snandc->oob_rw)
+ oob_buf = op->data.buf.in;
+
+ if (!oob_buf) {
+ oob_buf = snandc->oob_buf;
+ memset(oob_buf, 0xff, OOB_BUF_SIZE);
+ }
+
+ for (cw = 0; cw < num_cw; cw++) {
+ ret = qcom_spi_read_cw_raw(snandc, data_buf, oob_buf, cw);
+ if (ret)
+ return ret;
+
+ if (data_buf)
+ data_buf += ecc_cfg->cw_data;
+ if (oob_buf)
+ oob_buf += ecc_cfg->bytes;
+ }
+
+ return 0;
+}
+
+static int qcom_spi_read_page_cache(struct qcom_nand_controller *snandc,
+ const struct spi_mem_op *op)
+{
+ struct qpic_ecc *ecc_cfg = snandc->ecc;
+ u8 *data_buf = NULL, *data_buf_start, *oob_buf = NULL, *oob_buf_start;
+ int ret, i;
+ u32 cfg0, cfg1, ecc_bch_cfg, num_cw = snandc->num_cw;
+
+ if (snandc->page_rw) {
+ data_buf = op->data.buf.in;
+ data_buf_start = data_buf;
+ }
+
+ if (snandc->oob_rw || snandc->raw_rw) {
+ oob_buf = op->data.buf.in;
+ oob_buf_start = oob_buf;
+ }
+
+ if (snandc->page_rw && snandc->raw_rw)
+ return qcom_spi_read_page_raw(snandc, op);
+
+ if (snandc->oob_rw && snandc->raw_rw && snandc->read_last_cw)
+ return qcom_spi_read_last_cw(snandc, op);
+
+ snandc->buf_count = 0;
+ snandc->buf_start = 0;
+ qcom_clear_read_regs(snandc);
+
+ cfg0 = (ecc_cfg->cfg0 & ~(7U << CW_PER_PAGE)) |
+ (num_cw - 1) << CW_PER_PAGE;
+ cfg1 = ecc_cfg->cfg1;
+ ecc_bch_cfg = ecc_cfg->ecc_bch_cfg;
+
+ snandc->regs->addr0 = snandc->addr1;
+ snandc->regs->addr1 = snandc->addr2;
+ snandc->regs->cmd = snandc->cmd;
+ snandc->regs->cfg0 = cfg0;
+ snandc->regs->cfg1 = cfg1;
+ snandc->regs->ecc_bch_cfg = ecc_bch_cfg;
+ snandc->regs->clrflashstatus = ecc_cfg->clrflashstatus;
+ snandc->regs->clrreadstatus = ecc_cfg->clrreadstatus;
+ snandc->regs->exec = 1;
+
+ qcom_spi_set_read_loc(snandc, 0, 0, 0, ecc_cfg->cw_data, 1);
+
+ qcom_clear_bam_transaction(snandc);
+
+ qcom_write_reg_dma(snandc, &snandc->regs->addr0, NAND_ADDR0, 2, 0);
+ qcom_write_reg_dma(snandc, &snandc->regs->cfg0, NAND_DEV0_CFG0, 3, 0);
+ qcom_write_reg_dma(snandc, &snandc->regs->erased_cw_detect_cfg_clr,
+ NAND_ERASED_CW_DETECT_CFG, 1, 0);
+ qcom_write_reg_dma(snandc, &snandc->regs->erased_cw_detect_cfg_set,
+ NAND_ERASED_CW_DETECT_CFG, 1,
+ NAND_ERASED_CW_SET | NAND_BAM_NEXT_SGL);
+
+ for (i = 0; i < num_cw; i++) {
+ int data_size, oob_size;
+
+ if (i == (num_cw - 1)) {
+ data_size = 512 - ((num_cw - 1) << 2);
+ oob_size = (num_cw << 2) + ecc_cfg->ecc_bytes_hw +
+ ecc_cfg->spare_bytes;
+ } else {
+ data_size = ecc_cfg->cw_data;
+ oob_size = ecc_cfg->ecc_bytes_hw + ecc_cfg->spare_bytes;
+ }
+
+ if (data_buf && oob_buf) {
+ qcom_spi_set_read_loc(snandc, i, 0, 0, data_size, 0);
+ qcom_spi_set_read_loc(snandc, i, 1, data_size, oob_size, 1);
+ } else if (data_buf) {
+ qcom_spi_set_read_loc(snandc, i, 0, 0, data_size, 1);
+ } else {
+ qcom_spi_set_read_loc(snandc, i, 0, data_size, oob_size, 1);
+ }
+
+ qcom_spi_config_cw_read(snandc, true, i);
+
+ if (data_buf)
+ qcom_read_data_dma(snandc, FLASH_BUF_ACC, data_buf,
+ data_size, 0);
+ if (oob_buf) {
+ int j;
+
+ for (j = 0; j < ecc_cfg->bbm_size; j++)
+ *oob_buf++ = 0xff;
+
+ qcom_read_data_dma(snandc, FLASH_BUF_ACC + data_size,
+ oob_buf, oob_size, 0);
+ }
+
+ if (data_buf)
+ data_buf += data_size;
+ if (oob_buf)
+ oob_buf += oob_size;
+ }
+
+ ret = qcom_submit_descs(snandc);
+ if (ret) {
+ dev_err(snandc->dev, "failure to read page\n");
+ return ret;
+ }
+
+ return qcom_spi_check_error(snandc, data_buf_start, oob_buf_start);
+}
+
+static void qcom_spi_config_page_write(struct qcom_nand_controller *snandc)
+{
+ qcom_write_reg_dma(snandc, &snandc->regs->addr0, NAND_ADDR0, 2, 0);
+ qcom_write_reg_dma(snandc, &snandc->regs->cfg0, NAND_DEV0_CFG0, 3, 0);
+ qcom_write_reg_dma(snandc, &snandc->regs->ecc_buf_cfg, NAND_EBI2_ECC_BUF_CFG,
+ 1, NAND_BAM_NEXT_SGL);
+}
+
+static void qcom_spi_config_cw_write(struct qcom_nand_controller *snandc)
+{
+ qcom_write_reg_dma(snandc, &snandc->regs->cmd, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL);
+ qcom_write_reg_dma(snandc, &snandc->regs->exec, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
+ qcom_read_reg_dma(snandc, NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL);
+
+ qcom_write_reg_dma(snandc, &snandc->regs->clrflashstatus, NAND_FLASH_STATUS, 1, 0);
+ qcom_write_reg_dma(snandc, &snandc->regs->clrreadstatus, NAND_READ_STATUS, 1,
+ NAND_BAM_NEXT_SGL);
+}
+
+static int qcom_spi_program_raw(struct qcom_nand_controller *snandc,
+ const struct spi_mem_op *op)
+{
+ struct qpic_ecc *ecc_cfg = snandc->ecc;
+ u8 *data_buf = NULL, *oob_buf = NULL;
+ int i, ret;
+ int num_cw = snandc->num_cw;
+ u32 cfg0, cfg1, ecc_bch_cfg;
+
+ cfg0 = (ecc_cfg->cfg0_raw & ~(7U << CW_PER_PAGE)) |
+ (num_cw - 1) << CW_PER_PAGE;
+ cfg1 = ecc_cfg->cfg1_raw;
+ ecc_bch_cfg = 1 << ECC_CFG_ECC_DISABLE;
+
+ data_buf = snandc->data_buf;
+
+ oob_buf = snandc->oob_buf;
+ memset(oob_buf, 0xff, OOB_BUF_SIZE);
+
+ snandc->buf_count = 0;
+ snandc->buf_start = 0;
+ qcom_clear_read_regs(snandc);
+ qcom_clear_bam_transaction(snandc);
+
+ snandc->regs->addr0 = snandc->addr1;
+ snandc->regs->addr1 = snandc->addr2;
+ snandc->regs->cmd = snandc->cmd;
+ snandc->regs->cfg0 = cfg0;
+ snandc->regs->cfg1 = cfg1;
+ snandc->regs->ecc_bch_cfg = ecc_bch_cfg;
+ snandc->regs->clrflashstatus = ecc_cfg->clrflashstatus;
+ snandc->regs->clrreadstatus = ecc_cfg->clrreadstatus;
+ snandc->regs->exec = 1;
+
+ qcom_spi_config_page_write(snandc);
+
+ for (i = 0; i < num_cw; i++) {
+ int data_size1, data_size2, oob_size1, oob_size2;
+ int reg_off = FLASH_BUF_ACC;
+
+ data_size1 = snandc->pagesize - ecc_cfg->cw_size * (num_cw - 1);
+ oob_size1 = ecc_cfg->bbm_size;
+
+ if ((i == (num_cw - 1))) {
+ data_size2 = NANDC_STEP_SIZE - data_size1 -
+ ((num_cw - 1) << 2);
+ oob_size2 = (num_cw << 2) + ecc_cfg->ecc_bytes_hw +
+ ecc_cfg->spare_bytes;
+ } else {
+ data_size2 = ecc_cfg->cw_data - data_size1;
+ oob_size2 = ecc_cfg->ecc_bytes_hw + ecc_cfg->spare_bytes;
+ }
+
+ qcom_write_data_dma(snandc, reg_off, data_buf, data_size1,
+ NAND_BAM_NO_EOT);
+ reg_off += data_size1;
+ data_buf += data_size1;
+
+ qcom_write_data_dma(snandc, reg_off, oob_buf, oob_size1,
+ NAND_BAM_NO_EOT);
+ oob_buf += oob_size1;
+ reg_off += oob_size1;
+
+ qcom_write_data_dma(snandc, reg_off, data_buf, data_size2,
+ NAND_BAM_NO_EOT);
+ reg_off += data_size2;
+ data_buf += data_size2;
+
+ qcom_write_data_dma(snandc, reg_off, oob_buf, oob_size2, 0);
+ oob_buf += oob_size2;
+
+ qcom_spi_config_cw_write(snandc);
+ }
+
+ ret = qcom_submit_descs(snandc);
+ if (ret) {
+ dev_err(snandc->dev, "failure to write raw page\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int qcom_spi_program_execute(struct qcom_nand_controller *snandc,
+ const struct spi_mem_op *op)
+{
+ struct qpic_ecc *ecc_cfg = snandc->ecc;
+ u8 *data_buf = NULL, *oob_buf = NULL;
+ int i, ret;
+ int num_cw = snandc->num_cw;
+ u32 cfg0, cfg1, ecc_bch_cfg, ecc_buf_cfg;
+
+ cfg0 = (ecc_cfg->cfg0 & ~(7U << CW_PER_PAGE)) |
+ (num_cw - 1) << CW_PER_PAGE;
+ cfg1 = ecc_cfg->cfg1;
+ ecc_bch_cfg = ecc_cfg->ecc_bch_cfg;
+ ecc_buf_cfg = ecc_cfg->ecc_buf_cfg;
+
+ if (snandc->page_rw && snandc->raw_rw)
+ return qcom_spi_program_raw(snandc, op);
+
+ if (snandc->data_buf)
+ data_buf = snandc->data_buf;
+
+ if (snandc->oob_buf)
+ oob_buf = snandc->oob_buf;
+
+ snandc->buf_count = 0;
+ snandc->buf_start = 0;
+ qcom_clear_read_regs(snandc);
+ qcom_clear_bam_transaction(snandc);
+
+ snandc->regs->addr0 = snandc->addr1;
+ snandc->regs->addr1 = snandc->addr2;
+ snandc->regs->cmd = snandc->cmd;
+ snandc->regs->cfg0 = cfg0;
+ snandc->regs->cfg1 = cfg1;
+ snandc->regs->ecc_bch_cfg = ecc_bch_cfg;
+ snandc->regs->ecc_buf_cfg = ecc_buf_cfg;
+ snandc->regs->exec = 1;
+
+ qcom_spi_config_page_write(snandc);
+
+ for (i = 0; i < num_cw; i++) {
+ int data_size, oob_size;
+
+ if (i == (num_cw - 1)) {
+ data_size = NANDC_STEP_SIZE - ((num_cw - 1) << 2);
+ oob_size = (num_cw << 2) + ecc_cfg->ecc_bytes_hw +
+ ecc_cfg->spare_bytes;
+ } else {
+ data_size = ecc_cfg->cw_data;
+ oob_size = ecc_cfg->bytes;
+ }
+
+ if (data_buf)
+ qcom_write_data_dma(snandc, FLASH_BUF_ACC, data_buf, data_size,
+ i == (num_cw - 1) ? NAND_BAM_NO_EOT : 0);
+
+ if (i == (num_cw - 1)) {
+ if (oob_buf) {
+ oob_buf += ecc_cfg->bbm_size;
+ qcom_write_data_dma(snandc, FLASH_BUF_ACC + data_size,
+ oob_buf, oob_size, 0);
+ }
+ }
+
+ qcom_spi_config_cw_write(snandc);
+
+ if (data_buf)
+ data_buf += data_size;
+ if (oob_buf)
+ oob_buf += oob_size;
+ }
+
+ ret = qcom_submit_descs(snandc);
+ if (ret) {
+ dev_err(snandc->dev, "failure to write page\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static u32 qcom_spi_cmd_mapping(struct qcom_nand_controller *snandc, u32 opcode)
+{
+ u32 cmd = 0x0;
+
+ switch (opcode) {
+ case SPINAND_RESET:
+ cmd = (SPI_WP | SPI_HOLD | SPI_TRANSFER_MODE_x1 | OP_RESET_DEVICE);
+ break;
+ case SPINAND_READID:
+ cmd = (SPI_WP | SPI_HOLD | SPI_TRANSFER_MODE_x1 | OP_FETCH_ID);
+ break;
+ case SPINAND_GET_FEATURE:
+ cmd = (SPI_TRANSFER_MODE_x1 | SPI_WP | SPI_HOLD | ACC_FEATURE);
+ break;
+ case SPINAND_SET_FEATURE:
+ cmd = (SPI_TRANSFER_MODE_x1 | SPI_WP | SPI_HOLD | ACC_FEATURE |
+ QPIC_SET_FEATURE);
+ break;
+ case SPINAND_READ:
+ if (snandc->raw_rw) {
+ cmd = (PAGE_ACC | LAST_PAGE | SPI_TRANSFER_MODE_x1 |
+ SPI_WP | SPI_HOLD | OP_PAGE_READ);
+ } else {
+ cmd = (PAGE_ACC | LAST_PAGE | SPI_TRANSFER_MODE_x1 |
+ SPI_WP | SPI_HOLD | OP_PAGE_READ_WITH_ECC);
+ }
+
+ break;
+ case SPINAND_ERASE:
+ cmd = OP_BLOCK_ERASE | PAGE_ACC | LAST_PAGE | SPI_WP |
+ SPI_HOLD | SPI_TRANSFER_MODE_x1;
+ break;
+ case SPINAND_WRITE_EN:
+ cmd = SPINAND_WRITE_EN;
+ break;
+ case SPINAND_PROGRAM_EXECUTE:
+ cmd = (PAGE_ACC | LAST_PAGE | SPI_TRANSFER_MODE_x1 |
+ SPI_WP | SPI_HOLD | OP_PROGRAM_PAGE);
+ break;
+ case SPINAND_PROGRAM_LOAD:
+ cmd = SPINAND_PROGRAM_LOAD;
+ break;
+ default:
+ dev_err(snandc->dev, "Opcode not supported: %u\n", opcode);
+ return -EOPNOTSUPP;
+ }
+
+ return cmd;
+}
+
+static int qcom_spi_write_page_cache(struct qcom_nand_controller *snandc,
+ const struct spi_mem_op *op)
+{
+ struct qpic_snand_op s_op = {};
+ u32 cmd;
+
+ cmd = qcom_spi_cmd_mapping(snandc, op->cmd.opcode);
+ s_op.cmd_reg = cmd;
+
+ if (op->cmd.opcode == SPINAND_PROGRAM_LOAD) {
+ if (snandc->page_rw)
+ snandc->data_buf = (u8 *)op->data.buf.out;
+ if (snandc->oob_rw)
+ snandc->oob_buf = (u8 *)op->data.buf.out;
+ }
+
+ return 0;
+}
+
+static int qcom_spi_send_cmdaddr(struct qcom_nand_controller *snandc,
+ const struct spi_mem_op *op)
+{
+ struct qpic_snand_op s_op = {};
+ u32 cmd;
+ int ret, opcode;
+
+ cmd = qcom_spi_cmd_mapping(snandc, op->cmd.opcode);
+
+ s_op.cmd_reg = cmd;
+ s_op.addr1_reg = op->addr.val;
+ s_op.addr2_reg = 0;
+
+ opcode = op->cmd.opcode;
+
+ switch (opcode) {
+ case SPINAND_WRITE_EN:
+ return 0;
+ case SPINAND_PROGRAM_EXECUTE:
+ s_op.addr1_reg = op->addr.val << 16;
+ s_op.addr2_reg = op->addr.val >> 16 & 0xff;
+ snandc->addr1 = s_op.addr1_reg;
+ snandc->addr2 = s_op.addr2_reg;
+ snandc->cmd = cmd;
+ return qcom_spi_program_execute(snandc, op);
+ case SPINAND_READ:
+ s_op.addr1_reg = (op->addr.val << 16);
+ s_op.addr2_reg = op->addr.val >> 16 & 0xff;
+ snandc->addr1 = s_op.addr1_reg;
+ snandc->addr2 = s_op.addr2_reg;
+ snandc->cmd = cmd;
+ return 0;
+ case SPINAND_ERASE:
+ s_op.addr2_reg = (op->addr.val >> 16) & 0xffff;
+ s_op.addr1_reg = op->addr.val;
+ snandc->addr1 = s_op.addr1_reg;
+ snandc->addr1 <<= 16;
+ snandc->addr2 = s_op.addr2_reg;
+ snandc->cmd = cmd;
+ qcom_spi_block_erase(snandc);
+ return 0;
+ default:
+ break;
+ }
+
+ snandc->buf_count = 0;
+ snandc->buf_start = 0;
+ qcom_clear_read_regs(snandc);
+ qcom_clear_bam_transaction(snandc);
+
+ snandc->regs->cmd = s_op.cmd_reg;
+ snandc->regs->exec = 1;
+ snandc->regs->addr0 = s_op.addr1_reg;
+ snandc->regs->addr1 = s_op.addr2_reg;
+
+ qcom_write_reg_dma(snandc, &snandc->regs->cmd, NAND_FLASH_CMD, 3, NAND_BAM_NEXT_SGL);
+ qcom_write_reg_dma(snandc, &snandc->regs->exec, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
+
+ ret = qcom_submit_descs(snandc);
+ if (ret)
+ dev_err(snandc->dev, "failure in sbumitting cmd descriptor\n");
+
+ return ret;
+}
+
+static int qcom_spi_io_op(struct qcom_nand_controller *snandc, const struct spi_mem_op *op)
+{
+ int ret, val, opcode;
+ bool copy = false, copy_ftr = false;
+
+ ret = qcom_spi_send_cmdaddr(snandc, op);
+ if (ret)
+ return ret;
+
+ snandc->buf_count = 0;
+ snandc->buf_start = 0;
+ qcom_clear_read_regs(snandc);
+ qcom_clear_bam_transaction(snandc);
+ opcode = op->cmd.opcode;
+
+ switch (opcode) {
+ case SPINAND_READID:
+ snandc->buf_count = 4;
+ qcom_read_reg_dma(snandc, NAND_READ_ID, 1, NAND_BAM_NEXT_SGL);
+ copy = true;
+ break;
+ case SPINAND_GET_FEATURE:
+ snandc->buf_count = 4;
+ qcom_read_reg_dma(snandc, NAND_FLASH_FEATURES, 1, NAND_BAM_NEXT_SGL);
+ copy_ftr = true;
+ break;
+ case SPINAND_SET_FEATURE:
+ snandc->regs->flash_feature = *(u32 *)op->data.buf.out;
+ qcom_write_reg_dma(snandc, &snandc->regs->flash_feature,
+ NAND_FLASH_FEATURES, 1, NAND_BAM_NEXT_SGL);
+ break;
+ default:
+ return 0;
+ }
+
+ ret = qcom_submit_descs(snandc);
+ if (ret)
+ dev_err(snandc->dev, "failure in submitting descriptor for:%d\n", opcode);
+
+ if (copy) {
+ qcom_nandc_dev_to_mem(snandc, true);
+ memcpy(op->data.buf.in, snandc->reg_read_buf, snandc->buf_count);
+ }
+
+ if (copy_ftr) {
+ qcom_nandc_dev_to_mem(snandc, true);
+ val = le32_to_cpu(*(__le32 *)snandc->reg_read_buf);
+ val >>= 8;
+ memcpy(op->data.buf.in, &val, snandc->buf_count);
+ }
+
+ return ret;
+}
+
+static bool qcom_spi_is_page_op(const struct spi_mem_op *op)
+{
+ if (op->addr.buswidth != 1 && op->addr.buswidth != 2 && op->addr.buswidth != 4)
+ return false;
+
+ if (op->data.dir == SPI_MEM_DATA_IN) {
+ if (op->addr.buswidth == 4 && op->data.buswidth == 4)
+ return true;
+
+ if (op->addr.nbytes == 2 && op->addr.buswidth == 1)
+ return true;
+
+ } else if (op->data.dir == SPI_MEM_DATA_OUT) {
+ if (op->data.buswidth == 4)
+ return true;
+ if (op->addr.nbytes == 2 && op->addr.buswidth == 1)
+ return true;
+ }
+
+ return false;
+}
+
+static bool qcom_spi_supports_op(struct spi_mem *mem, const struct spi_mem_op *op)
+{
+ if (!spi_mem_default_supports_op(mem, op))
+ return false;
+
+ if (op->cmd.nbytes != 1 || op->cmd.buswidth != 1)
+ return false;
+
+ if (qcom_spi_is_page_op(op))
+ return true;
+
+ return ((!op->addr.nbytes || op->addr.buswidth == 1) &&
+ (!op->dummy.nbytes || op->dummy.buswidth == 1) &&
+ (!op->data.nbytes || op->data.buswidth == 1));
+}
+
+static int qcom_spi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
+{
+ struct qcom_nand_controller *snandc = spi_controller_get_devdata(mem->spi->controller);
+
+ dev_dbg(snandc->dev, "OP %02x ADDR %08llX@%d:%u DATA %d:%u", op->cmd.opcode,
+ op->addr.val, op->addr.buswidth, op->addr.nbytes,
+ op->data.buswidth, op->data.nbytes);
+
+ if (qcom_spi_is_page_op(op)) {
+ if (op->data.dir == SPI_MEM_DATA_IN)
+ return qcom_spi_read_page_cache(snandc, op);
+ if (op->data.dir == SPI_MEM_DATA_OUT)
+ return qcom_spi_write_page_cache(snandc, op);
+ } else {
+ return qcom_spi_io_op(snandc, op);
+ }
+
+ return 0;
+}
+
+static const struct spi_controller_mem_ops qcom_spi_mem_ops = {
+ .supports_op = qcom_spi_supports_op,
+ .exec_op = qcom_spi_exec_op,
+};
+
+static const struct spi_controller_mem_caps qcom_spi_mem_caps = {
+ .ecc = true,
+};
+
+static int qcom_spi_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct spi_controller *ctlr;
+ struct qcom_nand_controller *snandc;
+ struct resource *res;
+ const void *dev_data;
+ struct qpic_ecc *ecc;
+ int ret;
+
+ ecc = devm_kzalloc(dev, sizeof(*ecc), GFP_KERNEL);
+ if (!ecc)
+ return -ENOMEM;
+
+ ctlr = __devm_spi_alloc_controller(dev, sizeof(*snandc), false);
+ if (!ctlr)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, ctlr);
+
+ snandc = spi_controller_get_devdata(ctlr);
+
+ snandc->ctlr = ctlr;
+ snandc->dev = dev;
+ snandc->ecc = ecc;
+
+ snandc->oob_buf = devm_kzalloc(dev, OOB_BUF_SIZE, GFP_KERNEL);
+ if (!snandc->oob_buf)
+ return -ENOMEM;
+
+ dev_data = of_device_get_match_data(dev);
+ if (!dev_data) {
+ dev_err(&pdev->dev, "failed to get device data\n");
+ return -ENODEV;
+ }
+
+ snandc->props = dev_data;
+ snandc->dev = &pdev->dev;
+
+ snandc->core_clk = devm_clk_get(dev, "core");
+ if (IS_ERR(snandc->core_clk))
+ return PTR_ERR(snandc->core_clk);
+
+ snandc->aon_clk = devm_clk_get(dev, "aon");
+ if (IS_ERR(snandc->aon_clk))
+ return PTR_ERR(snandc->aon_clk);
+
+ snandc->iomacro_clk = devm_clk_get(dev, "iom");
+ if (IS_ERR(snandc->iomacro_clk))
+ return PTR_ERR(snandc->iomacro_clk);
+
+ snandc->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+ if (IS_ERR(snandc->base))
+ return PTR_ERR(snandc->base);
+
+ snandc->base_phys = res->start;
+ snandc->base_dma = dma_map_resource(dev, res->start, resource_size(res),
+ DMA_BIDIRECTIONAL, 0);
+ if (dma_mapping_error(dev, snandc->base_dma))
+ return -ENXIO;
+
+ ret = clk_prepare_enable(snandc->core_clk);
+ if (ret)
+ goto err_core_clk;
+
+ ret = clk_prepare_enable(snandc->aon_clk);
+ if (ret)
+ goto err_aon_clk;
+
+ ret = clk_prepare_enable(snandc->iomacro_clk);
+ if (ret)
+ goto err_snandc_alloc;
+
+ ret = qcom_nandc_alloc(snandc);
+ if (ret)
+ goto err_iom_clk;
+
+ ret = qcom_spi_init(snandc);
+ if (ret)
+ goto err_init;
+
+ /* setup ECC engine */
+ snandc->ecc_eng.dev = &pdev->dev;
+ snandc->ecc_eng.integration = NAND_ECC_ENGINE_INTEGRATION_PIPELINED;
+ snandc->ecc_eng.ops = &qcom_spi_ecc_engine_ops_pipelined;
+ snandc->ecc_eng.priv = snandc;
+
+ ret = nand_ecc_register_on_host_hw_engine(&snandc->ecc_eng);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register ecc engine.\n");
+ goto err_init;
+ }
+
+ ctlr->num_chipselect = QPIC_QSPI_NUM_CS;
+ ctlr->mem_ops = &qcom_spi_mem_ops;
+ ctlr->mem_caps = &qcom_spi_mem_caps;
+ ctlr->dev.of_node = pdev->dev.of_node;
+ ctlr->mode_bits = SPI_TX_DUAL | SPI_RX_DUAL |
+ SPI_TX_QUAD | SPI_RX_QUAD;
+
+ ret = spi_register_controller(ctlr);
+ if (ret) {
+ dev_err(&pdev->dev, "spi_register_controller failed.\n");
+ goto err_init;
+ }
+
+ return 0;
+
+err_init:
+ qcom_nandc_unalloc(snandc);
+err_iom_clk:
+ clk_disable_unprepare(snandc->iomacro_clk);
+err_snandc_alloc:
+ clk_disable_unprepare(snandc->aon_clk);
+err_aon_clk:
+ clk_disable_unprepare(snandc->core_clk);
+err_core_clk:
+ dma_unmap_resource(dev, res->start, resource_size(res),
+ DMA_BIDIRECTIONAL, 0);
+ return ret;
+}
+
+static int qcom_spi_remove(struct platform_device *pdev)
+{
+ struct spi_controller *ctlr = platform_get_drvdata(pdev);
+ struct qcom_nand_controller *snandc = spi_controller_get_devdata(ctlr);
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ spi_unregister_controller(ctlr);
+
+ clk_disable_unprepare(snandc->aon_clk);
+ clk_disable_unprepare(snandc->core_clk);
+ clk_disable_unprepare(snandc->iomacro_clk);
+
+ dma_unmap_resource(&pdev->dev, snandc->base_dma, resource_size(res),
+ DMA_BIDIRECTIONAL, 0);
+ return 0;
+}
+
+static const struct qcom_nandc_props ipq9574_snandc_props = {
+ .dev_cmd_reg_start = 0x7000,
+ .supports_bam = true,
+};
+
+static const struct of_device_id qcom_snandc_of_match[] = {
+ {
+ .compatible = "qcom,spi-qpic-snand",
+ .data = &ipq9574_snandc_props,
+ },
+ {}
+}
+MODULE_DEVICE_TABLE(of, qcom_snandc_of_match);
+
+static struct platform_driver qcom_spi_driver = {
+ .driver = {
+ .name = "qcom_snand",
+ .of_match_table = qcom_snandc_of_match,
+ },
+ .probe = qcom_spi_probe,
+ .remove = qcom_spi_remove,
+};
+module_platform_driver(qcom_spi_driver);
+
+MODULE_DESCRIPTION("SPI driver for QPIC QSPI cores");
+MODULE_AUTHOR("Md Sadre Alam <quic_mdalam@quicinc.com>");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mtd/nand-qpic-common.h b/include/linux/mtd/nand-qpic-common.h
index 096c15d3be76..dd2b56125bc1 100644
--- a/include/linux/mtd/nand-qpic-common.h
+++ b/include/linux/mtd/nand-qpic-common.h
@@ -315,11 +315,56 @@ struct nandc_regs {
__le32 read_location_last1;
__le32 read_location_last2;
__le32 read_location_last3;
+ __le32 spi_cfg;
+ __le32 num_addr_cycle;
+ __le32 busy_wait_cnt;
+ __le32 flash_feature;
__le32 erased_cw_detect_cfg_clr;
__le32 erased_cw_detect_cfg_set;
};
+/*
+ * ECC state struct
+ * @corrected: ECC corrected
+ * @bitflips: Max bit flip
+ * @failed: ECC failed
+ */
+struct qcom_ecc_stats {
+ u32 corrected;
+ u32 bitflips;
+ u32 failed;
+};
+
+struct qpic_ecc {
+ struct device *dev;
+ const struct qpic_ecc_caps *caps;
+ struct completion done;
+ u32 sectors;
+ u8 *eccdata;
+ bool use_ecc;
+ u32 ecc_modes;
+ int ecc_bytes_hw;
+ int spare_bytes;
+ int bbm_size;
+ int ecc_mode;
+ int bytes;
+ int steps;
+ int step_size;
+ int strength;
+ int cw_size;
+ int cw_data;
+ u32 cfg0, cfg1;
+ u32 cfg0_raw, cfg1_raw;
+ u32 ecc_buf_cfg;
+ u32 ecc_bch_cfg;
+ u32 clrflashstatus;
+ u32 clrreadstatus;
+ bool bch_enabled;
+};
+
+struct qpic_ecc;
+
/*
* NAND controller data struct
*
@@ -329,6 +374,7 @@ struct nandc_regs {
*
* @core_clk: controller clock
* @aon_clk: another controller clock
+ * @iomacro_clk: io macro clock
*
* @regs: a contiguous chunk of memory for DMA register
* writes. contains the register values to be
@@ -338,6 +384,7 @@ struct nandc_regs {
* initialized via DT match data
*
* @controller: base controller structure
+ * @ctlr: spi controller structure
* @host_list: list containing all the chips attached to the
* controller
*
@@ -375,6 +422,7 @@ struct qcom_nand_controller {
struct clk *core_clk;
struct clk *aon_clk;
+ struct clk *iomacro_clk;
struct nandc_regs *regs;
struct bam_transaction *bam_txn;
@@ -382,6 +430,7 @@ struct qcom_nand_controller {
const struct qcom_nandc_props *props;
struct nand_controller controller;
+ struct spi_controller *ctlr;
struct list_head host_list;
union {
@@ -418,6 +467,21 @@ struct qcom_nand_controller {
u32 cmd1, vld;
bool exec_opwrite;
+ struct qpic_ecc *ecc;
+ struct qcom_ecc_stats ecc_stats;
+ struct nand_ecc_engine ecc_eng;
+ u8 *data_buf;
+ u8 *oob_buf;
+ u32 wlen;
+ u32 addr1;
+ u32 addr2;
+ u32 cmd;
+ u32 num_cw;
+ u32 pagesize;
+ bool oob_rw;
+ bool page_rw;
+ bool raw_rw;
+ bool read_last_cw;
};
/*
--
2.34.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* Re: [PATCH v5 5/7] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface
2024-05-08 8:36 ` [PATCH v5 5/7] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface Md Sadre Alam
@ 2024-05-16 12:56 ` Miquel Raynal
2024-05-20 10:07 ` Md Sadre Alam
0 siblings, 1 reply; 16+ messages in thread
From: Miquel Raynal @ 2024-05-16 12:56 UTC (permalink / raw)
To: Md Sadre Alam
Cc: broonie, robh, krzk+dt, conor+dt, andersson, konrad.dybcio,
richard, vigneshr, manivannan.sadhasivam, linux-arm-msm,
linux-spi, devicetree, linux-kernel, linux-mtd, quic_srichara,
quic_varada, Alexandru Gagniuc
Hi,
> --- /dev/null
> +++ b/drivers/spi/spi-qpic-snand.c
> @@ -0,0 +1,1423 @@
> +/*
> + * SPDX-License-Identifier: GPL-2.0
> + *
> + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
> + *
> + * Authors:
> + * Md Sadre Alam <quic_mdalam@quicinc.com>
> + * Sricharan R <quic_srichara@quicinc.com>
> + * Varadarajan Narayanan <quic_varada@quicinc.com>
> + */
> +#include <linux/bitops.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/dmaengine.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/dma/qcom_adm.h>
> +#include <linux/dma/qcom_bam_dma.h>
> +#include <linux/module.h>
> +#include <linux/mtd/partitions.h>
Not sure why partitions.h is needed here?
> +#include <linux/mtd/rawnand.h>
No raw NAND include.
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/mtd/nand-qpic-common.h>
> +#include <linux/mtd/spinand.h>
...
> +static int qcom_spi_ecc_init_ctx_pipelined(struct nand_device *nand)
> +{
> + struct qcom_nand_controller *snandc = nand_to_qcom_snand(nand);
> + struct nand_ecc_props *conf = &nand->ecc.ctx.conf;
> + struct nand_ecc_props *reqs = &nand->ecc.requirements;
> + struct nand_ecc_props *user = &nand->ecc.user_conf;
> + struct mtd_info *mtd = nanddev_to_mtd(nand);
> + int step_size = 0, strength = 0, steps;
> + int cwperpage, bad_block_byte;
> + struct qpic_ecc *ecc_cfg;
> +
> + cwperpage = mtd->writesize / NANDC_STEP_SIZE;
> + snandc->num_cw = cwperpage;
> +
> + ecc_cfg = kzalloc(sizeof(*ecc_cfg), GFP_KERNEL);
> + if (!ecc_cfg)
> + return -ENOMEM;
> +
> + nand->ecc.ctx.priv = ecc_cfg;
> +
> + if (user->step_size && user->strength) {
> + step_size = user->step_size;
> + strength = user->strength;
> + } else if (reqs->step_size && reqs->strength) {
> + step_size = reqs->step_size;
> + strength = reqs->strength;
> + }
> +
> + if (step_size && strength)
> + steps = mtd->writesize / step_size;
> +
> + ecc_cfg->ecc_bytes_hw = 7;
> + ecc_cfg->spare_bytes = 4;
> + ecc_cfg->bbm_size = 1;
> + ecc_cfg->bch_enabled = true;
> + ecc_cfg->bytes = ecc_cfg->ecc_bytes_hw + ecc_cfg->spare_bytes + ecc_cfg->bbm_size;
> +
> + ecc_cfg->steps = 4;
> + ecc_cfg->strength = 4;
> + ecc_cfg->step_size = 512;
> +
> + mtd_set_ooblayout(mtd, &qcom_spi_ooblayout);
> +
> + ecc_cfg->cw_data = 516;
> + ecc_cfg->cw_size = ecc_cfg->cw_data + ecc_cfg->bytes;
> + bad_block_byte = mtd->writesize - ecc_cfg->cw_size * (cwperpage - 1) + 1;
> +
> + ecc_cfg->cfg0 = (cwperpage - 1) << CW_PER_PAGE
> + | ecc_cfg->cw_data << UD_SIZE_BYTES
> + | 1 << DISABLE_STATUS_AFTER_WRITE
> + | 3 << NUM_ADDR_CYCLES
> + | ecc_cfg->ecc_bytes_hw << ECC_PARITY_SIZE_BYTES_RS
> + | 0 << STATUS_BFR_READ
> + | 1 << SET_RD_MODE_AFTER_STATUS
> + | ecc_cfg->spare_bytes << SPARE_SIZE_BYTES;
Can we please use FIELD_GET/FIELD_SET?
Also I think the coding style proposes:
val = foo |
bar;
instead of
val = foo
| bar;
...
> +static int qcom_spi_write_page_cache(struct qcom_nand_controller *snandc,
> + const struct spi_mem_op *op)
> +{
> + struct qpic_snand_op s_op = {};
> + u32 cmd;
> +
> + cmd = qcom_spi_cmd_mapping(snandc, op->cmd.opcode);
> + s_op.cmd_reg = cmd;
> +
> + if (op->cmd.opcode == SPINAND_PROGRAM_LOAD) {
> + if (snandc->page_rw)
> + snandc->data_buf = (u8 *)op->data.buf.out;
> + if (snandc->oob_rw)
> + snandc->oob_buf = (u8 *)op->data.buf.out;
Quick comment: looks wrong, no?
> + }
> +
> + return 0;
> +}
> +
> +static int qcom_spi_send_cmdaddr(struct qcom_nand_controller *snandc,
> + const struct spi_mem_op *op)
> +{
> + struct qpic_snand_op s_op = {};
> + u32 cmd;
> + int ret, opcode;
> +
> + cmd = qcom_spi_cmd_mapping(snandc, op->cmd.opcode);
> +
> + s_op.cmd_reg = cmd;
> + s_op.addr1_reg = op->addr.val;
> + s_op.addr2_reg = 0;
> +
> + opcode = op->cmd.opcode;
> +
> + switch (opcode) {
> + case SPINAND_WRITE_EN:
> + return 0;
> + case SPINAND_PROGRAM_EXECUTE:
> + s_op.addr1_reg = op->addr.val << 16;
> + s_op.addr2_reg = op->addr.val >> 16 & 0xff;
> + snandc->addr1 = s_op.addr1_reg;
> + snandc->addr2 = s_op.addr2_reg;
> + snandc->cmd = cmd;
> + return qcom_spi_program_execute(snandc, op);
> + case SPINAND_READ:
> + s_op.addr1_reg = (op->addr.val << 16);
> + s_op.addr2_reg = op->addr.val >> 16 & 0xff;
> + snandc->addr1 = s_op.addr1_reg;
> + snandc->addr2 = s_op.addr2_reg;
> + snandc->cmd = cmd;
> + return 0;
> + case SPINAND_ERASE:
> + s_op.addr2_reg = (op->addr.val >> 16) & 0xffff;
> + s_op.addr1_reg = op->addr.val;
> + snandc->addr1 = s_op.addr1_reg;
> + snandc->addr1 <<= 16;
Feels wrong as well
> + snandc->addr2 = s_op.addr2_reg;
> + snandc->cmd = cmd;
> + qcom_spi_block_erase(snandc);
> + return 0;
> + default:
> + break;
> + }
> +
> + snandc->buf_count = 0;
> + snandc->buf_start = 0;
> + qcom_clear_read_regs(snandc);
> + qcom_clear_bam_transaction(snandc);
> +
> + snandc->regs->cmd = s_op.cmd_reg;
> + snandc->regs->exec = 1;
> + snandc->regs->addr0 = s_op.addr1_reg;
> + snandc->regs->addr1 = s_op.addr2_reg;
> +
> + qcom_write_reg_dma(snandc, &snandc->regs->cmd, NAND_FLASH_CMD, 3, NAND_BAM_NEXT_SGL);
> + qcom_write_reg_dma(snandc, &snandc->regs->exec, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
> +
> + ret = qcom_submit_descs(snandc);
> + if (ret)
> + dev_err(snandc->dev, "failure in sbumitting cmd descriptor\n");
> +
> + return ret;
> +}
> +
> +static int qcom_spi_io_op(struct qcom_nand_controller *snandc, const struct spi_mem_op *op)
> +{
> + int ret, val, opcode;
> + bool copy = false, copy_ftr = false;
> +
> + ret = qcom_spi_send_cmdaddr(snandc, op);
> + if (ret)
> + return ret;
> +
> + snandc->buf_count = 0;
> + snandc->buf_start = 0;
> + qcom_clear_read_regs(snandc);
> + qcom_clear_bam_transaction(snandc);
> + opcode = op->cmd.opcode;
> +
> + switch (opcode) {
> + case SPINAND_READID:
> + snandc->buf_count = 4;
> + qcom_read_reg_dma(snandc, NAND_READ_ID, 1, NAND_BAM_NEXT_SGL);
> + copy = true;
> + break;
> + case SPINAND_GET_FEATURE:
> + snandc->buf_count = 4;
> + qcom_read_reg_dma(snandc, NAND_FLASH_FEATURES, 1, NAND_BAM_NEXT_SGL);
> + copy_ftr = true;
> + break;
> + case SPINAND_SET_FEATURE:
> + snandc->regs->flash_feature = *(u32 *)op->data.buf.out;
> + qcom_write_reg_dma(snandc, &snandc->regs->flash_feature,
> + NAND_FLASH_FEATURES, 1, NAND_BAM_NEXT_SGL);
> + break;
> + default:
> + return 0;
No error state?
> + }
> +
> + ret = qcom_submit_descs(snandc);
> + if (ret)
> + dev_err(snandc->dev, "failure in submitting descriptor for:%d\n", opcode);
> +
> + if (copy) {
> + qcom_nandc_dev_to_mem(snandc, true);
> + memcpy(op->data.buf.in, snandc->reg_read_buf, snandc->buf_count);
> + }
> +
> + if (copy_ftr) {
> + qcom_nandc_dev_to_mem(snandc, true);
> + val = le32_to_cpu(*(__le32 *)snandc->reg_read_buf);
> + val >>= 8;
> + memcpy(op->data.buf.in, &val, snandc->buf_count);
> + }
> +
> + return ret;
> +}
> +
> +static bool qcom_spi_is_page_op(const struct spi_mem_op *op)
> +{
> + if (op->addr.buswidth != 1 && op->addr.buswidth != 2 && op->addr.buswidth != 4)
> + return false;
> +
> + if (op->data.dir == SPI_MEM_DATA_IN) {
> + if (op->addr.buswidth == 4 && op->data.buswidth == 4)
> + return true;
> +
> + if (op->addr.nbytes == 2 && op->addr.buswidth == 1)
> + return true;
> +
> + } else if (op->data.dir == SPI_MEM_DATA_OUT) {
> + if (op->data.buswidth == 4)
> + return true;
> + if (op->addr.nbytes == 2 && op->addr.buswidth == 1)
> + return true;
> + }
> +
> + return false;
> +}
> +
> +static bool qcom_spi_supports_op(struct spi_mem *mem, const struct spi_mem_op *op)
> +{
> + if (!spi_mem_default_supports_op(mem, op))
> + return false;
> +
> + if (op->cmd.nbytes != 1 || op->cmd.buswidth != 1)
> + return false;
> +
> + if (qcom_spi_is_page_op(op))
> + return true;
> +
> + return ((!op->addr.nbytes || op->addr.buswidth == 1) &&
> + (!op->dummy.nbytes || op->dummy.buswidth == 1) &&
> + (!op->data.nbytes || op->data.buswidth == 1));
> +}
> +
> +static int qcom_spi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
> +{
> + struct qcom_nand_controller *snandc = spi_controller_get_devdata(mem->spi->controller);
> +
> + dev_dbg(snandc->dev, "OP %02x ADDR %08llX@%d:%u DATA %d:%u", op->cmd.opcode,
> + op->addr.val, op->addr.buswidth, op->addr.nbytes,
> + op->data.buswidth, op->data.nbytes);
> +
> + if (qcom_spi_is_page_op(op)) {
> + if (op->data.dir == SPI_MEM_DATA_IN)
> + return qcom_spi_read_page_cache(snandc, op);
> + if (op->data.dir == SPI_MEM_DATA_OUT)
> + return qcom_spi_write_page_cache(snandc, op);
> + } else {
> + return qcom_spi_io_op(snandc, op);
> + }
> +
> + return 0;
> +}
> +
> +static const struct spi_controller_mem_ops qcom_spi_mem_ops = {
> + .supports_op = qcom_spi_supports_op,
> + .exec_op = qcom_spi_exec_op,
> +};
> +
> +static const struct spi_controller_mem_caps qcom_spi_mem_caps = {
> + .ecc = true,
> +};
> +
> +static int qcom_spi_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct spi_controller *ctlr;
> + struct qcom_nand_controller *snandc;
> + struct resource *res;
> + const void *dev_data;
> + struct qpic_ecc *ecc;
> + int ret;
> +
> + ecc = devm_kzalloc(dev, sizeof(*ecc), GFP_KERNEL);
> + if (!ecc)
> + return -ENOMEM;
> +
> + ctlr = __devm_spi_alloc_controller(dev, sizeof(*snandc), false);
> + if (!ctlr)
> + return -ENOMEM;
> +
> + platform_set_drvdata(pdev, ctlr);
> +
> + snandc = spi_controller_get_devdata(ctlr);
> +
> + snandc->ctlr = ctlr;
> + snandc->dev = dev;
> + snandc->ecc = ecc;
> +
> + snandc->oob_buf = devm_kzalloc(dev, OOB_BUF_SIZE, GFP_KERNEL);
> + if (!snandc->oob_buf)
> + return -ENOMEM;
> +
> + dev_data = of_device_get_match_data(dev);
> + if (!dev_data) {
> + dev_err(&pdev->dev, "failed to get device data\n");
> + return -ENODEV;
> + }
> +
> + snandc->props = dev_data;
> + snandc->dev = &pdev->dev;
> +
> + snandc->core_clk = devm_clk_get(dev, "core");
> + if (IS_ERR(snandc->core_clk))
> + return PTR_ERR(snandc->core_clk);
> +
> + snandc->aon_clk = devm_clk_get(dev, "aon");
> + if (IS_ERR(snandc->aon_clk))
> + return PTR_ERR(snandc->aon_clk);
> +
> + snandc->iomacro_clk = devm_clk_get(dev, "iom");
> + if (IS_ERR(snandc->iomacro_clk))
> + return PTR_ERR(snandc->iomacro_clk);
> +
> + snandc->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
> + if (IS_ERR(snandc->base))
> + return PTR_ERR(snandc->base);
> +
> + snandc->base_phys = res->start;
> + snandc->base_dma = dma_map_resource(dev, res->start, resource_size(res),
> + DMA_BIDIRECTIONAL, 0);
> + if (dma_mapping_error(dev, snandc->base_dma))
> + return -ENXIO;
> +
> + ret = clk_prepare_enable(snandc->core_clk);
> + if (ret)
> + goto err_core_clk;
error labels should point at the next freeing instruction, they should
not be named against where they are called.
Same below.
> +
> + ret = clk_prepare_enable(snandc->aon_clk);
> + if (ret)
> + goto err_aon_clk;
> +
> + ret = clk_prepare_enable(snandc->iomacro_clk);
> + if (ret)
> + goto err_snandc_alloc;
This label is really badly named
> +
> + ret = qcom_nandc_alloc(snandc);
> + if (ret)
> + goto err_iom_clk;
goto err_dis_iom_clk; ?
> +
> + ret = qcom_spi_init(snandc);
> + if (ret)
> + goto err_init;
> +
> + /* setup ECC engine */
> + snandc->ecc_eng.dev = &pdev->dev;
> + snandc->ecc_eng.integration = NAND_ECC_ENGINE_INTEGRATION_PIPELINED;
> + snandc->ecc_eng.ops = &qcom_spi_ecc_engine_ops_pipelined;
> + snandc->ecc_eng.priv = snandc;
> +
> + ret = nand_ecc_register_on_host_hw_engine(&snandc->ecc_eng);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to register ecc engine.\n");
Maybe you can print the error if we want the dev_err() call to be
useful?
> + goto err_init;
> + }
> +
> + ctlr->num_chipselect = QPIC_QSPI_NUM_CS;
> + ctlr->mem_ops = &qcom_spi_mem_ops;
> + ctlr->mem_caps = &qcom_spi_mem_caps;
> + ctlr->dev.of_node = pdev->dev.of_node;
> + ctlr->mode_bits = SPI_TX_DUAL | SPI_RX_DUAL |
> + SPI_TX_QUAD | SPI_RX_QUAD;
> +
> + ret = spi_register_controller(ctlr);
> + if (ret) {
> + dev_err(&pdev->dev, "spi_register_controller failed.\n");
> + goto err_init;
> + }
> +
> + return 0;
> +
> +err_init:
> + qcom_nandc_unalloc(snandc);
> +err_iom_clk:
> + clk_disable_unprepare(snandc->iomacro_clk);
> +err_snandc_alloc:
> + clk_disable_unprepare(snandc->aon_clk);
> +err_aon_clk:
> + clk_disable_unprepare(snandc->core_clk);
> +err_core_clk:
> + dma_unmap_resource(dev, res->start, resource_size(res),
> + DMA_BIDIRECTIONAL, 0);
> + return ret;
> +}
> +
> +static int qcom_spi_remove(struct platform_device *pdev)
> +{
> + struct spi_controller *ctlr = platform_get_drvdata(pdev);
> + struct qcom_nand_controller *snandc = spi_controller_get_devdata(ctlr);
> + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +
> + spi_unregister_controller(ctlr);
> +
> + clk_disable_unprepare(snandc->aon_clk);
> + clk_disable_unprepare(snandc->core_clk);
> + clk_disable_unprepare(snandc->iomacro_clk);
> +
> + dma_unmap_resource(&pdev->dev, snandc->base_dma, resource_size(res),
> + DMA_BIDIRECTIONAL, 0);
No unalloc?
BTW unalloc is a bit weird. "free" or "cleanup" might be better.
> + return 0;
> +}
> +
> +static const struct qcom_nandc_props ipq9574_snandc_props = {
> + .dev_cmd_reg_start = 0x7000,
> + .supports_bam = true,
> +};
> +
> +static const struct of_device_id qcom_snandc_of_match[] = {
> + {
> + .compatible = "qcom,spi-qpic-snand",
> + .data = &ipq9574_snandc_props,
> + },
> + {}
> +}
> +MODULE_DEVICE_TABLE(of, qcom_snandc_of_match);
> +
> +static struct platform_driver qcom_spi_driver = {
> + .driver = {
> + .name = "qcom_snand",
> + .of_match_table = qcom_snandc_of_match,
> + },
> + .probe = qcom_spi_probe,
> + .remove = qcom_spi_remove,
> +};
> +module_platform_driver(qcom_spi_driver);
> +
> +MODULE_DESCRIPTION("SPI driver for QPIC QSPI cores");
> +MODULE_AUTHOR("Md Sadre Alam <quic_mdalam@quicinc.com>");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/mtd/nand-qpic-common.h b/include/linux/mtd/nand-qpic-common.h
> index 096c15d3be76..dd2b56125bc1 100644
> --- a/include/linux/mtd/nand-qpic-common.h
> +++ b/include/linux/mtd/nand-qpic-common.h
> @@ -315,11 +315,56 @@ struct nandc_regs {
> __le32 read_location_last1;
> __le32 read_location_last2;
> __le32 read_location_last3;
> + __le32 spi_cfg;
> + __le32 num_addr_cycle;
> + __le32 busy_wait_cnt;
> + __le32 flash_feature;
>
> __le32 erased_cw_detect_cfg_clr;
> __le32 erased_cw_detect_cfg_set;
> };
>
> +/*
> + * ECC state struct
> + * @corrected: ECC corrected
> + * @bitflips: Max bit flip
> + * @failed: ECC failed
> + */
> +struct qcom_ecc_stats {
> + u32 corrected;
> + u32 bitflips;
> + u32 failed;
> +};
> +
> +struct qpic_ecc {
> + struct device *dev;
> + const struct qpic_ecc_caps *caps;
> + struct completion done;
> + u32 sectors;
> + u8 *eccdata;
> + bool use_ecc;
> + u32 ecc_modes;
> + int ecc_bytes_hw;
> + int spare_bytes;
> + int bbm_size;
> + int ecc_mode;
> + int bytes;
> + int steps;
> + int step_size;
> + int strength;
> + int cw_size;
> + int cw_data;
> + u32 cfg0, cfg1;
> + u32 cfg0_raw, cfg1_raw;
> + u32 ecc_buf_cfg;
> + u32 ecc_bch_cfg;
> + u32 clrflashstatus;
> + u32 clrreadstatus;
> + bool bch_enabled;
> +};
> +
> +struct qpic_ecc;
> +
> /*
> * NAND controller data struct
> *
> @@ -329,6 +374,7 @@ struct nandc_regs {
> *
> * @core_clk: controller clock
> * @aon_clk: another controller clock
> + * @iomacro_clk: io macro clock
> *
> * @regs: a contiguous chunk of memory for DMA register
> * writes. contains the register values to be
> @@ -338,6 +384,7 @@ struct nandc_regs {
> * initialized via DT match data
> *
> * @controller: base controller structure
> + * @ctlr: spi controller structure
> * @host_list: list containing all the chips attached to the
> * controller
> *
> @@ -375,6 +422,7 @@ struct qcom_nand_controller {
>
> struct clk *core_clk;
> struct clk *aon_clk;
> + struct clk *iomacro_clk;
>
> struct nandc_regs *regs;
> struct bam_transaction *bam_txn;
> @@ -382,6 +430,7 @@ struct qcom_nand_controller {
> const struct qcom_nandc_props *props;
>
> struct nand_controller controller;
> + struct spi_controller *ctlr;
> struct list_head host_list;
>
> union {
> @@ -418,6 +467,21 @@ struct qcom_nand_controller {
>
> u32 cmd1, vld;
> bool exec_opwrite;
> + struct qpic_ecc *ecc;
> + struct qcom_ecc_stats ecc_stats;
> + struct nand_ecc_engine ecc_eng;
> + u8 *data_buf;
> + u8 *oob_buf;
> + u32 wlen;
> + u32 addr1;
> + u32 addr2;
> + u32 cmd;
> + u32 num_cw;
> + u32 pagesize;
> + bool oob_rw;
> + bool page_rw;
> + bool raw_rw;
> + bool read_last_cw;
> };
If all these definitions are only used by the spi controller, I don't
see why you want to put them in the common file.
Thanks,
Miquèl
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: [PATCH v5 5/7] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface
2024-05-16 12:56 ` Miquel Raynal
@ 2024-05-20 10:07 ` Md Sadre Alam
2024-05-20 12:43 ` Miquel Raynal
0 siblings, 1 reply; 16+ messages in thread
From: Md Sadre Alam @ 2024-05-20 10:07 UTC (permalink / raw)
To: Miquel Raynal
Cc: broonie, robh, krzk+dt, conor+dt, andersson, konrad.dybcio,
richard, vigneshr, manivannan.sadhasivam, linux-arm-msm,
linux-spi, devicetree, linux-kernel, linux-mtd, quic_srichara,
quic_varada, Alexandru Gagniuc
On 5/16/2024 6:26 PM, Miquel Raynal wrote:
> Hi,
>
>> --- /dev/null
>> +++ b/drivers/spi/spi-qpic-snand.c
>> @@ -0,0 +1,1423 @@
>> +/*
>> + * SPDX-License-Identifier: GPL-2.0
>> + *
>> + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
>> + *
>> + * Authors:
>> + * Md Sadre Alam <quic_mdalam@quicinc.com>
>> + * Sricharan R <quic_srichara@quicinc.com>
>> + * Varadarajan Narayanan <quic_varada@quicinc.com>
>> + */
>> +#include <linux/bitops.h>
>> +#include <linux/clk.h>
>> +#include <linux/delay.h>
>> +#include <linux/dmaengine.h>
>> +#include <linux/dma-mapping.h>
>> +#include <linux/dma/qcom_adm.h>
>> +#include <linux/dma/qcom_bam_dma.h>
>> +#include <linux/module.h>
>> +#include <linux/mtd/partitions.h>
>
> Not sure why partitions.h is needed here?
Will remove in next patch
>
>> +#include <linux/mtd/rawnand.h>
>
> No raw NAND include.
Ok
>
>> +#include <linux/of.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/slab.h>
>> +#include <linux/mtd/nand-qpic-common.h>
>> +#include <linux/mtd/spinand.h>
>
> ...
>
>> +static int qcom_spi_ecc_init_ctx_pipelined(struct nand_device *nand)
>> +{
>> + struct qcom_nand_controller *snandc = nand_to_qcom_snand(nand);
>> + struct nand_ecc_props *conf = &nand->ecc.ctx.conf;
>> + struct nand_ecc_props *reqs = &nand->ecc.requirements;
>> + struct nand_ecc_props *user = &nand->ecc.user_conf;
>> + struct mtd_info *mtd = nanddev_to_mtd(nand);
>> + int step_size = 0, strength = 0, steps;
>> + int cwperpage, bad_block_byte;
>> + struct qpic_ecc *ecc_cfg;
>> +
>> + cwperpage = mtd->writesize / NANDC_STEP_SIZE;
>> + snandc->num_cw = cwperpage;
>> +
>> + ecc_cfg = kzalloc(sizeof(*ecc_cfg), GFP_KERNEL);
>> + if (!ecc_cfg)
>> + return -ENOMEM;
>> +
>> + nand->ecc.ctx.priv = ecc_cfg;
>> +
>> + if (user->step_size && user->strength) {
>> + step_size = user->step_size;
>> + strength = user->strength;
>> + } else if (reqs->step_size && reqs->strength) {
>> + step_size = reqs->step_size;
>> + strength = reqs->strength;
>> + }
>> +
>> + if (step_size && strength)
>> + steps = mtd->writesize / step_size;
>> +
>> + ecc_cfg->ecc_bytes_hw = 7;
>> + ecc_cfg->spare_bytes = 4;
>> + ecc_cfg->bbm_size = 1;
>> + ecc_cfg->bch_enabled = true;
>> + ecc_cfg->bytes = ecc_cfg->ecc_bytes_hw + ecc_cfg->spare_bytes + ecc_cfg->bbm_size;
>> +
>> + ecc_cfg->steps = 4;
>> + ecc_cfg->strength = 4;
>> + ecc_cfg->step_size = 512;
>> +
>> + mtd_set_ooblayout(mtd, &qcom_spi_ooblayout);
>> +
>> + ecc_cfg->cw_data = 516;
>> + ecc_cfg->cw_size = ecc_cfg->cw_data + ecc_cfg->bytes;
>> + bad_block_byte = mtd->writesize - ecc_cfg->cw_size * (cwperpage - 1) + 1;
>> +
>> + ecc_cfg->cfg0 = (cwperpage - 1) << CW_PER_PAGE
>> + | ecc_cfg->cw_data << UD_SIZE_BYTES
>> + | 1 << DISABLE_STATUS_AFTER_WRITE
>> + | 3 << NUM_ADDR_CYCLES
>> + | ecc_cfg->ecc_bytes_hw << ECC_PARITY_SIZE_BYTES_RS
>> + | 0 << STATUS_BFR_READ
>> + | 1 << SET_RD_MODE_AFTER_STATUS
>> + | ecc_cfg->spare_bytes << SPARE_SIZE_BYTES;
>
> Can we please use FIELD_GET/FIELD_SET?
>
> Also I think the coding style proposes:
>
> val = foo |
> bar;
>
> instead of
>
> val = foo
> | bar;
>
Ok, Will fix in next patch.
>
> ...
>
>> +static int qcom_spi_write_page_cache(struct qcom_nand_controller *snandc,
>> + const struct spi_mem_op *op)
>> +{
>> + struct qpic_snand_op s_op = {};
>> + u32 cmd;
>> +
>> + cmd = qcom_spi_cmd_mapping(snandc, op->cmd.opcode);
>> + s_op.cmd_reg = cmd;
>> +
>> + if (op->cmd.opcode == SPINAND_PROGRAM_LOAD) {
>> + if (snandc->page_rw)
>> + snandc->data_buf = (u8 *)op->data.buf.out;
>> + if (snandc->oob_rw)
>> + snandc->oob_buf = (u8 *)op->data.buf.out;
>
> Quick comment: looks wrong, no?
Yes , oob_buf not needed here. will fix in next patch.
>
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int qcom_spi_send_cmdaddr(struct qcom_nand_controller *snandc,
>> + const struct spi_mem_op *op)
>> +{
>> + struct qpic_snand_op s_op = {};
>> + u32 cmd;
>> + int ret, opcode;
>> +
>> + cmd = qcom_spi_cmd_mapping(snandc, op->cmd.opcode);
>> +
>> + s_op.cmd_reg = cmd;
>> + s_op.addr1_reg = op->addr.val;
>> + s_op.addr2_reg = 0;
>> +
>> + opcode = op->cmd.opcode;
>> +
>> + switch (opcode) {
>> + case SPINAND_WRITE_EN:
>> + return 0;
>> + case SPINAND_PROGRAM_EXECUTE:
>> + s_op.addr1_reg = op->addr.val << 16;
>> + s_op.addr2_reg = op->addr.val >> 16 & 0xff;
>> + snandc->addr1 = s_op.addr1_reg;
>> + snandc->addr2 = s_op.addr2_reg;
>> + snandc->cmd = cmd;
>> + return qcom_spi_program_execute(snandc, op);
>> + case SPINAND_READ:
>> + s_op.addr1_reg = (op->addr.val << 16);
>> + s_op.addr2_reg = op->addr.val >> 16 & 0xff;
>> + snandc->addr1 = s_op.addr1_reg;
>> + snandc->addr2 = s_op.addr2_reg;
>> + snandc->cmd = cmd;
>> + return 0;
>> + case SPINAND_ERASE:
>> + s_op.addr2_reg = (op->addr.val >> 16) & 0xffff;
>> + s_op.addr1_reg = op->addr.val;
>> + snandc->addr1 = s_op.addr1_reg;
>> + snandc->addr1 <<= 16;
>
> Feels wrong as well
Ok , will fix in next patch.
>
>> + snandc->addr2 = s_op.addr2_reg;
>> + snandc->cmd = cmd;
>> + qcom_spi_block_erase(snandc);
>> + return 0;
>> + default:
>> + break;
>> + }
>> +
>> + snandc->buf_count = 0;
>> + snandc->buf_start = 0;
>> + qcom_clear_read_regs(snandc);
>> + qcom_clear_bam_transaction(snandc);
>> +
>> + snandc->regs->cmd = s_op.cmd_reg;
>> + snandc->regs->exec = 1;
>> + snandc->regs->addr0 = s_op.addr1_reg;
>> + snandc->regs->addr1 = s_op.addr2_reg;
>> +
>> + qcom_write_reg_dma(snandc, &snandc->regs->cmd, NAND_FLASH_CMD, 3, NAND_BAM_NEXT_SGL);
>> + qcom_write_reg_dma(snandc, &snandc->regs->exec, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
>> +
>> + ret = qcom_submit_descs(snandc);
>> + if (ret)
>> + dev_err(snandc->dev, "failure in sbumitting cmd descriptor\n");
>> +
>> + return ret;
>> +}
>> +
>> +static int qcom_spi_io_op(struct qcom_nand_controller *snandc, const struct spi_mem_op *op)
>> +{
>> + int ret, val, opcode;
>> + bool copy = false, copy_ftr = false;
>> +
>> + ret = qcom_spi_send_cmdaddr(snandc, op);
>> + if (ret)
>> + return ret;
>> +
>> + snandc->buf_count = 0;
>> + snandc->buf_start = 0;
>> + qcom_clear_read_regs(snandc);
>> + qcom_clear_bam_transaction(snandc);
>> + opcode = op->cmd.opcode;
>> +
>> + switch (opcode) {
>> + case SPINAND_READID:
>> + snandc->buf_count = 4;
>> + qcom_read_reg_dma(snandc, NAND_READ_ID, 1, NAND_BAM_NEXT_SGL);
>> + copy = true;
>> + break;
>> + case SPINAND_GET_FEATURE:
>> + snandc->buf_count = 4;
>> + qcom_read_reg_dma(snandc, NAND_FLASH_FEATURES, 1, NAND_BAM_NEXT_SGL);
>> + copy_ftr = true;
>> + break;
>> + case SPINAND_SET_FEATURE:
>> + snandc->regs->flash_feature = *(u32 *)op->data.buf.out;
>> + qcom_write_reg_dma(snandc, &snandc->regs->flash_feature,
>> + NAND_FLASH_FEATURES, 1, NAND_BAM_NEXT_SGL);
>> + break;
>> + default:
>> + return 0;
>
> No error state?
We can't return return error here , since this API is not for checking supported command.
We can return error only if we submitted the descriptor. That already we are handling.
>
>> + }
>> +
>> + ret = qcom_submit_descs(snandc);
>> + if (ret)
>> + dev_err(snandc->dev, "failure in submitting descriptor for:%d\n", opcode);
>> +
>> + if (copy) {
>> + qcom_nandc_dev_to_mem(snandc, true);
>> + memcpy(op->data.buf.in, snandc->reg_read_buf, snandc->buf_count);
>> + }
>> +
>> + if (copy_ftr) {
>> + qcom_nandc_dev_to_mem(snandc, true);
>> + val = le32_to_cpu(*(__le32 *)snandc->reg_read_buf);
>> + val >>= 8;
>> + memcpy(op->data.buf.in, &val, snandc->buf_count);
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static bool qcom_spi_is_page_op(const struct spi_mem_op *op)
>> +{
>> + if (op->addr.buswidth != 1 && op->addr.buswidth != 2 && op->addr.buswidth != 4)
>> + return false;
>> +
>> + if (op->data.dir == SPI_MEM_DATA_IN) {
>> + if (op->addr.buswidth == 4 && op->data.buswidth == 4)
>> + return true;
>> +
>> + if (op->addr.nbytes == 2 && op->addr.buswidth == 1)
>> + return true;
>> +
>> + } else if (op->data.dir == SPI_MEM_DATA_OUT) {
>> + if (op->data.buswidth == 4)
>> + return true;
>> + if (op->addr.nbytes == 2 && op->addr.buswidth == 1)
>> + return true;
>> + }
>> +
>> + return false;
>> +}
>> +
>> +static bool qcom_spi_supports_op(struct spi_mem *mem, const struct spi_mem_op *op)
>> +{
>> + if (!spi_mem_default_supports_op(mem, op))
>> + return false;
>> +
>> + if (op->cmd.nbytes != 1 || op->cmd.buswidth != 1)
>> + return false;
>> +
>> + if (qcom_spi_is_page_op(op))
>> + return true;
>> +
>> + return ((!op->addr.nbytes || op->addr.buswidth == 1) &&
>> + (!op->dummy.nbytes || op->dummy.buswidth == 1) &&
>> + (!op->data.nbytes || op->data.buswidth == 1));
>> +}
>> +
>> +static int qcom_spi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
>> +{
>> + struct qcom_nand_controller *snandc = spi_controller_get_devdata(mem->spi->controller);
>> +
>> + dev_dbg(snandc->dev, "OP %02x ADDR %08llX@%d:%u DATA %d:%u", op->cmd.opcode,
>> + op->addr.val, op->addr.buswidth, op->addr.nbytes,
>> + op->data.buswidth, op->data.nbytes);
>> +
>> + if (qcom_spi_is_page_op(op)) {
>> + if (op->data.dir == SPI_MEM_DATA_IN)
>> + return qcom_spi_read_page_cache(snandc, op);
>> + if (op->data.dir == SPI_MEM_DATA_OUT)
>> + return qcom_spi_write_page_cache(snandc, op);
>> + } else {
>> + return qcom_spi_io_op(snandc, op);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static const struct spi_controller_mem_ops qcom_spi_mem_ops = {
>> + .supports_op = qcom_spi_supports_op,
>> + .exec_op = qcom_spi_exec_op,
>> +};
>> +
>> +static const struct spi_controller_mem_caps qcom_spi_mem_caps = {
>> + .ecc = true,
>> +};
>> +
>> +static int qcom_spi_probe(struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct spi_controller *ctlr;
>> + struct qcom_nand_controller *snandc;
>> + struct resource *res;
>> + const void *dev_data;
>> + struct qpic_ecc *ecc;
>> + int ret;
>> +
>> + ecc = devm_kzalloc(dev, sizeof(*ecc), GFP_KERNEL);
>> + if (!ecc)
>> + return -ENOMEM;
>> +
>> + ctlr = __devm_spi_alloc_controller(dev, sizeof(*snandc), false);
>> + if (!ctlr)
>> + return -ENOMEM;
>> +
>> + platform_set_drvdata(pdev, ctlr);
>> +
>> + snandc = spi_controller_get_devdata(ctlr);
>> +
>> + snandc->ctlr = ctlr;
>> + snandc->dev = dev;
>> + snandc->ecc = ecc;
>> +
>> + snandc->oob_buf = devm_kzalloc(dev, OOB_BUF_SIZE, GFP_KERNEL);
>> + if (!snandc->oob_buf)
>> + return -ENOMEM;
>> +
>> + dev_data = of_device_get_match_data(dev);
>> + if (!dev_data) {
>> + dev_err(&pdev->dev, "failed to get device data\n");
>> + return -ENODEV;
>> + }
>> +
>> + snandc->props = dev_data;
>> + snandc->dev = &pdev->dev;
>> +
>> + snandc->core_clk = devm_clk_get(dev, "core");
>> + if (IS_ERR(snandc->core_clk))
>> + return PTR_ERR(snandc->core_clk);
>> +
>> + snandc->aon_clk = devm_clk_get(dev, "aon");
>> + if (IS_ERR(snandc->aon_clk))
>> + return PTR_ERR(snandc->aon_clk);
>> +
>> + snandc->iomacro_clk = devm_clk_get(dev, "iom");
>> + if (IS_ERR(snandc->iomacro_clk))
>> + return PTR_ERR(snandc->iomacro_clk);
>> +
>> + snandc->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
>> + if (IS_ERR(snandc->base))
>> + return PTR_ERR(snandc->base);
>> +
>> + snandc->base_phys = res->start;
>> + snandc->base_dma = dma_map_resource(dev, res->start, resource_size(res),
>> + DMA_BIDIRECTIONAL, 0);
>> + if (dma_mapping_error(dev, snandc->base_dma))
>> + return -ENXIO;
>> +
>> + ret = clk_prepare_enable(snandc->core_clk);
>> + if (ret)
>> + goto err_core_clk;
>
> error labels should point at the next freeing instruction, they should
> not be named against where they are called.
Ok
>
> Same below.
Ok
>
>> +
>> + ret = clk_prepare_enable(snandc->aon_clk);
>> + if (ret)
>> + goto err_aon_clk;
>> +
>> + ret = clk_prepare_enable(snandc->iomacro_clk);
>> + if (ret)
>> + goto err_snandc_alloc;
>
> This label is really badly named
Ok
>
>> +
>> + ret = qcom_nandc_alloc(snandc);
>> + if (ret)
>> + goto err_iom_clk;
>
> goto err_dis_iom_clk; ?
OK
>
>> +
>> + ret = qcom_spi_init(snandc);
>> + if (ret)
>> + goto err_init;
>> +
>> + /* setup ECC engine */
>> + snandc->ecc_eng.dev = &pdev->dev;
>> + snandc->ecc_eng.integration = NAND_ECC_ENGINE_INTEGRATION_PIPELINED;
>> + snandc->ecc_eng.ops = &qcom_spi_ecc_engine_ops_pipelined;
>> + snandc->ecc_eng.priv = snandc;
>> +
>> + ret = nand_ecc_register_on_host_hw_engine(&snandc->ecc_eng);
>> + if (ret) {
>> + dev_err(&pdev->dev, "failed to register ecc engine.\n");
>
> Maybe you can print the error if we want the dev_err() call to be
> useful?
Ok
>
>> + goto err_init;
>> + }
>> +
>> + ctlr->num_chipselect = QPIC_QSPI_NUM_CS;
>> + ctlr->mem_ops = &qcom_spi_mem_ops;
>> + ctlr->mem_caps = &qcom_spi_mem_caps;
>> + ctlr->dev.of_node = pdev->dev.of_node;
>> + ctlr->mode_bits = SPI_TX_DUAL | SPI_RX_DUAL |
>> + SPI_TX_QUAD | SPI_RX_QUAD;
>> +
>> + ret = spi_register_controller(ctlr);
>> + if (ret) {
>> + dev_err(&pdev->dev, "spi_register_controller failed.\n");
>> + goto err_init;
>> + }
>> +
>> + return 0;
>> +
>> +err_init:
>> + qcom_nandc_unalloc(snandc);
>> +err_iom_clk:
>> + clk_disable_unprepare(snandc->iomacro_clk);
>> +err_snandc_alloc:
>> + clk_disable_unprepare(snandc->aon_clk);
>> +err_aon_clk:
>> + clk_disable_unprepare(snandc->core_clk);
>> +err_core_clk:
>> + dma_unmap_resource(dev, res->start, resource_size(res),
>> + DMA_BIDIRECTIONAL, 0);
>> + return ret;
>> +}
>> +
>> +static int qcom_spi_remove(struct platform_device *pdev)
>> +{
>> + struct spi_controller *ctlr = platform_get_drvdata(pdev);
>> + struct qcom_nand_controller *snandc = spi_controller_get_devdata(ctlr);
>> + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +
>> + spi_unregister_controller(ctlr);
>> +
>> + clk_disable_unprepare(snandc->aon_clk);
>> + clk_disable_unprepare(snandc->core_clk);
>> + clk_disable_unprepare(snandc->iomacro_clk);
>> +
>> + dma_unmap_resource(&pdev->dev, snandc->base_dma, resource_size(res),
>> + DMA_BIDIRECTIONAL, 0);
>
> No unalloc?
>
> BTW unalloc is a bit weird. "free" or "cleanup" might be better.
We are having a existing api called qcom_nandc_unalloc() , will use the same in
next patch.
>
>> + return 0;
>> +}
>> +
>> +static const struct qcom_nandc_props ipq9574_snandc_props = {
>> + .dev_cmd_reg_start = 0x7000,
>> + .supports_bam = true,
>> +};
>> +
>> +static const struct of_device_id qcom_snandc_of_match[] = {
>> + {
>> + .compatible = "qcom,spi-qpic-snand",
>> + .data = &ipq9574_snandc_props,
>> + },
>> + {}
>> +}
>> +MODULE_DEVICE_TABLE(of, qcom_snandc_of_match);
>> +
>> +static struct platform_driver qcom_spi_driver = {
>> + .driver = {
>> + .name = "qcom_snand",
>> + .of_match_table = qcom_snandc_of_match,
>> + },
>> + .probe = qcom_spi_probe,
>> + .remove = qcom_spi_remove,
>> +};
>> +module_platform_driver(qcom_spi_driver);
>> +
>> +MODULE_DESCRIPTION("SPI driver for QPIC QSPI cores");
>> +MODULE_AUTHOR("Md Sadre Alam <quic_mdalam@quicinc.com>");
>> +MODULE_LICENSE("GPL");
>> diff --git a/include/linux/mtd/nand-qpic-common.h b/include/linux/mtd/nand-qpic-common.h
>> index 096c15d3be76..dd2b56125bc1 100644
>> --- a/include/linux/mtd/nand-qpic-common.h
>> +++ b/include/linux/mtd/nand-qpic-common.h
>> @@ -315,11 +315,56 @@ struct nandc_regs {
>> __le32 read_location_last1;
>> __le32 read_location_last2;
>> __le32 read_location_last3;
>> + __le32 spi_cfg;
>> + __le32 num_addr_cycle;
>> + __le32 busy_wait_cnt;
>> + __le32 flash_feature;
>>
>> __le32 erased_cw_detect_cfg_clr;
>> __le32 erased_cw_detect_cfg_set;
>> };
>>
>> +/*
>> + * ECC state struct
>> + * @corrected: ECC corrected
>> + * @bitflips: Max bit flip
>> + * @failed: ECC failed
>> + */
>> +struct qcom_ecc_stats {
>> + u32 corrected;
>> + u32 bitflips;
>> + u32 failed;
>> +};
>> +
>> +struct qpic_ecc {
>> + struct device *dev;
>> + const struct qpic_ecc_caps *caps;
>> + struct completion done;
>> + u32 sectors;
>> + u8 *eccdata;
>> + bool use_ecc;
>> + u32 ecc_modes;
>> + int ecc_bytes_hw;
>> + int spare_bytes;
>> + int bbm_size;
>> + int ecc_mode;
>> + int bytes;
>> + int steps;
>> + int step_size;
>> + int strength;
>> + int cw_size;
>> + int cw_data;
>> + u32 cfg0, cfg1;
>> + u32 cfg0_raw, cfg1_raw;
>> + u32 ecc_buf_cfg;
>> + u32 ecc_bch_cfg;
>> + u32 clrflashstatus;
>> + u32 clrreadstatus;
>> + bool bch_enabled;
>> +};
>> +
>> +struct qpic_ecc;
>> +
>> /*
>> * NAND controller data struct
>> *
>> @@ -329,6 +374,7 @@ struct nandc_regs {
>> *
>> * @core_clk: controller clock
>> * @aon_clk: another controller clock
>> + * @iomacro_clk: io macro clock
>> *
>> * @regs: a contiguous chunk of memory for DMA register
>> * writes. contains the register values to be
>> @@ -338,6 +384,7 @@ struct nandc_regs {
>> * initialized via DT match data
>> *
>> * @controller: base controller structure
>> + * @ctlr: spi controller structure
>> * @host_list: list containing all the chips attached to the
>> * controller
>> *
>> @@ -375,6 +422,7 @@ struct qcom_nand_controller {
>>
>> struct clk *core_clk;
>> struct clk *aon_clk;
>> + struct clk *iomacro_clk;
>>
>> struct nandc_regs *regs;
>> struct bam_transaction *bam_txn;
>> @@ -382,6 +430,7 @@ struct qcom_nand_controller {
>> const struct qcom_nandc_props *props;
>>
>> struct nand_controller controller;
>> + struct spi_controller *ctlr;
>> struct list_head host_list;
>>
>> union {
>> @@ -418,6 +467,21 @@ struct qcom_nand_controller {
>>
>> u32 cmd1, vld;
>> bool exec_opwrite;
>> + struct qpic_ecc *ecc;
>> + struct qcom_ecc_stats ecc_stats;
>> + struct nand_ecc_engine ecc_eng;
>> + u8 *data_buf;
>> + u8 *oob_buf;
>> + u32 wlen;
>> + u32 addr1;
>> + u32 addr2;
>> + u32 cmd;
>> + u32 num_cw;
>> + u32 pagesize;
>> + bool oob_rw;
>> + bool page_rw;
>> + bool raw_rw;
>> + bool read_last_cw;
>> };
>
> If all these definitions are only used by the spi controller, I don't
> see why you want to put them in the common file.
We are using qcom_nand_controller{..} structure as common b/w raw nand
and spi nand. These all variables will be used by spi nand only , but
qcom_nand_controller structure is passed across all the SPI API, thats
why define these all variables inside qcom_nand_controller structure.
so that i can access directlty.
>
> Thanks,
> Miquèl
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: [PATCH v5 5/7] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface
2024-05-20 10:07 ` Md Sadre Alam
@ 2024-05-20 12:43 ` Miquel Raynal
2024-05-20 15:25 ` Md Sadre Alam
0 siblings, 1 reply; 16+ messages in thread
From: Miquel Raynal @ 2024-05-20 12:43 UTC (permalink / raw)
To: Md Sadre Alam
Cc: broonie, robh, krzk+dt, conor+dt, andersson, konrad.dybcio,
richard, vigneshr, manivannan.sadhasivam, linux-arm-msm,
linux-spi, devicetree, linux-kernel, linux-mtd, quic_srichara,
quic_varada, Alexandru Gagniuc
Hi,
> >> +static int qcom_spi_io_op(struct qcom_nand_controller *snandc, const struct spi_mem_op *op)
> >> +{
> >> + int ret, val, opcode;
> >> + bool copy = false, copy_ftr = false;
> >> +
> >> + ret = qcom_spi_send_cmdaddr(snandc, op);
> >> + if (ret)
> >> + return ret;
> >> +
> >> + snandc->buf_count = 0;
> >> + snandc->buf_start = 0;
> >> + qcom_clear_read_regs(snandc);
> >> + qcom_clear_bam_transaction(snandc);
> >> + opcode = op->cmd.opcode;
> >> +
> >> + switch (opcode) {
> >> + case SPINAND_READID:
> >> + snandc->buf_count = 4;
> >> + qcom_read_reg_dma(snandc, NAND_READ_ID, 1, NAND_BAM_NEXT_SGL);
> >> + copy = true;
> >> + break;
> >> + case SPINAND_GET_FEATURE:
> >> + snandc->buf_count = 4;
> >> + qcom_read_reg_dma(snandc, NAND_FLASH_FEATURES, 1, NAND_BAM_NEXT_SGL);
> >> + copy_ftr = true;
> >> + break;
> >> + case SPINAND_SET_FEATURE:
> >> + snandc->regs->flash_feature = *(u32 *)op->data.buf.out;
> >> + qcom_write_reg_dma(snandc, &snandc->regs->flash_feature,
> >> + NAND_FLASH_FEATURES, 1, NAND_BAM_NEXT_SGL);
> >> + break;
> >> + default:
> >> + return 0;
> >
> > No error state?
> We can't return return error here , since this API is not for checking supported command.
I no longer remember exactly where this is called, but if there are
possible unhandled cases, I want an error to be returned.
> We can return error only if we submitted the descriptor. That already we are handling.
...
> >> --- a/include/linux/mtd/nand-qpic-common.h
> >> +++ b/include/linux/mtd/nand-qpic-common.h
> >> @@ -315,11 +315,56 @@ struct nandc_regs {
> >> __le32 read_location_last1;
> >> __le32 read_location_last2;
> >> __le32 read_location_last3;
> >> + __le32 spi_cfg;
> >> + __le32 num_addr_cycle;
> >> + __le32 busy_wait_cnt;
> >> + __le32 flash_feature;
> >> >> __le32 erased_cw_detect_cfg_clr;
> >> __le32 erased_cw_detect_cfg_set;
> >> };
> >> >> +/*
> >> + * ECC state struct
> >> + * @corrected: ECC corrected
> >> + * @bitflips: Max bit flip
> >> + * @failed: ECC failed
> >> + */
> >> +struct qcom_ecc_stats {
> >> + u32 corrected;
> >> + u32 bitflips;
> >> + u32 failed;
> >> +};
> >> +
> >> +struct qpic_ecc {
> >> + struct device *dev;
> >> + const struct qpic_ecc_caps *caps;
> >> + struct completion done;
> >> + u32 sectors;
> >> + u8 *eccdata;
> >> + bool use_ecc;
> >> + u32 ecc_modes;
> >> + int ecc_bytes_hw;
> >> + int spare_bytes;
> >> + int bbm_size;
> >> + int ecc_mode;
> >> + int bytes;
> >> + int steps;
> >> + int step_size;
> >> + int strength;
> >> + int cw_size;
> >> + int cw_data;
> >> + u32 cfg0, cfg1;
> >> + u32 cfg0_raw, cfg1_raw;
> >> + u32 ecc_buf_cfg;
> >> + u32 ecc_bch_cfg;
> >> + u32 clrflashstatus;
> >> + u32 clrreadstatus;
> >> + bool bch_enabled;
> >> +};
> >> +
> >> +struct qpic_ecc;
> >> +
> >> /*
> >> * NAND controller data struct
> >> *
> >> @@ -329,6 +374,7 @@ struct nandc_regs {
> >> *
> >> * @core_clk: controller clock
> >> * @aon_clk: another controller clock
> >> + * @iomacro_clk: io macro clock
> >> *
> >> * @regs: a contiguous chunk of memory for DMA register
> >> * writes. contains the register values to be
> >> @@ -338,6 +384,7 @@ struct nandc_regs {
> >> * initialized via DT match data
> >> *
> >> * @controller: base controller structure
> >> + * @ctlr: spi controller structure
> >> * @host_list: list containing all the chips attached to the
> >> * controller
> >> *
> >> @@ -375,6 +422,7 @@ struct qcom_nand_controller {
> >> >> struct clk *core_clk;
> >> struct clk *aon_clk;
> >> + struct clk *iomacro_clk;
> >> >> struct nandc_regs *regs;
> >> struct bam_transaction *bam_txn;
> >> @@ -382,6 +430,7 @@ struct qcom_nand_controller {
> >> const struct qcom_nandc_props *props;
> >> >> struct nand_controller controller;
> >> + struct spi_controller *ctlr;
> >> struct list_head host_list;
> >> >> union {
> >> @@ -418,6 +467,21 @@ struct qcom_nand_controller {
> >> >> u32 cmd1, vld;
> >> bool exec_opwrite;
> >> + struct qpic_ecc *ecc;
> >> + struct qcom_ecc_stats ecc_stats;
> >> + struct nand_ecc_engine ecc_eng;
> >> + u8 *data_buf;
> >> + u8 *oob_buf;
> >> + u32 wlen;
> >> + u32 addr1;
> >> + u32 addr2;
> >> + u32 cmd;
> >> + u32 num_cw;
> >> + u32 pagesize;
> >> + bool oob_rw;
> >> + bool page_rw;
> >> + bool raw_rw;
> >> + bool read_last_cw;
> >> };
> >
> > If all these definitions are only used by the spi controller, I don't
> > see why you want to put them in the common file.
> We are using qcom_nand_controller{..} structure as common b/w raw nand
> and spi nand. These all variables will be used by spi nand only , but
> qcom_nand_controller structure is passed across all the SPI API, thats
> why define these all variables inside qcom_nand_controller structure.
> so that i can access directlty.
Maybe you can move the spi-nand specific variables in a struct, and the
raw NAND specific variables in another, and then use an enum in this
structure. This way only the useful fields are available. Or maybe you
can have two pointers and only populate the relevant one from the
relevant driver with the fields that are missing. But this is a generic
include, so don't put specific fields there just because it is
convenient.
Thanks,
Miquèl
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: [PATCH v5 5/7] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface
2024-05-20 12:43 ` Miquel Raynal
@ 2024-05-20 15:25 ` Md Sadre Alam
0 siblings, 0 replies; 16+ messages in thread
From: Md Sadre Alam @ 2024-05-20 15:25 UTC (permalink / raw)
To: Miquel Raynal
Cc: broonie, robh, krzk+dt, conor+dt, andersson, konrad.dybcio,
richard, vigneshr, manivannan.sadhasivam, linux-arm-msm,
linux-spi, devicetree, linux-kernel, linux-mtd, quic_srichara,
quic_varada, Alexandru Gagniuc
On 5/20/2024 6:13 PM, Miquel Raynal wrote:
> Hi,
>
>>>> +static int qcom_spi_io_op(struct qcom_nand_controller *snandc, const struct spi_mem_op *op)
>>>> +{
>>>> + int ret, val, opcode;
>>>> + bool copy = false, copy_ftr = false;
>>>> +
>>>> + ret = qcom_spi_send_cmdaddr(snandc, op);
>>>> + if (ret)
>>>> + return ret;
>>>> +
>>>> + snandc->buf_count = 0;
>>>> + snandc->buf_start = 0;
>>>> + qcom_clear_read_regs(snandc);
>>>> + qcom_clear_bam_transaction(snandc);
>>>> + opcode = op->cmd.opcode;
>>>> +
>>>> + switch (opcode) {
>>>> + case SPINAND_READID:
>>>> + snandc->buf_count = 4;
>>>> + qcom_read_reg_dma(snandc, NAND_READ_ID, 1, NAND_BAM_NEXT_SGL);
>>>> + copy = true;
>>>> + break;
>>>> + case SPINAND_GET_FEATURE:
>>>> + snandc->buf_count = 4;
>>>> + qcom_read_reg_dma(snandc, NAND_FLASH_FEATURES, 1, NAND_BAM_NEXT_SGL);
>>>> + copy_ftr = true;
>>>> + break;
>>>> + case SPINAND_SET_FEATURE:
>>>> + snandc->regs->flash_feature = *(u32 *)op->data.buf.out;
>>>> + qcom_write_reg_dma(snandc, &snandc->regs->flash_feature,
>>>> + NAND_FLASH_FEATURES, 1, NAND_BAM_NEXT_SGL);
>>>> + break;
>>>> + default:
>>>> + return 0;
>>>
>>> No error state?
>> We can't return return error here , since this API is not for checking supported command.
>
> I no longer remember exactly where this is called, but if there are
> possible unhandled cases, I want an error to be returned.
Ok
>
>> We can return error only if we submitted the descriptor. That already we are handling.
>
> ...
>
>>>> --- a/include/linux/mtd/nand-qpic-common.h
>>>> +++ b/include/linux/mtd/nand-qpic-common.h
>>>> @@ -315,11 +315,56 @@ struct nandc_regs {
>>>> __le32 read_location_last1;
>>>> __le32 read_location_last2;
>>>> __le32 read_location_last3;
>>>> + __le32 spi_cfg;
>>>> + __le32 num_addr_cycle;
>>>> + __le32 busy_wait_cnt;
>>>> + __le32 flash_feature;
>>>> >> __le32 erased_cw_detect_cfg_clr;
>>>> __le32 erased_cw_detect_cfg_set;
>>>> };
>>>> >> +/*
>>>> + * ECC state struct
>>>> + * @corrected: ECC corrected
>>>> + * @bitflips: Max bit flip
>>>> + * @failed: ECC failed
>>>> + */
>>>> +struct qcom_ecc_stats {
>>>> + u32 corrected;
>>>> + u32 bitflips;
>>>> + u32 failed;
>>>> +};
>>>> +
>>>> +struct qpic_ecc {
>>>> + struct device *dev;
>>>> + const struct qpic_ecc_caps *caps;
>>>> + struct completion done;
>>>> + u32 sectors;
>>>> + u8 *eccdata;
>>>> + bool use_ecc;
>>>> + u32 ecc_modes;
>>>> + int ecc_bytes_hw;
>>>> + int spare_bytes;
>>>> + int bbm_size;
>>>> + int ecc_mode;
>>>> + int bytes;
>>>> + int steps;
>>>> + int step_size;
>>>> + int strength;
>>>> + int cw_size;
>>>> + int cw_data;
>>>> + u32 cfg0, cfg1;
>>>> + u32 cfg0_raw, cfg1_raw;
>>>> + u32 ecc_buf_cfg;
>>>> + u32 ecc_bch_cfg;
>>>> + u32 clrflashstatus;
>>>> + u32 clrreadstatus;
>>>> + bool bch_enabled;
>>>> +};
>>>> +
>>>> +struct qpic_ecc;
>>>> +
>>>> /*
>>>> * NAND controller data struct
>>>> *
>>>> @@ -329,6 +374,7 @@ struct nandc_regs {
>>>> *
>>>> * @core_clk: controller clock
>>>> * @aon_clk: another controller clock
>>>> + * @iomacro_clk: io macro clock
>>>> *
>>>> * @regs: a contiguous chunk of memory for DMA register
>>>> * writes. contains the register values to be
>>>> @@ -338,6 +384,7 @@ struct nandc_regs {
>>>> * initialized via DT match data
>>>> *
>>>> * @controller: base controller structure
>>>> + * @ctlr: spi controller structure
>>>> * @host_list: list containing all the chips attached to the
>>>> * controller
>>>> *
>>>> @@ -375,6 +422,7 @@ struct qcom_nand_controller {
>>>> >> struct clk *core_clk;
>>>> struct clk *aon_clk;
>>>> + struct clk *iomacro_clk;
>>>> >> struct nandc_regs *regs;
>>>> struct bam_transaction *bam_txn;
>>>> @@ -382,6 +430,7 @@ struct qcom_nand_controller {
>>>> const struct qcom_nandc_props *props;
>>>> >> struct nand_controller controller;
>>>> + struct spi_controller *ctlr;
>>>> struct list_head host_list;
>>>> >> union {
>>>> @@ -418,6 +467,21 @@ struct qcom_nand_controller {
>>>> >> u32 cmd1, vld;
>>>> bool exec_opwrite;
>>>> + struct qpic_ecc *ecc;
>>>> + struct qcom_ecc_stats ecc_stats;
>>>> + struct nand_ecc_engine ecc_eng;
>>>> + u8 *data_buf;
>>>> + u8 *oob_buf;
>>>> + u32 wlen;
>>>> + u32 addr1;
>>>> + u32 addr2;
>>>> + u32 cmd;
>>>> + u32 num_cw;
>>>> + u32 pagesize;
>>>> + bool oob_rw;
>>>> + bool page_rw;
>>>> + bool raw_rw;
>>>> + bool read_last_cw;
>>>> };
>>>
>>> If all these definitions are only used by the spi controller, I don't
>>> see why you want to put them in the common file.
>> We are using qcom_nand_controller{..} structure as common b/w raw nand
>> and spi nand. These all variables will be used by spi nand only , but
>> qcom_nand_controller structure is passed across all the SPI API, thats
>> why define these all variables inside qcom_nand_controller structure.
>> so that i can access directlty.
>
> Maybe you can move the spi-nand specific variables in a struct, and the
> raw NAND specific variables in another, and then use an enum in this
> structure. This way only the useful fields are available. Or maybe you
> can have two pointers and only populate the relevant one from the
> relevant driver with the fields that are missing. But this is a generic
> include, so don't put specific fields there just because it is
> convenient.
Ok , will do in next patch.
>
> Thanks,
> Miquèl
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH v5 6/7] arm64: dts: qcom: ipq9574: Add SPI nand support
2024-05-08 8:36 [PATCH v5 0/7] Add QPIC SPI NAND driver Md Sadre Alam
` (4 preceding siblings ...)
2024-05-08 8:36 ` [PATCH v5 5/7] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface Md Sadre Alam
@ 2024-05-08 8:36 ` Md Sadre Alam
2024-05-08 8:36 ` [PATCH v5 7/7] arm64: dts: qcom: ipq9574: Disable eMMC node Md Sadre Alam
6 siblings, 0 replies; 16+ messages in thread
From: Md Sadre Alam @ 2024-05-08 8:36 UTC (permalink / raw)
To: broonie, robh, krzk+dt, conor+dt, andersson, konrad.dybcio,
miquel.raynal, richard, vigneshr, manivannan.sadhasivam,
linux-arm-msm, linux-spi, devicetree, linux-kernel, linux-mtd
Cc: quic_srichara, quic_varada, quic_mdalam, Alexandru Gagniuc
Add SPI NAND support for ipq9574 SoC.
Tested-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
---
Change in [v5]
* No change
Change in [v4]
* No change
Change in [v3]
* Updated gpio number as per pin control driver
* Fixed alignment issue
Change in [v2]
* Added initial enablement for spi-nand
Change in [v1]
* Posted as RFC patch for design review
.../boot/dts/qcom/ipq9574-rdp-common.dtsi | 43 +++++++++++++++++++
arch/arm64/boot/dts/qcom/ipq9574.dtsi | 27 ++++++++++++
2 files changed, 70 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
index 91e104b0f865..6429a6b3b903 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
@@ -139,6 +139,49 @@ gpio_leds_default: gpio-leds-default-state {
drive-strength = <8>;
bias-pull-up;
};
+
+ qpic_snand_default_state: qpic-snand-default-state {
+ clock-pins {
+ pins = "gpio5";
+ function = "qspi_clk";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ cs-pins {
+ pins = "gpio4";
+ function = "qspi_cs";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ data-pins {
+ pins = "gpio0", "gpio1", "gpio2", "gpio3";
+ function = "qspi_data";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&qpic_nand {
+ pinctrl-0 = <&qpic_snand_default_state>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ flash@0 {
+ compatible = "spi-nand";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ nand-ecc-engine = <&qpic_nand>;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ };
};
&usb_0_dwc3 {
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 7f2e5cbf3bbb..786bb3540d6c 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -319,6 +319,33 @@ tcsr: syscon@1937000 {
reg = <0x01937000 0x21000>;
};
+ qpic_bam: dma-controller@7984000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x7984000 0x1c000>;
+ interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QPIC_AHB_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ status = "disabled";
+ };
+
+ qpic_nand: spi@79b0000 {
+ compatible = "qcom,spi-qpic-snand";
+ reg = <0x79b0000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&gcc GCC_QPIC_CLK>,
+ <&gcc GCC_QPIC_AHB_CLK>,
+ <&gcc GCC_QPIC_IO_MACRO_CLK>;
+ clock-names = "core", "aon", "iom";
+ dmas = <&qpic_bam 0>,
+ <&qpic_bam 1>,
+ <&qpic_bam 2>;
+ dma-names = "tx", "rx", "cmd";
+ status = "disabled";
+ };
+
sdhc_1: mmc@7804000 {
compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5";
reg = <0x07804000 0x1000>,
--
2.34.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v5 7/7] arm64: dts: qcom: ipq9574: Disable eMMC node
2024-05-08 8:36 [PATCH v5 0/7] Add QPIC SPI NAND driver Md Sadre Alam
` (5 preceding siblings ...)
2024-05-08 8:36 ` [PATCH v5 6/7] arm64: dts: qcom: ipq9574: Add SPI nand support Md Sadre Alam
@ 2024-05-08 8:36 ` Md Sadre Alam
2024-05-16 12:59 ` Miquel Raynal
6 siblings, 1 reply; 16+ messages in thread
From: Md Sadre Alam @ 2024-05-08 8:36 UTC (permalink / raw)
To: broonie, robh, krzk+dt, conor+dt, andersson, konrad.dybcio,
miquel.raynal, richard, vigneshr, manivannan.sadhasivam,
linux-arm-msm, linux-spi, devicetree, linux-kernel, linux-mtd
Cc: quic_srichara, quic_varada, quic_mdalam, Alexandru Gagniuc
Disable eMMC node
Tested-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
---
Change in [v5]
* No Change
Change in [v4]
* No change
Change in [v3]
* Removed co-developed by
Change in [v2]
* Posted as initial eMMC disable patch
Change in [v1]
* This patch was not included in v1
arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
index 1bb8d96c9a82..e33e7fafd695 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
@@ -24,7 +24,7 @@ &sdhc_1 {
mmc-hs400-enhanced-strobe;
max-frequency = <384000000>;
bus-width = <8>;
- status = "okay";
+ status = "disabled";
};
&tlmm {
--
2.34.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* Re: [PATCH v5 7/7] arm64: dts: qcom: ipq9574: Disable eMMC node
2024-05-08 8:36 ` [PATCH v5 7/7] arm64: dts: qcom: ipq9574: Disable eMMC node Md Sadre Alam
@ 2024-05-16 12:59 ` Miquel Raynal
2024-05-20 10:15 ` Md Sadre Alam
0 siblings, 1 reply; 16+ messages in thread
From: Miquel Raynal @ 2024-05-16 12:59 UTC (permalink / raw)
To: Md Sadre Alam
Cc: broonie, robh, krzk+dt, conor+dt, andersson, konrad.dybcio,
richard, vigneshr, manivannan.sadhasivam, linux-arm-msm,
linux-spi, devicetree, linux-kernel, linux-mtd, quic_srichara,
quic_varada, Alexandru Gagniuc
Hi,
quic_mdalam@quicinc.com wrote on Wed, 8 May 2024 14:06:37 +0530:
> Disable eMMC node
Please explain why or remove this patch from this series, because at a
first glance there is no reason to link this patch with the others.
Thanks,
Miquèl
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH v5 7/7] arm64: dts: qcom: ipq9574: Disable eMMC node
2024-05-16 12:59 ` Miquel Raynal
@ 2024-05-20 10:15 ` Md Sadre Alam
0 siblings, 0 replies; 16+ messages in thread
From: Md Sadre Alam @ 2024-05-20 10:15 UTC (permalink / raw)
To: Miquel Raynal
Cc: broonie, robh, krzk+dt, conor+dt, andersson, konrad.dybcio,
richard, vigneshr, manivannan.sadhasivam, linux-arm-msm,
linux-spi, devicetree, linux-kernel, linux-mtd, quic_srichara,
quic_varada, Alexandru Gagniuc
On 5/16/2024 6:29 PM, Miquel Raynal wrote:
> Hi,
>
> quic_mdalam@quicinc.com wrote on Wed, 8 May 2024 14:06:37 +0530:
>
>> Disable eMMC node
>
> Please explain why or remove this patch from this series, because at a
> first glance there is no reason to link this patch with the others.
rdp433 default boot mode is norplusnand and GPIOs are shared b/w eMMC
and NAND so we can't keep both.So we are disabling the eMMC for rdp433.
>
> Thanks,
> Miquèl
^ permalink raw reply [flat|nested] 16+ messages in thread