[PATCH] spi: dt-bindings: marvell,mmp2-ssp: Merge PXA SSP into schema

["Rob Herring (Arm)" <robh@kernel.org>]

The Marvell PXA SSP block is the same or similiar to the MMP2 variant.
The only difference in the binding is the PXA version supports DMA (and
that's probably a binding difference rather than an actual h/w
difference).

The old binding didn't belong under 'serial' as it is not a UART. The
SSP block also supports audio devices, so 'spi' is not a perfect fit
either. As the existing schema for MMP2 is there, just leave things
as-is.

The examples in the old text binding were pretty out of sync with
reality. 'clock-names' and 'ssp-id' aren't documented nor used.

Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 .../bindings/serial/mrvl,pxa-ssp.txt          | 64 -------------------
 .../bindings/spi/marvell,mmp2-ssp.yaml        | 35 ++++++++--
 2 files changed, 31 insertions(+), 68 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/serial/mrvl,pxa-ssp.txt

diff --git a/Documentation/devicetree/bindings/serial/mrvl,pxa-ssp.txt b/Documentation/devicetree/bindings/serial/mrvl,pxa-ssp.txt
deleted file mode 100644
index d10cc06c0c37..000000000000
--- a/Documentation/devicetree/bindings/serial/mrvl,pxa-ssp.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-Device tree bindings for Marvell PXA SSP ports
-
-Required properties:
-
-	- compatible:	Must be one of
-				mrvl,pxa25x-ssp
-				mvrl,pxa25x-nssp
-				mrvl,pxa27x-ssp
-				mrvl,pxa3xx-ssp
-				mvrl,pxa168-ssp
-				mrvl,pxa910-ssp
-				mrvl,ce4100-ssp
-
-	- reg:		The memory base
-	- dmas:		Two dma phandles, one for rx, one for tx
-	- dma-names:	Must be "rx", "tx"
-
-
-Example for PXA3xx:
-
-	ssp0: ssp@41000000 {
-		compatible = "mrvl,pxa3xx-ssp";
-		reg = <0x41000000 0x40>;
-		ssp-id = <1>;
-		interrupts = <24>;
-		clock-names = "pxa27x-ssp.0";
-		dmas = <&dma 13
-			&dma 14>;
-		dma-names = "rx", "tx";
-	};
-
-	ssp1: ssp@41700000 {
-		compatible = "mrvl,pxa3xx-ssp";
-		reg = <0x41700000 0x40>;
-		ssp-id = <2>;
-		interrupts = <16>;
-		clock-names = "pxa27x-ssp.1";
-		dmas = <&dma 15
-			&dma 16>;
-		dma-names = "rx", "tx";
-	};
-
-	ssp2: ssp@41900000 {
-		compatibl3 = "mrvl,pxa3xx-ssp";
-		reg = <0x41900000 0x40>;
-		ssp-id = <3>;
-		interrupts = <0>;
-		clock-names = "pxa27x-ssp.2";
-		dmas = <&dma 66
-			&dma 67>;
-		dma-names = "rx", "tx";
-	};
-
-	ssp3: ssp@41a00000 {
-		compatible = "mrvl,pxa3xx-ssp";
-		reg = <0x41a00000 0x40>;
-		ssp-id = <4>;
-		interrupts = <13>;
-		clock-names = "pxa27x-ssp.3";
-		dmas = <&dma 2
-			&dma 3>;
-		dma-names = "rx", "tx";
-	};
-
diff --git a/Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml b/Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml
index 5f4f6b5615d0..0a1bada8f800 100644
--- a/Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml
+++ b/Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml
@@ -10,12 +10,17 @@ title: PXA2xx SSP SPI Controller
 maintainers:
   - Lubomir Rintel <lkundrak@v3.sk>
 
-allOf:
-  - $ref: spi-controller.yaml#
-
 properties:
   compatible:
-    const: marvell,mmp2-ssp
+    enum:
+      - marvell,mmp2-ssp
+      - mrvl,ce4100-ssp
+      - mvrl,pxa168-ssp
+      - mrvl,pxa25x-ssp
+      - mvrl,pxa25x-nssp
+      - mrvl,pxa27x-ssp
+      - mrvl,pxa3xx-ssp
+      - mrvl,pxa910-ssp
 
   interrupts:
     maxItems: 1
@@ -26,6 +31,16 @@ properties:
   clocks:
     maxItems: 1
 
+  dmas:
+    items:
+      - description: Receive DMA
+      - description: Transmit DMA
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
   ready-gpios:
     description: |
       GPIO used to signal a SPI master that the FIFO is filled and we're
@@ -41,6 +56,18 @@ required:
 dependencies:
   ready-gpios: [ spi-slave ]
 
+allOf:
+  - $ref: spi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: marvell,mmp2-ssp
+    then:
+      properties:
+        dmas: false
+        dma-names: false
+
 unevaluatedProperties: false
 
 examples:
-- 
2.43.0