linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Witold Sadowski <wsadowski@marvell.com>
To: <linux-kernel@vger.kernel.org>, <linux-spi@vger.kernel.org>,
	<devicetree@vger.kernel.org>
Cc: <broonie@kernel.org>, <robh@kernel.org>,
	<krzysztof.kozlowski+dt@linaro.org>, <conor+dt@kernel.org>,
	<pthombar@cadence.com>, Witold Sadowski <wsadowski@marvell.com>
Subject: [PATCH v7 1/4] spi: dt-bindings: cadence: Add Marvell overlay bindings documentation for Cadence XSPI
Date: Wed, 29 May 2024 15:00:23 -0700	[thread overview]
Message-ID: <20240529220026.1644986-2-wsadowski@marvell.com> (raw)
In-Reply-To: <20240529220026.1644986-1-wsadowski@marvell.com>

Add new bindings for the v2 Marvell xSPI overlay: marvell,cn10-xspi-nor
compatible string. This new compatible string distinguishes between the
original and modified xSPI block.

Also add an optional base for the xfer register set with an additional
reg field to allocate the xSPI Marvell overlay XFER block.

Signed-off-by: Witold Sadowski <wsadowski@marvell.com>
---
 .../devicetree/bindings/spi/cdns,xspi.yaml    | 32 ++++++++++++++++---
 1 file changed, 28 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/spi/cdns,xspi.yaml b/Documentation/devicetree/bindings/spi/cdns,xspi.yaml
index eb0f92468185..49c6a2c82fc4 100644
--- a/Documentation/devicetree/bindings/spi/cdns,xspi.yaml
+++ b/Documentation/devicetree/bindings/spi/cdns,xspi.yaml
@@ -15,24 +15,27 @@ description: |
   single, dual, quad or octal wire transmission modes for
   read/write access to slaves such as SPI-NOR flash.
 
-allOf:
-  - $ref: spi-controller.yaml#
-
 properties:
   compatible:
-    const: cdns,xspi-nor
+    enum:
+      - cdns,xspi-nor
+      - marvell,cn10-xspi-nor
 
   reg:
     items:
       - description: address and length of the controller register set
       - description: address and length of the Slave DMA data port
       - description: address and length of the auxiliary registers
+      - description: address and length of the xfer registers
+    minItems: 3
 
   reg-names:
     items:
       - const: io
       - const: sdma
       - const: aux
+      - const: xferbase
+    minItems: 3
 
   interrupts:
     maxItems: 1
@@ -42,6 +45,27 @@ required:
   - reg
   - interrupts
 
+allOf:
+  - $ref: spi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - marvell,cn10-xspi-nor
+    then:
+      properties:
+        reg:
+          minItems: 4
+        reg-names:
+          minItems: 4
+    else:
+      properties:
+        reg:
+          maxItems: 3
+        reg-names:
+          maxItems: 3
+
 unevaluatedProperties: false
 
 examples:
-- 
2.43.0


  reply	other threads:[~2024-05-29 22:00 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-05-29 22:00 [PATCH v7 0/4] Marvell HW overlay support for Cadence xSPI Witold Sadowski
2024-05-29 22:00 ` Witold Sadowski [this message]
2024-05-31  1:47   ` [PATCH v7 1/4] spi: dt-bindings: cadence: Add Marvell overlay bindings documentation for Cadence XSPI Rob Herring
2024-06-07 15:12     ` [EXTERNAL] " Witold Sadowski
2024-05-31  8:16   ` Krzysztof Kozlowski
2024-05-29 22:00 ` [PATCH v7 2/4] spi: cadence: Add Marvell xSPI IP overlay changes Witold Sadowski
2024-05-30 19:38   ` kernel test robot
2024-06-04  9:18   ` Dan Carpenter
2024-06-07 15:14     ` [EXTERNAL] " Witold Sadowski
2024-05-29 22:00 ` [PATCH v7 3/4] spi: cadence: Allow to read basic xSPI configuration from ACPI Witold Sadowski
2024-05-29 22:00 ` [PATCH v7 4/4] spi: cadence: Add MRVL overlay xfer operation support Witold Sadowski
2024-06-04  9:21   ` Dan Carpenter
2024-06-07 15:15     ` [EXTERNAL] " Witold Sadowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240529220026.1644986-2-wsadowski@marvell.com \
    --to=wsadowski@marvell.com \
    --cc=broonie@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=pthombar@cadence.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).