From: Eddie James <eajames@linux.ibm.com>
To: linux-fsi@lists.ozlabs.org
Cc: eajames@linux.ibm.com, linux-kernel@vger.kernel.org,
linux-i2c@vger.kernel.org, linux-spi@vger.kernel.org,
broonie@kernel.org, andi.shyti@kernel.org, joel@jms.id.au,
alistair@popple.id.au, jk@ozlabs.org,
andrew@codeconstruct.com.au, linux-aspeed@lists.ozlabs.org,
ninad@linux.ibm.com, lakshmiy@us.ibm.com
Subject: [PATCH v4 20/40] fsi: aspeed: Switch to spinlock
Date: Wed, 5 Jun 2024 16:22:52 -0500 [thread overview]
Message-ID: <20240605212312.349188-21-eajames@linux.ibm.com> (raw)
In-Reply-To: <20240605212312.349188-1-eajames@linux.ibm.com>
In preparation for interrupt support, switch to a spinlock rather
than a mutex.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
drivers/fsi/fsi-master-aspeed.c | 25 ++++++++++++++-----------
1 file changed, 14 insertions(+), 11 deletions(-)
diff --git a/drivers/fsi/fsi-master-aspeed.c b/drivers/fsi/fsi-master-aspeed.c
index 10ca23cf58c2e..176e596b4391b 100644
--- a/drivers/fsi/fsi-master-aspeed.c
+++ b/drivers/fsi/fsi-master-aspeed.c
@@ -8,11 +8,11 @@
#include <linux/io.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
-#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/slab.h>
+#include <linux/spinlock.h>
#include <linux/iopoll.h>
#include <linux/gpio/consumer.h>
@@ -24,7 +24,7 @@ struct fsi_master_aspeed_data {
struct fsi_master_aspeed {
struct fsi_master master;
- struct mutex lock; /* protect HW access */
+ spinlock_t lock; /* protect HW access */
struct device *dev;
void __iomem *base;
void __iomem *ctrl;
@@ -251,6 +251,7 @@ static int aspeed_master_read(struct fsi_master *master, int link,
uint8_t id, uint32_t addr, void *val, size_t size)
{
struct fsi_master_aspeed *aspeed = to_fsi_master_aspeed(master);
+ unsigned long flags;
int ret;
if (id > 0x3)
@@ -259,7 +260,7 @@ static int aspeed_master_read(struct fsi_master *master, int link,
addr |= id << 21;
addr += link * FSI_HUB_LINK_SIZE;
- mutex_lock(&aspeed->lock);
+ spin_lock_irqsave(&aspeed->lock, flags);
switch (size) {
case 1:
@@ -278,7 +279,7 @@ static int aspeed_master_read(struct fsi_master *master, int link,
ret = check_errors(aspeed, ret);
done:
- mutex_unlock(&aspeed->lock);
+ spin_unlock_irqrestore(&aspeed->lock, flags);
return ret;
}
@@ -286,6 +287,7 @@ static int aspeed_master_write(struct fsi_master *master, int link,
uint8_t id, uint32_t addr, const void *val, size_t size)
{
struct fsi_master_aspeed *aspeed = to_fsi_master_aspeed(master);
+ unsigned long flags;
int ret;
if (id > 0x3)
@@ -294,7 +296,7 @@ static int aspeed_master_write(struct fsi_master *master, int link,
addr |= id << 21;
addr += link * FSI_HUB_LINK_SIZE;
- mutex_lock(&aspeed->lock);
+ spin_lock_irqsave(&aspeed->lock, flags);
switch (size) {
case 1:
@@ -313,7 +315,7 @@ static int aspeed_master_write(struct fsi_master *master, int link,
ret = check_errors(aspeed, ret);
done:
- mutex_unlock(&aspeed->lock);
+ spin_unlock_irqrestore(&aspeed->lock, flags);
return ret;
}
@@ -396,15 +398,16 @@ static ssize_t cfam_reset_store(struct device *dev, struct device_attribute *att
const char *buf, size_t count)
{
struct fsi_master_aspeed *aspeed = dev_get_drvdata(dev);
+ unsigned long flags;
trace_fsi_master_aspeed_cfam_reset(true);
- mutex_lock(&aspeed->lock);
+ spin_lock_irqsave(&aspeed->lock, flags);
gpiod_set_value(aspeed->cfam_reset_gpio, 1);
- usleep_range(900, 1000);
+ udelay(900);
gpiod_set_value(aspeed->cfam_reset_gpio, 0);
- usleep_range(900, 1000);
+ udelay(900);
regmap_write(aspeed->master.map, FSI_MRESP0, FSI_MRESP_RST_ALL_MASTER);
- mutex_unlock(&aspeed->lock);
+ spin_unlock_irqrestore(&aspeed->lock, flags);
trace_fsi_master_aspeed_cfam_reset(false);
return count;
@@ -498,6 +501,7 @@ static int fsi_master_aspeed_probe(struct platform_device *pdev)
return -ENOMEM;
aspeed->dev = &pdev->dev;
+ spin_lock_init(&aspeed->lock);
aspeed->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(aspeed->base)) {
@@ -583,7 +587,6 @@ static int fsi_master_aspeed_probe(struct platform_device *pdev)
dev_set_drvdata(&pdev->dev, aspeed);
- mutex_init(&aspeed->lock);
rc = fsi_master_init(&aspeed->master, clk_get_rate(aspeed->clk));
if (rc)
goto err_regmap;
--
2.39.3
next prev parent reply other threads:[~2024-06-05 21:23 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-05 21:22 [PATCH v4 00/40] fsi: Add interrupt support Eddie James
2024-06-05 21:22 ` [PATCH v4 01/40] fsi: hub: Set master index to link number plus one Eddie James
2024-06-05 21:22 ` [PATCH v4 02/40] fsi: Move slave definitions to fsi-slave.h Eddie James
2024-06-05 21:22 ` [PATCH v4 03/40] fsi: Fix slave addressing after break command Eddie James
2024-06-05 21:22 ` [PATCH v4 04/40] fsi: Use a defined value for default echo delay Eddie James
2024-06-05 21:22 ` [PATCH v4 05/40] fsi: Calculate local bus clock frequency Eddie James
2024-06-05 21:22 ` [PATCH v4 06/40] fsi: core: Improve master read/write/error traces Eddie James
2024-06-05 21:22 ` [PATCH v4 07/40] fsi: core: Add slave error trace Eddie James
2024-06-05 21:22 ` [PATCH v4 08/40] fsi: core: Reset errors instead of clearing interrupts Eddie James
2024-06-05 21:22 ` [PATCH v4 09/40] fsi: aspeed: Add AST2700 support Eddie James
2024-06-05 21:22 ` [PATCH v4 10/40] fsi: core: Add slave spinlock Eddie James
2024-06-05 21:22 ` [PATCH v4 11/40] fsi: core: Allow cfam device type aliases Eddie James
2024-06-05 21:22 ` [PATCH v4 12/40] fsi: core: Add common regmap master functions Eddie James
2024-06-05 21:22 ` [PATCH v4 13/40] fsi: core: Disable relative addressing during scan Eddie James
2024-06-05 21:22 ` [PATCH v4 14/40] fsi: hub: Use common initialization and link enable Eddie James
2024-06-05 21:22 ` [PATCH v4 15/40] fsi: aspeed: " Eddie James
2024-06-05 21:22 ` [PATCH v4 16/40] fsi: aspeed: Remove cfam reset sysfs file in error path and remove Eddie James
2024-06-05 21:22 ` [PATCH v4 17/40] fsi: aspeed: Refactor trace functions Eddie James
2024-06-05 21:22 ` [PATCH v4 18/40] fsi: aspeed: Don't clear all IRQs during OPB transfers Eddie James
2024-06-05 21:22 ` [PATCH v4 19/40] fsi: aspeed: Only read result register for successful read Eddie James
2024-06-05 21:22 ` Eddie James [this message]
2024-06-05 21:22 ` [PATCH v4 21/40] fsi: aspeed: Disable relative addressing and IPOLL for cfam reset Eddie James
2024-06-05 21:22 ` [PATCH v4 22/40] fsi: aspeed: Use common master error handler Eddie James
2024-06-05 21:22 ` [PATCH v4 23/40] fsi: core: Add interrupt support Eddie James
2024-06-05 21:22 ` [PATCH v4 24/40] fsi: aspeed: " Eddie James
2024-06-05 21:22 ` [PATCH v4 25/40] fsi: hub: " Eddie James
2024-06-05 21:22 ` [PATCH v4 26/40] i2c: fsi: Calculate clock divider from local bus frequency Eddie James
2024-06-05 21:22 ` [PATCH v4 27/40] i2c: fsi: Improve formatting Eddie James
2024-06-05 21:23 ` [PATCH v4 28/40] i2c: fsi: Change fsi_i2c_write_reg to accept data instead of a pointer Eddie James
2024-06-05 21:23 ` [PATCH v4 29/40] i2c: fsi: Remove list structure of ports Eddie James
2024-06-05 21:23 ` [PATCH v4 30/40] i2c: fsi: Define a function to check status error bits Eddie James
2024-06-05 21:23 ` [PATCH v4 31/40] i2c: fsi: Add boolean for skip stop command on abort Eddie James
2024-06-05 21:23 ` [PATCH v4 32/40] i2c: fsi: Add interrupt support Eddie James
2024-06-05 21:23 ` [PATCH v4 33/40] fsi: hub master: Reset hub master after errors Eddie James
2024-06-05 21:23 ` [PATCH v4 34/40] fsi: core: Add master register read-only sysfs Eddie James
2024-06-05 21:23 ` [PATCH v4 35/40] fsi: core: Add slave " Eddie James
2024-06-05 21:23 ` [PATCH v4 36/40] fsi: i2cr: Adjust virtual CFAM ID to match Odyssey chip Eddie James
2024-06-05 21:23 ` [PATCH v4 37/40] fsi: core: Add different types of CFAM Eddie James
2024-06-05 21:23 ` [PATCH v4 38/40] spi: fsi: Calculate clock divider from local bus frequency Eddie James
2024-06-05 21:23 ` [PATCH v4 39/40] ARM: dts: aspeed: P10 and tacoma: Set FSI clock frequency Eddie James
2024-06-05 21:23 ` [PATCH v4 40/40] ARM: dts: aspeed: P10: Bump SPI max frequencies Eddie James
2024-06-06 1:02 ` [PATCH v4 00/40] fsi: Add interrupt support Andrew Jeffery
2024-07-01 15:29 ` Eddie James
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240605212312.349188-21-eajames@linux.ibm.com \
--to=eajames@linux.ibm.com \
--cc=alistair@popple.id.au \
--cc=andi.shyti@kernel.org \
--cc=andrew@codeconstruct.com.au \
--cc=broonie@kernel.org \
--cc=jk@ozlabs.org \
--cc=joel@jms.id.au \
--cc=lakshmiy@us.ibm.com \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-fsi@lists.ozlabs.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=ninad@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).