From: Eddie James <eajames@linux.ibm.com>
To: linux-fsi@lists.ozlabs.org
Cc: eajames@linux.ibm.com, linux-kernel@vger.kernel.org,
linux-i2c@vger.kernel.org, linux-spi@vger.kernel.org,
broonie@kernel.org, andi.shyti@kernel.org, joel@jms.id.au,
alistair@popple.id.au, jk@ozlabs.org,
andrew@codeconstruct.com.au, linux-aspeed@lists.ozlabs.org,
ninad@linux.ibm.com, lakshmiy@us.ibm.com
Subject: [PATCH v4 40/40] ARM: dts: aspeed: P10: Bump SPI max frequencies
Date: Wed, 5 Jun 2024 16:23:12 -0500 [thread overview]
Message-ID: <20240605212312.349188-41-eajames@linux.ibm.com> (raw)
In-Reply-To: <20240605212312.349188-1-eajames@linux.ibm.com>
These parts support 10MHZ.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
.../dts/aspeed/aspeed-bmc-ibm-everest.dts | 32 +++++++++----------
.../arm/boot/dts/aspeed/ibm-power10-dual.dtsi | 16 +++++-----
.../arm/boot/dts/aspeed/ibm-power10-quad.dtsi | 16 +++++-----
3 files changed, 32 insertions(+), 32 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
index 214b2e6a4c6df..1365dc95f1352 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
@@ -2797,7 +2797,7 @@ eeprom@0 {
compatible = "atmel,at25";
reg = <0>;
- spi-max-frequency = <1000000>;
+ spi-max-frequency = <10000000>;
};
};
@@ -2813,7 +2813,7 @@ eeprom@0 {
compatible = "atmel,at25";
reg = <0>;
- spi-max-frequency = <1000000>;
+ spi-max-frequency = <10000000>;
};
};
@@ -2830,7 +2830,7 @@ eeprom@0 {
compatible = "atmel,at25";
reg = <0>;
- spi-max-frequency = <1000000>;
+ spi-max-frequency = <10000000>;
};
};
@@ -2847,7 +2847,7 @@ eeprom@0 {
compatible = "atmel,at25";
reg = <0>;
- spi-max-frequency = <1000000>;
+ spi-max-frequency = <10000000>;
};
};
};
@@ -3170,7 +3170,7 @@ eeprom@0 {
compatible = "atmel,at25";
reg = <0>;
- spi-max-frequency = <1000000>;
+ spi-max-frequency = <10000000>;
};
};
@@ -3186,7 +3186,7 @@ eeprom@0 {
compatible = "atmel,at25";
reg = <0>;
- spi-max-frequency = <1000000>;
+ spi-max-frequency = <10000000>;
};
};
@@ -3203,7 +3203,7 @@ eeprom@0 {
compatible = "atmel,at25";
reg = <0>;
- spi-max-frequency = <1000000>;
+ spi-max-frequency = <10000000>;
};
};
@@ -3220,7 +3220,7 @@ eeprom@0 {
compatible = "atmel,at25";
reg = <0>;
- spi-max-frequency = <1000000>;
+ spi-max-frequency = <10000000>;
};
};
};
@@ -3543,7 +3543,7 @@ eeprom@0 {
compatible = "atmel,at25";
reg = <0>;
- spi-max-frequency = <1000000>;
+ spi-max-frequency = <10000000>;
};
};
@@ -3559,7 +3559,7 @@ eeprom@0 {
compatible = "atmel,at25";
reg = <0>;
- spi-max-frequency = <1000000>;
+ spi-max-frequency = <10000000>;
};
};
@@ -3576,7 +3576,7 @@ eeprom@0 {
compatible = "atmel,at25";
reg = <0>;
- spi-max-frequency = <1000000>;
+ spi-max-frequency = <10000000>;
};
};
@@ -3593,7 +3593,7 @@ eeprom@0 {
compatible = "atmel,at25";
reg = <0>;
- spi-max-frequency = <1000000>;
+ spi-max-frequency = <10000000>;
};
};
};
@@ -3916,7 +3916,7 @@ eeprom@0 {
compatible = "atmel,at25";
reg = <0>;
- spi-max-frequency = <1000000>;
+ spi-max-frequency = <10000000>;
};
};
@@ -3932,7 +3932,7 @@ eeprom@0 {
compatible = "atmel,at25";
reg = <0>;
- spi-max-frequency = <1000000>;
+ spi-max-frequency = <10000000>;
};
};
@@ -3949,7 +3949,7 @@ eeprom@0 {
compatible = "atmel,at25";
reg = <0>;
- spi-max-frequency = <1000000>;
+ spi-max-frequency = <10000000>;
};
};
@@ -3966,7 +3966,7 @@ eeprom@0 {
compatible = "atmel,at25";
reg = <0>;
- spi-max-frequency = <1000000>;
+ spi-max-frequency = <10000000>;
};
};
};
diff --git a/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi b/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
index 44e48e39e6e96..e11354bb384c2 100644
--- a/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
+++ b/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
@@ -94,7 +94,7 @@ eeprom@0 {
compatible = "atmel,at25";
reg = <0>;
- spi-max-frequency = <1000000>;
+ spi-max-frequency = <10000000>;
};
};
@@ -110,7 +110,7 @@ eeprom@0 {
compatible = "atmel,at25";
reg = <0>;
- spi-max-frequency = <1000000>;
+ spi-max-frequency = <10000000>;
};
};
@@ -127,7 +127,7 @@ eeprom@0 {
compatible = "atmel,at25";
reg = <0>;
- spi-max-frequency = <1000000>;
+ spi-max-frequency = <10000000>;
};
};
@@ -144,7 +144,7 @@ eeprom@0 {
compatible = "atmel,at25";
reg = <0>;
- spi-max-frequency = <1000000>;
+ spi-max-frequency = <10000000>;
};
};
};
@@ -261,7 +261,7 @@ eeprom@0 {
compatible = "atmel,at25";
reg = <0>;
- spi-max-frequency = <1000000>;
+ spi-max-frequency = <10000000>;
};
};
@@ -277,7 +277,7 @@ eeprom@0 {
compatible = "atmel,at25";
reg = <0>;
- spi-max-frequency = <1000000>;
+ spi-max-frequency = <10000000>;
};
};
@@ -294,7 +294,7 @@ eeprom@0 {
compatible = "atmel,at25";
reg = <0>;
- spi-max-frequency = <1000000>;
+ spi-max-frequency = <10000000>;
};
};
@@ -311,7 +311,7 @@ eeprom@0 {
compatible = "atmel,at25";
reg = <0>;
- spi-max-frequency = <1000000>;
+ spi-max-frequency = <10000000>;
};
};
};
diff --git a/arch/arm/boot/dts/aspeed/ibm-power10-quad.dtsi b/arch/arm/boot/dts/aspeed/ibm-power10-quad.dtsi
index 57494c744b5d0..0ffb4ae6423fc 100644
--- a/arch/arm/boot/dts/aspeed/ibm-power10-quad.dtsi
+++ b/arch/arm/boot/dts/aspeed/ibm-power10-quad.dtsi
@@ -744,7 +744,7 @@ eeprom@0 {
compatible = "atmel,at25";
reg = <0>;
- spi-max-frequency = <1000000>;
+ spi-max-frequency = <10000000>;
};
};
@@ -760,7 +760,7 @@ eeprom@0 {
compatible = "atmel,at25";
reg = <0>;
- spi-max-frequency = <1000000>;
+ spi-max-frequency = <10000000>;
};
};
@@ -777,7 +777,7 @@ eeprom@0 {
compatible = "atmel,at25";
reg = <0>;
- spi-max-frequency = <1000000>;
+ spi-max-frequency = <10000000>;
};
};
@@ -794,7 +794,7 @@ eeprom@0 {
compatible = "atmel,at25";
reg = <0>;
- spi-max-frequency = <1000000>;
+ spi-max-frequency = <10000000>;
};
};
};
@@ -1117,7 +1117,7 @@ eeprom@0 {
compatible = "atmel,at25";
reg = <0>;
- spi-max-frequency = <1000000>;
+ spi-max-frequency = <10000000>;
};
};
@@ -1133,7 +1133,7 @@ eeprom@0 {
compatible = "atmel,at25";
reg = <0>;
- spi-max-frequency = <1000000>;
+ spi-max-frequency = <10000000>;
};
};
@@ -1150,7 +1150,7 @@ eeprom@0 {
compatible = "atmel,at25";
reg = <0>;
- spi-max-frequency = <1000000>;
+ spi-max-frequency = <10000000>;
};
};
@@ -1167,7 +1167,7 @@ eeprom@0 {
compatible = "atmel,at25";
reg = <0>;
- spi-max-frequency = <1000000>;
+ spi-max-frequency = <10000000>;
};
};
};
--
2.39.3
next prev parent reply other threads:[~2024-06-05 21:23 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-05 21:22 [PATCH v4 00/40] fsi: Add interrupt support Eddie James
2024-06-05 21:22 ` [PATCH v4 01/40] fsi: hub: Set master index to link number plus one Eddie James
2024-06-05 21:22 ` [PATCH v4 02/40] fsi: Move slave definitions to fsi-slave.h Eddie James
2024-06-05 21:22 ` [PATCH v4 03/40] fsi: Fix slave addressing after break command Eddie James
2024-06-05 21:22 ` [PATCH v4 04/40] fsi: Use a defined value for default echo delay Eddie James
2024-06-05 21:22 ` [PATCH v4 05/40] fsi: Calculate local bus clock frequency Eddie James
2024-06-05 21:22 ` [PATCH v4 06/40] fsi: core: Improve master read/write/error traces Eddie James
2024-06-05 21:22 ` [PATCH v4 07/40] fsi: core: Add slave error trace Eddie James
2024-06-05 21:22 ` [PATCH v4 08/40] fsi: core: Reset errors instead of clearing interrupts Eddie James
2024-06-05 21:22 ` [PATCH v4 09/40] fsi: aspeed: Add AST2700 support Eddie James
2024-06-05 21:22 ` [PATCH v4 10/40] fsi: core: Add slave spinlock Eddie James
2024-06-05 21:22 ` [PATCH v4 11/40] fsi: core: Allow cfam device type aliases Eddie James
2024-06-05 21:22 ` [PATCH v4 12/40] fsi: core: Add common regmap master functions Eddie James
2024-06-05 21:22 ` [PATCH v4 13/40] fsi: core: Disable relative addressing during scan Eddie James
2024-06-05 21:22 ` [PATCH v4 14/40] fsi: hub: Use common initialization and link enable Eddie James
2024-06-05 21:22 ` [PATCH v4 15/40] fsi: aspeed: " Eddie James
2024-06-05 21:22 ` [PATCH v4 16/40] fsi: aspeed: Remove cfam reset sysfs file in error path and remove Eddie James
2024-06-05 21:22 ` [PATCH v4 17/40] fsi: aspeed: Refactor trace functions Eddie James
2024-06-05 21:22 ` [PATCH v4 18/40] fsi: aspeed: Don't clear all IRQs during OPB transfers Eddie James
2024-06-05 21:22 ` [PATCH v4 19/40] fsi: aspeed: Only read result register for successful read Eddie James
2024-06-05 21:22 ` [PATCH v4 20/40] fsi: aspeed: Switch to spinlock Eddie James
2024-06-05 21:22 ` [PATCH v4 21/40] fsi: aspeed: Disable relative addressing and IPOLL for cfam reset Eddie James
2024-06-05 21:22 ` [PATCH v4 22/40] fsi: aspeed: Use common master error handler Eddie James
2024-06-05 21:22 ` [PATCH v4 23/40] fsi: core: Add interrupt support Eddie James
2024-06-05 21:22 ` [PATCH v4 24/40] fsi: aspeed: " Eddie James
2024-06-05 21:22 ` [PATCH v4 25/40] fsi: hub: " Eddie James
2024-06-05 21:22 ` [PATCH v4 26/40] i2c: fsi: Calculate clock divider from local bus frequency Eddie James
2024-06-05 21:22 ` [PATCH v4 27/40] i2c: fsi: Improve formatting Eddie James
2024-06-05 21:23 ` [PATCH v4 28/40] i2c: fsi: Change fsi_i2c_write_reg to accept data instead of a pointer Eddie James
2024-06-05 21:23 ` [PATCH v4 29/40] i2c: fsi: Remove list structure of ports Eddie James
2024-06-05 21:23 ` [PATCH v4 30/40] i2c: fsi: Define a function to check status error bits Eddie James
2024-06-05 21:23 ` [PATCH v4 31/40] i2c: fsi: Add boolean for skip stop command on abort Eddie James
2024-06-05 21:23 ` [PATCH v4 32/40] i2c: fsi: Add interrupt support Eddie James
2024-06-05 21:23 ` [PATCH v4 33/40] fsi: hub master: Reset hub master after errors Eddie James
2024-06-05 21:23 ` [PATCH v4 34/40] fsi: core: Add master register read-only sysfs Eddie James
2024-06-05 21:23 ` [PATCH v4 35/40] fsi: core: Add slave " Eddie James
2024-06-05 21:23 ` [PATCH v4 36/40] fsi: i2cr: Adjust virtual CFAM ID to match Odyssey chip Eddie James
2024-06-05 21:23 ` [PATCH v4 37/40] fsi: core: Add different types of CFAM Eddie James
2024-06-05 21:23 ` [PATCH v4 38/40] spi: fsi: Calculate clock divider from local bus frequency Eddie James
2024-06-05 21:23 ` [PATCH v4 39/40] ARM: dts: aspeed: P10 and tacoma: Set FSI clock frequency Eddie James
2024-06-05 21:23 ` Eddie James [this message]
2024-06-06 1:02 ` [PATCH v4 00/40] fsi: Add interrupt support Andrew Jeffery
2024-07-01 15:29 ` Eddie James
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240605212312.349188-41-eajames@linux.ibm.com \
--to=eajames@linux.ibm.com \
--cc=alistair@popple.id.au \
--cc=andi.shyti@kernel.org \
--cc=andrew@codeconstruct.com.au \
--cc=broonie@kernel.org \
--cc=jk@ozlabs.org \
--cc=joel@jms.id.au \
--cc=lakshmiy@us.ibm.com \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-fsi@lists.ozlabs.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=ninad@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).